"Change the graphics card" spam message when you are connected to the AC adapter / CC

Similar Questions

• the pop up Windows Defender when you are connected to the internet by dial-up readings; change of system in known application, type of change; running applications, cwindowssystem32mswsockdll, I am disconnected and then reconnected___

  the pop up Windows Defender when you are connected to the internet by dial-up readings; change of system in known application, type of change; running applications, cwindowssystem32mswsockdll, I disconnected and then reconnected.

  I just ran windows update on a large number of files all successful before this happened, it happens when I am connected to the internet, I use dial-up access

  added on 25/11/09 still have the problem mentioned above, even explore two windows are runnibg on the system, or two IE browsers running?

  Added 27/11/09 I ave followed all instructions up to and including thefix tool kb/93623, stiil I have this report of windows Defender quickly appearing twice in a row, then I'm disconnected from the internet. any more ideas thanks sam

  Visit this link:
  http://support.Microsoft.com/kb/936213

• Why the last OS update cost me gigabytes of data when you are connected directly to my computer and ISP via Itunes February 29, 2016

  Why the last OS update cost me gigabytes of data when you are connected directly to my computer and ISP via Itunes.  29 February 2016

  While it is connected to ITunes via my Dell system, I was informed of the latest OS update for my IPhone 6.  I decided that the direct connection to the internet would be the fastest way to download and install the software.  During the process I started to have some warning of our AT & T account that I approach the limit of our data plan, then in quick succession, only warnings, said I've reached the limit and then passed in the data, limit charges.  At the time it was done, I had accumulated more than 2 gigabytes of additional data charges.

  Until that point, I was very pleased with the device and confident in the ability to use Wifi and data.  Due to this incident, I became very suspicious of the camera and the huge potential for data overcharges. It is extremely disconcerting as it happened while it is directly connected to the internet using my computer at home.

  Please note that, in the episode my ISP and the computer is remained connected to the WEB with no sign of connectivity issues.

  Someone at - he had a similar experience and understand what went wrong?

  Thanks for your support,

  Jerry

  JerrolK wrote:

  Why the last OS update cost me gigabytes of data when you are connected directly to my computer and ISP via Itunes.  29 February 2016

  While it is connected to ITunes via my Dell system, I was informed of the latest OS update for my IPhone 6.  I decided that the direct connection to the internet would be the fastest way to download and install the software.

  You have chosen the option of direct download, you have received a message of warning from AT & T about it yet.

  He did what you asked it to do.

• The battery on my Toshiba NB500 has not been charged since one should use it when you are connected to the power. The battery in the tool bar icon indicates charge but is always 0% available.

  The battery on my Toshiba NB500 has not been charged since one should use it when you are connected to the power. The battery in the tool bar icon indicates charge but is always 0% available. What could be the problem and how can I solve it?

  A problem better put to the support of Tosh or their forums, with regard to their equipment, not MS or Win

• Internet goes when you are connected to wifi

  Bought an iMac on eBay this week, works fine apart from a problem I encounter with internet stall, which really starts to get boring!

  It's an iMac, mid-2011, with OS X el Capitan 10.11.3 installed and put to update to the most recent update.

  The question...

  When you are connected to our home network (Sky Broadband) I get internet access for 5 minutes for an hour then stop him internet but the wifi is connected. At this point if I check all other computers/phones/tablets on the network that they are all still connected to the internet with absolutely no problem.

  The temporary solution...

  If I disable the wifi on my iMac and then back on again once it reconnects immediately and internet works fine still a time - until it stops!

  What I tried...

  Restart the mac repeatedly

  Restarted the router again

  In network settings, advanced on the mac, I renewed the DHCP lease (loads of times - note it always seems to come back with exactly the same ip address - I guess it's good?), updated the DNS (last post I read said to use 2.4.4.2 so am currently on that), tried to manually set the MTU to 1453, I deleted all the other networks stored outside my home network Too much.

  Does anyone have any suggestions please for all messages that have worked for them, or things that I could try?

  Thanks a lot for your help

  Joe

  Did you erase the internal drive and install OS X yourself? Did you run the hardware test? If this isn't the case, please do both.

• Copy-hard drive when you are connected to vCenter

  Y at - it a command to copy a virtual disk when you are connected to the server vCenter instead of being directly connected to each ESX Server?

  Thank you

  KeV

  You can use the cmdlet Copy-DatastoreItem but there are a few known issues with this cmdlet when the current generation.

  Or you can use the underlying CopyDatastoreFile_Task method.

  Note that you need to copy all the files (header & flat file) that make up a vDisk yourself!

