Change the broken LCD?

Similar Questions

• Satellite Pro U300 - the broken LCD screen

  Hi all

  My first post please bare with me.

  I have a Satellite Pro U300, who has a broken LCD screen.
  I have a replacement screen, but not sure how to go abouts it change places.

  Someone at - it a service manual for this model or the tricks and tips on how to disassemble the unit to swap the LCD broke with a new one?

  Any help would be greatly appreciated.

  The service manual can be downloaded. It s not for the public and it s only for Toshiba and approved providers available I think.
  On the Toshiba site, you can download the user manual, but I doubt it would be useful for you.

  I think the best way would be if you go to an authorized service provider. The exchange of the LCD is a little tricky and you should have experience with this.
  On the Toshiba site, you can search for an ASP. I m sure that the technicians will help you. ;)

• change the display LCD R60 - compatibility issue

  Hello I need to change my 15 "R60 sxga display, as it is used is dying. After searching some information on screens thinkpad I'm confused. Thinkwiki mentions R60 has LG - Philips LP150E07, but I am unable to find such screen. So I wonder if LP150E05 (probably LP150E05-A2K1) of the N150P3-L01 of T43 T60 will work without problems. I have found that to replace poster may nequire the EDID Flash, but I don't know how I could do and where to find the needed firmwares. Could someone enlighten me on this?

  LCD for R60 will work in the T60, while the LCD from the T43 only works in the T60 with a mod EDID.

• Change the LCD for Qosmio X 870

  Hi all!

  For 3 weeks, I have several dead pixels black on the upper right corner of my screen as you can see on the picture:
  http://img4.hostingpics.NET/pics/312977IMG20150221110903.jpg

  I want to change the screen.
  My native resolution is px 1600 * 900 WXGA but I want to upgrade to 1920 * 1080!

  I just want to know if my hardware is capable of managing the new resolution.

  As my choice is on this screen:
  [http://www.ebay.co.uk/itm/17-3-1920x1080-LED-Screen-for-TOSHIBA-QOSMIO-X875-Q7290-LCD-LAPTOP-/331460952379?ssPageName=ADME:X % 3Cimg % 20src =]

  You can read it is Toshiba X 875 X 870, but is that a problem?

  Thank you very much for your answers!

  The NVIDIA GeForce GTX 670 M is able to handle the resolution.

  The details of the nvidia page here:

  Maximum digital resolution - up to 2560 x 1600
  Maximum VGA resolution - up to 2048 x 1536

• Change the LCD

  Hi again,

  I think I've had a few 'Thinkpadmania '... I bought a cheap A31p ($99), 80 Gb HD, 256Ram and 15 "LCD (at least that was the description on ebay) the laptop arrived yesterday with a 14" screen, and installed Win XP. No, the model is AUU 2653. According to Lenovo's an A31. The good thing is that it works. The ATI graphics card displays its parameters that she can go to a resolution of 1600 x 1200. Can I change the LCD screen with a 15 "UXGA of an A31p?

  George

  You need the whole cover, including the inverter and the LCD cable. Covers are not interchangeable on 14 "and 15" A3x units, and locks are in different places as well... so you will need the framework of keyboard too...

  Not worth it in my opinion and I love A3x machines...

• How do I change the input on the LCD 65 profile Cisco

  We recently had a Cisco TelePresence given 65 profile system. We have all the documents and I could not find instructions on the lcd screen. The screen has several entries and RS232. I would like to know how to change the input to the screen. Could someone explain to me how it would happen? I guess its more rs232 because I can't find any button on the unit. Is there an API for the screen? What are the communication settings for the screen?

  Any help is appreciated more.

  Thank you

  James

  Double post - see https://supportforums.cisco.com/discussion/12742796/how-change-input-cisco-profile-65-lcd-screen

• How to change the text in a form published in LCD / Acrobat 9?

