Change the size extraction sql array by query or the worksheet

Similar Questions

• Difficulty the front Dimension of the array, but allow the user to change the size of the array

  Hello

  I know there are a few other posts on table and scroll bars but mine is a little different. I want to have the physical size of the fixed table control and allow the user to change the size of the array as required and a scroll bar if the number of elements exceeds the specified physical dimension. I wouldn't mind if, at the end of the scroll bar, the user sees an uninitialized element.

  Thank you very much

  Hello

  The problem I have with the property Num Row node is it seems to replace the scroll bar. Whenever I try to change the line number, the table automatically resizes its physical size on the front and the scroll bar has no effect.

  However, I solved the problem by taking row completely digital. I just said if the table size is > to a constant value (i.e. 3), add a scroll bar and my front panel dashboard to be a size larger than what the value of this constant is size. Once I begin to add values in sequential order and I get to the fourth value, the scroll bar is added and the scroll bar has a feature where it adds an element of null for you, so if I fill this null element I just increased the size of the table and another null element appears underneath.

  Thanks for the help

• change the size of array without initializing

  Hello

  I'm trying to dynamically change the table size.

  I'm doing a calibration of an instrument and from time to time I read 3 parameters and try to write in an empty array (do not reset) and caclulate interpolation polinom according to my measured data.

  The table must be empty because I use the same table as input for the calibration procedure and it may not contain the zero but only the measured values and it will develop that my flow measurement.

  I hope that my question is simple,

  Kind regards

  Sasa

  Hello Sasa,

  two options come to mind:

  (1) use the BuildArray to 'grow' your table of measurement points. Add only "not null" points to the table...

  (2) search the forum for discussions on 'remove items from the table', you will find something like this...

• Puzzled by changing the size of the array of Bell Curve (or made gaussien)

  I use an instrument which entered a table 1 d signal. When you draw the it, it looks a lot like a Gaussian function (it looks very good too).

  What I want to do is to change the size of the array of this input function (basically I want to increase the size of table).

  For example, when you look at the picture attached, you will see that the size of the curve in the picture on the left, which is the GROSS ENTRY, 70 =.

  What I want to do is to change this size to a number of interest (for example, let's say 80)...

  So basically I want to insert 10 new numbers in the table (in random places), but I want these 10 numbers to fit on the best-fit-the signal line (like you see in the image to the right).

  So I tried to use Gaussian worthy, and cubic spline worthy... etc but none of these features allow me to change the size of the table of the output to adapt.

  Any of them do not give you the equation of the line of best - fit either... so I can't solve Y for a known X.

  It is very important for me to continue my project.

  Thank you very much

  Look at the palette under Interpolation in the math palette.  You can find something that will work for you.  It will not add points on the equation, but should allow you to get more points along your curve.

  Lynn

• How to change the sizes of elements of array programmatically?

  Hi all

  I have a small question about changing the size of the elements in the array. I hope someone can help, because I am in a bind!

  I connect certain intensities of a range of fibers using a camera. For the calibration of the system, I gain a picture of the camera, click on the image points to divide it into areas of interest. I have my image to overlay with a grid indicating the areas of interests - for example a 4 x 6 picture. I then have to select fibers - or Kings - I want to connect from.

  I have a cluster type-def (a number and a Boolean value) to specify the number of fibers and to enable logging of this fibre power. I superimpose a (transparent) picture of this typedef on my image to correspond with the regions of interest. So here's my problem - I want to change the dimensions of the table for each control corresponds to my KING. I can resize the elements of law on the elements on the façade, but couldn't find a way to do it programmatically. The array property node > element of array > limits don't "change to write" it's the first thing I tried.

  Its only really important elements alignment with my Kings - so adding in the gaps/spacing programmatically would also work for me... goal again once I can't understand how to do this! I've attached a screenshot of part of my image with table superimposed to show you all exactly what is my problem.