  ____________

  Blog: LucD notes

  Twitter: lucd22

• Why do I get the access denied error message when you are logged in as administrator?

  "Error" failed to create the file 'C:\Windows\Fonts\[font name]. " Access is denied. "

  is received when I try to install a font by being logged on as administrator (I'm the only person who uses this)
  computer with password protection guest no account)

  or when I use WinZip the fonts folder is not available

  The fonts folder is blocked with a "read-only" access  I can't find any way to change the permissions on the folder (there is no security tab), and any attempt to change the status of reading is has met an insufficient privileges error message.  I notice that the fonts have been added during the last few days several times but I have nothing personally for it - he did alone (how I don't know).  I admit be baffled by your inability to add fonts using your CD (even though I'm reasonably sure it's read-only permission which is at the origin of the problem). I use Vista Business SP2 32-bit and my comments were based on it.  I never really tried to install fonts on my system, so I don't know if I would have the same problem - I presume that I would give for the same reasons.  The article I posted http://windows.microsoft.com/en-US/windows-vista/Install-or-uninstall-fonts explains how to install individual fonts in formats of special fonts - it does not how to do when you use a CD with an install button.  Have you tried right-clicking on the button install to see if it brings up the run as Administrator option (it probably won't)?  Here is another article on how to install fonts: http://www.lytebyte.com/2007/07/03/how-to-install-new-fonts-in-windows-vista/.  If you link to the CD player will be able to see the individual fonts and "select all" or according to which you want to install - instead of using the installation with the CD button (if you can find the right folder (s)).  Here is an article from third on the installation of the http://www.windowsreference.com/windows-vista/how-to-install-fonts-in-vista/ fonts that suggests using the install button should work as should drag / drop it into the fonts folder - thought we seem to be having trouble with these procedures (and I think he did the permissions block which I can't imagine why he's here or why there is no security tab allows you to adjust).

  Maybe someone with more knowledge (like Engineer Support or an MVP) see this thread and respond with a solution.  In the meantime, I'm puzzled.

  Good luck! Lorien - a - MCSE/MCSA/network + / A +.

• El capitan crashes when you are connected to the internet ONLY

  If not connected to the internet, the computer will run all day without any problem, any help would be great, thanks

  These must be run as administrator. If you have only one user account, you are the administrator.

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  In the Console window, select

  DIAGNOSIS AND diagnostic USE information reports ▹ System

  (not diagnose them and use Messages) in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu bar.

  There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points downwards. You will see a list of reports. A report of panic has a name that begins with "Kernel" and ends with ".panic." Select the most recent. The content of the report is displayed at right. Allows you to copy and paste to validate all of the content, text, not a screenshot.

  If you don't see any report, but you know, there was a panic, you have chosen diagnostic and using the list of Log Messages. INFORMATION on the USE of DIAGNOSTIC AND choose instead.

  In the interest of privacy, I suggest that, before posting, you change the UUID ' anonymous, ' a long string of letters, numbers and dashes in the header of the report, if it is present (it cannot be). "

  Please do not post other types of diagnostic report.

  I know that the report is long, perhaps several hundred lines. Please report all this anyway.

  When you post the report, an error message may appear on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• WLAN speed when you are connected to the internet

  I use WRT54G2 V1 Wireless Router. My firmware version is 1.0.04)is.

  I connect to the internet via ADSL.

  Both computers are connected to the router, we have a connection cable, other is connected wireless.

  If I'm not connected to the internet, I can transfer files between them through 1.5MB/s-2MB/s. But, if I'm connected to the internet, the speed drops to 100 KB/s - 200 KB/s. My adsl connection has a bandwidth of 1 Mbps (about 128 KB/s).

  Has anyone faced similar problem? No idea what to do?

  You said that you receive the Internet wireless at 100-200 Kbps (kilobytes per second), but I guess you're saying 100 to 200 Kbps (kilobits per second).  If you actually get 100 to 200 Kbps, so it is faster than your reported 1 Mbps line speed.

  A wireless connection is more important than a wired connection.  If most users, when connected wireless, get only about 50% to 70% of their wire speed.  So I'm expecting a 1 Mbit/s connected to the Internet, you should be able to get 500 to 700 kbps (kilobits per second) = approximately 50 to 70 Kbps (kilobytes per second) when connected wireless.

  When you file transfer from computer to computer on your local network, your speed is limited by 54 Mbps Wireless g your connection speed, which can provide a data rate up to 20 to 25 Mbit/s.  It is clearly much faster that your 1 Mbit/s to the Internet can provide data.  So that explains why the transfer of files on your local network is much faster than your wireless Internet connection.

