Similar Questions

• Startup problem: first black-wallpaper appears with the logo, and then the screen goes to the Microsoft screen with green moving bar "Please wait".

  My computer is having problems loading the main office. I start it up, the first black-wallpaper with the logo is displayed, then the screen goes to the Microsoft screen with the green bar of movement. After that, the Windows logo appears and makes the sound. A new screen will appear with a "start-up Fund" and he said: "Please wait...". "This form of lasting about 5 to 8 minutes, then the text disappears, with only the bottom upward. I left it sitting there on the blank screen for about 20 minutes, and still nothing changes. I tried Ctrl + Alt + Delete, and shows nothing. Finally restart manually, but the same problem occurs. The only way that this works is in Mode safe mode with networking (which is currently used). I also tried the system restore, but this does not work because by default it must go through the same problematic steps, as mentioned previously.

  Hi ninja_panda13,
   
  -Remember to make changes to your computer after that this problem started to happen?
   
  As you are able to boot mode safe mode with networking, put your computer in a clean boot state in order to verify if any third-party application is causing this problem.
   

  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See KB Microsoft article below for more information on how to solve a problem by performing a clean boot in Windows Vista or in Windows 7:How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• I just ran the last update for my iPad and now it just continuously reboots to the black screen with the Apple Logo. Hard restarting does not help, neither do not connect the camera to MacBookPro. Any ideas?

  I just ran the last update for my iPad and now it just continuously reboots to the black screen with the Apple Logo. I left plugged in all night and still no change. Hard restarting does not help, neither do not connect the unit to aMacBookPro. When I do this, iTunes complains that it can not connect because the iPad 'expires '. Now it is disconnected, but I can't turn it off. Even close the lid will not extinguish it. Any ideas?

  Try the following. It seems yo may have to let the battery drain is completely:

  - iOS: do not respond or does not light

  -Also try DFU mode recovery mode post-test

  How to put iPod touch / iPhone in DFU "Karthik doodles."

  -If failed and that you cannot completely turn completely the iOS device, leave the battery to drain completely. After loading a hour repeat the foregoing.

  -Try a different cable

  -Try on another computer

  S ' there is still not successful that usually indicates a hardware problem and an appointment at an Apple store Genius Bar is in order.

  Shop Apple Store - Genius Bar

• get a green screen with no video only sound

  Why do I get a green screen with no video only sound?  Is this a driver problem?

  Hello

  Try a new installation of the Flash plug-in as follows.

  First, download the Flash uninstall utility on the link below and save it in your downloads folder.

  Flash Player Uninstaller.

  Once the download is complete, close all the browser windows, open your downloads folder and run the program uninstaller.  Once done, restart the laptop.

  Then (unless you already have it), download and install Firefox , then using Firefox, download and install the latest version of Adobe Flash. Note: You can deselect the option to include McAfee Security Scan Plus before downloading.

  Close all browser windows before you run the installer of Flash.

  Start Firefox and see if the videos etc. play Ok in this browser - if they do, close Firefox, open Internet Explorer and click on the same link Adobe Flash above to get a command prompt to install the Flash component.  Once completed, restart Internet Explorer.

  Kind regards

  DP - K

• HP laptop: Video Green Screen with sound

  I just bought a HP laptop laptop 15-f111dx A8 series 8gm, 750 GB.  When you try to view videos on you tube or facebook I have sound but no picture, just a green screen.  I went online to try to find a solution and have upgraded Flash Drive. It worked once and after turning the computer and turn on again, he returned to green screen.  All the patches I've read on the internet are for older computers or another version of Windows. What can be done to correct this. A brand new computer should not be set up correctly before buy you?

  Hi @Novice60,.

  Thank you for visiting the Forums HP's Support and welcome. I'm sorry you are having problems with your new laptop HP 15-f111dx.  I looked into your problem with video does not properly or the green. Try clicking on the green screen, in the tab named storage Local and put 10 k and the green screen should disappear.

  Here is a link to the HP Support Assistant, if you need it. Just download and run the application and it will help with the software and drivers on your system that need to update the graphics driver may need to be updated.

