change the original size of external swf in the main sequence

Similar Questions

• I hope someone can help me. I changed a few settings in the BIOS Setup, and now I have just a black screen. I changed the main boot to the DVD player device. is it possible to reset to original settings?

  I hope someone can help me. I changed a few settings in the BIOS Setup, and now I have just a black screen. I changed the main boot to the DVD player device.  is it possible to reset to original settings?
  I am running Windows XP

  clint341,
  Thanks for posting on the Microsoft Answers forum.  We cannot guide you more precisely by changing the BIOS settings that the BIOS settings are specific to your motherboard.  However, most (if not all) parameters of the BIOS have an option to restore the default BIOS (sometimes called "default opitimized").  It may be an option in the menu that you highlight, then press enter or it can be assigned to an F key and States at the bottom of the screen, press F? for the default settings.  I hope this helps.  If you are still not able to reset, check with the manufacturer of PC for more information about the BIOS. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Compaq presario cq61: change the boot sequence

  I have 10 Windows upgrade on my compaq Presario cq61 free. I want to do a clean install of Windows 10. I downloaded the tool of Microsoft Media, made a key USB and DVD containing the clean install. I am told that the use of the flash player, I have to change the boot sequence in the bios. I tried everything from ESC, all numbers F and LED to try to enter the bios and all have failed. Told me that all I had to do with the DVD was just put it in and start the computer and the laptop would boot from the DVD and I could make my own installation from there. Which also failed. The only thing I have not tried is downgrade to Windows 7, affecting Windows 7 back to factory settings, then reinstall the free update of Windows 10. I would not have to go through all if I mostly because I bought the laptop from a friend and it was installed at the factory of Windows 7 and I don't got no disc software to the computer so I don't want to screw up and drop windows 7 without the appropriate software reinstall to match the product key.

  Any help to enter in the bios or advice that could help me reach my goal would be greatly appreciated.

  Hello

  Here are some other suggestions.

  1. start the machine in Windows 10.

  Open settings and select System.  Select food and sleep, and then click additional power settings - in the next window, click on "Choose what the power button" in the left pane.

  In the next window, click on "Change settings that are currently unavailable" (close), then Remove the check mark from the box against 'Turn on a quick start (recommended) '.  Click on the button Save the settings, and then close any open windows and stop the laptop by right clicking on the icon from the Start Menu, then select prompt (Admin) and click 'Yes' to the uac prompt.

  Type (or copy and paste) the following command (including spaces) and click Enter.

  Shutdown /s /t 0

  Tap on the ESC key as soon as you turn it on and see if it will now access the Start Menu.

  2 try to connect a keyboard external usb and see if this will allow you to access the Start Menu.

  Kind regards

  DP - K

• I accidentally change the main drive d LABEL: volume 1 label D: (C :) AND IT does not FIND C:\Windows\system32\rstui.exe. How can I find this path?

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages - Windows cannot find C:\Windows\system32\rstui.exe «»
  • Recent changes made to your computer: I accidentally change the main drive d LABEL: volume 1 label D: (C :) AND IT does not FIND C:\Windows\system32\rstui.exe. How can I find this path?
  • What you have already tried to fix a volume control simple back - I tried things like this before as to cause major problems. I'll do it right the first time.

  Read this tutorial carefully. Hpoefully it resolve issue you. I have no knowledge on this topic. Only offer you a tutorial of a VERY worthy site.

  How to add, change, or remove a drive letter in Vista

  http://www.Vistax64.com/tutorials/114767-drive-letter-add-change-remove.html

  t-4-2

  PS Sorry for the huge impression. A small bug in copy/paste.

• CHANGE THE MAIN ADMIN ACCOUNT: WINDOWS 7

  Hi all

  I want to change the main admin account on Windows 7, so I can remove the second account admin on my machine.

  I put my machine using my admin account but had a problem with and an Adobe program. Adobe technology has created a second admin account, account now appears to be set as primary and I can not change the options for the account, much less delete it but I would like to make.

  Can someone tell me if there is a solution to this?

  See below:

  1. This is my main account, and he's always been. I click on 'manage another account '.

  

  2. He takes me to the screen. I click on "Administrator". Administrator. "

  

  3. no options to change the account are available. This is the account that Adobe technology created AFTER the story of 'Kevin Byers' had been used as my main admin account.

  

  The strange thing is that these options ARE available on my main account. The FIRST account created on this machine.

  PLEASE NOTE: THIS IS THE ACCOUNT I USED TO LOG IN.

  

  So I guess the question is: why was the SECOND admin account changed to primary school, why can't change this back, and why I can delete the account I'm logged in from this account?

