Change IP of a device of the ACS

Similar Questions

• I can't change "sounds and audio devices" in the Panel

  original title: I can't change "sounds and audio devices" in the control panel after the update my card NVIDIA vidio driver and Microsoft DirectX in my Windows XP SP3 update.  How can I fix it?

  I recently updated my card (NVIDIA GeForce 6800 GT) video driver and Microsoft DirectX after you have experienced a problem with a casual game.  That fixed the problem, but then I noticed that my sound 'e-mail notification' had failed in its original supplied with Windows.  I changed "Sounds and Audio devices", registered, registered as a new regime, etc., and still plays the old default Windows sound.  It was the only noise I had on Windows.  When I check "Sounds and Audio devices", the sound, I have chosen is the one listed, and it does not play when I check, but when the mail arrives, I hear the old Windows by default.  I don't know if the updates, to happen or not, caused only that it took place at the same time.  Thanks for any help you can give.

  Thank you for your suggestions.  It turns out that my e-mail client, "Eudora", had somehow reset the default mode in the Windows sounds.  I forgot that there is a choice to "Be careful" in Eudora Tools.  After I changed it back, it worked perfectly.  Once again, thank you to answer me.

• Windows ACS 4.2.0 back up the database on the device of 1120 acs 4.2.1.15

  Hi all

  I am running windows based acs 3.3 in my lan environment class must be replaced by acs 1120 running acs 4.2.1.15, ACS 3.3 database was built up to 4.2.0.124, step by step through the process of upgrading

  (1) acs 3.3.3.14---> 4.1.1.24

  (2) acs 4.1.1.24---> 4.2.0.124.

  now, my database is with 4.2.0.124 dmp file, I can not move my database to 4.2.1.15 because 4.2.1.15 patch is not applicable & executable on package evalution 90 days of 4.2.0.124 for the windows platform.

  can I import my windows based 4.2.0.124 datbase directly to my acs performer 4.2.1.15.3 device? another sound requires any action to change the database corresponding to the device windows version after windows-based.

  I could see on the device under the restoration of the following parameters (restore 4.2.0 suggest on this backup file to GBA 4.2.1), kindly

  .

  Hello Shema

  One thing you can try.

  [1] rollback patch-3 of the GBA unit. It must be done in CLI/console to acs is. This will bring you acs is ver 4.2.1 version 15.

  [2] restore the database from version 4.2.0 on ver 4.2.1 directly. You must activate a check box for restoration. [see the attachment, restore the section]

  [3] then apply the Patch 3 on GBA, after a successful restore.

  Try the following steps.

  Thank you

  Nelson

  PS - Please note useful messages.

• Change the default audio device and the recognition of the application

  I'm new to Vista (home premium w/sp2) and I am confused by works the assignment of default device (control_panel-> sounds), specifically the device change with existing applications (running).

  I change frequently between the speakers and the headphones - however, the change of output device is not recognized by running applications, such as iTunes or Firefox and will not be recognized until I have completely quit and restart the application.

  Why?  It is extremely annoying and incoherent other well educated such as Mac OS X platforms.  I would just like to change the default audio output device, on the fly, without the need to restart applications.

  I do something wrong or Vista offers this functionality to the end user?

  Thank you!

  Hello Wyntr,

  Thank you for using the Microsoft answers Forum.

  Currently, the function of switching between audio output devices is carried out manually. To make the selection, you can click the sound icon in the taskbar, then click the button at the bottom of the volume control Mixer. In the properties of the volume, you can click on devices in the upper left corner and select the appropriate device to make it the default for applications open from then on.

  Let us know if this can help, or if you have additional questions on this subject.

  Judd
  Engineer Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Possibility to get a theme of device when the theme of the app has changed?

  I wonder if anyone knows if it is possible to determine the color theme of the device when your application has been his theme changed. Normally, you can determine the color theme of the device like this:

  bb::cascades::VisualStyle::Type theme = Application::instance()->themeSupport()->theme()->colorTheme()->style();
  

  .. But if the application has had his overloaded theme in the file of the bar - descriptor.xml or environment variables (or by code on OS 10.3 +), then the example above returns the overloaded theme, not the unit one. I want to be able to determine is the theme of a real device, even if the application has overloaded it. Does anyone know a way to do this?