  Have you tried another browser? This link will help you to upgrade your browser if necessary.

  I would like to know how this happens.

  Thank you.

• How can I change the home screen on Windows 7 Professional?

  The splash screen displays animation of 4 different colored when you start windows. Y at - there a way for me to change the image of the screen? The image has no animation.

  Hello

  Thanks for posting your query on the Microsoft Community.

  According to the description, I understand that you are facing problems with Windows.

  I would like to inform you that it is by default, you cannot change the splash screen image.

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• How to change the Welcome screen in my windows 7 ultimate 32 bit OS

  I am not able to change my wellcome screen in my laptop.

  Hi Raymond,

  Thanks for posting your query on the Microsoft Community.

  I understand that you can not change the Welcome screen in Windows 7.

  Provide us the following information to better help you.

  • You get the error message?
  • You will remember to do recent changes on the computer before this problem?

  I suggest you to check the solutions provided by MarkMadden and check if this may help:

  http://answers.Microsoft.com/enus/Windows/Forum/Windows_7-desktop/how-do-i-change-logon-screen-in-win-7-ultimate/cae8fadc-426a-E011-8dfc-68b599b31bf5

  Registry warning

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ )

  How to back up and restore the registry in Windows

  Response with the status of the issue to help you further.

  Thank you.

• Blond hair is originally edges of pixel on the green screen, how can I fix?

  So I get really good with my key skills. Unfortunately in this video here (attached screenshot) can't seem to soften or stifle the blond hair and remove these pixelated edges... I searched all over the web only to find tutorials in After Effects... in any case I can fix this without having to use AE?

  

  Hey Danny,

  Here are pictures of our current set up. I'll upload the video soon as well.

  Thanks for the photos!

  I use a T5i DSLR rebel

  AT ISO 400

  100 shutter

  Opening to 5.0

  An SLR digital H.264 shooting is one of the poorest formats for shooting for the composition of the green screen. Sorry to be the bearer of bad news.

  I would recommend shooting with a camera that can record to a highest intra-image 10 bits of quality, like ProRes format. Many people use less expensive DSLR cameras (like yours) and AJA KiPro or Atomos Ninja HDMI data recorders to get this higher quality videos 10bits, ideal for the entry. They are quite affordable for what they do.

  We ensured that the lights are some 45 degrees angles of tripod of our DSLR, then we have the key "light" following the DSLR. With a transom for product photos and unboxing videos.

  You don't necessarily want ceiling for product, which can introduce hard shadows to talent. Key and fill should take care of most of the product lighting. However, a small 300 watt 'kicker' can be called for these lighting products. You want at least a fire behind the talent (called "Backlight"), which is usually directly behind or slightly eccentric talent. Aim the shoulders and the back of the head by focusing light, then it flood a bit. Adjustment of barn doors to avoid any excess of light entering the camera lens. I have this light almost half to 75 percent of the strength of the fill light.

  See this configuration of Jeff Foster:

  

  The subject is about 2 feet away from the backdrop. (We painted the green wall to reduce to a minimum the tripods and wrinkles.

  

  First of all, in my opinion, that this room is far too small for what you want to do.

  Talent of lighting
  It seems that you are more informed in front. Too fill key and not enough. You don't want three lights, try it with two 45 degree angles. Make sure you use the less powerful light for charging. Add broadcast if the lights are of the same power (which resembles what you have). I find this filling works best when he is about 65-70% as much strength as the key.

  Placement of talent vs the green screen
  I prefer to put at least 10 feet between the talent and the green screen (or bottom of any type) so that you can 'cut' any bright talent of the background and I can fly a backlight behind the talent. Remember you want light talent separately from the green screen. For example, if it was a VFX shot, you wish to turn it on dramatically so that it will blend with the background. In a demonstration of product, of course, it is not as important.