  I've been racking my brain and no one I know can help. Searches provide nothing, so if you have anything it would be appreciated.

  Hi all

  I want to change the main admin account on Windows 7, so I can remove the second account admin on my machine.

  So I guess the question is: why was the SECOND admin account changed to primary school, why can't change this back, and why I can delete the account I'm logged in from this account?

  I've been racking my brain and no one I know can help. Searches provide nothing, so if you have anything it would be appreciated.

  Your problem is mainly due to some confusion.

  There is no 'primary' admin account in Windows 7. There are '' integrated '' account called "Administrator". It's still there. You can't create, edit or delete. Adobe technology has not created the it. He simply allowed her.

  You can disable the built-in Administrator account by using the sequence of steps shown below. Before you do, you should create, test, and document an alternative admin account. Why? It's for the same reason that you have a spare key to your House. A lot of people have in diabolical trouble in case something goes wrong with their one and only the account Admin happens all the time. With spare admin account, you are safe.

  1. Log in under your own admin account.
  2. Click the start planet.
  3. Type these letters: cmd.exe
  4. Press Ctrl + Shift + Enter.
  5. Accept the challenge.
  6. Enter the following command and press ENTER:
     NET user administrator / active: No.

• Change the boot sequence

  Hi all

  I was wondering if anyone has a guide step by step (with pictures) on how to change the boot sequence (I'm not interested by a particular brand of PC or a particular Windows).

  Thanks in advance :)

  Adam

  There are a few different ways to access a page of options boot menu at startup

  Bios legacy would use the delete key

  UEFI BIOS would use F8

  Each you could enter the bios and select the or change the first device to boot cd / dvd drive is usually first "inline"

  Some uefi bios and or install uefi, you may enter win - 10 or 8 - 8.1 and turn off the quick start first in = power options change what the button of power before you could even get into the bios because of the characteristics of secure of the two of them start.

• How can I change the main language of a laptop with windows 7 from Spanish to English

  How can I change the main language of a laptop with windows 7 from Spanish to English

  What version of W7 do you run? Ultimate?

  See - http://answers.microsoft.com/en-us/windows/forum/windows_7-desktop/how-to-change-system-language-of-windows-7-home/d58fb37b-cb02-41c8-986f-22582fd35a12 and http://windows.microsoft.com/en-gb/windows7/install-or-change-a-display-language for the detailed information.

• Inserting changes into an intermediate table rather than change the main table on a form.

  
  I am trying to create a process inserts changes the date in an intermediate table for approval, rather than change the main table.  I am currently using 4.2.4. Here's how I went on this subject.

  1. I've created a report interactive and connected the primary key on a form that displays data.
  2. Then I created a button called to request changes that redirects to another page with a form and through the necessary elements of session state.  (Note: I voluntarily created 2 different forms)
  3. I then set the initial values of the elements of the page on the current page based on the page, I went through the session state.

  My problem is that when changes are made and I hit the submit button, which is to send the page using an SQL Update statement, it does not have the intermediate table with new data.  I think it's because I set the source for the page elements as part of the page the previous page, thereby breaking the link to the database columns in my staging table.  Someone knows how to set the items on the form of page items I placed in another page without breaking the link to the database column?  Or is there an other/easier way to do this?

  Change that you attend the process instead of using APEX built DML, to call a specially written block that will take the page objects values and save them to your intermediate table...

  Thank you

  Tony Miller
  Software LuvMuffin
  Salt Lake City, UT

• How to change the main administrator in my CC team?

  How to change the main administrator in my CC team?

  Hello

  I'm afraid that the admin can be modified to your order at the time, but you can add more than one administrator console. You can also consider to reorganize with the correct email address.

  To add multiple administrators, see help here - manage your cloud creative teams membership

  ^ Ani

• How to change the main administrator

  How can I change primary administrator?

  Hi Steve,.

  I checked your account details.

  Unfortunately you cannot change the main admin on the teams.

  You can follow the instructions given by Pattie in the post above to add a secondary admin on CC teams, but the billing options remain confined to the main admin only email.

  Kind regards

  Sheena

• Change the main administrator of a teams CC account - Licens is purchased through resellers!

  Hello

  According to the guide, if the license is purchased through resellers we have the right to contact Adobe support for help to change the main administrator. Who can help me with this? I have a VIP number for the purchased license.

  Kind regards

  Erik

  Hi Erik,

  Would you suggest to contact customer service and choose the option which best describe your problem and then click always need help! Contact us.

  Concerning

  ~ David

• Cannot change the boot sequence in the bios

  Hello world!