  So, the only real problem I see is that your speed of your WAN (Internet) port to the wireless local area network computer seems to be slow.  The most common cause of this problem, is the default to reset the router by default after a firmware update.

  If you did not reset to the factory settings since the last update of the firmware, please do it now and see if it solves your problem.  After the reset, you must configure the router again from scratch.  If you have saved a router configuration file, DO NOT use it.

  To reset your router by default, follow these steps:

  (1) turn off all computers, the router and the modem and disconnect from the wall.
  (2) disconnect all the wires of the router.
  (3) turn on the router and let it start up completely (1-2 minutes).
  (4) press in and hold the reset for 30 seconds button, then release it, then let the router reset and restart (2-3 minutes).
  (5) turn the router.
  (6) connect a computer cable to port 1 of the router (NOT to the internet port).
  (7) turn on the router and let it start up completely (1-2 minutes).
  (8) the power of the computer (if the computer has a wireless card, make sure it's off).
  (9) try ping on the router. To do this, click the 'Start' button > all programs > Accessories > command prompt. A black DOS window will appear. Enter the following text: "ping 192.168.1.1" (without the quotes) and press the Enter key. You will see 3 or 4 lines that begin with ' response to... ". "or"Request timed out". If you see "reply from...". ", your computer has found your router.
  (10) open your browser and point it to 192.168.1.1. This will take you to the login page of your router. Leave the user name blank and in the password field, enter "admin" (without the quotes). This will take you to your router configuration page. Note the version number of your firmware (usually found near upper right corner of the screen). Exit your browser.

  If you get this day without problem, try the Setup disk (or configure the router manually, if you prefer) and see if you can get your work and router configuration.

  If you can not ' response to... ". "in step 9 above, your router is probably dead. A report with this problem

  If you get a response in step 9, but cannot complete step 10, is that your router is dead or the firmware is damaged. Related to this issue.

  If you need additional assistance, please indicate your ISP, the make and model of your modem, the firmware version of your router and the results of steps 9 and 10. In addition, if you receive error messages, copy them exactly, and report.

  Please let me know how things turn out for you.

• Windows 7 - why the priority of network adapter is ignored when you are connected to the area on a lower priority NIC?

  I have two network cards installed on my laptop.  I wanted to test and see how Windows 7 Ultimate managed the priority of the network adapters so I connected to a small Internet (NIC B) router, and the other on my domain (NIC A).
  First of all, it was a pain to find network adapter priority.  After some research and fun Google I found this.  Unfortunately, the search bar has not helped.
  Control Panel-> network and Internet-> view network status and tasks-> to modify the adapter-> Hold down 'alt' to bring up the menu "File"-> select 'Advanced'-> select 'Advanced settings' in the menu drop-down-> adjust your priorities of the adapter in the 'Advanced settings' window, under the tab "maps and links.

  With "B NIC", defined as the highest priority, I tried to browse the internet.  It was impossible to travel.  Then I disabled 'NIC A' (the NIC domain) and I can browse the internet.  Windows XP he handled this much better.

  Select 'NIC A', and then check 'NIC B' is the highest priority.  Then try tracert on www.google.com.  It refreshes my domain as the first hop router.  It seems to be completely ignoring 'NIC B', unless I have disable 'NIC A' completely.

  In case someone of another Vienna here, looking for the answer to this, as I did, I thought that putting the real solution to this question.  Many web pages say to change the priority of going on network connections and change the order there to what you like.  You don't have to bother with this setting.

  It does not work. He has apparently no effect on the use of connections.

  What Windows actually uses is the metric value for network connections.  The lowest metric value is tried first.  In my case, I have a connection broadband shabby home, but I can attach wireless on my phone for occasional good bandwidth.  So, I want to always use the connected wireless and ignore the wired connection, but still the chance to printers and other things on my network cable at the same time.  I want to keep both on and not to disable the wired when I use my phone.

  To resolve this problem for real, go to and right click your Wi-wired adapters and one at a time to change the properties.  Select IPv4, click and then .  For each of them, disable the "Automatic metric" checkbox and set the metric value manually.  I put the wireless cable and 1-2, which gave me the behavior I wanted.

  The Automatic metric is defined by Windows based on the speed of connection and a wired connection is generally faster than a wireless one.

• Get an error 'internet service has stopped working"when you are connected to the internet

  * Original title: my computer keeps do not stay online, I always get a message saying that the internet service has stopped working and it will constantly, I could make dionostics but in vain

  My computer is not online, I get a message that says service is stopped, reconnection. I have DSL service and you run programs to detect a problem, but nothing is

  Hello

  1. which browser is installed on the computer?

