Why I can't update windows and fail. and the error is 0x8007001F

Similar Questions

• Last 6 updates Windows have failed; get the error message 8E5E0147

  I had a successful Windows since 4.22.13 update. I tried to manually run these updates, but still get error message 8E5E0147. I have not updated the following text:

  KB2820197 - s updated for the stop bit ActiveX

  KB2829530 - s updated for Windows 7

  KB2830290 - s updated for Windows 7

  KB2813956 - update for Windows 7

  KB2820331 - update for Windows 7

  Another IE 10, I did not and would not run anyway.

  I don't know what means the error message 8E5E0147. Help, please!

  You can reset the Windows Update components by running the Fixit on this page. But if there is malware present, she will continue to reset the connection to the update servers:

  How to reset the Windows Update components

  http://support.Microsoft.com/kb/971058

  Suggest you download and save the Fixit. Then configure the system before the clean boot by running:

  How to troubleshoot a problem by performing a clean boot in Windows Vista/Windows 7

  http://support.Microsoft.com/kb/929135

  Once the Fixit has been downloaded and the system is started in the pure State, check that the native Windows Firewall is now on if a 3rd party firewall has been used previously. Now run the Fixit and choose the default mode. Restart once it's done and see if the system can be connected to the update servers. If he can't, then rerun the Fixit and choose aggressive mode. Turn it back on when he finished the race and updates.

  I suggest before you stop and install the updates, disconnect from the Internet, first.

• I can't update KB970710 and get error 8007002.

  I can't update KB970710 and get error 8007002.  This is an important update.  I went to the Microsoft web page, and it explains how to download the update in safe mode.  In safe mode I can't have in the center of update by using the Start button and pressing the update of windows.  The funny thing about all this is that the update does not load because of my virus program which is essential to MICROSOFT security.  Please help me.  I fear that my computer may be at risk because I was not able to download from 17/06/11, since it was released.

  Hi Jan31158,

  Follow these steps:

  Method 1:

  Follow the steps in the following article troubleshooting to solve the problem:

  Windows Update Error 80070002

  Method 2:

  Download and save the Setup on your desktop package and try to install the same.

  Download the update from the link below:

  Update security for Windows Vista (KB970710)

• My update InDesign keeps failing. The error that is displayed is (U44M1P7)

  My update InDesign keeps failing. The error that is displayed is (U44M1P7)

  Failed installation. Error U44M1P7 | Updates

  Mylenium

• Update Windows again me that there are 11 important to install updates. It fails with the error 80070490, Code and Code 80073712.

  Original title: update Windows problem on Vista 64-bit

  My Windows Update repeat me that there are 11 important to install updates. It fails whenever I have try running with 80070490, Code and Code 80073712 error.

  I tried the Windows analysis tool, the difficulty it tool Microsoft and the web site Microsoft Fix It I have have also run a registry cleaner and that he would follow the instructions of Microsoft to solve the problem of Windows Update by editing the registry, but I get 'Access denied' when ordering fast, even though I checked all permissions.

  The updates are:

  Update for Windows Vista for x 64-based systems (KB972145)
  Update for Windows Vista for x 64-based systems (KB2633952)
  Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Vista SP2 and Windows Server 2008 SP2 for x 64 (KB2572075)
  Update security for Windows Vista for x 64-based systems (KB2564958)
  Update for Windows Vista for x 64-based systems (KB970430)
  Update security for Windows Vista for x 64-based systems (KB2378111)
  Windows PowerShell 2.0 and WinRM 2.0 for Windows Vista for x 64-based systems (KB968930)
  Update for Windows Vista for x 64-based systems (KB2345886)
  Update security for Windows Vista for x 64-based systems (KB967723)
  A security update for .NET Framework 3.5 SP1, Windows Vista SP2 and Windows Server 2008 SP2 for x 64 systems (KB2518866)
  Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Vista SP2 and Windows Server 2008 SP2 for x 64 (KB2633874)

  I realize that these are not critical updates, but am concerned that, if there is a problem with the update, it will not refresh the critical updates either.

  Any help would be greatly appreciated. Thank you.

  Etherlass

  Hello again,

  Thought I would let you know that I've finally sorted this! :)

  In another forum I read a post from someone who had a similar problem and solved it by uninstalling the "failures" updated, restart the PC and then re-run the update. It worked! It had not occurred to me to try what I've assumed that 'impossible' meant that they had not installed at all, not that they didn't had simply not installed correctly and must have become corrupt.

  I hope this will help someone else who has the same problem, I've had!

