By doing a screen shot: if I change the resolution?

Similar Questions

• Impossible to change the resolution after a system restore - please help

  This afternoon I had my PC freeze when using iTunes. I tried to restart but got major error messages. I had to use "System Restore" a number of times that to have the machine to restart a version blown upward my wallpaper - no cursor, icons or the ability to use the button start. I finally managed to get back to a point where I still once restored the system but still once stood breathtaking version of the background, however, this time with the slider control. When I right click on customize, it does not open for me to change the resolution.

  Can someone help me? I am desperate because it's in the middle of football records and I urgently need my PC in working condition.

  Fixed. Corrupt graphics card. Downloaded and installed new drivers.

• zBook 14 - cannot change the resolution of the screen after update

  After I installed software updates the portable suggested to me, my screen resolution went suddenly from 1900 x 1200 at 1200 x 720 after reboot and it won't let me change it, not even to a lower resolution. I'm very frustrated, because I need the computer week next for visualization work and I really need the screen works well.
  
  It doesn't let me change the resolution. Graphics and display drivers are up-to-date and functioning according to Device Manager. I did a system restore, but that just do everything worse although the resolution worked once again thing, I had to run a repair of the start several times before that my laptop would be starting another property again. This does not resolve the issue, given that the display drivers are not working properly (videos have been viewed very badly) and even after updating the computer won't start again, so I had made another system of recovery and now I'm to the point where I can not change the resolution and starting to be really frustrating. Also, (if it even starts) Windows is constantly freezing, forcing me to hard reboot.

  Thanks for any help, that all the world can offer.

  This looks like a lot of problems, you have there.
  
  First thing I would say is to do a check of the basic material. Your laptop will be built Diagnostics the F2 button on the HP logo. The hard drive on a test extended (approximately 45 minutes - 2 hours) and the memory test. If these two go, consider downloading of UEFI diagnoses from the above drivers download section. In all honestly, I think this unnecessary step for most, it tells not usually defects that are already not obvious. But he should have a graphics test, if it will throw a failure even if it is faulty is another matter but when even, of a value of a test.
  If all else fails, download on the phone for the HP warranty.
  
  If anything fails, run the memory on memtest86 + for about 12 to 24 hours. Download you, it's free, burn it to a cd and the start of it. And it works simply, in case of error, you have a fault memory.
  
  If anything fails on any diags, then nothing is most likely false, cool reimageries windows probably will solve the problem and its probably just a form of spyware or corruption of driver or something. Backup your data, reinstall a new copy of windows.
  
  But in my experience, from doubtful, repairs etc... freezing randomly and other problems are often a sign of a failing hard drive. And diagnostic tests are not always 100% to pick up a failing drive. For the most part, but not always. So, if its still high reading after a reimage, review the reader always a potential source of the problem.
  
  To the extent where it won't let you change the resolution? What you mean? As for the option is grayed out? Can you maybe post a screenshot and a screenshot of your device with the extended graphics card Manager.

• Why I can not change the resolution of the screen on the comments?

  Greetings,

  I used VMware Player to create a RHEL 5.5 on Windows 7 host. The resulting virtual machine has a screen 1440 x 900, but when I run the screen is 800 x 600. With the help of the utility comments to change the resolution of the screen only gives the choice of 800 x 600 and 640 x 400. Note that the installation of comments has been made using 'I'll install the operating system later'. If this option is not used and that the guest is installed either using the 'easy' option or the 'Advanced', this problem does not exist. Anyway, there is a big difference between a genberated of comments using the 'easy' or 'Advanced' option and the generated with the option "I will install later. Any suggestions would be much appreciated.

  Many thanks in advance,

  Nicolas

  VMware tools are installed in the comments? Next to important things, they contain the video driver that allows to change the resolution.

  AWo

  VCP 3 & 4

  \[:o]===\[o:]

  = You want to have this ad as a ringtone on your mobile phone? =

  = Send 'Assignment' to 911 for only $999999,99! =

• My daughter played a game that changed the resolution of the screen on the reboot I see is no longer anything on the screen!

  My daughter has tried to play a game of old trails Oregon of a disc. It made him change the resolution to which she did not return to the stop down. Now, to restart, we are unable to see the screen after windows starts. Any suggestions? We are running Windows Vista.

  Hello

  Although she has changed the resolution, you should still be able to see a logo when the BIOS boot screen loads. IF this isn't the case then something else happens.