  Green screen lighting
  I can understand why you would want to reduce the installation program by painting the green wall, but I think're missing you an important point. The wall must be turned on too! And quite differently on how you would light of talent. If you need more space for this, as well. He needs to be very evenly lit with zero modeling. I like to use very broad and diffuse sources to that effect. A couple of big lights or soft lights work well for this. Use a directional light meter to make sure that you have all the hot points (see the illustration above for the "lights of the screen").

  You may not space or gear to shoot like you want, but I wanted you to know how I would have turned on this shot. You can do a little more research on how you can configure your studio to get better once you get your shot in Premiere Pro.

  Thank you
  Kevin

• How to hide a section of the green screen?

  I use CC first with a green screen. I am, however, making demonstrations a product happens to have some terminal blocks on it which is the same green as the screen. I can hide by sections of the video to ignore the green screen and show the Green terminal blocks?

  Post an image capture.

  But... you can duplicate your film and put it on a video level higher than the original.

  Then apply a mask to the section that you want to protect.  (Its called a matte right there)

  -A layer has a key and the other does not.

• correction of the green screen

  I have a green screen during video playback.  With the help of Adobe page, it is indicated for a right click on the green screen, click settings, click view and disable hardware acceleration.  I tried to do, but on my computer, it does not display panel or displays the icon!  There are 4 other icons, but not one for display!  Help!

  It can vary from one version to the other:

  Disable or enable acceleration GPU effects

  • Choose project > project settings > General.

  • In the section reading and video rendering, select the appropriate rendering engine: the Mercury Playback Engine or Mercury Playback Engine software GPU acceleration only.

    from there:

    Adobe Premiere Pro help. On the effects

• Change the login screen (cloudy) 24 theme to add the logo

  Request Express 4.1.1.00.23
  Internet Explorer - 8
  Oracle Database 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit Production
  24 - cloudy - theme
  
  Hi I was wondering if anyone can help, I use the cloudy 24 theme for my application, I wanted to change the login screen and add the app logo. I downloaded one of the sample applications oracles called 'TREES', in which they have altered the login screen and put a logo on it. Ideally, that's what I would exactly like to my login page to look like but I don't know how to do my scren login look like the login screen 'TREES' and replcae the logo they use with my own.
  
  I have reviewed the themes and patterns of shared components but can't seem to find out how they did it.
  
  Concerning
  Ash

  Hi AshPatel2,

  I don't know how make my scren login look like the login screen 'TREES' and replace the logo they use to mine.

  (1) information to the apex.oracle.com sample container workspace request trees - samples
  workspace: ralab
  user name: test
  password: test
  application: 53647
  url: http://apex.oracle.com/pls/apex/f?p=53647

  (2) If you go on the model of the connection area in the body section you will find the following code

  
    
  
      
      
  
        
      
      
  #TITLE#
    
    
  
      #BODY#
      
        #CLOSE##PREVIOUS##NEXT##DELETE##EDIT##CHANGE##CREATE##CREATE2##EXPAND##COPY##HELP#
      
    
  
  

  (3) in particular, you need to replace this part with your logo div

  If you answer this question, please mark the thread as closed and give points where won...

  Best regards
  Mahmoud

• I changed the my imac with a new drive and I lost the original CD/DVD which came with the new Mac.

  I changed the my imac with a new drive and I lost the original CD/DVD which came with the new Mac.

  and when I go to install the mac lion antiracism apple with reticle logo means error

  what can I do with these

  Please help money

  You can get the replacement system install & Restore CD/DVD of the customer support of Apple - to the United States, (800) 767-2775-for a sum low S & h. you will need to have the model or the serial number of your Mac available.

  If you are not in the United States, you may need to go through the regional Apple Store that serves your location to find the phone number. Here is a list of links to all - http://store.apple.com/Catalog/US/Images/intlstoreroutingpage.html , another resource: International Support Phone #s.