  Best wishes

  Etherlass

• Problem message 66 a updated windows and performace error on Windows Vista

  Original title: windows update error

  I have problems to download windows updates.  I bought new spyware, PC unleashed and already have Norton. I tried everything I could think of to fix this.  I changed the settings, cleaned records etc. nothing works.  Considering that I know almost nothing about IT, I'm there winging.  My computer is Windows Vista Home Premium, 32-bit.  It's a gateway bought about 2 years ago.  He sometimes stops for no reason (no blue screen of death again).  I am desperate to solve this problem, but reluctant to take it to a computer repair store.  I tried Microsoft Fix Center several times and tried different repairs but still nothing.  Don't know what happened but suddenly, the computer is slower and updates do not work.

  I'm afraid to do too much fear I may damage my computer or worse.  I received the error 66 has time and time again.  I have received various messages which have failed since April but didn't know it was because my computer was always a small icon of security under the start menu that tells me to stop and install the updates so I could do this after I was using the computer think he was installing updates , but obviously none of them.  Now I can't even count how many updates have not been installed.

  Due to the scans, I have ran, it was said that my computer has high speed, a lot of RAM etc... but I have problems of instability.  It makes me wonder if it's something personal! Laughing out loud

  I would appreciate any assistance available.  Thank you.

  Robin

  Hi Robin,

  Method 1: If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2: Run the fixit available in the link below to reset windows update components.

   

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.
  How to back up and restore the registry in Windows

  Method 3: Follow the steps described in the section below and then check if it makes a difference

  Error code '0x8007066A' when you use the Windows Update Web site or Microsoft Update to install the .net Framework update:
  http://support.Microsoft.com/kb/2507641/

  Method 4: check the logs in Event Viewer for more details on the shutdown problem

  Open event viewer

  What are the information in event logs? (Event Viewer)

• Updates Windows has failed in the past - the system is updated today, I'm good?

  Hello

  I have re-installed Windows 7 last resort because of my PC in place and he has downloaded and installed the updates, he found most. However, there are 3 it has downloaded and cannot be installed, and trying to bring once again, I told myself there is no more and my system is up to date. It updates of Microsoft Malware Removal tool (February 2010) which is shown as important and obviously for reasons of security, I would like to download and have the PC install again.

  How can I view Windows that it's broken and to re-download and install it? Or am I worrying for nothing because I just re-installed everything?

  Thank you

  It is very good. Windows found them and install successfully

• Vista - update security KB982381 fails with the error Code: 80071AA7

  Update Cumulative security for Internet Explorer 8 for Windows Vista still fails to install.  At the beginning I had 6 automatic updates which could not install (usually NOT a problem), so I individually installed each... reboot after each update.  Success on those.  I tried to update KB982381 more than 8 times without success.  I don't use IE as my browser.  My computer is constantly trying to install this and reboot... never works.  Don't know what to do.

  I did everything you suggested in the last email and I am sorry to say that the update has failed once again.   I use Mozilla Firefox as my browser, but I open IE * to run its difficulty etc.  I ran Windows Update (reset) in aggressive mode (what settings it reset?  I noticed when I went to the Control Panel, to look for updates and it listed that it is 'never' updates etc.).  When I did find updates sent to download, it came with one that was a failure and the other for Windows Defender.  This one has installed fine.  Let me know what I should try!  Thank you

• Microsoft Office 2003 updates are installation failed with the error.

  Unable to install the updates of Windows office 2003?

  Original title: Windows update cannot install Office 2003 updates / I have Win XP Professional SP3. I am tired

  Hello

  -What is the error code that you get when you try to install updates?
  -Is the specific question to the updates of Microsoft office?

  Solve common installation issues in Windows Update, Microsoft Update and Windows Server Update Services
  http://support.Microsoft.com/kb/906602
   
  You can also post your question under office forum if the problem is specific to the MS office updates.
  http://answers.Microsoft.com/en-us/Office
   
  
   

• Windows backup fails with the error "the last backup was not entirely successful.

  Original title: baclup fails

  I've repeatedly tried to back up my Win 7 files. I turned off check virus and Internet.  The only message I get back is "the last backup haven't successfully' information plus button just translates to"try again ".

  Hey Joe,

  (a) did you get an error with this error code?

  (b) do you remember to make changes on the computer before the show?

  This could be the shadow copy Volume service, and SPP services are not started.

  To restart the Volume Shadow Copy service and the services of the SPP. You must be logged on as administrator to perform these steps.

