Change the resolution of several Photos at once

Similar Questions

• change the resolution of several files/tracks at the same time?

  Hello

  We are now recording over 1000 LP to resolution 32 bit (float) for our records, but for our and the use of the public, we will have to 16-bit resolution. Is there a possibillity to change the resolution (for example 100 files) at the same time?

  IASA recommendations:

  http://www.IASA-Web.org/TC04/introduction-first-edition
  "It is recommended that all the sound elements scanned at 48 kHz or more and with a depth of at least 24 bit. «

  Thank you.

  Course

  To change the display, select file-> Batch Processing.

  Select your files, and then re - sample parameters

  Too easy.

• How to change the resolution of a photo in photoshop for high quality printing?

  I am confused about how to check the actual resolution of an image in Photoshop.

  I understand 72 DPI is set for the web and 300 DPI is normally required for high quality printing but how do you check the dpi in Photoshop. When you go to the size and resolution of the image, it is always in pixels (ppi)? Is it the same thing as the dots per inch?

  For example. If I open a photo in Photoshop and the resolution is 72 dpi can I change this at 300ppi so that's 300 DPI when it goes to print?

  Also is there a way to check the resolution of a picture that has been placed in indesign or illustrator without opening the image in photoshop?

  Thanks in advance

  You should check up to resample it for any nationally - or down.

  If you want to convert to CMYK, you must use the correct profile, the results may not be as expected.

  CMYK profiles are dependent on the device - the press is either calibrated to a known profile (which may be available in Photoshop), or he has a profile, which you would have to get the printer.

  If you want to print an Indesign document, the recommended workflow is to export to PDF and converting CMYK when the pdf file. The CMYK range is smaller than RGB, so unless you're aware of this, you will have a few surprises.

  You cannot print very saturated colors with CMYK and blues often come different looking than RGB.

  If you configure the Color PS with CMYK (workspace) profile settings, you can (work in RGB) press Ctrl + Y and get a glimpse of what will look like colors in CMYK. You can even edit in this mode, tweaking colors, but of course limited by the CMYK range.

  For all this to work and get good results, you must have a calibrated monitor, and it helps it of course to have a good printer, who knows what she's doing. And, if possible, be there during printing. Printing on an offset press is not like printing on your desktop printer - there are much more variable.

• Change the Description of several photos

  I emphasize the relevant photos and change, the Description field within information (Cmd + I).

  But when I click on out of the box Info, he asks me if I want to change the description of 3 000 photos (pictures of this year, not only the photos that I have highlighted).

  No idea why it does this? Is there another method of updating the Description?

  Thank you

  How you change the descriptions is exactly how it should be done. Select the photos in the browser, open the Info Panel with ⌘I, and enter a new label.

  MacBook Pro with the retina, OS X El Capitan (10.11.5)

  Your profile signature OS X El Capitan is still valid?

  I had a similar problem when running left El Capitan.  Occasionally, Photos would change the description field of all the photos in the album, I was displayed and not only the description of the selected photos. And for the fields title, this would change a title that I had chosen.

  On the Sierra, I noticed that the browser is sometimes loses focus for the cursor. When I use the Trackpad and not by the mouse.  If the Info Panel is opened for a few selected photos, a reckless trackpad gesture can move the focus to another album in the sidebar and the Info Panel passes to this album, and then by typing in a different title or description will show the warning about editing thousands of photos.

• How to change the resolution of a photo print in ipad?

  Hello

  Can someone help me on this topic?

  When you print a picture of the Ipad It only prints in small (13x18cm) in an A4 page.

  I need to print pages of magazine so I take a photo and then print... But it's in a small size as photo paper...

  How do you know the solution?

  Thank you

  Lotfi

  Hello lotfi070,

  You can try to download the HP ePrint home & biz app on the App Store. It provides a little more options when you try to print photos from an iPhone, iPad or iPod. You should be able to specify the paper size, paper type, image size and color options.

  I hope this helps.

• Can I change the resolution of the Photos that can be downloaded from a shared album?

  Authorized visitors of an album that I published and shared can upload photos attached as a file "" big JPG. However, it seems that the resolution of these JPG files is fixed. Is it possible to change the resolution to higher values?

  Thank you

  Klaus

  Adobe generate DNG Smart insights via creative Cloud infrastructure; If the resolution is fixed but these mobile previews LR, used for synchronization, do not count toward your storage limit.

