Change the SSID and WEP key after changing the AP

The Setup is a Linksys BEFSR41 router and a Linksys WAP54G access point.

Initial Setup used by default no WEP and SSID.

No problem connecting to my XPS1330.

Now, I would change the SSID (to distinguish my home network from other networks) and

Adding a WEP KEY.

VISTA will allow me to change the current, marked network to home or should I delete this one and start again?

Thank you

Bill


Tags: Dell Products

Similar Questions

  • Helps connect Router WRT160N and WEP key

    Hello

    I've just intsalled the N wireless router and connected successfully all laptops except the one that runs windows xp professional. I try to go and changed the wep key on top of the PLA to the new assigned by the router and it only allows me to type 23 characters instead of 26. I used WEP encryption locks again one of my work laptop is still running windows 2000 - which I was able to connect successfully.

    How to set network for xp Setup to ask for the 124 wep key?

    Help please!

    Remove all wireless profiles present on the XP laptop...

    Click Start and go to control panel, double-click network connections,
    Right click on wireless network connection and click Properties.
    Now on this window, click on the second tab of wireless network and provide a checkbox "use windows to configure my wireless.
    and delete all the names of network from the preferred networks window. Then click OK...
    Right click on again wireless network connection and click View available wireless networks and try to re - connect to your network.
    Now, it will give you the opportunity to put the network/wep key, make sure that you enter the correct network key and confirm...
    It will connect...

  • CHANGE of SIZE of the BRUSH WITH CTRL and alt KEYS

    Hi all

    I'm on the road with my new macbook, and I have a problem with setting up my wacom pen.

    At home I use an iMac with CS5 and to change the brush size, I press alt and CTRL key and move the pen left/tight up/down to size of chang and hardnes of the brush. I find it very convenient!

    On my new Macbook, I have CC and I don't have the ability to use this easy key combination, I was loking autour and some google, but I have found the place to get the same settings on my macbook.

    Is there anyone who can help me?

    Thank you very much.

    When you hold down Option/Alt + Control and left mouse click and drag anything happens?

    (the button on the pen is set to left click?)

    The Option/Alt key should always be the second key to the left of the SPACEBAR

    The control key must always be the third key to the left of the SPACEBAR

  • WAP54G continues to change SSID and security

    Hi all

    I have problems with my access points. They continue to change SSID and security. Nobody is reseting them. I already changed the password.

    Here is the screenshot of the SSID page:

    http://img276.Imagevenue.com/img.php?image=90322_pearl_lane_access_point_screenshot_122_486lo.jpg

    And here's the screenshot of the Security page:

    http://img175.Imagevenue.com/img.php?image=90743_pearl_lane_access_point_screenshot_2_122_443lo.jpg

    I have to update firmware? All entries?

    I appreciate your help. Thank you very much!

    Yes. You can "press" the button ITS on the web interface to the wireless page.

  • How to find my WEP key and the name of my network?

    I need to reset my wireless printer to scan.  It asks for my WEP key and I thought it was one that is not correct.  How to find the right WEP key and my correct network name? I have a laptop HP Pavilion dm4 with HP scanner/printe wireless

    You must log - on to your AP or wireless router and look for the 'Wireless' or similar tab for your WEP key and the network name (SSID). Or you may be able to locate the information by going to control Panel\All Control Panel Items\Network and Center sharing on your laptop.

    Frank

  • Printer all in one HP3520 - how to select the wireless network and enter the WEP key?

    According to print my wireless network is detected.

    How to connect the! @# % printer $ fo the wireless network and enter the WEP key?

    Instructions on the HP site tell me to selet NETWORK on the printer control panel.  Well, there's a way to select the NETWORK from the control panel.  It is not an option for him.

    I downnloaded and installed the latest drivers.

    I have restored the default settings.

    How to select the wireless network and enter the WEP key?

    All of HP's instructions seem to be for a newer printer with a touchscreen.

    I want that the printer is connected to my main computer via the USB port.  I want to be able to print wireless phones and tablets.