  Thanks in advance for you help,

  Dave

  PS I'm under Labview 8.6 without adding vision on.

  Here is my cheat (and cheap) way if you want to get fancy and Center digital indicators and booleans, you could add shims on the North and west sides, too.

• Change the color of the cell of the results of the query, the font size, style

  Change the color of the cell of the results of the query, the font size, style
  Hello
  I have this code below and let me know if it is possible to make the column header a different font style
  Example:
  Font size = 12
  Verdeña
  Blue
  And the cell in the name column in a different color for ex
  Yellow
  
  
  Is it possible here and where this code should I put it?
  
  Thank you very much
  
  
  < cfquery = name "gelov datasource ="kl90">"
  SELECT
  -------------------------------------------
  
  Of
  --------------------------------
  WHERE
  -----------------------------------------
  -----------------------------------------------------
  
  ORDER BY
  < cfswitch expression = "#Form.orderBy #" >
  < cfks value = "KSNUMBER" >
  KS. KS_NBR
  < / cfks >
  < cfks value = "DATECREATED" >
  KS. KREATDAT
  < / cfks >
  < / cfswitch >
  < / cfquery >
  
  <! - report html - >
  < cfswitch expression = "#Form.outputFormat #" >
  < cfks value = "HTML" >
  
  <! DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional / / IN" " http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd" >
  "< html xmlns =" http://www.w3.org/1999/xhtml "> "
  < head >
  < meta http-equiv = "Content-Type" content = text/html"; charset = iso-8859-1 "/ >"
  Report Kss Ctwye < title > < / title >
  < / head >
  < style type = "text/css" >
  table {}
  do-family: Arial, Helvetica, without serif.
  do-size: 10px;
  }
  TD {}
  do-family: Arial, Helvetica, without serif.
  do-size: 10px;
  }
  Th {}
  do-family: Arial, Helvetica, without serif.
  do-size: 10px;
  }
  H2 {}
  do-family: Arial, Helvetica, without serif.
  do-size: 12px;
  }
  H3 {}
  do-family: Arial, Helvetica, without serif.
  font-size: 13px;
  }
  < / style >
  
  < body >
  < cfoutput >
  < table border = "0" cellpadding = "3" cellspacing = "0" >
  < b >
  
  < td align = "center" >
  Kss Ctwye report < h3 > < / h3 > < br > < br > < table >
  < /tr >
  < b >
  < td align = "center" >
  < / h2 > report returned #getCtwyeKss.RecordCount # entries < / h2 > < table >
  < /tr >
  < b >
  < td >
  < table border = "1" cellpadding = "2" cellspacing = "0" >
  < b >
  
  < td width = "160" > Ks number < table >
  < td > K-date < table >
  <!-< class = 'dataField' td > address < table >
  < class td 'dataField' = > Type < table >
  < class td 'dataField' = >-> Description < table >
  < /tr >
  
  < cfloop query = "getCtwyeKss" >
  
  
  < tr bgcolor = "< cfif currentrow mod 2 > F8F8FF < cfelse > WHITE < / cfif >" >
  < td > #KS_NBR # < table >
  < td > #dateformat(KREATDAT,"mm/dd/yyyy") # < table >
  
  
  < /tr >
  < / cfloop >
  
  < /table >
  < table >
  < /tr >
  < /table >
  
  < / BODY >
  < / HTML >
  < / cfoutput >
  < / cfks >
  
  < cfks value = "CSV" >
  
  
  < NAME CFHEADER = "Content-Disposition" VALUE = "attachment; filename = ctwye.csv">
  < cfcontent type = "application/msexcel" > "Ks Number', 'K-date '.
  < cfoutput query = "getCtwyeKss" > #ltrim (KS_NBR) #, "#dateformat(KREATDAT,"mm/dd/yyyy")" # "< tr #IIF (getCtwyeKss.CurrentRow MOD 2, OF (»), DE('backgroundColor="##999"')) # >"
  
