change the vswitch, best practical question

Similar Questions

• How to change the answers to security questions?

  I don't remember having set up security issues.

  How to change the answers to security questions?

  I need to talk to someone?

  Yes

  Contact Apple security - Apple Support

• change the number of quiz questions in game

  I searched and searched the preferences, but can't find where to change the number of quiz questions in the race game treasure, available to active elearingbrothers.

  Thank you.

  They have tutorials on their Web site I've used in the past and have found it very useful.  I have used this model of game and if I remember correctly, it's in the menu variables.   Give it a try.

• Nexus 1000v and vSwitch best practices

  I am working on the design of our vDS Nexus 1000v for use on HP BL490 G6 servers. 8 natachasery is allocated as follows:

  vmnic0, 1: management of ESXi, VSM-CTRL-PKT, VSM - MGT

  vmnic2, 3: vMotion

  vmnic4, 5: iSCSI, FT, Clustering heartbeats

  vmnic6, 7: data server and Client VM traffic

  Should I migrate all the natachasery to 1000v vDS, or should I let vmnic 0.1 on a regular vSwitch and others migrate to the vDS? If I migrate all the natachasery at the very least I would designate vmnic 0.1 as system so that traffic could elapse until the MSM could be reached. My inclination is to migrate all the natachasery, but I've seen elsewhere on comments in forums that the VSM associated networks and, possibly, the console ESX (i) are better let off of the vDS.

  Thoughts?

  Here is a best practice-how-to guide specific to 1000v & VC HP might be useful.

  See you soon,.

  Robert

• Group by best practical question

  Consider this example:
  
  TABLE: SALES_DATA
  
  firm_id | sales_amt | d_date | d_data
  
  415. 45. 20090615 | Lincoln Financial
  415. 30. 20090531 | Lincoln AG
  416. 10. 20081005 | AM General
  416. 20. 20080115 | AM General Inc.
  
  I want the output to be grouped by firm_id with the sum of sales_amt and the d_data
  This corresponds to the last d_date (i.e. max (d_date))
  
  Application project:
  
  Select sum (sales_amt) total_sales, substr (max (d_data), firm_id, instr (max (d_data), ' ~') + 1) firm_name)
  Select firm_id, sales_amt, d_date | '~' || sales_data d_data
  )
  Firm_id group
  
  output is as expected:
  
  firm_id | total_sales | firm_name
  
  415. 75. Lincoln Financial
  416. 30. AM General
  
  I know it works, but my QUESTION is: is there a better way to do and is the method described above to concatenate the columns when you want to group several columns against best practices.
  
  Thank you very much!

  Here is a way that uses analytical (I just like them):

  SQL> select * from sales_data;
  
               FIRM_ID            SALES_AMT D_DATE               D_DATA
  -------------------- -------------------- -------------------- ------------------------------
                   415                   45 15-JUN-2009 00:00:00 Lincoln Financial
                   415                   30 31-MAY-2009 00:00:00 Lincoln AG
                   416                   10 05-OCT-2008 00:00:00 AM General
                   416                   20 15-JAN-2008 00:00:00 AM General Inc.
  
  SQL> select firm_id, sum_amt, d_data
    2  from
    3  (
    4     select firm_id, d_data
    5           ,sum(sales_amt) over (partition by firm_id) sum_amt
    6           ,row_number() over (partition by firm_id order by d_date desc) rn
    7     from   sales_data
    8  )
    9  where rn = 1
   10  ;
  
               FIRM_ID              SUM_AMT D_DATA
  -------------------- -------------------- ------------------------------
                   415                   75 Lincoln Financial
                   416                   30 AM General
  

• Size of the file - best practices

  I am putting together my first iPad app DPS and looking for a few tips to keep the manageable file size.

  I did a quick project about 6 pages and it came as a huge 28 MB. My document end will be about 100 pages (x 2 for directions)

  I really did nothing to try to reduce the size of the files in the project, I used PSD images with layers and not a not resize to 1024 x 768. Same thing with any jpg I used. I should do? Also, I did not bother to check if the image was CMYK or RGB. Basicially, I was working on the assumption that the images would be optimized in the process.

  I created the files using JPG because I wanted to use the content viewer Desktop and I get PDF's will help with the size of the file. But that will make a big difference?

  Is the largest part of this DPS overload just 28Mo or will it increase proportionally I've added pages?

  You are looking for just best practices.

  Thank you

  Brian

  A few tips:

  (1) we will be re-sample images to the right size, so don't worry if your sourc eimages are bigger they must do.

