change the IP address of the ACS

Similar Questions

• Changes the ACS server registration

  Hello

  I would like to know if someone connects to a router and replaces all parameters, allows GBA save these settings that have been changed.

  regds

  ACS can record all THE commands entered by a user using the technology of the AAA. You can configure the router with AAA - accounting for orders; and the router will send all commands executed by a user when connected snap for GBA.

  http://www.Cisco.com/univercd/CC/TD/doc/product/software/ios121/121cgcr/secur_c/scprt1/scdacct.htm#1001268

  Concerning

  Yusuf

• Are there problems with changing the IP address of a system of v5.3 ACS after the initial Setup?

  I'm migrating from ACS v4.2.1 to v5.3.  I want the final v5.3 system to assume the IP address of the machine 4.2 of origin so I don't have to change any configs on network devices.

  Are there problems with the change of the IP address of the system AFTER the initial installation v5.3?

  I tried without problem. I changed the ip address of the WLC several times.

  You must ensure that:

  1-) you change the switchport accordingly to the appropriate vlan if the new ip address belongs to a subnet of a vlan different.

  2-) make sure that all clients AAA configured to use the new IP address of the ACS servers.

  Here is the procedure how to change the ip address of the interface (according to the doc of cisco):

  http://goo.GL/0BYqVT

  I also changed parIP normal address and it works. but of course, the server must be autonomous before doing this step (i.e. no secondary ACSS registered to him and he is not on the other ACSS in a distributoin).

  HTH

  Amjad

• ACS database does not not after having changed the secondary ip of acs.

  Hello.. Im having 2 ACS 3.1 server. ACS01 (primary) & ACS02 (secondary). We recently moved ACS02 to another site and has changed its ip address.

  When we of database replication from ACS01, we received the error message saying ACS02 has refused the request of replication.

  Any idea what can be the problem?

  Consider these elements when you implement the database replication feature Cisco Secure:

  (1) ACS supports only supported replication of database to other ACS servers. All ACS servers participating in the Cisco Secure database replication must run the same version and patch to FAC level.

  (2) the principal server copy compressed and encrypted the database on the secondary server components. This transmission is done via a connection TCP, Port 2000. The TCP session is authenticated and using an encrypted protocol, Cisco-owners.

  (3) only hosts properly configured, valid ACS can be secondary servers. To add a secondary server, configure it in the AAA servers table in the section of this document Network Configuration. When a server is added to the AAA servers table, the server is displayed for selection as a secondary server in the list of AAA servers as replication partners, on the Cisco Secure database replication page.

  (4) the principal server must be configured as an AAA server and must have a key. The secondary server must have a primary server configured as an AAA server and its key for the primary server must match the key primary servers.

  (5) secondary servers replication takes place sequentially in the order listed in the replication list under replication partners, on the Cisco Secure database replication page. (6) the secondary server that receives the replicated components must be configured to accept replication of database from the primary server. To configure a secondary server for database replication, refer to configuring a secondary Cisco Secure ACS Server of this document section.

  (7) ACS does not support two-way replication of database. The secondary server, which receives the replicated components, check that the primary server is not on its list of replication. If this is not the case, the secondary server accepts replicated components. If so, it rejects the components.

  (8) to replicate the seller of RADIUS defined by the user and the configurations of the specific attribute (VSA) provider successfully, definitions have to be replicated must be identical on the primary and secondary servers. This includes seller RADIUS slots occupy sellers RADIUS defined by the user. For more information on the sellers of the RADIUS and the VSA attributes defined by the user, see section User-Defined RADIUS vendors and VSA sets the document Cisco Secure ACS database command-line Utility.

• Change IP of a device of the ACS

  What will break if I change the IP address of the device TO 4.2? I need a few of them to assume the IP addresses of our existing production boxes. Apart from the re-manual setting the IP SE through the console, reconfigure the AAA/replication server and the ACS Agent Config provider IPs, is there something that is "lost" permanentnly broken when you reset the IP address?

  Thank you!

  Yes, dynamic mapping is created when the user connects, but this will be a default mapping. All users will be mapped to the default group.

  Incase you have permission set up on the basis of the group, it will not run.

  If you have all the users that are not mapped to the default group, then no need to worry.

