change the space between different paragraphs. but not between para even. Tags

Similar Questions

• How to change the space between folder icon and the text on the personal toolbar?

  I have some files in the personal toolbar with just a letter to indicate what they are, but on the theme that I use, the letter is too far from the record, it belongs to and partially falls under following folder icon. I don't want to increase the space between all the icons to show the full letter, as this decreases the amount of icons that you can have in the toolbar. Instead, I want to reduce the space between the file and the text belonging to him, so he is right next to him instead of 5 pixels away.

  I found various entries to change the padding and margins in userChrome.css, but it's always around the icon, I don't know where to look to close the space between the icon and the corresponding text.

  Any help would be greatly appreciated, thank you.

  Did you check the value of the left margin of the text?

  You can set if necessary negative margin values.

  #PlacesToolbarItems .toolbarbutton-text { margin-left: -2px !important; }

  Add .bookmark-item [container] If this enough for the items in the folder

  #PlacesToolbarItems .bookmark-item[container] .toolbarbutton-text { margin-left: -2px !important; }

• How to create a paragraph style that I can change the space between the paragraphs of return?

  

  Yes, and you can see the additional empty paragraphs. You must use find/replace to delete (there is an application integrated in the drop-down list in the dialog box).

  If you need space between, you'll need to have styles of paragraph two, one for the name of the company and one for the address info and hours. Apply space before the name or space after the address.

• PE4. Change the type of extension/location, but not the mounting clip

  Hello and Hello to all once again.

  Here is a basic overview of what I've done and what I * want * to be able to do next.

  I have a piece of relatively low quality of the music which I have added to a track on the timeline.  It's over long 6mins and I used keyframes (?) throughout the track to reduce the volume of every time that the Narrator speaks, (another track on the timeline) and then lift the piece of music volume back up again when he doesn't speak. Do this and make the spot - we took some time to considerabnle.

  Guess what?  I have now received a much better quality of audio in exactly the same way.

  So my question, if you please - how to change the destination of track timeline music... ?
  It is a diffiuclt little to explain... I just want to change the source of a piece of music, so instead of a horrible dusty mp3 version, I mean PE4 use .wav place - without remove the track on the timeline and lose all my audio keyframes.

  Is it possible to select the audio track on the timeline or project, then right-click and selecting Properties and then change the location of the files... ?

  I don't know if that makes sense!  Is this possible?

  Thanks for your great help!

  Pete Kingwell

  Peter,

  Put your music on another Audio track. RT-click the keyframes, and then select copy. Then Rt click on the again and choose Paste attributes. This assumes that you have used the keyframes of the elements. If you used track keyframes in the original, you would simply replace your original with the new Clip, as track keyframes would remain. Track keyframes are added in the Audio Mixer Panel.

  Good luck

  Hunt

  [Edit] Once completed, just delete it or mute the original version.

• How can I change the spacing between icons in the taskbar?

  I have a small screen laptop.  Because I want a decent number of programs in my taskbar for easy access, I chose the small icons and no names, etc.  However, the icons of small programs (when not in use) are spaced so far that there is little room to spare.  New programs quickly cause Group and are difficult to manage.

  Why is Microsoft put so much empty space between the small icons unopened?  It's wasted space.

  More important still, how to shrink the space between icons?  On Vista and XP, you could drag the icons to manage your space.  How do I do this with Windows 7?

  Thank you!

  Just after I posted that space is really needed, I found the answer who asked the original question.

  You can change the space between icons (really the size of the buttons) by changing the size of "Buttons" in the window color and appearance. The default on my version of Windows (2008 R2) was 18 years old. When I set it down to the size buttons for the GET pinned icons smaller and thus the icons closer together.

  I don't know if the path is the same in Win7, but in 2008 R2, you right-click on the desktop and select Personalize. Then click on the color button of the window (at the bottom of the window). The dialog box that appears should be titled 'window color and appearance '. In the drop-down list item, select the caption buttons and adjust the size to change the distance between the icons.

  I've only tried a couple of sizes too so setting can cause problems. Once you apply, you will need to right click on the desktop and do a Refresh or even logoff and back on again.

• Remove the space between the items in list box

  Hello

  I have a list box, I need to change the space between each item in the drop-down list.