  2) publish as PDF. This will make a big difference if you have a lot of text content.

  (3) not to publish two orientations. While we do support the feature, this means you have to do twice the work of layout and the size of the file is quite a bit larger. Choose an orientation that works best for your content, and stick with that. The vast majority of our publishers only portrait or landscape, not both.

  Neil

• Single user, working on both machines, best practical question

  I use Dreamweaver at home and at work.  I'm working on my sites only.  I have just started working with DW and don't know the best practice to achieve.  The way I do now is through a folder synchronized on both machines that hosts the site.  The establishment is a local folder on the two machines that automatically syncs on the WWW.  I created a site on my machine at home with a folder root for the site and the images and then created another site on my work machine and was pointing at the root sync folders.  Is the best practice for this set to the top.

  I guese that im afraid of is the feature of auto update of links and such to within DW.

  Thank you!

  I have the same configuration and DW Check In / Check Out feature works for me.

  This requires a local copy of the site on home and work machines more copy remotely on the web.

  I have check no matter what files I need to work, modify and then download and archive when I'm done.

  DW manages everything.

• Best practical Question - update the query (see object) based on the drop-down list selection

  I have a question about the most efficient way to perform the following task:

  I create a page that contains several DVT components to display data based on specific requests.  Top of page I am hoping to have a drop down menu (selectOneChoice) that contains dates different and based on what the user selects (i.e. 2010, 2011, 2012, 2013, etc.), this will update the query in the view object of some (i.s. WHERE Date = '2011', or WHERE Date = 2013"), and then you view the appropriate data in the DVT.  What is the best way to do this - from a point of view bean managed / page, as well as the View object?  Advice/documentation would be appreciated.

  Thank you!

  When you drag the vo executeWithParams one another that will create links for operations such as 'executeWithParams2', 'executeWithParams3 '. On the method that you use to update a view by calling the executeWithParams operation, you call the other operations too.

  Timo

• Best practice Question

  Hello
  
  I have a question for the experts in this forum. First of all, I'm a guy from network so I apologize in advance for what I am about to ask...
  
  What is the best appropriate practice when the following three tasks need to happen on an Oracle database. If these use the same port for all three actions, or use different ports, or is it still important?
  
  1 administration
  
  2. access to application servers
  
  3 replication of database
  
  Just looking for a little education on this subject and I look forward to the answer from the experts. :)
  
  Thank you

  Ok. So a quick overview of the functioning of connections to Oracle...

  First, everything that connects to the database from outside machine will contact the listener Oracle (a separate process outside the database, but the database server). The listener then hand off the connection to the appropriate database. The listener is normally configured to run on a single port (1521), although you can configure the listener to operate on any desired port or to listen on multiple ports. One can argue that the listener running on a default undefined port improves security because an attacker would have to probe potentially many ports before they found the listener. But it's quite low security account bound to the number of places at the port must be kept.

  On most Unix systems (I mean at all, but I don't know that for sure), all communication with the database is going to happen on the listening port. On most Windows systems, however, the listener will redirect the connection on another port in the range unallocated. Which tends to be a royal pain if you try to connect through a firewall. You can force Windows Server through a single port as Unix (although no doubt there are performance implications to do). You can also use the connections through a firewall proxy Oracle connection manager.

  "Administration", although potentially covers a number of different things. If you speak of "DBA connects to the database via SQL * more to do s/n-ish things", then these connections pass by the listener, there is no change. Buy you can talk about things like using the web-based Enterprise Manager (using HTTP and HTTPS on the database server if you are using the control of the database with the HTTP connection that passes on a undefined port by default (7777 is common, I think)) or by using the Grid control or using SNMP to monitor the database and related processes resulting using a number of different ports potentially.

  Justin

• change the driver existing (newbie question)?

  Hello

  We try to change an existing driver, but we are fairly new to Labview. We have a few generic questions, but I'll give you some specific info on what we are trying to do as well.

  We downloaded a driver (for NDI Polaris motion tracker) of the site NOR and want to change that a little bit.

  The zip file contains a subdirectory ndipolaris with 2 files .llb and some .mnu files.

  Our first problem is that if we just open the .llb files, there are a lot of vi in there (including examples of work), but there is no project files, or class definitions. What seems to prevent us from creating a new class that derives from a class that is apparently set in the driver (but which we don't seem to have the definition). Maybe a driver can be distributed without these definitions such as you can use it only, but not change?

