Change the port of the who

Similar Questions

• change the vswitch, best practical question

  Hello

  Here is the scenario, I invited XP and I want to spend the vswitch he connected too.

  Is it safe to simply change the properties of comments in the vshpere client, set up the different vswitch, select ok. (without closing comments)

  Here is what happened last week and I would like to get feedback to see if I did something outside best practices.

  I have a xp machine who's job it is to move files within our company.  In house app, had problems with the performance, of course the bandwidth network has been a problem but also a sustained the 100% CPU usage whenever the application in the House is running. I made a few changes, first I changed the network card to a vswitch with no other guests connected, than giving a non-shared on the network connection to this comments

  I stopped our applications in the House that copies the edited files the client settings, change to the another vswitch, selecting ok...  Everything seemed fine, restarted apps and found no problem.

  The next day, I increased the RAM on the host of Meg 512 to 1024 Meg as the available physical ram was weak, and I suspected disk cache.  Stop the guest computer, editing the memory and it has increased from 1024 to vsphere...  Restarted and is the reason for my questions, which connects to run the application has been corrupted and would not load the profile.

  I should add that the application users often use the method "end task" through windows to complete the process as soon as they are sometimes does not.  Not something I tend to do what I think may be a cause of file corruption.

  My boss suggested that he believes that my approach is the cause of profile corruption, citing specifically the way in which I changed the vswitch that the guest has been connected.  My understanding at this point is that my approach was equivalent to not patch a machine and plug in another switch, and I don't see how, which could cause a windows become corrupt profile.

  Ideas of the community?  Expect honesty burtal if my method is in error.

  Change the who vswitch a virtual computer to connect during operation is perfectly accetable as only the switch that you move to can access the subnet of the virtual computer is configured for - it's like unplugging a [machine to go to an actual physical switch and plug it into a new physical switch -

• Can I change the server port, but Windows Mail continues to change at 25

  I can get my outgoing mail working by changing the port from 25 to 587, but whenever I close the Windows Mail application and re-open it, it comes back to port 25 (and will not work). Thanks for the help!

  You should always back up when you use a Microsoft product.  Your hard drive may die too.  But deleting the e-mail account does not delete messages, and repair the database will not ruin it.  I have not had one person complaining about this program (WMUtil) except for one person who said their antivirus software falsely reported that the file is infected (it was not).

  Steve

• change the com port assigned to the fax and scan

  I used fax and scanning for once.  I had to move my external modem to a different port.

  I don't know how to change the windows fax and scan com port manually.

  the wizard does NOT start, I guess because the fax is installed and worked until I had to change the number of COM port...  I need to change the number of pot with hundreds of research, it seems that no one knows how to change manually the Compote in windows fax and scan, unless they use the wizard.

  my assistant does not start. I guess I'm 'old school' I don't need an Assistant, I need to manually change the fax uses com port.

  :-), it's frustrating because help said only: click "fax" in the lower left corner, and they all assume the installation wizard starts and everything will be fine. :-(

  the wizard does not start. :-(

  I am desperate to get my fax work and need to know how to set the correct port number in a system that is installed and running, such as the wizard never starts.

  for anyone who goes out at the end of questions and ideas, I have a fax application stand alone who is working with the new port setting. It's just not a good app for my needs

  Please?

  Thank you

  John

  Post proposed by the moderator of the appropriate forum category

  Hi John,.

  You can follow the steps below to change the COM port for a modem:

  1. search the Device Manager.

  2 look for the Modem device, right-click on it, and then click Properties.

  • If the change settings button is present, you must click on it to make changes to the appliance. If the user account control dialog box appears, confirm that the displayed action corresponds to what you want, and then click continue.
  • If the change settings button is not present, the modem does not support the ability to change the modem settings. Refer to the documentation provided by the vendor of your modem.

  3. on the Advanced tab, click Advanced port settings.

  • If this option is not displayed, the modem does not support the ability to change the assigned COM port. Refer to the documentation provided by the vendor of your modem.

  If the same persists, we suggest that you post your query in Microsoft TechNet so that their support team will provide you in-depth assistance.

  Kind regards.

• Change the port Windows 8

  I always have problems with my DVD ROM.  Only manufacturer of drives will run, I tried several fixes and nothing has worked, it is for those who have this problem and changed the parameters of the port, the problem was solved quickly.  So, will someone Please instruct me how to change the Port settings.  I would like to set up the DVD player as a main.  I have a laptop HP Pavilion g7.  Please help; This problem has plagued me for weeks!