  
  
  <!-< tr bgcolor = "< cfif currentrow mod 2 > # 808080 < cfelse > ##ffffff < / cfif >" >-->
  < / cfoutput >
  
  
  < / cfks >
  < / cfswitch >

  There is a suggestion in your other thread

• Change the font color in a report by using the SQL query

  Hello
  
  I'm changing the font color based using a BOX the query in the form below:
  

  select "ORDER_ID", 
  "ORDER_REFERENCE",
  "ORDER_DATE",
  "ORDER_SOURCE",
  "TOTAL_DISCOUNT",
  "DELIVERY_TYPE",
  "PICKUP_DATE",
  case
       when order_status = 1 then '<font color="red">'|| order_status||'</font>'
       else
       '<font color="blue">'||order_status||'</font>'
  end order_staus,
  "DELIVERY_STATUS",
  "USER_ID",
  "CUSTOMER_ID",
  "SITE_ID"
  from "ORDERS" 
   

  I can get this working by selecting the Standard report column in the type of the column header . However this to say that I can't use the LOV LOV options involve removing the HTML characters.
  
  Is there a way I can conditionally change the font with the above query and use LOV as well? Thank you.
  
  Environment
  
  Apex 4.1.1 to apex.oracle.com
  Theme 13
  
  Published by: taepodong on June 3, 2012 07:28

  I'm sure that not looking the application form first before posting this question.

  Your solution would be:
  Please edit your report column under > report attributes > and select the property view as as a Standard report column

• Change the properties of a cluster element inside an array of clusters

  Hi all

  I have a table of cluster that has the shape of a line with different elements of the screen.

  A list or a tree would not have made it, so I had to use a cluster and make a.

  The problem is I want to change not only the text but also the color of the text.

  Individually.

  I found this:

  http://www.NI.com/example/30904/en/

  But it changes the property in all groups in the table, not just the one I need.

  Some people have the same problem:

  http://forums.NI.com/T5/LabVIEW/reference-to-array-of-clusters-with-an-array-element/TD-p/1006427

  http://forums.NI.com/T5/LabVIEW/different-set-of-values-for-two-rings-in-an-array-of-clusters/m-p/10...

  http://forums.NI.com/T5/LabVIEW/array-of-clusters-get-references-to-all-the-clusters/TD-p/1079456

  http://forums.NI.com/T5/LabVIEW/how-can-I-reference-the-properties-of-a-control-in-a-cluster-in/m-p/...

  http://forums.NI.com/T5/LabVIEW/writing-only-to-certain-cluster-elements-in-an-array-by/m-p/2200728

  http://forums.NI.com/T5/LabVIEW/update-properties-of-one-control-in-an-array/m-p/3015501

  http://forums.NI.com/T5/LabVIEW/array-of-clusters-and-in-the-cluster-is-a-bar-meter-how-can-I/m-p/15...

  http://forums.NI.com/T5/LabVIEW/property-node-of-a-control-inside-of-cluster-inside-an-array/m-p/946...

  Obviously, even if in a table/list or a tree, you can change the property of an individual

  cells (font, color), you can't do it in a cluster network, by a kind of magic.

  the property of an element of the cluster (font, color) are all connected together, so made

  the use of a table without value.

  A possible hack is available using masking of control, a visible setting and the

  other invisble, exchanging their position, whatever. This is a hack you have to perform,

  Therefore, add another code to maintain.

  Is that still the case, or is it now a more formal way to manage the individual cluster

  Properties, not only its data? After all it is a common example of a real life which should

  managed by Labview. In my opinion.

  David Koch

  Altenbach says:

  One of the elements could be an indicator of 2D about the same size image. You can create text in any color using the features of the image.

  Here's what I had in mind. Seems to work very well (I would refine the border picture fonts, etc., but this should help you get started).

  

• change the property of element in array for 'initialized '.

