Change the styles for ebook/print

Similar Questions

• "You are not allowed to change the settings for this printer. If you need to change the settings, contact your system administrator.

  XP Pro, SP3. I downloaded the free Bullzip pdf printer. Somehow my old printer pdf in my printer disappeared list which I have used for years. I get this message when installing - "you are not allowed to change the settings for this printer. If you need to change the settings, contact your system administrator. I click ok and it ends, but it doesn't work. It does not appear in the printer control panel as a printer to change anything.

  I built this computer at home and I'm the only one using it. What is this function 'administrator '? I've never had to administrator on any program. Never. That is what it is?

  CNET is infamous for the grouping of things in its downloads as much a / v programs report as junk (I went through the same thing using eSet NOD32 has / v).  I seem to remember that if you ignore the warning and download the exe file and then use a tool like the free 7-zip to extract only the file necessary to run the program you want, you can work around the problem.

  For a pdf printer free which is not CNET - and works well - go here--> http://www.cutepdf.com/products/cutepdf/writer.asp

  EDIT TO ADD A LINK:

  See, for example, http://forums.cnet.com/7723-12543_102-582307/safe-downloads-cnet-com-sorry-but-not-anymore/

• CSS - how to remove/change the styles for a single image?

  Hello

  In my CSS, I have the following rule which images in the div "main_text" with a border, background color and padding of the styles:

  #main_text img {}
  border: 1px solid #666;
  padding: 5px;
  background-color: #C0BEB6;
  }

  However, I have an image on a page where I want to remove this style and I can't find a way to do it.

  I tried to apply a class to the image I want to change:

  {.exclaim}
  border-style: none;
  float: left;
  margin-right: 10px;
  padding: 0px;
  }

  The rule of .exclaim appears after "img #main_text" in the style sheet.

  The float and the margin that both work, but the border and fill are retained other selector.

  I know that I could just have 2 classes and apply them as needed but finally I'm likely to have images everywhere on the site requiring the border and fill and just one that isn't.

  The site in question is here: http://www.elitejoiners-Shopfitters.co.UK/

  The page that contains the image that has no need of the border is the error page: http://www.elitejoiners-Shopfitters.co.UK/Error404.html

  Thank you

  Mick

  . Exclaim will always be inside the #main_text?

  If so, increase the 'weight' of .exclaim CSS by addressing specifically so that it outweighs #main_text img:

  change

  {.exclaim}
  border-style: none;
  float: left;
  margin-right: 10px;
  padding: 0px;
  }

  TO

  #main_text .exclaim {}
  border-style: none;
  float: left;
  margin-right: 10px;
  padding: 0px;
  }

• Photosmart HP 7520: CHANGE THE configuration FOR MY PRINTER HP 7520 wireless

  When my printer has been set up by my neighbour she has implemented using his MAC wireless network.  She moves and will dismantle its printer and now I wonder if my printer still works or I need to set up wireless myself.  If so, how do that before she moves so my printer does not work?  A computer expert quoted me the sum of $150.00 to do this for me, but I hope I won't have to resort to that.  Thanks for your help.

  Hi @filgrastin and welcome to the Forums!

  I see that you are looking in the wireless options. I would like to help.

  There are two routes, you can opt for printing, if you lose the network, sure it is.

  First of all, if you have your own wireless network, you can connect to:

  The software configuration of the printer to a wireless network for the e-all-in-one printer series HP Photosmart 7520

  Second, you can connect a USB cable and print via a wired connection.

  Please let me know if you have any questions.  Thanks for posting on the HP Forums!

• Try to change the setting for my printer so I can print the project

  my printer is Canon ip4000 and I used to be able to put the printer in draft mode when I tried a test print.  A separate window popped up in the printer settings

  Saving photo paper good if etc. positioning is not correct.

  It was beautiful in 3 elements but having "improved" 8 now cannot find any where that I can do.

  I'm missing something.

  Thank you

  on Snow leopard on MacbookPro 17 "500 GB with 4 GB of Ram

  Right. As I said in my first post, you need to click on the arrow to the right of the name of the printer to decompress. However, the exclamation point next to the name in your screenshot indicates that something is wrong - you have installed the correct driver?

• HP deskjet 4515: changing the settings for print quality

  Hi all

  How can I set the print quality of my printer on my macbook to project quality and black color only

  Welcome to the community of HP, @ahmadzamzam 

  Here is an article for you to see which should help you to change the settings for print quality on your Mac. Please be aware of the ads on the article page and not click on them (or just close them).

  MacLife: How to optimize your print settings

  Good luck

• How can I change the value of a print job in Visio 2003. It is for 1 or 2 pages, I want that he 9 printing pages. Thank you.

  How can I change the value of a print job in Visio 2003.  He is currently configured to print pages 1 and 2, but I want to print all 9 pages at a time.  Thank you

  You can remove 1-2 and type 1-9? All HP and Epson printers I have worked this way.