  However, you can use your storage limit to add any image resolution to one of your active files and share a link - see image below.

  Simply launch Creative cloud and switch to the active tab choose the folder to add pictures. Click on view on the Web to generate a public link.

  

• CS6 on a pc.  Cannot change the resolution on photo downloaded from my Android phone.  What should do?

  CS6 on a pc.  Cannot change the resolution on photo downloaded from my Android phone.  What should do?

  You should find the forum for any product it is and post your questions there.

  Here is a link to a page that provides links to all of the Adobe forums...

  The Forum links page: https://forums.adobe.com/welcome

• zBook 14 - cannot change the resolution of the screen after update

  After I installed software updates the portable suggested to me, my screen resolution went suddenly from 1900 x 1200 at 1200 x 720 after reboot and it won't let me change it, not even to a lower resolution. I'm very frustrated, because I need the computer week next for visualization work and I really need the screen works well.
  
  It doesn't let me change the resolution. Graphics and display drivers are up-to-date and functioning according to Device Manager. I did a system restore, but that just do everything worse although the resolution worked once again thing, I had to run a repair of the start several times before that my laptop would be starting another property again. This does not resolve the issue, given that the display drivers are not working properly (videos have been viewed very badly) and even after updating the computer won't start again, so I had made another system of recovery and now I'm to the point where I can not change the resolution and starting to be really frustrating. Also, (if it even starts) Windows is constantly freezing, forcing me to hard reboot.

  Thanks for any help, that all the world can offer.

  This looks like a lot of problems, you have there.
  
  First thing I would say is to do a check of the basic material. Your laptop will be built Diagnostics the F2 button on the HP logo. The hard drive on a test extended (approximately 45 minutes - 2 hours) and the memory test. If these two go, consider downloading of UEFI diagnoses from the above drivers download section. In all honestly, I think this unnecessary step for most, it tells not usually defects that are already not obvious. But he should have a graphics test, if it will throw a failure even if it is faulty is another matter but when even, of a value of a test.
  If all else fails, download on the phone for the HP warranty.
  
  If anything fails, run the memory on memtest86 + for about 12 to 24 hours. Download you, it's free, burn it to a cd and the start of it. And it works simply, in case of error, you have a fault memory.
  
  If anything fails on any diags, then nothing is most likely false, cool reimageries windows probably will solve the problem and its probably just a form of spyware or corruption of driver or something. Backup your data, reinstall a new copy of windows.
  
  But in my experience, from doubtful, repairs etc... freezing randomly and other problems are often a sign of a failing hard drive. And diagnostic tests are not always 100% to pick up a failing drive. For the most part, but not always. So, if its still high reading after a reimage, review the reader always a potential source of the problem.
  
  To the extent where it won't let you change the resolution? What you mean? As for the option is grayed out? Can you maybe post a screenshot and a screenshot of your device with the extended graphics card Manager.

• Cannot change the resolution on the coming Pro 11 webcam settings?

  Is it possible to change the resolution settings of the built-in Tablet coming 11 Pro webcam? We need to reduce the size of photos that are taken, and there is no way that I can find in the system to do this. We have several tablets of 10 of Latitude, and they allow to change the resolution of the webcam. I called Dell technical support, but the technician could not find a way to change these settings or the other. He tried to install the Dell Webcam utility but he ended up turning off the camera and I had to do a system restore. Any opinion on this is greatly appreciated! Thank you!

  Dell provides no information for installed webcams which makes it impossible to find or see if the real drivers are provided the manufacturing (they could even provide some sort of camera app to set up and take photos). Who knows?
  Device Manager displays only the information of default built-in webcam and drivers Microsoft.
  The default camera app Windows 8 is archi-nu and does not provide parameters improved.

  You might want to try Cyberlink YouCam Mobile. Never tried but I checked in there just now and saw that the resolution was one of the parameters. Not sure if it is already in the free version or not.
  Other applications of the free camera maybe the settings as well.
  Just check out some and you'll see.

• Change the location of several pictures at the same time?

  I see how to change the location of a photo at a time. Is it possible to change the location of several pictures at the same time?

  Thank you

  Phil

  Select the photos and info - enter the location (or any other field of the info) and it is applied to all photos

  This is described in using Photos - a good place to get help with Photos

  View and add information about the photos

  To view or change information for the photos, you select one or more photos, and then open the information window.

