Change the INITRANS parameter to the existing blocks

Similar Questions

• How to change the page numbers after adding & save page numbers in the pdf document - need to change the existing page printed on the upper right in the header numbers

  How to change the page numbers after you add and save the page numbers in the pdf document - need to change the existing page printed on the upper right in the header numbers.

  These page numbers were initially created using Acrobat PDF header and footer.

  I have a 750 page pdf document that I've created.

  I have to sometimes the pages up and down after that I added the page numbers in the document by using the Header_Footer tool on the right column of tools.

  But after you save the document, if I get a few pages around, I can't go back and change the page numbers.

  I thought that the page numbers, as indicated in the header and footer must have changed automatically, but I guess that once its print, that it cannot be edited - is that, as what is?

  So I guess we should always first get a copy without numbers of pages before confirming the documents and the creation of an index.

  A way to remove these page numbers already there and add new page numbers.

  Its a lot of work to align 750 court documents and then realize that you must move some and then realize the page numbers cannot be changed and thus begin to do this all over again to compile which can take about 10 hours.

  My question is quite simple, but I hope that overall, I got my point. Sorry if I made it is too complex.

  If no simple way, want to know if anyone has another different tool or a few recommendations to better highlight what I'm doing wrong.

  Thank you for your review and response.

  You should be able to update with tools - Pages - header & foot-

  Update... It not work for you?

  If this isn't the case, then try to remove from this menu and then re - adding them.

  Tuesday, June 23, 2015 23:55, Fortune Mile [email protected]>

• Help - profile change Service models and policies without changing the existing MAC or WWN vNIC and vHBAs

  Hello

  I would like to know if there is a way to preserve existing vNIC MACs and WWN vHBA if I change the model of a Service profile?

  To clarify, our Service profiles have been created since an initial model, and now we'd like as these Service profiles to point to a - model - update to simplify management.

  Initial-template originally provided manually created vNIC and vHBAs and used no LAN or SAN connectivity political, but the new updated model made.

  VNIC names and vHBA names, as well as the MAC and WWN used in connectivity pools policies update-model are the same as those currently used by the Service profiles.

  To rephrase the question:
  Is it possible to change initial-model a Service profile to a template update with essentially the same everything, without changing the UUID currently in use MACs of the profile Service, WWN and perhaps?
  If the answer is that they are not the same when this happens, then someone know of any workaround?

  Thanks for your help!

  RR

  Hi RR

  With respect to the Central of the UCS and sequential allocation:

  https://supportforums.Cisco.com/discussion/12006286/UCS-Central-sequenti...

  http://www.Cisco.com/c/en/us/TD/docs/unified_computing/UCS/release/notes...
  New features in version 1.1(2a)
   
  Allocation of ID sequential for pools, such as addresses MAC, WWN, IP and UUID

  The procedure I would use:

  -Create the update model

  -remove the link 1. Initial model EP

  -delete this 1. SP (this helps to release all the values in the pool)

  -create new MS to model update (it will inherit above pool values)

  -Repeat for all AOCS

  I did this several times without problem (for example, no need to change the zoning of FC). Of course it is disruptive, by blade and SP.

  Don't know if this unbind / bind procedure works without reserves.

  See you soon

  Walter.

• BlackBerry Smartphones Can does not change the signature block on my internet mail from my Pearl

  The signature block on my email says "Sent from my Verizon Wireless Blackberry".  I would like to add my name and email address, but the text is not editable on the Pearl.  Does anyone know how to change this?

  Verizon Wireless Customer Service has been able to explain the problem and solve it.  For those interested here it is:

  BlackBerry Internet Service provides functionality to auto-connect to new users that does not require a user name and password.

  The user must click the settings icon to email on the BB and then click on the link create username.

  Once the username is created, you can go to www.blackberry.com/go/vzw and change the signature options.

• Change the existing title text

  How can I (highlight and) change the text of an existing title? Thanks, George

  Try to reset your current workspace, while the Titler window is not open.

  ALT-SHIFT-0 resets the current workspace. That could bring your tools. You may have accidentally dragged away.

• To change the existing HFR report

  Hi all
  
  I have a requirement to add a column field in an existing report, but I can't find the option to edit the report (presentation of Dimension). In fact, the existing report to the column field contains the period dimension, if I want to add a dimension of the year in the area of the column, how can we change the ratio.
  
  Please suggest.
  