  I'm a newcomer here. And it's a simple question.

  The objective of this part is to record the data in the table.

  

  You can see that if the array element is not initialized, it will be not recorded in the worksheet, which saves space in the disk. So change the property 'initialized' of this feedback to unitialized array element?

  Thank you

  You can "right click on the item of data operations remove the element.

  (This has nothing to do with "uninitialized". The size of the array is indicated by the light elements, the dull items fall outside the valid range, which has nothing to do with the size of the container. Your first table has two components and that your second table has three elements).

• How to change the size of fonts Windows 7.

  Original title: HP 300 series

  How can I change the font size in my 300 HP. Text is so small, that I have a hard time reading?

  Hello

  Thanks for posting your query on the Microsoft Community.

  According to the description, I understand that you want to change the font size.

  I suggest to try the steps in the Microsoft Help Articles below and check if that helps.

  http://Windows.Microsoft.com/en-us/Windows/change-Windows-fonts#1TC=Windows-7

  http://Windows.Microsoft.com/en-us/Windows7/make-the-text-on-your-screen-larger-or-smaller?v=t

   

  You may consult:

  http://Windows.Microsoft.com/en-us/Windows7/change-your-font-settings

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• How to stop the dsplay to change resolution size and icon when locking the PC with WIN + L?

  I have a problem with the 4-5 computers in our field.

  They are all randomly change resolution of 1920 x 1080 at 1024 x 768.

  Especially when locking computer wilt WIN + L to lunch for example.

  At the same time it changes the size of the icons.

  I've updated all the NVidia display driver.

  It's a Dell T3500 workstation happens on.

  We use Windows 7 Professional 32 bit Danish version

  IO have sought help on the internet, but not yet come to any usable solution.

  All suggestions will be useful.

  Hello Svend,

  Thanks for posting your query in Microsoft Community Forum.

  These computers are connected to the domain network, the question you posted would be better suited in the TechNet Forums.

  I would recommend posting your query in the TechNet Forums:

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Thank you.

• Change the font color in a report using SQL for APEX 5.0 queries

  Hello

  I'm testing APEX 5.0 in my test environment to see if I can migrate my internal applications of 4.2 to 5.0.

  How can I change the font color in a field based the SQL query? I know how to do it in 4.2, but I can't find the same in 5.0.

  Thank you

  Well, I used to put html tags in the select text, getting the value of depending on the CASE, so I had to change the display column attribute in the report as "Display in text form (space special characters...)".

  I found an old post here: https://tylermuth.wordpress.com/2007/12/01/conditional-column-formatting-in-apex/ and this method still worked for me in APEX 5.0

  Thanks anyway

• Change the width of the content of inputListOfValues inside the af: query

  Hello

  I am looking for a possibility to change the width of the content inside my af:query.

  For example, I have in my fields of application 2 (width 100) and an inputListOfValues (width depends on the width of the content max)

  I want to display them with the same size.

  I put all 3 columns the same width, but af:query always display the current max inputListOfValues width content.

  Is it possible to achieve that?

  I found the solution

  http://www.jobinesh.com/2011/01/customizing-component-display-by.html

  but it does not work for inputListOfValues, only for text input fields. Maybe some css, but how to add css inside the af: query?

  I use jdev 11.1.2.4

  Hello
  AFAIK width for inputListOfValues inside the af: query depends on the size of the field in the database.
  But we can change the with inputListOfValues inside af: query. This is the easiest way to do it:

  1. go into your view object - > attributes

  2. click on the attribute for which you have the LOV. Click on edit to change this attribute.

  3. click on control flags on the left panel. Change view width.

  4 apply, Ok, save & enjoy

  See an example screenshot. We are allowed to change other fields too. This should work for 11g R1 and 11g R2. Please share if you find another way. Hopefully this will solve your problem.

  Thank you
  GT

• change the column size for the number

  Hello

  I created a table with a primary key declared under the (default specification) NUMBER column.