  Our second problem is that if we use the method of 'create the new existing driver driver', the Polaris NDI does not appear in the list of existing drivers. (It has copied the directory ndipolaris to the labview/instr.lib directory and restarted labview). (This is probably not a major problem that we could change just the existing driver instead).

  Note that the existing driver works well. We just add a timestamp in the data. The existing driver apparently has a class (called "Info Tool", which is a cluster of a few different types of data) for all these info than the Polaris returns, so we thought to change this class or to derive a new class with added timestamp.

  Sorry if this is a trivial question. Thanks for the pointers.

  Kris

  Hi Dennis

  Thanks to your suggestions, we settled it. We were baffled by the fact that you cannot add controls for "schema". Here's what we did:

  The data group was built using the "bundle by name" function, which takes a bunch of 'model' as input. It is this model that we had to change. However, as the model was a 'constant', it does not appear on the front panel and so we could not add any controls to it. For example, when you view the block diagram, we right-click on the clustering model, converted to a control, and then passed to the façade, created a new control (string) on the front panel and place in the control corresponding to the cluster model. Then we moved to the block diagram and convert our cluster model to a 'constant '.

  Not simple I think, but once you know (get help from you and read a bit of the operating instructions...), it's ok.

  Thanks again

  Kris

• ReReplace best practices Question

  On my page, I have a form with a text box. I want to replace the ampersands and quotes with the correct code. My question is, is it better to run rereplace it that I take the formdata and store it in my database or should I treat as in the query when CF assembles the page?

  Thanks for any help/tips

  This is how it is to be used now.

  I think you will find that as organizations acquire more data that find other ways to use the data in the future.

  The general rule is to store data as neutrally as possible and format it for the desired display when it is displayed, in this case in html.  Thus, when this time arrives in the future that they want some otherwise disply you do not take the problem of the deconstruction of the HTML stored in the database and convert it to a format.

• Location of the DB - best practices repository

  Hello

  We have two main Oracle DB, Production and Test servers.  The Production Server using dataguard and there is of course a server standby db.

  I'm getting up 12 c Cloud control EM and running on a new server. Is it better to install the DB repository on the SAME (local) server, or on our Production DB server?  Regardless of the place where, I'll raise dataguard to replicate the repository to a standby DB.

  I would like to have all the answers.  I looked through a few white papers, but can't seem to find the answer to this.

  Thank you

  I suggest to install on the same server, as long as you have a good amount of space on the server.

  Sincere greetings,

  Ansari

• I want to confirm a best practices question - Acrobat XI forms Standard used on an Apple operating system - is this a problem?

  I'm creating forms in Acrobat XI Standard on a 64-bit Windows 7 computer. I have reports that the forms do not work and I see silkscreen where policies in the fields of the form are larger and moved than in the original form, that I created. What happens on a Apple product. So is this a problem? I read a post of 2007 saying it was. But it is still today, and if so, is it possible to deliver a formula that works with both Windows and Apple using Acrobat XI?

  Thank you

  In addition, an extract does not support the features of shape, such as JavaScript, so a form most likely does not as expected. What you describe is one of the ways.

• What is the new 'best practice' for suncing VM in Vsphere 4.0

  I'm using my DC as the source of time used to an external time source... which is always recommended?

  I have all the Windows virtual computer.

  fix.  Windows time service is set to automatic and started by default and the synchronization of comment tools is not.

• Support/best practices to restore the application of planning between servers

  I have two servers with Hyperion Planning 9.3.1 (prod and dev) I want to copy the application called "BFS" Production of "NewBFS" - Dev server.
  
  As directed by our consultants, they said to do the following:
  
  1. backup the repository database that contains the application production BFS
  2 do a restore of the .bak file to "NewBFS" on the dev server database
  3. resync orphaned connections (from sql server connections and database connections)
  4 Ouvrezunesession planning via the default admin user ID
  5. go in the app's settings and change the URL
  6 enter the Shared Services URL
  7 manage the database
  8 check all the boxes and click Refresh
  9 go to SSP and resynchronize the native directory users
  
  However then try to connect in planning with something other than «admin", we receive an error «user xx is not configured...» »
  
  From my experience of db user tables are either still referencing production and/or do not have resynced correctly.
  
  If long story short... I can restore a planning application to another server, and if so what is the supported/best practices?
  
  Thank you
  
  JTS

  It is in the hyperion\planning\bin directory.

  Use :-updateusers.cmd serverName adminName password applicationName

  See you soon

  John
  http://John-Goodwin.blogspot.com/