  1 open administrative tools by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Administrative Tools.
  2. double-click on Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  3. If the SPP function is disabled, double-click it to open the service properties.
  4. If the Volume Shadow Copy service is double-click on it to open the service properties
  5. click on the startup type list, click Automatic (delayed start), and then click on apply.
  6. under the service status, click Start.

  If the problem persists, follow the steps in troubleshooting section and check if that helps:

  Windows backup or restore 0 x 80070001, 0 x 81000037 or 0 x 80070003 errors

  http://support.Microsoft.com/kb/973455

  Hope this helps, if you need help on windows let us know we will be happy to help you.

• Update NVIDIA VIBS fails with the error "device or resource busy".

  Hi, we have encountered an error where we are unable to obtain the density, we should be able to on our cards Nvidia K1. Specifically, with allocation of 512 MB RAM video for desktop computers, we approach, to no, 64 VM by GPU, we should be able to. I have a box to open with VMware and they suggested that I should update my drivers Nvidia on ESXi host. 304, 76 - running 1OEM.510.0.0.802205 and I found the version 319.65 - 1OEM.510.0.0.802205 on the Nvidia site. If I try to run software esxcli vib install v - NVIDIA - VMware_ESXi_5.1_Host_Driver_319.65 - 1OEM.510.0.0.802205.vib then I get the error:

  [InstallationError]

  Error running /tardisks/NVIDIA_V.v00 rm:

  Return code: 1

  Output: rm: cannot remove ' / tardisks/NVIDIA_V.v00 ': device or resource busy

  If I try to run:

  esxcli software vib remove - vibname = NVIDIA - VMware_ESXi_5.1_Host_Driver

  Then, I get the same error.

  All the VMS are arrested and my host is in maintenance mode. How to uninstall we 304.76 pilot so I can install driver 319.65? Is there a service that I have to stop first or something?

  Here is the complete procedure:

  To update the VIB of NVIDIA GPU, you must uninstall the currently installed VIB and install new VIB, as described above. To uninstall the currently installed VIB:

  1. Stop all VMs using 3D acceleration.
  2. Place the ESXi host in maintenance mode.
  3. Open a prompt on the ESXi host.
  4. Turn off Xserver by running the command:

     /etc/init.d/xorg stop

  5. Remove the NVIDIA VMkernel driver by running the command:

     vmkload_mod -u nvidia

  6. Remove the VIB by running the command:

     esxcli software vib remove -n NVIDIA-VMware

     You can now install a newer NVIDIA GPU VIB.

• I've removed a virus, but cannot update windows now I get the error no. 0 x 80070424.

  I tried the solution of Micrsoft of manually The on updates, but still nothing.

  This is almost certainly due to someone having tampered with the services involved in the WGA process.

  Run the MGADiag tool

  To analyze and solve problems for Activation and Validation, we need to see a full copy of the report produced by the MGADiag (download and save to the desktop - http://go.microsoft.com/fwlink/?linkid=52012 ) tool
  Once saved, run the tool.
  Click on the button continue, which will produce the report.
  To copy the report in your response, click the button copy in the tool (ignore the error at this stage), and then paste (using r-click and paste or Ctrl + V) in your response.

• My Windows update fails to install the important update 3, and the error code is Code 8007045 D. Anyone had this happen, and how can I fix it?

  Code 8007045 that appear when Windows Update fails to install important updates

  Short story: If you do NOT live in one of the zones listed in http://support.microsoft.com/kb/976098, you really don't need to install this update anyway so you can just "hide".

  HOW to hide an update or restore a hidden update
  http://www.SevenForums.com/tutorials/24376-Windows-Update-hide-restore-hidden-updates.html ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I can't update windows service pack. 8007371C error code

  8007371C error code keeps popping up. Please can someone help? Thanks LS

  Hi laurael75,

  Don't the down computer at one time other than when you use the internet? You receive error messages?
  Follow the steps in this document to reset Windows Update components. Alternatively, you can start your computer in a clean boot State in order to eliminate software conflicts that may cause problems to install the updates.

• Card chart-update Windows and the bluetooth works do not HP pavilion dv6

  Dear Sir.

  I've upgraded to Windows 7 Edition home premium to Windows 8 pro. Since then, my AMD radeon HD M 7400 series graphics card does not work. In addition, bluetooth also does not work. Please advise a solution. Thank you

  Can U tell me the exact message you get?

  Well, if you can tell me your system type, I can give you the link for the drivers you need to install on your system.

  Bluetooth: Have you tried pressing the hot key to turn off wireless / bluetooth service? who can install your bluetooth device.

  Concerning

  Shantanu