  I have therefore some minor changes to a form that was created in LCD 9 and Acrobat 9 Pro.  Apparently, this seemingly simple task is now impossible with the newer versions.  When I try to edit in Acrobat XI I get the message "this form cannot be changed in Acrobat" but I have no way to change the text on LCD.

  Users of release forms 9 really blocked?

  Yes, it looks like you used to be able to directly edit the pdf 'work' base layer in a LCD pdf.

  The painful solution was to:

  (1) copy the shape of the LCD for a background version

  (2) select and delete ALL the objects in the LCD screen of the form of the background

  (3) use print-to-pdf to create a non - LCD of the shape of the background version

  (4) clean form pdf print background objects,

  (5) use Acrobat XI to edit the text

  (6) open the original form in LCD and then edit-> work replace to replace the background pdf with the updated release of step 5

  (7) maintain the layer background for the changes to come

  This is quite annoying, because with the old version was the only step:

  (1) open the pdf in Acrobat and edit text

  In any case, thanks for the info. I'm not sure what was the logic behind this downgrade XI, but it was enough of a very negative experience that I'll do everything I can to avoid pdf for Adobe products in the future.

• I use a 27 "lcd screen and I can not change the resolution, the slider will not slip off, also windows is a generic monitor, I need to change for aero to work

  I want aero to work but also to set up a game for my kids fisher price system but I need to change the resolution in order to make it work and trying to drag the slider, he's not moving that I also need to change to 32 bit which I'll beable when I change the resolution.  the settings suggested for my monitor is higher they have the value but I can't change.

  Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  Then:

  http://Windows.Microsoft.com/en-AU/Windows-Vista/change-screen-resolution

  Change the screen resolution

  Screen resolution refers to the clarity of the text and images on your screen. At higher resolutions, items appear sharper. They appear also smaller, so more items adapted to the screen. At lower resolutions, fewer items adapted to the screen, but they are larger and easier to see. At very low resolutions, however, images may have serrated edges.

  See you soon.

  Mick Murphy - Microsoft partner

• HELP PLEASE! I lost about 400 GB of MP4 (film and audio book) using Chkdsk files. He repaired broken sectors/files regardless, but it changed the extentions. How can I find new extensions? they are there, but I don't know how to find them.

  I have Vista Home Premium. I have a huge media collection for my ipod. I save all my video files and files on an external hard drive (my book 500 GB) audiobook while they clutter up my internal drive and so I can store them where my internal drive has failed somehow... Well I got the opposite happens. I started to get my video files would not open in their records. I ran Chkdsk utility to "fix" the files. When the program has finished running he had a Msg: something has changed the names of files and everything I was supposed to go to the files and the rear switch (as far as I can remember... I don't wear SPECIAL attention for the MSG that I thought it was normal and the program would take me to the files when it was done... ERROR. All desktop shortcuts no longer find files directly by going to my computer, then by looking at the HD I cannot find the files.  I used the program REcuva file hippo and it restores the few files that have been deleted out of the dirve and allowed to see some of the video files and audio books (but no tag info remained on the recovered files. I had to so I would like to know what they rename them). Other than these few files... less than 20 I t help either. Records that they are still there, but it asks me to open files with a program from a list of choices and not of the program draw files. (the choice to choose this high program open this type of file is also blacked out). Also when I run the cursor over the records of the size of the files do not match wat I know should be in the files. But if I just look at the my computer screen and run the cursor over the icon of the letter itself it show that there is 435 + GB hard disk info and 50 + GB of space left on it.
  A few questions:
  1. is it possible to see all the possible msg that the command chkdsk can generate so I can find that he gave me when he fixed my files?
  2 - How can I find these files if I don't know the extensions I'm looking for? they were for quicktime mp4 files, but I don't know now.
  3 - If the drive to my drive internal and try to list the backup files is located on the drive where I'd start trying to open the files?
  4 do I just need to cut my losses and reformat the hard disk, crying over 2 years, he took me to build the library and start over again >? (at least I kept some of my files from itunes library since itune on DVD about 1.5 years ago (about 300 GB of data there))
  And by the way the reader is set up to the FAT 32 format, that I did not know until this all happened.