  This would match the theme used by the user in the application right now, what he wants is the default theme for the phone.

  You have 2 choices:
  (1) file "" / services/pps/deviceproperties ' has a key named 'defaultTheme' which will point to 'black' or 'white'. "
  (2) make your own function that manually associate HardwareInfo::modelName() with the theme appropriate, somewhat like the following code example that manually associate the name of the model with a value in case you want to use du() in 10.2 project.

  https://github.com/RodgerLeblanc/AssetSelector/BLOB/master/src/DesignUnits/DesignUnits.cpp

  I thought that I myself remembered a function called someClassName::isAmoled (), but never found when Googling it, so I just thought that there was...

• 3.3 of the ACS, changed the password of domain and ACS beat

  I do not set up the GANYMEDE. I want to disable the AD administrator account, but it seems to require ACS.

  I changed the admin PW and GANYMEDE stop. ACS windows services all begin to use the administrator account. If I change to use a different domain administrator account, they start, but disabling administrator again breaks GANYMEDE.

  Ideas?

  Thank you

  I'm not sure your point.

  Yet once, your windows services ACS are led by administrator Windows AD account. ACS will use this account to connect to AD for authentication of the user. If you disable the window AD admin account or change its password, ACS could not access AD to authenticate the user. This is probably the reason that GANYMEDE authentication failed after you changed windows AD admin account. In configuration of the ACS external DB user, you should see the windows of the AD.

• Configure the ACS 5.1 device to connect to the AD

  Pls advise.

  This is a new installation. I had to configure the ACS to connect to the ad to authenticate users and retrieve user information for the group as a result of step mapping.

  Go to the users and identity stores > external identity stores > Active Directory and enter the domain name

  appoint and give a name of user and password which will allow to connect to the domain. Then, click Test connection to validate join them the domain.

  I got successful connection test. But when I click on save changes. I got error.

  How has the problem been resolved?

  

  Best regards

  Boonkiat

  It can be many things.

  DCs how do you have in your area? They are all accessible by the ACS?

  You return the SRV records for your ad?

• change the IP address of the ACS

  Hello guys,.

  I will be soon changed the IP address of my ACS server because I will move it to a new VIRTUAL LAN. the ACS is also integrated with Microsoft Active Directory users for authentication to the wireless lan users.

  My main concern is that if I change the IP address of the ACS, I have to do something on the Active Directory Server? I have to all certificate related issues? GBA I am running is version 5-1-0-44-6.

  all opinions are very welcome and appreciated.

  Hello

  change the IP will not affect the certificate of the ACS, or join the domain,
  in the worst scenarios, where you face the problem of having to return to the field "can be secondary domain question or problem to clock" you can simply remove the entry of the machine on the side of the field and re - join the domain "I hope that you won't have to do", but even if you need it won't take more than a few minutes.

  see you soon,

  Mohammad,

• Two monitors - I can't change "use this device as the primary monitor" because both are grayed.

  I just put my laptop (1) and (2) monitor to use together.  I like being a primary monitor (2) would monitor the "use this device as the primary monitor' however are grayed out.  I tried several things but cannot get to work.  Any suggestions? I am on Windows 7

  Hello, Olivia,.

  It depends on how you have the monitor Setup.

  You can get this option only when you select extend monitor instead of select two copies.

  If you want to set primary and secondary monitors, you must select the Extend monitors.

  For more information, see the article:

  Move windows between multiple monitors

  Setting up dual monitor: two screens are better than one

  Hope the helps of information.

• Machine based authentication using EAP - TLS, MS CA and 5.2 of the ACS

  I use ACS 4.2 for Windows for a couple of years now and I'm pretty comfortable with it.  5.2 model is much more different than what I expected.  We downloaded the trial in our laboratory for 90 days, and I try to get 802. 1 x wired works so we can be sure that we want to buy it.  I've looked everywhere and I have been unable to find some basic instructions on how to configure the following in a step by step process scenario:

  1. integrated AD

  2 EAP - TLS

  3 certificates

  4 Microsoft CA

  5. the applicant is XP SP 3

  6 non-Cisco 802.1 x compatible switches (switches are not the question)

  I got GANYMEDE to work fairly easily, but I am confident the issues I have are user based :).  Does anyone know of a doc somewhere that goes on a scenario like this (in addition to the user manual and docs of migration ISBN)?  Also, we have the assurance of software on our box 4.2 - TAC support questions we have on the 5.2 box while we are it do demonstrations?