  (ex)

  test

  Test1

  test2

  I need it to change the space between the test and vice versa test1.

  Kind regards

  Roman papail

  You must specify the list control rowHeight for example

  If this post answers your question or assistance, please mark it as such.

• Unformattable Indesign text - how to remove the spaces between paragraphs?

  I have a 95 page indesign document. I have a few unwanted spaces between paragraphs. I could not get rid of these spaces. I tried to replace the formatting, using the window styles to paragraph, but in this case indesign does not yet recognize the formatting. I put paragraphs in form to 0P0 before and after paragraphs, and yet space remains between some paragraphs. I'm going crazy!

  The problem lies in the text imported into strange formatt, but that was five years ago and I don't even have access to the original text to try to import once more. Perhaps because it is a document to Indesign c5 and c6 now I use?

  Any help appreciated with gratitude,

  Sam

  After checking the object applied to blocks of text style: text frame JWK it shows under text frame General Options/Vertical Justification/Align/Justify (Peter Spier mentioned above about this possibility). I would put this Align/Top. Also when you changed the paragraph to align on the grid he left some gaps on some pages. I have put that back in would line up on the starting grid. There will be a reshuffle of the text when you do. To check if everything looks as it should. Make a copy of the file and make your changes there just in case, and let us know how it goes.

• How can I change the color of the spaces between the buttons of menu

  Hello

  I have problems by changing the color of the spaces between the menu buttons.

  The spaces between the color buttons lighter must be the same color as the buttons.

  Please note that some buttons are voluntarily lighter, some are darker.

  

  Help would be greatly appreciated.

  Thank you.

  Dmitry

  Select the Menu container. Open the control panel of the spacing. The horizontal gutter value 0.

  You can always add padding for menu items to create extra space.

  David

  Creative muse

• Piano roll Editor: is it possible to eliminate the spaces between the many notes at once?

  Using the step input method, I entered a number of 1/2 notes in the piano roll Editor.

  

  Then I selected all my notes and decided to shorten all 1/4 notes after realizing that the pace was too slow.

  

  The problem is that I now have many empty spaces between the notes of 1/4:

  Is it possible to eliminate all the spaces between the notes at once with all selected notes notes?

  Or I have to manually move each 1/4 at the end of the previous note footnote 1/4.

  I think there must be a quicker way to do this.

  Select all under the Edition of the piano roll Editor menu or command button has

  Then enter the end of a single note and all selected notes will also expand.

• Windows Server 2012 does not seem to recognize the space between the program and files

  I installed 'R' in D:\Program Files.
  Then I need to install another application that must refer to this path and validate during its installation. Installation of the next application saying that there is a "Invalid Version of R.

  If I install R in the following directories, it is recognized and my next application installed successfully:
  C:\Program Files
  Files S:\Program
  D:\R

  Windows Server is not recognize the R application properly installed in "D:\Program Files." Windows runs into the space between "Program" and "Files" and put an end to the execution of this order.

  The application I am trying to install the message 'Invalid Version of R' returns because he can't run the command check correctly. Because nothing is returned from the R.exe, he is unable to continue. This issue seems to be related to Windows and once R.exe can be run correctly D:\Program files, I would expect demand to continue to install. Is anyway getting D:\Program Files to be recognized as the other 3 directories I mentioned?

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• How to change the background color of the code written DW page but not the Web page...

  How to change the background color of the code written DW page but not the Web page...

  If you have DWCC2015, you can change to edit > Preferences > coloring Code and either choose a new theme (RecoGnEyes is the background dark code by default) or you can change it to what you want in the background field by default.

  2014 CC had no theme options, but you can change the background color in the same place.

  I think that some of the previous versions also had the option, but I don't have them on my machine to check.

• Insulate the space between the 2 sentences under a strict scenerio for GREP

  Hello!!

  OK, I worked on creating this style sheet for descriptions of catalogue (with the help of many of you), which consist of GREP to find and change, GREP Styles, and Nested styles.

  Everything goes well... but, in the image below, once in a blue moon, I have 2 sentence in a row (which casts my motive for nested Style)... If you look at the call letter F there is sentence 2, and the space between them is one of the most followed by the character styles that passes through the nested styles. This is the only time where my changes of model, is when there are 2 sentence 1 appeal letter.