  Kind regards

  ~ JG

  Note the useful messages

• Is there a way to change the management IP in the graphical interface of ACS

  Hello

  I'm changing the IP management 5.2 ACS in the GUI, but could not find it.

  Is it possible to change the IP address in the ACS GUI?

  Thank you

  -Alejin

  Hello Alejin,

  You can't change the IP address in the GUI. GBA is an application that move on a device. You must change the IP address to the device level, ssh to your device and connection.

  then configure terminal

  0 gigabit interface

  IP [ip address] [your netmask]

  output

  output

  write memory

  concerning

  Alex

• will I lose my everything in the app store pushase if I change my email address of my apple ID

  will I lose my everything in the app store pushase if I change my email address of my apple ID

  It is a forum for application Apple, compressor.

  https://www.Apple.com/support/Mac/app-store/

• I changed my email address of my ID Apple online, but my iphone still ask again me for my old email password, which no longer exists, how can I change the email to my new on my iPhone

  I changed my email address of my ID Apple online, but my iphone still ask again me for my old email password, which no longer exists, how can I change the email to my new on my iPhone

  Go to settings | Mail, Contacts, calendars and change e-mail account information.

  T.

• Why can't change my email address in the profile change for communities?

  Why can't change my email address in the profile change for communities? I won't be able to get the email with the former in the future.

  Because the e-mail address is connected to your Apple ID, which is used to connect to the CSA. You must change the Apple ID.

• Change the e-mail address associated with my iCloud

  All my stuff is backed up on my iCloud under [email protected], but I need the update [email protected] as I'm leaving olddomain.com and will not have access to this much longer email.  Is it possible to just change the email to a new gmail address so it is associated with is more than my former employer?

  Email address Apple ID

  https://support.Apple.com/en-us/HT201356

• Address field is red - a color that is difficult for me to see. Is it possible to use the configuration editor to change the color.

  Apparently a bug in Thunderbird is changing the "To" address to the Red even if the recipient is in my address book. The address is displayed when I start typing the first few letters of the recipient, but the text turns red which is difficult for me to see. I want to continue to enter addresses that I always (first letter type or two) would be the simplest solution to change the color from red to something easier for me to read. I looked in the configuration editor but can't seem to find a key that is appropriate for the address field. Can anyone provide assistance?

  Update to Thunderbird 38.0.1.

• When I imported e-mail addresses into TB, they landed in the nickname column and I can't manually change the addresses of 1000!

  Is there a way I can change the nickname column to e-mail addresses? If I try to import the address book again (I on a different flash drive), I'm afraid I'll have 2 copies and it's going to go even more complicated.

  Remove any address book and do the import again, but this time align the data with the correct address book fields.

• Changing the IP address

  I recently bought a new iMac, gave my old to my son, it's always on the same network. I downloaded all my data from the old to the new via Time Machine. Should I change IP address on a new or old?

  No, change the IP address is not required on computers.

• Change the e-mail address of the administrator

  How to change the email associated with the Admin account? When setting up my Macbook Pro, I used my email address for my account of mac, but I have since cancelled this e-mail account and changed the info successfully for my apple ID. My log information on my Macbook still has the old email and I can't change it. I unlocked the small lock icon in users and groups and do a right-click of the user to display the advanced options. I deleted the old apple ID and added that with the new email address, but the user icon still shows the old enamel. I have Google searched this subject but can't seem to find an answer, so any help would be appreciated. Thank you.

  What is displayed in the system preferences/Internet accounts?

• You cannot change the E-mail address associated with Apple ID

  I followed all the instructions to change the e-mail address associated with my Apple ID, including the signature of all THE browsers and devices that have previously been signed to my Apple accounts (icloud, itunes, etc.).  I also deleted my ID apple from my iPhone / iPad. The Apple ID page 'manage' I select "edit", "Change my e-mail address", and then I type in my new address, select 'continue' and screen dial just keeps turning and gets stuck.  I tried to use a new address "icloud.com", but that did not work.  Then I tried to use a new address "outlook.com", and that did not work; the dial at the same screen keeps turning but going nowhere.  Very frustrating.  Anyone have any idea why this is happening?

  I'm not sure what you are trying to do but you can not change the address to iCloud and you are never offered any opportunity to do so.