  Go to start / Control Panel / folder Options / View and uncheck Hide extensions for known file types.  You should also check the box to see the system and hidden files while you're there.  This should show you the extensions of all files if that is the problem.  You can then rename the files for extensions are associated with a program that will open and read the files (you may need to experiment first with some programs to find one that works and an extension that works if they have been changed).  I don't know any way to do this for all files at once - they will have to be renamed individually (yes - I realize counts the number of files involved, but I know of no program in Vista or even a 3rd party program that will change the extensions for a group of files at a time - you can check for yourself on www.tucows.com and www.download.com).

  Desktop Shortcuts no longer work because either the file type of the source file has changed and the shortcut does not open the file, or because the file has been moved and the shortcut can not find the path.  You should be able to check the path by finding files (whatever they are now called) and see if they are in the same directories in path as they were before this happened.  I think it's because the source file works more correctly because of the extension (or corruption).

  Recuva to recover lost or deleted files - not the files that are on the system (and you won't not solve your problem by deleting them and then use Recuva to recover because it sounds like the problem is with the extensions and Recuva is not going to be able to correct it (it is not part of his program)).

  There's no list of ALL possible messages that might be generated by chkdsk I know.  Here is an article on the chkdsk command works in XP and some messages it generates - but far from everything and nothing look like the one you receive (and it works essentially the same under Vista): http://www.isd518.net/District/TechDir/Help/Chkdsk.htm.

  The backup on your internal hard disk drive will not solve the problem - just move it.  The 'damage' to the files are already done a backup now will not solve anything.  The fact that the drive is set up in format FAT32 is not the question (and probably not the question in the first place is) and change to NTFS now is not going to solve the problem (although you can do that after all this has been resolved).

  I won't tell you to cut your losses - this is a pretty drastic step and there may still be other options (although I don't know myself).  You can take the reader to a recovery expert data (NOT Geek Squad or one of these other major centres to store) which may be able to recover some, most, or all files.  It will be expensive and only you can decide if it's worth the cost.  These people usually the game fee and do not offer a guarantee of recovery - even if they don't recover anything you always pay.  The decision is yours.

  If none of this works, transfer your question in images and videos Forum at: http://social.answers.microsoft.com/Forums/en-US/vistapictures/threads where people who specialize in issues related to the video may be able to help with your problem, since it's video files.

  I hope this helps.

  Good luck! Lorien - a - MCSE/MCSA/network + / A +.

• Satellite M70 354: how to change the display?

  Hello!
  My TFT-Display of my Satellite M70 354 is physically broken. So I need a new. The Servicepartner costs of a new view without working time are EUR 450,-(!). It's too.

  Is a change to myself as possible, or is it very difficult? On Ebay, I found a screen, compatible with an M70... What is important in changing the display?

  Maybe you can help me.
  Thank you!

  You should know that the display is one of the parties outside the laptop computer motherboard expensive.
  The costs are huge, as you can see. Of course the 450 bugs is too but it is a new LCD and additional, you will pay for the technician.

  That is why it s a good idea to look for second hand unit. The replacement of the screen is a little tricky. You must remove the plastic frame that attaches around the screen.
  The display is usually fixed with 6 screws and connected to the Board of Directors and FL inverter.

  I think that you should not replace yourself. I see that you have no much experience on these replacements. So the best idea is to buy a second hand laptop but then to ask a technician for replacement.

• Tecra S11 - broken LCD

  Good afternoon

  I have a toshiba tecra s11-128 with broken LCD screen.
  This model has an LCD with a resolution of 1366 * 768.

  The same series (example: S11 - 11 d) was also equipped with the LCD HD + (1600 * 900)

  I can replace it with HD + LCD screen (resolution of 1600 * 900)?