  That's all I can offer as I'm not familiar with your printer.

• Change the style of the drop-down list for the fill-in-the-white questions

  As the title says, I just want to know how to change the style, or at least font size in the drop-down lists to fill-in-the-blank questions. By default have a tiny font that is difficult to read, and a blocky interface. I can do to fix that?

  Hello

  I'm sorry, but this is not possible at the moment. If you fill a feature request (as I already did) to find out a better way to format these drop-down lists?

  Lilybiri

• PageNumbers: How to change the style of pagenumber?

  Normally, you change the style between letters as VII and numbers like 7 in the "layout" window by clicking on the button for "numbers". But in my iBook version 2.4.1 author is not any button like that. There are only functions for the lines, as you can see:

  

  What ist wrong? Can someone help me?

  Hello

  Try the iBooks author User Guide > https://help.apple.com/ibooksauthor/mac/

• Office jet Pro 8600: how to change the folder for the scans on my Apple?

  Hi, I want to know how to change the destination for my scans folder when I scan from the printer.  Currently, the scans go to "documents", and I want him to be in a business case.  Clues?  I tried to watch some instructions on the previous posts, but it seems that they are for windows.

  Thanks for the help!

  Hi @jgossc,

  I'd be happy to help you change your scan destination. I understand that when you scan your Officejet Pro 8600 to your Mac, the file analysis is currently underway to your documents and want to let them instead to a business case.

  To change the destination please follow the steps below and let me know the results of your efforts:

  • Open HP utility
  • Select Scan to the computer
  • Click Scan tasks to change
  • Choose a shortcut to scan
  • Select Edition
  • In the options listed here, you should see scan destination

  If this resolves the issue, please click Accept as Solution button below; If not, let me know and I will do everything I can to help. Thank you.

• How to change the style of point of the last lot on multiplot XY graph programmatically?

  Hi all

  I have a multiplot XY Chart.  I want to change the style of the last plot point by program.  Any way to do it?  I tried and it looks like only the first property parcel is changeable by program.

  Thanks for any help.

  Anne

  ergwser wrote:

  Hi all

  I have a multiplot XY Chart.  I want to change the style of the last plot point by program.  Any way to do it?  I tried and it looks like only the first property parcel is changeable by program.

  Thanks for any help.

  Anne

  Nodes property can be resized by dragging down on them.

  resize the property node you re using and use a "Conspiracy Active" property to set the index of the plot of the plot you wan to act on.

  Also note that property nodes are running up and down, so the "active conspiracy" must be above the property where you specify the point style.

  Ben

• How to change the style of picture frame

  I would like to know how to change the style of table on the front. For the example below, I would like to remove the covered framework of gray color.

  I could not find the table style editor.

  

  First option: use the table on the classic controls palette, which has no border.

  Second option-

  1. Select the painting tool.
  2. Right click on the border.
  3. With open color dialog box, click the space bar. This toggles the color picker to work on color FG, the background color, or both. It is also described at the bottom of the color picker.
  4. When the two have been selected, you can make the frame completely transparent by selecting the color of T.

• How to change the style of the text of segmentedControl

  Hi all

  Is there a way to change the style of the text in a segmented control?

  The control works perfectly but the texts are so big and I can't change the fontSize of them.

  Someone at - it already do this?

  Thank you

  Because we can not style more standard controls of waterfalls, you can do this without re - implement the entire control, at least for now.

• First Cisco VIEW - change the password for the admin GUI of CLI

  Hello

  We had someone install an instance of VIEW with the Vmware EGG file, but it seems that they never take the GUI password (admin) during the installation phase.

  Does anyone know the process to re-run the configuration script or to change the password for the admin of the SSH session, so we are able to connect to the GUI?

  Thank you

  Andreas

  Hi Andreas,

  Sorry, that I was not able to respond until the EGG has been redeployed, however, it is possible to change the CLI from the server admin password.

  1 SSH on the server VIEW

  2 cd to/usr/local/cisco/dcm/fm/bin

  3 «./addUser.sh--help' to view the syntax of the command.

  The syntax for the addUser.sh script is «./addUser.sh .  The adduser script to add new accounts to users or change the password for the existing user accounts.

  4. to change the admin password, the command should look like this,

  «./adduser.sh admin .

  If you have forgotten the password for the database, you can find it in the file, usr/local/cisco/dcm/jboss-as.7.2.0-Final/standalone/conf/postgres.cfg.xml.  Use the 'cat /usr/local/cisco/dcm/jboss-as.7.2.0-Final/standalone/conf/postgres.cfg.xml' command to print the contents of the file to the screen.

  -Eric

• How change the style of bread crumbs - RoboHelp 11 don't behave?

  Short version: Breadcrumbs in CHM files are not displayed the styles that I have configured HR.