    My 3520 is not a 'touch Screen' and it has wifi.

    However, the following work:

    Try to open the HP Deskjet 3520 icon, open the utilities tab, click on convert USB wireless, by following the steps on the screen.

    This leads me to believe that ONLY the wireless doesn't work.  I know now that the part of the sentence "Convert USB to wireless connection" is supposed to mean "works like USB and wireless.

    Thank you for your help

  • How can I find the name of the network and the WEP key or passphrase WPA from my computer

    I need to install a printer on my laptop, and I wanted to do it by using a wi - fi connection.  But its asking me my network name and the WEP key or the WPA passphrase!  Of course, you can say I'm not very computer savvy and my son actually made me the laptop for Christmas and it was all set up but now I try to install this printer all on my own and I don't know where I can find this info on my computer.  Help!

    Her often on the back or the bottom of your wireless router.

  • mx459 won't let me enter the WEP key number, allows only symbols and letters. How to enter numbers?

    mx459 won't let me enter the WEP key number, allows only symbols or letters. How to enter numbers?

    John

    This might help

    Press the SETUP button on the control panel of your printer.
    Using the arrows, select DEVICE SETTINGS, press OK.
    Select local network SETTINGS, then press OK.
    Select Configuration LAN wireless, and then press OK.
    If a message appears, press the WPS button, press STOP to cancel.
    Select STANDARD INSTALLATION in the next screen that appears, and then press OK.
    Select your access point or router, and then press OK.
    Press OK to confirm the access point name.
    Enter your password using the numeric keypad on the right.
    On the screen where you enter your password at the top right of the LCD screen, you should see a: 1. This indicates you are in digital input mode. If you press the asterisk (*) will be fixed: has or uppercase mode, pressing asterisk with tiny switch. To enter a letter in letter mode, you press the digital key to scroll through the available letters. For example: to enter a letter 'c', you press the '2' three times.
    Press OK when finished.
    The LCD will say "Connected", if the password is correct.

  • After launching the recovery cd, request activation and product key is unfortunate. So how / where can I get the product key

    product key for windows vista

    After launching the recovery cd, request activation and product key is unfortunate. So how / where can I get the product key

    See if this helps:-

    http://support.Microsoft.com/kb/823570

    If she please vote as helpful.

    Thank you.

  • Upgrade vista basic to Windows 7 and keep the WEP key

    Hello. My current setup is windows Vista Basic and I have a WEP key on my pc, but have lost the hard copy. I want to move to W7, but do it by steps by going on Vista buisness then W7. Is there anyway I can make and keep my network settings, because if I lose the WEP key I will be not able to access my Wireless hub and will be with the internet.

    I mean, that is, if I update rather than clean install that it will keep the network and password parameters. Thank you

    Hello. My current setup is windows Vista Basic and I have a WEP key on my pc, but have lost the hard copy. I want to move to W7, but do it by steps by going on Vista buisness then W7. Is there anyway I can make and keep my network settings, because if I lose the WEP key I will be not able to access my Wireless hub and will be with the internet.

    I mean, that is, if I update rather than clean install that it will keep the network and password parameters. Thank you

    Hey Cheese22

    Vista basic to vista Professional is not an upgrade path

    to be done with a clean install using a version of full vista which wipes business the hard drive clean

    I suggest you if you wishdo the foregoing you have set up the network again settings

    and we are prohibited in these forums to help you with forgotten WEP key password

    read the reasons for this at the link below

    http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/3eba3150-8742-4264-be9f-0daaad2282cd

    read windows 7 upgrade paths to the link below

    http://TechNet.Microsoft.com/en-us/library/dd772579 (WS.10) .aspx

    Walter, the time zone traveller

  • Dell Inspiron 531 - summer pc try to restore factory settings and hit the F8 key after close to a dozen times. I never see the advanced options to choose the factory restore. HELP please...

    tried to restore factory settings and hit the F8 key after close to a dozen times.  I never see the advanced options to choose the factory restore.   HELP please...  I'm following indications out of Dell's web site as well.    UGH

    http://support.Dell.com/support/topics/global.aspx/support/DellCare/contact_us?c=us&l=en&s=Gen&redirect=1

    If you have problems with the process of recovery of Dell, contact Dell at the link above.