  To solve this problem I would boot windows in safe mode, so you can load windows into a default resolution. To do this, when you turn on the PC press, key F8 before Windows loads. (do this as soon as the BIOS screen disappears)

  You will be asked to choose from a number of advanced options, is the option you want to select:

  Turn on the video resolution (640 x 480)

  This will load windows in this resolution, so you can set it manually to your favorite resolution.

  Let me know how you go with it.

• Changing the resolution of my screen. I have changed to the wrong setting and now I have a white screen

  On my screen, I changed the resolution and now when windows comes on, it displays the first "Windows XP" logo and then, when Windows actually opens, the screen is blank. I can't see anything to restore.

  juljil2006,

  pressing F8 immediately after your screen manufacturers and selecting 'Enable VGA' in the menu. Then I put just the resolution to 800 X 600. Then return to high resolution

  Good luck! Please rate me upward if you find my post helpful. Thank you!

• How to change the resolution of the screen when the "input not supported" message after reboot

  I need to change the display resolution to 1600 x 1024 after I changed my 1900 x 1200.
  the problem is,
  the "input not supported" message when I reboot the PC and does not allow me to do anything.
  He presents himself before the logon prompt.
  I restarted to fail safe with the command line with the id of the administrator and was able to change the resolution, but
  He returns to the State ("input not supported" and no prompt connection) after I restart the PC

  Mark,
  Thank you for your help,
  I tried in vain,
  I just used another monitor with a higher resolution, restore the previous resolution and swap the monitor again.

  Kind regards

  Claudio.

• HP Deskjet 710C does not print colors (also after changing the cartridge with a new one)

  HP Deskjet 710C on Windows XP

  Problem: Printer does not print color. Black printing works. It also does not print color now, I changed the color with a new cartridge. Remove the printer from Windows XP and reinstall also does not resolve it. Also by using the option in Windows/printer driver for the cleaning cartridge has failed. Anyone know a solution to this?

  There is a document about the lack of color of the issues on the printer Deskjet 710C that can be found here.

  I hope this helps!

• I use a 27 "lcd screen and I can not change the resolution, the slider will not slip off, also windows is a generic monitor, I need to change for aero to work

  I want aero to work but also to set up a game for my kids fisher price system but I need to change the resolution in order to make it work and trying to drag the slider, he's not moving that I also need to change to 32 bit which I'll beable when I change the resolution.  the settings suggested for my monitor is higher they have the value but I can't change.

  Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  Then:

  http://Windows.Microsoft.com/en-AU/Windows-Vista/change-screen-resolution

  Change the screen resolution

  Screen resolution refers to the clarity of the text and images on your screen. At higher resolutions, items appear sharper. They appear also smaller, so more items adapted to the screen. At lower resolutions, fewer items adapted to the screen, but they are larger and easier to see. At very low resolutions, however, images may have serrated edges.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows 7 to put on the desktop, it is too big for the screen, facing problems to change the text.

  Original title: problem with windows 7

  just had windows 7 put on my desk top of the page. It is great for reference but itwon can't I would like to change the text. If I change the resolution, that it makes the photos so you can really see them.it won't let me up the screen so I can't ask anything,

  Hello

  If you recently installed Windows 7 on the desktop, you can try the following steps and check if it helps.

  Method 1:

  We can refer to the computer or the device manufacturer's Web site and try to install the latest version of the display card drivers and check if it helps.

  Update drivers: recommended links

  Method 2:

  It can also refer to article and try the steps to solve the problem.

  Make the text on the screen larger or smaller

  Hope the helps of information.

• Change the resolution of the screen and the screen went black

  Then I tried to change the resolution of the screen and the screen went black.  I tried to restart, plug in my HDMI port on my TV... Nothing.  So I went with a system refresh (yes I'm sure it was a refresh and not a restore).

  The fact that there is no integrated procedure to detect the moment where that happens and return to the old resolution is annoying enough...  But now after that choose the system update and it would be only to reset the settings to default back and keep all the files (as he said it would be), I am extremely frustrated to know that it has deleted ALL my programs.  Program E-v-e-r-y.  This means that Chrome, Firefox, jGrasp, AutoCAD, all my programs Microsoft Office, all my Adobe stuff, my Visual Studio and so much more that I'm not naming.

  I REALLY hope there is a place where they were stored so I don't have to reinstall everything manually.  If not, then wow, Microsoft... We finished.

  Unfortunately a refresh as he said, only maintains personal records (program data), the data can be located in the "in the"Windows"folder windows.old folder normally C /: Drive, all modern apps should be kept."