  2. What is the full error message?

  3 is this a wired or wireless?

  4. that all the troubleshooting steps have done?

  5 have have there been recent changes made on the computer before the show?

  I suggest you follow the methods provided below and update us with the results.

  Note: If you are using internet explorer, follow the methods provided.

   

  Method 1: Verify the problem by running Internet Explorer mode without modules.

  Temporarily disable all add-ons to see if the modules are the origin of the problem.

  To temporarily disable all add-ons:

  a. click the Start button.

  b. click on all programs, accessories, and click on system tools.

  c. click on Internet Explorer (No Add-ons).

  If the Internet Explorer (No Add-ons) mode works very well then an add-on may be causing the problem. You will need to re-enable each (process of elimination) in order to determine which one is causing the problem.

  http://Windows.Microsoft.com/en-us/Windows7/Internet-Explorer-Add-ons-frequently-asked-questions

   

   

  Method 2: Optimize Internet Explorer and check.

   

  How to optimize Internet Explorer

  http://support.Microsoft.com/kb/936213/no

   

  Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  For more information, see the article and check.

  Tips for solving problems when Internet Explorer hangs or stops working

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-solving-problems-with-Internet-Explorer

  Why is my Internet connection so slow?

  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-Internet-connection-so-slow

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Let us know if it helps!

• Satellite Pro L300D started crashing when you are connected to the projector

  Hi all, I have a Satellite Pro L300D, have since January. In March of this year, it developed a problem.
  He began to turn the power on and off screen until I got the blue screen of death and had to reboot the laptop, also BIOS crashed. He was sent to Toshiba and got sorted.

  I use the laptop in the Church for the presentation to the powerpoint, we use a projector that connects to the video output on the laptop, but it has now begun to crash whenever I connect the projector to your laptop.

  Can I use the powerpoint, switch to the view of presenters and show the presentation of 30 minutes, then the screen goes black for about a second, the laptop and the projector off, then when they come again, I get a message saying that the display driver has been restarted, little after that the screen turns off, and then market / stop about six times before that I get the BSOD.

  Also, if I show a clip AVI or video during the presentation, it will crash soon after or even before its done.

  Have updated the drivers for laptop, I always get a message stating all the drivers are up to date and I am quite at a loss to know what to do next.

  To be honest, I'm so fed up with it that I am almost to the point of buying an Apple Mac Pro and away from Windows-based computers all together, my friends have macs and they never have any problem.

  Someone at - it an idea on what could be the problem?

  RGS
  James

  Hello James

  Can you please tell me what mode you are using for the presentation?
  Is that what this duplication mode (the same image on the LCD screen and the external device) or something else?
  Do you have problems if you use the single external device (LCD screen is OFF)?

  Movie files can be problematic if you run on laptops LCD and try to switch to the external display while the movie is running.

• Problem with sending a message when you're connected via Wi - Fi

  Hello. Still getting used to my Dext (owned it for about 4 days). I noticed this morning that I can't send the mail from the POP3 account, I set up on my Dext when I am connected via Wi - Fi - when I try I get an "authentication failure". When I disable Wi - Fi email sends end. There is no problem with webmail - send although I am connected to the Wi - Fi or 3 G network.

  Anyone know how to send the mail while POP3 on the Wi - Fi network? Thanks in advance...

  Understand the problem - port incorrect settin for mail server outgoing. Changed to 587 according to some messages that I saw during a search - that did the trick!

• What is the setting on a laptop to be able to close the cover when you are connected to a monitor?

  After a catastrophic situation on my laptop, I got the disc re formatted and reloaded a new operating system.

  I'm trying to rebuild.

  Previously, I had the configuration of the laptop so that when I closed the lid, it remained running so I can use my external monitor.

  Now when I close the lid, the laptop switches mode pause.

  I know there is a place to set up, but I'm not.

  Thank you

  Jack

  This requires that you are under W7.

  Go to "Control Panel" and find "Power Options."

  In the left column, find "closing the cover to choose."

  You will find what you need there.

• is there a remote desktop when you are connected to Windows Storage Server GUI

  original title: GUI of Windows Storage Server

  My apologies if this is a silly question. -What is the interface provided through office remotely when you connect to Windows Storage Server 2008 the typical Windows GUI?

  Thank you!

  This type of question would be better asked in the communities of support server TechNet or MSDN rather than in the community Windows Desktop customer support.