  Kind regards
  Sanjeev
  
  Published by: reachsubbiah on October 6, 2011 03:08

  Hi John,.

  Looks like you already know how to do, but just not could find the dimension diagram? To view the layout of dimension, click on the little button on the upper left corner of your grid. This will highlight all thw grid and her you can see the properties of the grid on the left side of your grill. The layout of dimension is displayed below the properties grid. Click it, and then drag the year columns. This will bring the year less or greater than period. Let me know if you have any questions.

  See you soon,.
  Mehmet

• change the existing text

  Hello.. I don't know if this has been answered before, and if there I'm sorry to ask again... am really new to illustrator and was hoping to find out if it was somehow possible to change the text in an existing .ai file... I had asked someone to create a logo for me using Adobe Illustrator, and he did a great job, but has made a few spelling errors in the text of the logo... How can I change this? Thanks in advance...

  Yes.

• How to change the existing settings of the source for the container system

  Hello
  
  Cannot change settings in the system container (Oracle 11.5.10) source source.
  
  Please guide me how to change the settings.
  
  Thank you and best regards,
  Partha.

  Partha, you should not change the current container. Create a new container by copying the existing container and make any changes required in the present.

• Assignment of a paragraph style to the text that you add to and block of existing text without changing the existing text? Using AppleScript.

  I have and added existing framework of text I want to add more text and at the same time assign a style to text.

  Then add more text to the same text frame later.

  I can do using 'set applied font statements' but what I want to do is to use styles for each entry.  Several times the styles are different for each addition.

  say application "Adobe InDesign CC.

  say history of parent of text block x of the page 1 of document 1

  the value apply fonts of insertion point - 1 for "Chalkduster".

  the value point size of insertion point - 1 to 12

  -character style from the insertion point to - 1 to the 'New' value - does NOT work

  the value content of insertion point - 1 to return & "Either Me!" & back -inserts after

  end say

  
  

  IndesignCC

  iMac OSX 10.9

  AppleScript

  Script debugger 5

  Xcode 5.1
  

  
  

  Thank you

  Mike
  

  -assumes the current paragraph ends with a return

  game of newText for "either Me!" & return

  say application "Adobe InDesign CC.

  say document 1

  the value storyRef to parent history of text frame 1 of page 1

  the value paraStyle to the style of paragraph 'new '.

  the value insertRef to the insertion point -1 of storyRef

  the value of beginIndex to index of insertRef

  say insertRef

  the value content to newText

  end say

  endIndex put to beginIndex + ( of newText length) - 1

  value textRef in (a reference for the characters thru of storyRef endIndex-beginIndex)

  the value applied paragraph style of textRef in paraStyle

  end say

  end say

• How to change the existing terminals 'view as an icon' to view data by program type

  I had a few LabVIEW code inherited from someone else. And there are tons of existing terminals, displayed as an icon. Is it possible to batch process to change all of display them as data type?

  Thank you very much!

  I created a VI that changes all that.

  Run the VI.  Go to any block diagram you want to disable the view as icons setting.  Then click on the button in this VI.

  I also created a version using the right-click framework, but I don't have access to the computer that has this code at this time.

• How to change the existing text of a model?

  Hello everyone, Im new to photoshop and I check a lot of things here and there, just wondering how to edit a text from an existing template? I downloaded a model and Im pressing the tool t then Im clicking the text I want to change but he used to Exchange and only adds a new layer of text? Help!

  You click the box bad you clicked outside the T text icon in the box that opens the layer style dialog.  Try to click the T icon in the text to change layer which is found in the layer in the layers palette.

• How to change the existing ESD?

  Hi all

  We work with a structured customer FM12 files we need to update. Files have been created with Framemaker and everything works fine with the format rules.

  
  

  There is only one problem we have to solve: a title goes on and we need to write it on 2 lines instead of 1 before. But when the last words of the title go to the second line, it is not centered but goes to the left. Is it possible to fix this?

  I tried 'Display Designer' in 'Show element of context', but a message appears and says that I must first select a tag format from the list of 'Rules of Format' selection. I tried with every line that I could find in the rules for Format selection list, but the message keeps appearing.

  Also, I tried to open the EDD to change rules directly into it, but I have no idea on where to find this ESD (which must be a place that I can see the format rules and such that they are applied). Is there a way to find this ESD? Sorry if this sounds like a stupid question, but I'm a newbie to the structured FM.