  

  So, I came with a GREP find and change your mind, see below, who would find the space between these 2 words (one sentence following a call letter) and a sentence that does not begin with a letter of appeal. I want to isolate this space and apply a character with 0 follow-up style

  I tried to isolate the space and put a 0 follow-up character style, but what I came with is also changing the follow-up after the call to this first sentacene letter. So not to go. Here's what I have so far.

  

  None of my friends GREP out there have a better way to isolate this space, only in this case and apply the character style without applying this style of character with the rest of the sentence. It is important to only replace the space, because even the registry and brands followed single amounts charged before them.

  My best attempt was to create a subexpression to find the first sentence by finding a call letter, followed by a period and a space and then any character, one or more until he hit a period. (using the shortest match), then isolate the 1 space to a subexpression so I could get it back, then look at a sentence that did NOT start a call letter, a period and a space. But, as I said, now they all get 0 track, so I get not only the space, but I'm all in these 2 sentences?

  Any thoughts there?

  In my view, I'm so close! It's the last thing that I need to understand and then he will be...

  Thank you

  Babs

  iBabs2 wrote:

  So I think what I need to understand, how to apply a GREP style to just space before a letter of appeal, the space after the period of the letter of appeal.

  Will be all your letters of appeal caught with a "\u" GREP match? If so, use this

  \s(?=\u\.\s)

  to find the space 'before' and

  (?<>

  for space 'after '. (You cannot include a space before in this one, because it might be the beginning of a paragraph.)

• Why can't I change the content at different breakpoints?

  For some reason, after the establishment of breakpoints on my master, whenever I try to change the content at different points of rupture on my subsequent pages, if I click on a breakpoint I can get to this provision of breakpoint, but the cursor turns into a pen and a circle with a line through it and says 'Click here to directly access the breakpoint'.  If I click once again, I need to come back on the breakpoint (1200px) original on as I was.  Can someone tell me why I can't edit content on other breakpoints?

  You cannot change the content between breakpoints.

  If you want a breakpoint of master page to be accessible on a layout page (which is not make sense in many cases), click the small arrows, who are appearing in the breakpoint bar, which represents your breakpoints in the master page, and then click the 'create a new breakpoint' that appear :

  

• Output file spooling keep the space between the columns

  DB version: 11.2.0.3 running Linux OS.

  I ran the following:

  SQL > spool test.txt1

  SQL > @test.sql

  SQL > spool off;

  SQL > exit

  in the test.sql file:

  SET LINESIZE 500

  SET PAGESIZE 500

  SET FEEDBACK OFF

  SET ECHO OFF

  SET TRIMOUT ON

  TERMOUT OFF SET

  NEWPAGE SET TO NONE

  COLUMN DAY FORMAT A9 HEADING 'DAY '.

  COLUMN FORMAT A4 HEADING '00 00.

  A4 01 FORMAT COLUMN TITLED '01 '.

  COLUMN 02 FORMAT A4 HEADING "02".

  COLUMN 03 FORMAT A4 HEADING "03".

  04 '04' SECTION A4 FORMAT COLUMN

  COLUMN 05 FORMAT A4 HEADING "05".

  COLUMN 06 FORMAT A4 HEADING "06."

  COLUMN 07 FORMAT A4 HEADING "07".

  COLUMN FORMAT A4 HEADING '08' 08

  COLUMN FORMAT A4 '09' SECTION 09

  COLUMN 10 FORMAT A4 HEADING "10".

  COLUMN 11 FORMAT A4 HEADING "11".

  COLUMN 12 FORMAT A4 HEADING '12.

  COLUMN 13 FORMAT A4 HEADING "13."

  COLUMN 14 FORMAT A4 HEADING "14".

  COLUMN 15 FORMAT A4 HEADING "15".

  COLUMN 16 FORMAT A4 HEADING "16".

  COLUMN 17 FORMAT A4 HEADING '17.

  COLUMN 18 FORMAT A4 HEADING '18 '.

  COLUMN 19 FORMAT A4 HEADING "19."

  COLUMN 20 FORMAT A4 HEADING "20".

  COLUMN 21 FORMAT A4 HEADING "21".

  COLUMN 22 FORMAT A4 HEADING '22 '.