  Thanks in advance.

  Hello, Christopher.

  I'll try to give you some tips to achieve what you want.

  Additional info can be found in the user guide:

  http://www.Cisco.com/en/us/docs/net_mgmt/cisco_secure_access_control_system/5.2/user/guide/acsuserguide.html

  1. in the identity store / Active directory, check "enable machine authentication.

  2 import a certificate for ACS

  Go to System Administration > Configuration > Local Server Certificates > Local certificates and click the Add button.

  Select how you want to import the certificate, and then verify the Protocol EAP

  3. Add your switches as aaa clients

  Access network resources > network hardware and the AAA Clients, click on create and add configure address IP + shared secret for the RADIUS.

  4-go to access policies > Access Services and click on create a new access service.

  Select the selected Type of Service and network access in the list.

  Verify the identity, group mapping and authorization

  5 - go to the access policies > rules of selection and select "Rule based selection result" if not already done, then click Customize at the bottom right of the screen, and then add the properties that allows you to match your device with which you want to do TLS.

  You can use the IP address of devices, or you can create a NDG (in network resources), assign devices to the NDG and match this NDG in your rule.

  If all your switches RADIUS will make eap - tls, you can change the rule

  Rule-1

  Ray game

  Default network access

  While in the result, you choose your service of access created in step 3.

  6 - go to the access policies and click on the access service that you created in step 3. In the allowed Protocols tab, see EAP - TLS

  7. unfold your access service menu, and then click identity. Select your ad as being the source of the identity

  8. check that the 'Allowed access' rule is selected in the authorization to access your service

  These measures define your devices, and then create a rule to say that ACS must use an individual service for this access devices and set this access service to use AD as authentication.

  Again, what are the basic steps, he may miss some things to do depending on your configuration, but I hope this will help you.

  ACS 5 may be difficult at first, but once you get your hands on it, you will see that it is powerful.

• Windows domain account to view reports / manage the ACS server.

  All,

  We have a Cisco ACS 5.2 deployment (device).  It has existing integration with Active Directory.  We use it with RADIUS to authenticate our users wireless and GANYMEDE to manage our network equipment.

  RAY reports are useful for other teams (except my own) in order to resolve account lockouts and password (everyone forgets to change the password on his phone).

  I would like to allow this team and other access to the report of RADIUS authentications.

  I want them to be able to use their domain account to do this.<-------  this="" is="" mandatory,="" based="" on="" our="" security="">

  We tried using an account local and which works very well.

  My system tells me that domain accounts cannot access the administrative parts of ACS.

  Is this true?

  We have the support to allow us to upgrade to the latest version of the ACS.

  5.4 of the ACS, it is possible to authenticate and authorize the directors of external stores, including AD accounts

• Definition of access a single device, from the Group of GANYMEDE

  Hello

  Here's my situation: I have a Lantronix device and two groups of users who need access using Ganymede (ACS 5.6).  I don't want to put all the users in a group because many of the users would then receive access to other restricted devices.

  Basically, I need to combine peripheral access 1 - 10 but Group B only able to access devices 1.

  I've been reviewing the authorization policies, but I'm not clear exactly where to go.  Any help would be grateful.

  Thank you.

  Daniel

  daniel.m.williams1,

  I don't know how the ACS 5.6 Menus have changed compared to 5.4 ACS (us still have but began to abandon to ISE 2.0 for GANYMEDE). But I'll throw my idea anyway and hopefully give you some progress. I'm not familiar with the Lantronix devices but they are configurable with GANYMEDE?

  Here's how I'm going to try to solve this problem in ACS 5.4. Make sure that you also have approriate profile of Shell and the sets of commands in the authorization below rules.