  

• iMac G3 tray charger stuck on the gray screen with question mark flashing folder

  I recently bought an iMac G3 (charger tray, 333 MHz, M4984) and when I try to boot from an OS installation disc 10.3, there will remain only blocked on the gray screen with folder flashing with the question mark. Not only it does not maintain the keys C or Option, but it will not start up any combination of keys, such as resetting the PRAM or the NVRAM. It just starts and stays on the screen with the flashing folder does nothing. It CAN read the keyboard, because I can turn on the computer with the keyboard, it just won't start to the top of any disk or any combination of keys. Any ideas on what could be the problem? I just replaced the hard drive, but it was the same before I replaced the hard drive as well. In addition, the iMac had apparently OS 8.6 installed on it when it came, and I think I need to move to OS 9 and do a firmware update before you install OS X (correct me if I'm wrong), but I can not do because the iMac does start not in general of any combination of keys. Thanks in advance, any help is appreciated.

  I recently bought an iMac G3 (charger tray, 333 MHz, M4984) and when I try to boot from an OS installation disc 10.3, there will remain only blocked on the gray screen with folder flashing with the question mark.

  Valid operation system not found.

  Not only it primer not leave now pressed the C or

  Place the cd in the drive.  power off.  Hold c power key on & while in the startup is underway.
  

  Keys options,

  key option is not supported on tray loading imac g3 333

  In addition, the iMac had apparently OS 8.6 installed on it when it came, and I think I need to move to OS 9 and do a firmware update before you install OS X (correct me if I'm wrong), but I can not do because the iMac does start not in general of any combination of keys. Thanks in advance, any help is appreciated.

  It took charger slot, but I think that optional for the bin.  I think that you can upgrade the firmware with 8.6 for trays.

  You may need to reset the PRAM and NVRAM and Mac's Open Firmware. Stop the Mac, then it turns on and before the screen lights up, quickly down the command, Option, P, and R keys, until the Mac rang twice more after the power to chime.

  Then, before that lights up the screen, hold down the command-Option-O-F until the Open Firmware appears. Then enter these lines, and then press return after each of them:

  Reset-nvram

  Configure default

  Reset-all

  "The reset-all command should restart your Mac. If so, you have successfully reset the Open Firmware settings. »

  http://support.Apple.com/kb/TS1812?viewlocale=en_US

  In the case of the...

  Try taking the battery for 10 minutes.  Put back in the battery.  Fingers crossed. Turn the machine back on.

  How do I eject the cd from the internal drive:

  eject the cd

  List of devices:

  devalias

  List of variables:

  printenv

• I just bought a Logitech Web c110 camera and every time I try to install the installer crashes. Also, I was making the blue screens with different messages on them.

  Original title: how to find missing or corrupt files on windows xp pro

  I just bought a webcam logitech c110 and whenever I try to install the installer breaks down and I was doing the blue screens with different messages on them... How to scan for missing or corrupted files?  My brother-in-law has built this computer for me and I did not all disks for windows xp pro. system that is on it

  Hello

  1. you receive an error message while trying to install the webcam? If so, then post back the exact error message.
  2 are you able to install any other software?

  Try to capture the error message on blue screen and after return the exact error message. This could help us help you better.

  Step 1: Try to install the webcam software in clean boot state and check.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  1. click on start and then click Run.
  2. type msconfig and click OK.
  The System Configuration Utility dialog box appears.
  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
  4. When prompted, click on restart to restart the computer.

  Step 2: Look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Reference:
  Using the event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_event_viewer.mspx?mfr=true

  Understanding of event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/event_overview_01.mspx?mfr=true

  Procedure to view and manage event logs in Event Viewer in Windows XP
  http://support.Microsoft.com/kb/308427

• Virus deleted and now the computer will not start... I get the blue screen with an error that says STOP: 0x0000007B (0xB84C3524, 0xC000000E, 0x00000000, 0x00000000) what is the problem? !!

  Virus deleted and now the computer will not start... I get the blue screen with an error that says STOP: 0x0000007B (0xB84C3524, 0xC000000E, 0x00000000, 0x00000000) what is the problem? !!

  Hi ipitedafoo,

  You can check if this article helps.

  Advanced troubleshooting of errors "Stop 0x0000007B" in Windows XP

  See also:

  Error message "STOP 0x0000007B" when you restart your Windows XP-based computer