  COLUMN 23 FORMAT A4 HEADING "23".

  COLUMN 'TOT' FORM 99999 TITLE 'TOTAL '.

  SELECT

  TO_CHAR(COMPLETION_TIME,'YY-MM-DD') DAY,

  TO_CHAR (SUM (DECODE (SUBSTR (TO_CHAR (COMPLETION_TIME, 'HH24'), 1, 2), '00', 1, 0)),'999 ') "00."

  TO_CHAR (SUM (DECODE (SUBSTR (TO_CHAR (COMPLETION_TIME, 'HH24'), 1, 2), '01', 1, 0)),'999 ') "01."

  TO_CHAR (SUM (DECODE (SUBSTR (TO_CHAR (COMPLETION_TIME, 'HH24'), 1, 2), '02', 1, 0)),'999 ') '02. "

  TO_CHAR (SUM (DECODE (SUBSTR (TO_CHAR (COMPLETION_TIME, 'HH24'), 1, 2), '03', 1, 0)),'999 ') '03. "

  TO_CHAR (SUM (DECODE (SUBSTR (TO_CHAR (COMPLETION_TIME, 'HH24'), 1, 2), '04', 1, 0)),'999 ') '04. "

  TO_CHAR (SUM (DECODE (SUBSTR (TO_CHAR (COMPLETION_TIME, 'HH24'), 1, 2), '05', 1, 0)),'999 ') '05. "

  TO_CHAR (SUM (DECODE (SUBSTR (TO_CHAR (COMPLETION_TIME, 'HH24'), 1, 2), '06', 1, 0)),'999 ') '06. "

  TO_CHAR (SUM (DECODE (SUBSTR (TO_CHAR (COMPLETION_TIME, 'HH24'), 1, 2), '07', 1, 0)),'999 ') '07. "

  TO_CHAR (SUM (DECODE (SUBSTR (TO_CHAR (COMPLETION_TIME, 'HH24'), 1, 2), '08', 1, 0)),'999 ') '08. "

  TO_CHAR (SUM (DECODE (SUBSTR (TO_CHAR (COMPLETION_TIME, 'HH24'), 1, 2), '09', 1, 0)),'999 ') '09. "

  TO_CHAR (SUM (DECODE (SUBSTR (TO_CHAR (COMPLETION_TIME, 'HH24'), 1, 2), '10', 1, 0)),'999 ') "10."

  TO_CHAR (SUM (DECODE (SUBSTR (TO_CHAR (COMPLETION_TIME, 'HH24'), 1, 2), '11', 1, 0)),'999 ') "11."

  TO_CHAR (SUM (DECODE (SUBSTR (TO_CHAR (COMPLETION_TIME, 'HH24'), 1, 2), '12', 1, 0)),'999 ') "12."

  TO_CHAR (SUM (DECODE (SUBSTR (TO_CHAR (COMPLETION_TIME, 'HH24'), 1, 2), '13', 1, 0)),'999 ') "13."

  TO_CHAR (SUM (DECODE (SUBSTR (TO_CHAR (COMPLETION_TIME, 'HH24'), 1, 2), '14', 1, 0)),'999 ') "14."

  TO_CHAR (SUM (DECODE (SUBSTR (TO_CHAR (COMPLETION_TIME, 'HH24'), 1, 2), '15', 1, 0)),'999 ') "15."

  TO_CHAR (SUM (DECODE (SUBSTR (TO_CHAR (COMPLETION_TIME, 'HH24'), 1, 2), '16', 1, 0)),'999 ') "16."

  TO_CHAR (SUM (DECODE (SUBSTR (TO_CHAR (COMPLETION_TIME, 'HH24'), 1, 2), '17', 1, 0)),'999 ') "17."

  TO_CHAR (SUM (DECODE (SUBSTR (TO_CHAR (COMPLETION_TIME, 'HH24'), 1, 2), '18', 1, 0)),'999 ') "18."

  TO_CHAR (SUM (DECODE (SUBSTR (TO_CHAR (COMPLETION_TIME, 'HH24'), 1, 2), '19', 1, 0)),'999 ') "19."

  TO_CHAR (SUM (DECODE (SUBSTR (TO_CHAR (COMPLETION_TIME, 'HH24'), 1, 2), '20', 1, 0)),'999 ') "20."