    It's Dell recovery, not Microsoft software/process of.

    See you soon.

    Mick Murphy - Microsoft partner

  • E4200 access via a browser is low. Password and wireless keys must be the same.

    I tried to change my admin password to something I just want to know. When I did, I was told that the key and wireless admin password must be the same. What madness is this? I have to give my children the key to enter the system there. I put parental controls for device there. Now all owe it do is google this router and read and then they can understand the key and the password are the same. Log in to the router and change parental controls.

    I thought about a work around that. I would give them the key to access as a guest. It was great if they were going to use a browser to surf the Web. Guest access does not work for me on other devices such as iPods and iPads. In my tests on these types of devices applications cannot get on the Internet with guest access. That a browser can.

    Thoughts from cisco? No help from cisco on this?

    Do not use Cisco Connect and you'll be able to have the password admin and "wireless key" be different without problem.  I don't know why Cisco Connect is doing this, but if you go to http://192.168.1.1 with your web browser after using Cisco Connect and you connect to the web GUI admin here, you can manually set your admin password and the "wireless key" However desired.

  • keep the old activation key after installing a new version of windows - no upgrade!

    I bought a new laptop with pre installed Win8. I used a new drive to win 8 teacher with activation key to improve the system.
    I was not satisfied with winning 8 and used a new version of Win 7 prof to install on the laptop.
    After security issues I want to install Win 7 Ultimate with a new available activation key - it so no need to reinstall, its enough to change the activation key.
    All OS - Windows 8 Pro, Win 7 teacher have been activated on the same notebook, what happens with these keys after using a new key for ultimate?
    How can I save my unused keys for later use? There is a lot of money has evolved with these SW!

    I have not found an answer on Microsoft, my being sites I need to call Microsoft technical support by phone.

    Thanks to the community

    I explained as well for you!

    System operating licenses in detail, that you buy and install yourself, is authorized to transfer to another machine.

    But retail licenses also can be installed on a machine at one time.

    If you clean the hard drive and take the operating system/product at retail a key machine, you can reinstall the license of retail on another machine and reactivate.

  • Why do I get an incorrect WEP key during the installation of my printer?

    Product - specific document

    http://support.HP.com/us-en/document/c00772798

    I worked for HP.

    This work also (well) with the J6480 printer.  I was using a Linksys router Wireless 'G' which creates 4 WEP keys, allowing you to choose which use.  I sent #2 key and it would not accept.  The only way I could make it work was to disable wireless security, is not my idea of a good option.  After numerious emails and 1 appeal to support with no ideas that I decided to seek out here and finally managed to do accept the WEP key.  I ended up completely uninstall/reinstall to get everything to work 100%, but now it works like a charm.  For those of you with a similar problem, when using a router that generates more than 1 WEP key, try using (sending) key #1

    HP Note: your support by e-mail/voice should be as good as your online forum support

    Thanks to DaniW-now I'm a happy camper

  • I don't know how i ' v, but I lost the toolbars at the top and bottom. [Alt] will not bring up the toolbar and scroll keys do not work. How can I fix it?

    I managed to hide the toolbars, ALL of them. [Alt] brings to the top of the toolbar so that I can change them. In addition, the [previous page] [next page], [home] and [end] keys do not work.

    You can have:

    1. Choose the Mode "full screen" or
    2. unchecked toolbars

    The F11 key activates / turns off Mode full screen or not. Full screen, you have no toolbars, no tab and no bar Add on (bottom).

    If unchecked you your toolbars (checked = displayed; UN - check = not displayed), and then do one of the following, then click on those you want to check/uncheck:

    If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

    Not related to your question, but...

    You may need to update some plug-ins. Check your plug-ins and update if necessary:

Maybe you are looking for