  Create table T

  (

  Number of key primary col1,.

  col2 varchar2 (10)

  );

  Then, I filled this table using the sequence. Now, I want to change the size of the primary key to the number (15) column.

  Is this possible without emptying the primary key column?

  You can't reduce the length of a column that has already given. But you can work around it like that.

  SQL> create table t  2  (  3  col1 number primary key,  4  col2 varchar2(10)  5  );
  Table created.
  SQL> insert into t  2  select level, 'a'  3    from dual  4  connect by level <= 10;
  10 rows created.
  SQL> desc t Name          Null?    Type -------------- -------- ------------------------------ COL1          NOT NULL NUMBER COL2                    VARCHAR2(10)
  SQL> select * from t;
        COL1 COL2---------- ----------        1 a        2 a        3 a        4 a        5 a        6 a        7 a        8 a        9 a        10 a
  10 rows selected.
  SQL> alter table t modify col1 number(15);alter table t modify col1 number(15)                    *ERROR at line 1:ORA-01440: column to be modified must be empty to decrease precision or scale
  
  SQL> alter table t add col_temp number(15);
  Table altered.
  SQL> update t set col_temp = col1;
  10 rows updated.
  SQL> commit;
  Commit complete.
  SQL> alter table t drop column col1;
  Table altered.
  SQL> alter table t rename column col_temp to col1;
  Table altered.
  SQL> alter table t add constraint t_pk primary key (col1);
  Table altered.
  SQL> desc t Name            Null?    Type --------------- -------- ------------------------------ COL2                    VARCHAR2(10) COL1            NOT NULL NUMBER(15)
  SQL> select * from t;
  COL2            COL1---------- ----------a                  1a                  2a                  3a                  4a                  5a                  6a                  7a                  8a                  9a                  10
  10 rows selected.
  SQL>
  

• Bug: APEX_COLLECTION. CREATE_COLLECTION_FROM_QUERY_B change the query string

  Hi APEX Dev Team.
  
  I found a bug (or I don't know how to get around unexpected behavior) in APEX_COLLECTION. CREATE_COLLECTION_FROM_QUERY_B. I think that it also applies to the CREATE_COLLECTION_FROM_QUERY.
  
  What's happening: some strings are replaced in the query, I pass into the function. for example '22% ' is replaced by a white. It is not good if I have a query like this:

  SELECT MYCOLA, MYCOLB, MYCOLC FROM MYTABLEA WHERE MYPHONE LIKE '%22306%';

  This returns no rows in the collection. If I run this query in SQL Developer she returns 5 rows.
  
  When I change the declaration subsequently, it returns 5 rows in the collection.

  SELECT MYCOLA, MYCOLB, MYCOLC FROM MYTABLEA WHERE MYPHONE LIKE '%2306%';

  Trace shows me, the first SELECT statement is replaced by

  SELECT MYCOLA, MYCOLB, MYCOLC FROM MYTABLEA WHERE MYPHONE LIKE ' 306%';

  Which is obviously false :-)
  
  The changes seem to be limited to 22%, I found no other characters encoding URLS that are replaced in the query.
  
  Please fix, as I can't find any workaround.
  
  Thank you
  Peter
  
  -----
  Blog: http://www.oracle-and-apex.com
  ApexLib: http://apexlib.oracleapex.info
  BuilderPlugin: http://builderplugin.oracleapex.info
  Work: http://www.click-click.at

  Hi Peter,.

  Thanks for reporting this. This seems to be a legacy logic which is no longer necessary (the logic to replace the string '22% '). I corrected it to Application Express 4.1.

  To work around the problem, you can concatenate this string in your application, allowing you to avoid this logic. For example,.

  SELECT MYCOLA, MYCOLB, MYCOLC FROM MYTABLEA WHERE MYPHONE LIKE '%2 '. 2306 ' %';

  Thanks again.

  Joel