  In fact, there is nothing wrong with the discs. The question seems to be somehow related to theparameter "Legacy" OS. If I turn the setting reads all disks.  Now I just need to know EXACTLY what all the BIOS settings should be for the machine, for example I know now to disable "Secure Boot", but what of the rest of the parameters be.

• Windows 8 Remote Desktop connection - how to change the default 3389 listening port

  This article http://support.microsoft.com/kb/306759 has a FixIt who works with versions of Windows up to Windows 8, but does not work with Windows 8. How can I change the default port of 3389 to the computer listen in Windows 8?

  Hi Joseph,.

  You must connect to the TechNet, using your Microsoft ID forum to ask the question. Once you sign in you will get option for Ask question where you can post your query. See the screenshot:

  

• How to change the rmi port in atg

  Hi guys,.

  How to change the rmi port in atg

  who is the component to change port rmi in atg?

  The rmi port is defined in the component/atg/dynamo/Configuration. so in this Configuration.properties, you can change the value of the rmi port.

• Change the default port

  Can someone point me to a document that describes the steps to change the default port (8080) to another port on an existing Foglight environment?

  The Foglight Management Server (FMS) port is configured in FMSHOME/config/server.config:

  # These options are required, they must be configured for the server starts

  #

  Server.http.port = "8080";

  Server.HTTPS.port = "8443";

  You can change them by modifying the config file and restart the FMS.

  BUT:

  Remember that all Management Agent Foglight (FglAMs) use this port to send data to the FMS.

  Foglight users may have bookmarked FMS URLs with the original port number.

  Under Unix, a process must have permissions root a low numbered path (if you thought to change port 80)

  To make the seemless transition, you should consider implementing some sort of system (for example with an Apache web server) port forwarding so that agents and users who use the original port will not break.

  Kind regards

  Brian Wheeldon

• How can I change the outgoing in El Capitan mail port settings?

  My internet service provider recently changed the messaging port coming out (IMAP). How do I change this setting? I can receive messages but not send it. I can send email from the provider's Web site. It's already happened and usually I can send emails for several days. I changed the port settings in the past, but did not figure how to do it since the upgrade to El Capitan.

  If you know where to put the port, but it is not enabled, uncheck the box marked automatically detect and manage settings. Then, you should be able to change the port.

  The outgoing port will be in the SMTP settings. Each account has a configuration which you can access by selecting Edit from the context menu of SMTP.

• How to change the infrared port on Satellite M30 to be IrDA to be direct IR?

  Hello world

  I just bought a new watch that should be able to communicate with a pc via the infrared port (it's the Polar S710).
  Unfortunately, it does not work as the 'Protocol' of the watch is directIR, rather than be IrDA, as is my cell phone.

  I saw somewhere that it would be possible to change the infrared port of my laptop in order to operate in directIR. Anyone know the procedure? I think I could change something directly in the driver, but I did not how to deal with.

  I would be very grateful if someone could help me.

  Thank you
  SEB

  Hello

  I think that it of not possible to change the IrDA Protocol on the laptop.
  But have you tried to update the software polar?
  Consult the manufacturing site:
  http://support.polar.fi/PKBSupport.nsf/library?OpenForm

  If this does not help I think that only and an external solution as USB-> DirectIR dongle help

• Changing the settings for Port in the BIOS on the G20

  Hello

  I need to change the port settings in the BIOS as EPP, ECP etc for a printer. But when I go into the BIOS on my G20, there is no option for this. If I can't change these options, so I can't use my printer.

  Does anyone know if there is any way to change these settings, or if there are updates to the BIOS will fix this?

  Hello

  On which port you connected the printer to your Qosmio?

• How to change the settings of the BT COM port with the Toshiba BT stack?

  I have a Tecra S11 with Windows7 64 bit and I need to connect via Bluetooth to a remote the BT series device. I want to use the BT interface on board.

  The BT remote appliance 38400,8, N-2 (stop to the most common place 1 2 bits). Problem: I find nowhere to change local BT Com port settings.