  TO_CHAR (SUM (DECODE (SUBSTR (TO_CHAR (COMPLETION_TIME, 'HH24'), 1, 2), '21', 1, 0)),'999 ') "21."

  TO_CHAR (SUM (DECODE (SUBSTR (TO_CHAR (COMPLETION_TIME, 'HH24'), 1, 2), '22', 1, 0)),'999 ') '22 ',.

  TO_CHAR (SUM (DECODE (SUBSTR (TO_CHAR (COMPLETION_TIME, 'HH24'), 1, 2), '23', 1, 0)),'999 ') "23."

  COUNT (1) "TOT".

  V $ ARCHIVED_LOG

  WHEN ARCHIVED = 'YES '.

  AND TRUNC(SYSDATE-COMPLETION_TIME) < 7

  GROUP OF TO_CHAR (COMPLETION_TIME, "AA-MM-DD")

  ORDER BY TO_DATE (DATE, 'AA-MM-DD');

  When I CAT the file in Linux (there the space between each aligned format and columns)

  When I send emails (even when I copy here), it looks like in below

  SQL > @test.sql

  TOTAL DAYS 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23

  --------- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ------

  14/08/18 0 0 0 0 8 8 8 11 11 13 12 18 19 22 21 21 20 20 19 20 9 9 9 9 287

  14/08/19 12 9 17 7 7 7 7 8 10 9 6 12 10 20 4 11 11 10 25 17 18 18 18 16 289

  14/08/20 11 11 18 7 10 8 9 9 9 9 9 14 13 19 16 16 20 19 21 20 20 12 11 7 318

  14/08/21 5 20 19 10 8 8 8 11 9 9 11 12 19 12 12 12 18 4 7 25 19 16 16 17 307

  14/08/22 13 11 20 8 10 7 9 10 11 13 11 13 25 15 16 15 18 19 21 19 26 20 13 10 353

  14/08/23 10 8 21 10 9 10 9 7 9 8 7 9 12 8 7 5 10 7 7 9 8 15 14 8 227

  14/08/24 4 10 25 11 9 6 8 7 7 7 6 8 12 7 5 7 6 6 5 7 6 7 12 6 194

  14/08/25 8 7 25 8 2 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 50

  SQL > spool off;

  I need the output should be like tabluar format. Please notify

  > But when I send the results by email his watch is not as expected.

  It is because your email client, interprets and formats the text.

  You've seen this interpreter notebook and it is shaped differently.

  He must know what font is used for the text.  Courier and monospaced fonts generally spaces correctly.

  Hemant K Collette

• Recalculate the space between objects on a fly in slide show...

  Hi all.. I hope someone can help me with this - and thanks in advance!

  I work with a slide show which products of different widths. The idea is to ensure that when the user clickes on the next/back buttons and the next (or previous) product arises - to ensure that the product is not cut either on left of the stage (or live area) or to the right...

  The only way I can think is that flash must recalculate the space between products according to which products are currently displayed... This is the part of the code where I'm sure that this calculation must happen ("back" button has basically same code):

  where itemSpace is that space is the space between the product and the and the product_mc is a product... all products are called through XML... If someone could put the right direction here - I would REALLY appreciate it...

  _root.button_next.onRelease = function() {}
  trace ("onRelease button_next");
  If (_root.totalImages - > 5 currentIndex)
  {
  _root.xTargetMC +=-1 * (_root..) Product_mc._width MC ['coffee_maker' + currentIndex] * 2 + _root.itemSpace);
  If (currentIndex > 0)
  _root.xTargetMC += 1 * firstPosX;
  
  currentIndex += 1;
  If (currentIndex > 0)
  {
  _root.button_back._visible = true;
  }
  
  If (currentIndex == _root.totalImages - 5)
  {
  _root.button_next._visible = false;
  }
  }
  }

  I see no easy way to fix this code.  the spacing is assigned elsewhere and does not change when you change the currentIndex.  that will have to be changed which will change how your application works.

  What will probably work best is to eliminate this movieclip MC master that contains the objects seen on stage and tween each of 5 objects on stage (5 pre-teens).  This will require removing all the interpolation code you currently have and creating new code.