  I use vmware fusion 3.1.1 (282344) (in fact has happened since I started from 3.0). A home edition of Windows XP is installed in the bootcamp partition and is used as the guest operating system. When I start Windows XP, it always first try to boot from the network, which takes about 1 min (this can be ignored by hitting the ESC key however). Even if I enter the bios settings, the starting sequences is not editable, where "everything on this menu is not editable in user mode. If all items require changes, consult your supervisor system"is written. However, no password supervisor and of course, I'm not using the 'user '. Does anyone have any ideas on this?

  PS: a full Linux guest OS (installed in fusion and is wrapped up as a file) has no problem to change the boot sequence.

  Best regards

  PrestonXu

  All items of this menu cannot be changed in user mode. If all items require changes, consult your supervisor system

  Weird, I never heard of this message before. You get this when you start merging, not in native mode? I would have asked if someone had made changes to the BIOS settings until you got to the virtual machine, except that you said it's Boot Camp, so I think it's less likely.

  You can try to change the boot order in the Virtual Machine > settings > advanced > boot device.

• Add Label (and other things like SequenceCall, statement etc.) on the main sequence?

  Hi all

  I try to add the label on the main sequence, but the problem is how to run there. Have been made successfully subsequences and their content, but I now want to add content in the main sequence (labels, SequenceCall, statement etc.). You can someone help me with this code? (CVI/LabWidows). This code seeks to add labels (szName) on the main sequence.

  Before entering the Label, have referred to the hand in the file in the sequence. The missing part.

  tsErrChkMsgPopup (TS_EngineGetSeqFileEx (EngineHandle, & errorInfo, SeqTemplate_path,  TS_GetSeqFile_DoNotRunLoadCallback, TS_ConflictHandler_Prompt, & SequenceFileHandle));
  
            tsErrChkMsgPopup (TS_EngineNewStep (EngineHandle, & errorInfo, '',' Label', & labelStep));
  
  							tsErrChkMsgPopup (TS_StepSetName (labelStep, & errorInfo, szName));
  
  							error = TS_SequenceInsertStep (SequenceFileHandle, & errorInfo, labelStep, indexL, TS_StepGroup_Main);

  I tried with TS_SeqContextGetMain(), but does not work.

  Best regards

  branar

  Hi Ray,

  reason why is used SecuenceFileHandle was I have change the existing file (only not by creating a new). Simply, add subsequences of default file and save as a different name. Problem is now solved by

  TS_SeqFileGetSequenceByName (SequenceFileHandle, NULL, 'MainSequence', & SequenceHandle)

  I get "MainSequence" and adding animals here. Previously, MainSequence has been created and two sequences with the same name were existi.

  Best regards

  branara

• Checking the status of the main sequence in reminder PostUUT

  I'm checking the State of the main sequence in the PostUUT callback, running TS 2014 SP1.
  Say, the main sequence generates an error. PostUUT I check and get the following

  Parameters.Result.Status "error".
  Parameters.Result.Error.Code

  Parameters.Result.Error.Msg

  Parameters.Result.Error.Occurred False

  Parameters.Result.Error.Occurred should not be set to True? If this isn't the case, please explain why.

  Thank you.

  In the process model of the step that calls the MainSequence reminder is set to ignore errors.  It is for the rest of your group of main step can run.  That is why we only sets result false but retains all the error information.

  If it were me, I would trigger on the State channel.

  Hope this helps,

• Go to the list of the results of the main sequence in my plugin...

  Hi guys,.

  OK, first post here, but I'm a little stuck. I am writing a plugin model to generate a custom HTML report (my requirement has a very specific layout for the report, which is not at all compatible with the html reports generated by teststand normally). Anyway. I generated all labview code, I want to make the report in the format I need, but I'm really bad at actually get information of teststand in a way that is easier.

  What I want to do is browse through the list of the results of the main sequence in the callback sequence DUT-Done of the sequence of pluging, which is stored in

  Parameters.MainSequenceResult.TS.SequenceCall.ResultList according to the documentation, but how can I really access it as a table I can go? All I have in my list of parameter is a reference to the parameters. MainSequenceResult, and for the life of me I can't work out what to call this knowledge actually just get it into a format that I can then use to browse in a loop "foreach" to get out of these settings.

  I'm on a windows machine and teststand 2014 7.

  Any help you could give would be really appreciated!

  J

  The list of top level result is: Parameters.MainSequenceResult.TS.SequenceCall.ResultList

  To find it, I dragged Parameters.MainSequenceResult in the Watch window to a breakpoint and developed it until I found the list of results.

  The ResultList is a PropertyObject which is an array of containers, so as the methods GetPropertyObjectByOffset and GetNumElements are going to work on that.