  1. users and identity stores > identity groups > create Group A and B > save.

  2. users and identity stores > internal identity stores > users > create users > when creating users, assign them to their respective membership in step 1 group (Group A and B) > save.

  3. users and identity stores > identity store sequences > create identity store = Local for example > in additional recovery search attribute list, select users > save.

  4 policy elements > Session Conditions > network Conditions > device filters > filter device create Group A = > tab select an IP address then check mark peripheral IP > add the ip address of the devices > filter device create Group B = > tab select an IP address then check device IP > add the ip address of the devices > Submit.

  5. political access > Access Services > create Access Service > identity = Local to step 3 > authorization > customize > add filter device and group identity > click OK > create an authorization rule 1 > select device filter = Group A > select a group identity identity of Group A in step 1 > click OK > create an authorization rule 2 > select device filter = Group B > select a group identity identity of Group B in step 1 > click OK

  HTH

  Please note and mark the correct comment if you find it useful. Thank you *.

• "Another device on the network use my ip address".

  I tried to check my mail and could not and got this message "another device on the network use the IP address of your computer." I have never seen it before. He also said that I could change the IP address, if I continued to have problems. I bought this iMac and used Migration to transfer all the stuff from my old iMac that is still used. That was months ago, but I never had this message up to now. So should I change one of the IP addresses? And if so, how is that done?

  http://osxdaily.com/2010/09/19/another-device-on-the-network-is-using-your-Compu ters-ip-address.

• My new iPhone shows up under devices in the sidebar of iTunes, but I can't find the summary screen

  I googled several fixes, but none of them work.  My phone appears under devices, but no summary screen.  I just had on the phone yesterday and he restored the old phone.  I want to be able to select certain playlist to have this phone, etc..  Summary screen was easy to show everything I needed to know or change.  How to display summary screen?

  Yes, I made sure I have the latest version of iTunes.  Yes, it is connected via the port usb and visible in the devices.  No, when I right click on the device it shows a summary option, just eject, restore, sync etc.

  See the boxed area in my screenshot:

  

  That's what you click on, not on the name of the device in the sidebar.

• That means "another device on the network use the IP address of your computer"?, that means "another device on the network is using the IP address of your computer?

  That means "another device on the network use the IP address of your computer"?, that means "another device on the network is using the IP address of your computer?

  A

  Most likely, the computer becomes a network address of a router. The assignment of an address ("lease") expires and must be renewed after a certain period of time, which could be an hour or a day. The lease expired without being renewed because the device has been disconnected at the time. Meanwhile, the address has been leased to another device on the network, or maybe the router has not updated its list of addresses the leases. When the device offline comes back online, a conflict results. Depending on the type of router you have, the conflict can resolve itself automatically. If not, then in the menu bar, select please

  ▹ System Preferences network ▹ 

  If the preferences window is locked, click the lock icon in the lower left corner and enter your password to unlock it. Click the Advanced button, and then select the TCP/IP tab in the sheet that drops down. Look at the menu option

  Configure IPv4

  If the selection in this menu is

  Using DHCP

  Click on the button

  Renew the DHCP lease

  Test.

  Make sure that you have more than one DHCP server on the network. That could happen if you have more than one access point Wi - Fi, or if you have a router and broadband a wide device distinct in connection mode sharing.

  B

  Less likely, you have a network address that you assigned yourself and another device is itself by assigning the same address. In this case, the selection to configure IPv4 menu will be either manually or using DHCP with manual address. This kind of conflict will not be resolved automatically. You have the following options to solve:

  1. Change the selection in menu using DHCP.
  2. Change the address assigned manually to one that is not used by another device.
  3. Change the address of the other device.

  Which of these options you choose depends on the details of why you use a static IP address. Any changes you make to the network settings is necessary before taking effect. To do this, click OK, and then click apply.

  If the router is also your device at wide band, then he may be operating in bridged mode. In this case, only one customer at a time will be able to connect to the Internet. Consult the manufacturer or ISP documentation for how to reconfigure the device in the connection mode sharing.

  C

  According to a report a "DirectTV" receiver can cause the problem. If necessary, disconnect the device from the network, or power off and test. Consult the support services provider.