  Long version:

  • Spin RH11.
  • Work in an HTML project, generating a CHM for output.
  • I have a Master Page for the project, in which I generated a placeholder of breadcrumb. I removed the formatting of the placeholder code, so I left that looks like this:
    • <? "type HR-placeholder ="bread crumbs"ph-align = '0' Ms-char =" "& gt;" home = 'Home' usetopicformat = '0' ph-style = ""? >
  • This Page Master refers to the default CSS file: < link rel = "StyleSheet" href = "default.css" type = "text/css" / > "
  • Each section uses this Master Page.
  • Through the project manager, I double-click the default.css file in order to change the appearance of the bread crumbs. Changes through these parameters:
    
  • When recording this, RH place the following code in the default.css file. * Please note (below) that it fails to specify the font, I chose - odd.

  {a.breadcrumbs:Link}

  do-size: 8pt;

  color: #808080;

  }

  {a.breadcrumbs:visited}

  do-size: 8pt;

  color: #808080;

  }

  {a.breadcrumbs:Focus}

  do-size: 8pt;

  color: #808080;

  }

  {a.breadcrumbs:hover}

  do-size: 8pt;

  }

  {a.breadcrumbs: active}

  do-size: 8pt;

  color: #808080;

  }

  Question: To generate the file CHM, bread is present and functional, which makes me think that the Master Page is administered correctly. However, none of the style settings that I've specified for breadcrumbs applied. Instead, bread adopts the same style as the 'normal' style, as to suggest that the breadcrumb in the default.css style definitions are ignored. Note that if I - change manually other styles within the default.css, such as 'p' style, the changes are reflected in the output - that is, I am convinced that I am tweaking the correct css file. .. .then why don't my breadcrumbs adopts the style (s), I've specified?

  Thank you very much, people. With your suggestions, I managed to solve this problem.

  Here's what I did:

  (be thorough for the love of someone falling)

  1. Make a backup of the default.css.
  2. Default.CSS open in an external text editor.
  3. Clear definitions of style to it.

  Then, in RoboHelp;

  1. Open the Master Page and delete the placeholder crumbs of in in.
  2. With the Master Page always opens, add a new placeholder in the bread crumbs, ensure that the check box Use theme Style is checked. Ignore all other parameters.
  3. Click the placeholder of breadcrumbs, so it is selected. Then search for "bread crumbs" style in the pod Style and formatting, right-click and select Edit. Set the style for your bread crumbs. I don't know if this step was required.
  4. Switch (Master Page) HTML view and manually change the navigation bar style definition (I needed to change the font type and size for my project). I don't know if this step was no longer needed.
  5. In the nacelle Assembly project , locate and then right-click the Page Master in question, and then select Properties.
  6. In the Properties window, select the appearance tab, and then make sure the default.css is the style sheet selected.
  7. Open the pod of the list of subjects , select all topics, right-click in the list and click Properties.
  8. In the Properties window, select the appearance tab and make sure that no is selected. Click apply. It may take awhile for HR apply this setting to all of your subjects. This ensures that none of the subjects are directly influenced by a style sheet.
  9. In the Properties window, select the general tab and verify that the Master Page drop-down list displays the master page, you changed earlier. Click apply. It may take awhile for HR apply this setting to all of your subjects. Makes sure that each topic is based on the Master Page, and that's why, by proxy, a style sheet that is associated with the Master Page.
  10. In the Properties window, select the appearance tab again. Note that the selected stylesheet now reads default.css*, despite having just precise we wanted without selected style sheet. The * here indicates that the default.css style is applied, but indirectly, through the Master Page, we applied to all subjects.
  11. Click OK in the Properties window for the topic. Again, this can take a while for HR to apply it to all your subjects. Note that because I deleted all my default.css style definitions, each poster now topic in my project (and the Master Page itself), the default styling HR i.e. There will be no other style definitions to work with - it is read an empty style guide.
      
      Now to build the styles...
  12. Default.CSS open in an external text editor.
  13. Open the default.css backup that you did at the beginning.
  14. Copy the backup to the default.css each style that you want to use in your project. I copied all the models I wanted to use and ignore all others (styles I was not using in this project). You copy styles, save the default.css, tap back to the HR and you should see your saved style definitions added to the Style and formatting pod.

  Then I had to do some manual tweaking of bread style definitions in the default.css, using the text editor. For my needs, my bread crumbs works according to these definitions:

  {a.breadcrumbs:Link}

  do-size: 8pt;

  color: #808080;

  }

  {a.breadcrumbs:visited}

  do-size: 8pt;

  color: #808080;

  }

  {a.breadcrumbs:Focus}

  do-size: 8pt;

  color: #808080;

  }

  {a.breadcrumbs:hover}

  do-size: 8pt;

  }

  {a.breadcrumbs: active}

  do-size: 8pt;

  color: #808080;

  }

  {p.breadcrumbs}

  do-size: 8pt;

  }

  Thank you once again, people.

  Did I miss something?

  ... Sorry, am under the door.