  The physical port HW parameters can be changed. See:
  HW COM1 with the port settings: http://i42.tinypic.com/epg5qr.jpg

  But I don't get the same tab for the port of BT:
  BT COM40 without port settings: http://i40.tinypic.com/24mcduw.jpg

  Not even the BACK order 'mode' allows me to modify the ports of BT

  Curiously, if I have the COM40 to a virtual machine on the same S11-tunnel (virtualbox), the machine virtual XP * can * change settings and communicate correctly with the remote device. How is that?

  Can _How Yes, I change the port COM BT with the Toshiba BT stack settings? _ my version is 8.00.12 (T), which should be the most recent available. I also updated the BIOS.

  Thank you
  Paolo

  Additional details.

  I tried to run the application as Administrator: still does not work.

  I crossed Win registry with regedit and gave all permissions to all users: still does not work.

  With the registry editor, I forced the port in 38400,8, N, 2 in 'HKEY_LOCAL_MACHINE NT\CurrentVersion\Ports': still does not work.

  Note that not only the application target complains, but also does not work the PuTTY used as a terminal series.

  The Toshiba BT application see the remote device were undetermined, serial port, Dev.B. No provider.

  I'm lost and stuck. Advice greatly appreciated.
  Paolo

• Toshiba RL900A: Is it possible to change the label of ports of entry?

  Is there a way to choose your own labels for the input ports on the TV series, as the choice of entry provided do not give sufficient device names to identify the sources of signal.

  My previous Toshiba model (32c3000a) has allowed me to develop my own names for ports, which was more useful.

  Also, I am disappointed by the available sound quality and the volume of the built-in speakers, and lack of an exit to counter the problem, the "headphone" in use for a transmitter Infra-red, 'audio external' is therefore not available for "Muting" when silence is desired

  donhe7

  Find a manual for this LCD TV:
  [RL900A user manual | http://www.mytoshiba.com.au/file/download/resource/file/22528/rl900a-3240-english_t1.pdf]

  There are a lot of different parameters that can be set in the menu of TV s but I have found no information how to change the name of the label so I n t think this is possible.

  > Also, I am disappointed by the available sound quality and the volume of the built-in speakers, and lack of an output to counter the problem, the "headphone" in use for an Infra-red transmitter, 'audio external' is therefore not available for "Muting" when silence is desired

  I recommend reading the part of its control (user manual starting on page 23)
  There, you can find details how to change and improve the sound on this TV

• Manager profile - can I change the Port?

  Dear community,

  I have a little problem. A customer uses an OSX Server (to El Capitan. 10.11.2 + Server Version 5.0.15).

  The problem is, there is an Exchange Server that uses Port 443, so I can't use this port.

  My first test was a Port Forwarding of incoming: 8443 to macserver:443. I can reach the server, but when I log in, then it redirects me to the default 443 ssl port.

  I have checked the ssl httpd configuration, took a look in other apache-configs... changed ports 443 to 8443... but without success...

  How do you do that? Someone had the same problem?

  Thanks in advance

  No you can not change the ports using the Profile Manager. Even if you could change the ports at the end of the Profile Manager server, you have absolutely no chance of being able to change the equivalent settings built into iOS etc devices.

  Having two or more public IP addresses different so that the Exchange Server can have its own without conflict with the Profile Manager is an option that most of the larger organizations would use.

  It maybe by using a reverse proxy server could also be an option. The reverse proxy server would transmit 443 traffic to any server, it is by looking at the URL, for example exchange.domain.com:443 gets sent to this server and the mdm.domain.com:443 is passed to the other.

  NGINX is the main reverse proxy server software.

  PS. If it is not possible to overturn or transmit proxies the other ports used for profile, i.e. the NPP ports Manager, it is possible to reverse proxy standard web ports 80 and 443.

• Try to log back on IPAD, but the person who gave it to me a few years ago, decided to change the apple (ex-husband) ID so I should he trashy or is there a way that I can get

  Try opening a session back on IPAD 4, but the person who gave it to me a few years ago, decided to change the apple (ex-husband) ID, so should I trash or is there a way I can get in without using his information?

  Before you give, sell, or all the iDevices like Apple computer trading

  models, they must be separated with the owner of the user and the owner of the account IDs.

  What to do before you sell or give away your iPhone, iPad or iPod touch - Apple Support

  So if it had not been made, the original owner has to make.

  You may not can someone at Apple store; There may be

  other modes of action if the owner has died; only one

  Member of the family with legal authority, & documentation

  could do in special circumstances. The safety is part of

  a theft and deter identity. Sorry for the inconvenience.

  Good luck in this case!