  

  • Open the Info window: Double-click a photo to view it, and then click the Info button in the toolbar or press on command I.

  • Add or change information: Change the following.
    • Title: Enter a name in the title field.
    • Description: In the Description field, type a caption.
    • Favorite: Click the Favorites button to mark the photo as a favorite. Click the button again to deselect.
    • Keywords: Enter the keywords in the keywords field. When you type, Photos suggest keywords that you have used before. Press enter when you have finished a keyword. To remove a keyword, select it and press DELETE.
    • Faces: Click on and type a name to identify a face. Click on several times, and then drag the identifier of the face different faces to identify many faces in a photo.
    • Location: Enter a location in the location field. When you type, Photos suggest places you can choose. To change a location, you can search a different location or change the location by dragging a PIN on the map. To remove location information, delete it or choose Image > location, then choose Remove location or back to the original location. You cannot assign a location if your computer is not connected to the Internet.

  LN

• I can not scan several photos at once

  I have a hp deskjet 3052 has windows vista.   My old printer was able to scan several photos at once and save the pictures to separate files.  It does not seem to do that.  I intend on scanning multiple photos and plan on using this printer and get something else, if it is not possible to the software to make or load.  Anyone know where I can find a list of printers that will do this?

  After 4 years, I was sent the software. It seems to work fine if I put the pictures away from the edge of the scanner.  My scanner still works, so I'll use this program. I'm very happy with it.

• How can I change the resolution of my pictures stored in Google Reader?

  How can I change the resolution of my pictures stored in Google Reader? I want to have received their approval, but they were taken with a phone and the resolution is not large enough to produce a clear image.

  Hello

  You cannot add true / resolution of the details of an image that is not captured when the photo was taken. Photo editing applications can adjust the sharpness, remove noise, etc., but they can't add true / resolution details and results may vary, massively, the photo and the filter/tool used (and configuration for tools).

  If you have reduced the resolution of the original image to store it on Google Drive, then I suggest that go back you to the use of the original image (if you still have a copy).

• By doing a screen shot: if I change the resolution?

  Hi, I was wondering if there is a way to change the resolution of a screen shot when I do one with Windows XP. I want to make a better quality.

  I noticed that when I do a screen shot and paste into mspaint or scanners of my image editing program: it might not matter since I can crop and improve the image a bit. But sometimes I need a better shot.

  Does anyone know the resolution of XP Home Edition - Vistas Home Premium 64 - bit - screenshots of SP2 or SP3?

  Would be the steps, if it takes place, is the same for Vista?

  Thank you.

  Thank you.

  =========================================
  You are welcome.

  Just a reminder... If you increase the resolution of your desktop...
  your screenshots could follow suit. (This adjustment
  is located at: control panel / display / settings tab /.
  Drag the slider to change the resolution) these settings
  are limited by your video card driver... you
  perhaps already in the maximum position.

  FWIW... you can increase the resolution (pixel size) of
  all existing (digital photo) screenshot of resizing. If
  you use an option called Resampling, the result is a little
  better.

  The free software IrfanView has the Resample option.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  IrfanView and IrfanView plugins
  http://www.download.HR/download-IrfanView.html

  For instructions on resampling research using IrfanView to resample.

  Good luck

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• How can I change the resolution to enforce my text smaller when I can't button?

  The text on my screen is so big that when trying to reduce its size by changing the resolution, I can't have at the bottom of the page where it says to apply the change.

  If talk you about Control Panel, appearance and personalization, display options, just selectSmaller - 100% (default value) or average - 125% and press on to apply the changes. Once you have made a change in the options, the apply button becomes the action by default for the key.

  Alternatively, immediately after selecting new font size, you pouvez press Tab once to divert attention to the apply button, and then click the key, but I believe that it is unnecessary.

• Impossible to change the resolution after a system restore - please help

  This afternoon I had my PC freeze when using iTunes. I tried to restart but got major error messages. I had to use "System Restore" a number of times that to have the machine to restart a version blown upward my wallpaper - no cursor, icons or the ability to use the button start. I finally managed to get back to a point where I still once restored the system but still once stood breathtaking version of the background, however, this time with the slider control. When I right click on customize, it does not open for me to change the resolution.

  Can someone help me? I am desperate because it's in the middle of football records and I urgently need my PC in working condition.

  Fixed. Corrupt graphics card. Downloaded and installed new drivers.