  Thanks for any response.

  You are right. both models have different LCD displays but the same graphics card. I can't say for sure, but I'm sure you can use the HD screen + with your laptop.

• Satellite Pro S330 - how to change the supervisor password?

  Hello!

  On a Satellite Pro S330L Windows is broken, so I can't access TOSPU. EXE. If I know the supervisor password, I can't enter the BIOS program. Bootsequence is HDD-..., so I can't boot from DVD! What can I do to install a new OS?

  Thanks for your help! JO

  Hi jonol,.

  If you know the supervisor password, everything is ok. Just so access the BIOS after you turn on the laptop and enter the password. Now you are in which you can change the BIOS boot order, remove the supervisor password, etc..

  Check this box!

• HP dv8: when I change the screen map black mother

  Hello, my pc model is hp dv8.it have a problem on the power button is not open.then I try to change again motherboard.but there a problem.it opens, but showing black commandes.sur not my motherboard is 573758 - 001.and now, I use 591382 - 001.i might think motherboard problem, but im not sure.so can u give me a solution?

  I do this solutions-

  1 change the ram

  2 bios reset 60 sec

  3. try a different monitor

  You have questions that are beyond the scope of this forum.

  You have changed a systemboard and used the wrong part number. The motherboard you have used is for a computer laptop touchsmart dv8t, not a computer laptop dv8. This makes the troubleshooting your own question, because there are so many things that you have not made correctly.  If your laptop was not the touchsmart dv8t model, then there is a problem with the connector that connects the LCD screen and the motherboard. This is probably your biggest problem is.

  What is the number of complete product or the name of the product from your laptop?

  DV8 is a series of models which includes a portable, including version touchsmart allowed that you have installed.

  

• The broken on Satellite 3000-100 keyboard

  Hello, I have a problem with my laptop satellite keyboard. Some keys are broken and I want to replace them, but it's really hard. Now I want to change the keyboard, but I don't know how to do this.

  What I have to call a technician to Toshiba or can I change myself?

  I'm sorry for my bad English ;)

  Thanks, Luca

  Hello

  > Do I need to call a technician to Toshiba or can I change myself?
  Usually, you should always contact the technicians for laptop for these jobs. I mean there is a small risk that you could damage other parts.

  On the other hand if you have a good laptop experience you might also replace the keyboard.
  What you need is a compatible keyboard.
  It could be ordered in the Toshiba ASP in your country.

  The keyboard is closed by 4 screws that are hidden under the plastic cover.
  Pull the right side on the cover of the band and lift. But be careful because of the cable on the right side. Then gently release the cable from the connector on the tape cover, then lift the cover of the band on.
  Remove the four keyboard screws that attach the keyboard and then slide the keyboard toward the back until the keyboard cable is released under the superior logic.
  Disconnect the keyboard connector and second VGA connector, then lift the keyboard up and out.

  The procedure is not difficult for someone who has already disassembled a laptop. But once again; If you don t have the necessary experience, then don t go and ask a technician for help.

  Good bye

• I need to change the keyboard on Tecra M5

  Hello

  I need to change the keyboard on a tecra m5.
  Unfortunately, this is not mentioned in the manual how to do this.

  Please advice.

  Thanks in advance for your help.

  Best regards
  Wim Gijsels

  Hello

  I think that it s not mentioned in the manual, because I should only be made of professional technicians for laptop

  In any case, a friend of exchanged me the keyboard and told me to remove the keyboard first support. Who s the plastic cover between the keyboard and LCD display. So open the LCD screen and use your fingers on both sides and lift the keyboard bracket. There are two screws that attach the keyboard under the door-keyboard. Remove the two and lift the keyboard. Last but not least remove the keyboard plate to remove the cable from the keyboard connector.

  As you can read it's not that complicated and I hope I could help a bit! :)