  All programs of office/legacy (Chrome, Firefox, jGrasp, etc.) need to be relocated from their original sources

  Keep all of your programs, personal files (data), settings, the best option is to create a "Disk Image" - see link below for info.

  http://Windows.Microsoft.com/en-AU/Windows7/choosing-an-advanced-recovery-method

• Photoshop, change the resolution of the screen on startup

  Hi all

  I'm working on a new Dell XPS 15 laptop computer. All the drivers are up to date. I tried to reinstall the Psalm

  Everytime I open Photoshop the screenresolution is automatically changed to 2560 x 1440 to 1920 x 1080 and I get an Error Message in the background (the operating system is not configured for this application). I can manually return and continue working. But next time ill start it happens everywhere. It's a little boring. All other Adobe applications seem to work well.

  Thanks for help.

  Photoshop cannot normally change your screen resolution, but there are applications that can be configured to change the resolution as launching an application. On Windows when an application is run in compatibility mode possible of put so the resolution also changes. Click right photoshop.exe, select Properties, compatibility and check any of the boxes of resolution are verified. I'd watch if there is a utility on your Dell running in the background designed to change the resolution.

  I took a glance at your laptop and its native resolution is 3840 x 2160, No 2560 x 1440 except that varies from a model. It is worth noting is 3840 x 2160 (1920 x 2) x (1080 x 2) and you get the half that is 1920 x 1080. This could suggest that you set Photoshop to the scale of the display. Make sure that the parameters of scaling in your preferences are fixed to 100%

  

  Hope that helps

  Terri

• Box of OK to change the resolution of the screen is masked by bottom 1 inch of things. How to access?

  Was able to change the resolution to higher than 1074 x 768, now can't change at 1074 x 768.

  Hello

  Use the ENTER key to OK

• XP Sp3 cannot change the resolution. All of a sudden changed on 3 PC 20 overnight.

  I have a client with DT 20 HP Business class PC with XP Pro and all are Sp3. They were very well one day. First one and then another and then another reset screen 640 x 480 and I can not change the resolution. They are all the same material. Video NVIDIA 6150. They have all been analysed and have no malware, etc. We tried to uninstall the video driver and put it back in place of the original, install the latest driver from Nvidia, then later that of HP without result.  We tried to restore a system to a week earlier to nothing does not. We tried using the user admin rather than an opening of rights 'user' and yet one time not the ability to change the Res. Any ideas? At this stage it seems certain day MS like this everything that can be install from one day to the next on all 3 PC. I cannop imagine that all 3 had video card failure.

  Have you tried the steps in the resolution of the video display problems?

  "Resources for troubleshooting display problems in Windows XP"
    <>http://support.Microsoft.com/kb/307960 >

  You can also get there by right-clicking on your desktop-> properties-> (tab) settings-> troubleshooting
  Then in the next screen, select 'I can't adjust the video resolution above 640 x 480 x 16 colors... »

  HTH,
  JW

• Change the resolution of normal-vista through Safe mode-vista

  Hello!

  I installed a demo version of this game of strategy, 'Starcraft 2 '. After installation, I try to play. However, without warning the game changes permanently my screen resolution to a value that is compatible with my monitor (says my Samsung TV/Pc monitor ~ "cannot display resolution")

  Even after restarting Vista, remains the problem of resolution. Still no display.

  Vista safe mode, but displays in another resolution and works very well (I am writing this message in SafeMode). Now, I can change the resolution here, but whatever the changes I make do not transfer to normal-Vista mode.

  If anyone, please tell me, How to change the display resolution of the normal mode, safe mode? Alternatively, how can I change the resolution, 'the eyes bandaged?

  I uninstalled and will avoid the game.

  I also tried the system restore, twice in fact, just to be sure. Picked dates from before I even heard of the release of the demo, but it still does not work. The display resolution is still off enough to leave my empty screen.

  Try the following, but do it in Safe Mode so that you can see everything on the screen...

  1. set DPI:
  Right-click on a free space of the desktop > customize > column to the left, adjust the size of police (in PPP) > uac prompt > click default scale (96 DPI).

  2. resolution:
  Right-click on a free space of the desktop > Personalize > Display Setings > move the slider to the right or left whatever the case may be. Check your user manual, see if she tells you what resolution is for your computer. My laptop is using 1280 x 800 pixels.

  Here is a table of the guide line:

  Monitor 15 inch	1024 × 768
  17 to 19 inch monitor	1280 × 1024
  monitor 20 inch and liked	1600 × 1200

  
  

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.