  Thank you very much for your help and have a nice day!

  Hello

  A DSP lives inside each structured document. Each document has its own copy which is completely independent of any other document. You can export a copy with StructureTools > Export item Catalog as EDD. You can import a DSP with file > import > definitions of element, which completely replaces the current internal ESD.

  It is important to note that the formatting can be controlled by a DSP, the document model, or a combination of both. According to the State of mind of the architect and the size of ESD, it can be difficult to deconstruct.

  Russ

• How to change the existing customization specification?

  I have a few specifications of customization that I created all by deploying the vm model.

  Is it possible to edit this specification with some editor?

  Thank you

  You can change in the specification of customization Manager console. Right-click and select Edit.

  Also, you can import files of responses in xml format to use as customization specification. Never used editors for answers sysprep files MS if Google or someone else need VMTN will tell you all about them.

• Open a jpg file in adobe photoshop.how to change the existing text?

  Help, please

  You can not. A jpeg file is a flat file. The text is part of it.  If it was on a University background, you can erase and replace, but if the background has detail, then not much you can do.

  Gene

• Change the shared user using Java API Service

  Hi Experts,
  
  I have successfully run the example of classes Java from here: http://docs.oracle.com/cd/E17236_01/epm.1112/epm_security_api/frameset.htm?ch01s03.html
  And I need to change the code of UserFunctions.Java.
  
  UserFunctions.Java, I can create, edit, and delete a user.
  But in this sample program, when I want to edit a user, I should create a new user first.
  
  My requirement is I want to change the existing user passing the parameter when you run the program.
  So, when I want to launch the program, it should be like this:
  Java UserFunctions 'method' 'username', 'password', 'email', 'first name', 'last name '.
  
  FYI, I can create a user in passing the parameter as I mentioned above.
  But to edit a user, I still can't do it.
  
  Please find my codes below:
  
  public CSSNativeUserIF createUser (String username, String desc, String firstname, String lastname, String email, String pass) throws CSSException
  {
  The user CSSNativeUserIF = null;
  HashMap context = new HashMap();
  user = cssDMAPI.getNativeUserInstance (context, main);
  user.setLoginName (username);
  user.setDescription (desc);
  user.setFirstName (firstname);
  user.setLastName (lastname);
  user.setEmailAddress (email);
  user.setPassword (pass);
  cssDMAPI.addNativeUser (main user, context);
  
  return the user;
  }
  
  ' public void modifyUser (String username, String desc, String firstname, String lastname, String email, String pass) throws CSSException
  {
  The user CSSNativeUserIF = null;
  HashMap context = new HashMap();
  
  System.out.println ("Edit description user...");
  user = cssDMAPI.getNativeUserInstance (context, main);
  user.setLoginName (username);
  user.setDescription (desc);
  user.setFirstName (firstname);
  user.setLastName (lastname);
  user.setEmailAddress (email);
  user.setPassword (pass);
  cssDMAPI.updateNativeUser (main user, context);
  
  }
  
  -------
  
  in the Sub main():
  
  If (method.equals ("create"))
  {
  / * Create a native user * /.
  cu.printMsg (System.out, "- creating a user-" "");
  user = cu.createUser (username, desc, firstname, lastname, email, pass);
  cu.dumpUsers (System.out, "the user is created successfully," new CSSNativeUserIF [] {user});
  }
  ElseIf (method.equals ("update"))
  {
  / * Change native user * /.
  cu.printMsg (System.out, "- update a user-");
  cu.modifyUser (user name, desc, firstname, lastname, email, pass);
  cu.dumpUsers (System.out, "the user is updated", new CSSNativeUserIF [] {user});
  }
  
  Could you please help me with this?
  
  Thank you and best regards,
  
  Christophe

  Try this

  CSSUserIF [] usrs to = cssAPI.getUsers (context, principal, sLoginName);

  If (usrs.length > 0) {}
  CSSNativeUserIF natUser1 = (CSSNativeUserIF) usrs to [0];
  natUser1.setLoginName (sLoginName);
  natUser1.setFirstName (sFirstName);
  natUser1.setLastName (sLastName);
  natUser1.setEmailAddress (sEmail);
  natUser1.setDescription (sDescription);
  natUser1.setPassword (sPassword);

  cssDMAPI.updateNativeUser (context, principal, natUser1);
  }