Try to change the setting for my printer so I can print the project

Similar Questions

• FRX Drilldown Viewer Error Message When you try to change the destination printer

  Hello, I have a bit of staff (I'm just technical support) which is affected by the following error message when they try to change the printer output

  in FRX Drilldown Viewer: "error: 0 Cccurred in: APIPrintCommonDialog().

  I hope that some useful information about the system:

  They use the application of visualization FRX exploration down in a Citrix XenDesktop environment. It runs on Windows Server 2008 R2, Enterprise Edition (SP1).

  The OS is a 64-bit version with 8 GB of RAM installed.

  Please feel free to respond with any need for additional information. I tried to search the event logs, but was unable to find anything of use... maybe

  could someone point me in the right direction, it?

  Thank you very much!
  Anthony

  Hello
   
  Thanks for posting the question.
   
  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.
   
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

   

   

  I hope this helps.

• try to change the mode of feeding for a user account, the instructions worked to change the administrator account, but changes do not appear on user accounts.

  On my HP 510 laptop, I want to change the power mode to one of the user accounts.  It cannot be changed of in the user account, so I followed these instructions: log in as administrator, do the selection desired in the list of available eating patterns (Control Panel, Power Options, eating patterns), click on apply, then log in as administrator.  I find that the selected power mode has been applied to the administrator account, but not to one of the user accounts. I tried to change in the user account, but still receive the "access denied" response

  I recently installed Microsoft Security Essentials. My reading of various internet stations indicate that some older antivirus programs may have hindered this process of power management. I was not able to discover how to inactivate Security Essentials, so did not try to change the mode of power without interference from her.

  Another indicated position of the potential interference of the BIOS settings. I don't know how to check if this may be the case. I have MS Windows XP Pro SP3 installed. I have automatic and current updates.

  Thanks for any help, you can suggest.

  Hello

  You can change the setting in see Group Policy for this document:

  http://TechNet.Microsoft.com/en-us/library/cc730920.aspx

  Or change temporarily the user to an admin account, make the changes and then return as a standard user.

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• When I try to change the settings for keyword.url in topic: config to make one "I'm Felling Lucky" Google search, it just resets to chrome://browser-region/locale/region.properties whenever I restart Firefox.

  I just installed Firefox 4 today. When I try to change the settings for keyword.url in topic: config to make one "I'm Felling Lucky" Google search, it just resets to chrome://browser-region/locale/region.properties whenever I restart Firefox.

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the Add-ons is the cause of the problem (switch to the DEFAULT theme: Tools > Modules > appearance/themes).

  • Makes no changes on the start safe mode window.

  See:

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox

  See also:

  • http://KB.mozillazine.org/Preferences_not_saved

• Whenever I try to change the settings for startup from the Control Panel, a pop up tells me that I need to activate Windows Defender and open

  I installed Microsoft Security Essentials today and I'm trying to edit startup programs. Whenever I try to change the settings for startup from the Control Panel, a pop up tells me that I need to activate Windows Defender and open.  However, most of the security will not allow Windows Defender be turned on and I want to change the startup parameters.  How can I accomplish this?

  Hello

  If you use Norton, AVG, Avira, Microsoft Security Essentials, McAfee, etc. the default action is for Windows Defender must be disabled, that these AntiVirus programs have their own Antispyware Applications.

  There is nothing to worry.

  Using both programs at the same time can cause system conflicts, etc.

  If you want to have additional protection against malware using the version FREE of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  And now edit startup in Vista without using Defender programs, use one of the following methods:

  "How to use MSCONFIG in Windows Vista"

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  Or the program Autoruns for FREE:

  "V11.21 Autoruns for Windows"

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  See you soon.

• VB6 crashes when you try to change the power on the DIO state using NIDAQmx.

  When I try to change the power of digital output to a PCI - 6220M cardusing VB6 and NIDAQmx software, my plant of VB6.

  I have request to build a VB6 for the same card read all digital out and analog in, digital.  This app works very well.  I can't just change the power to high status.

  Hello Sir,

  I found a post on our discussion forum to a client who was trying to do the same thing as you and also ran into a crash of VB6. In his case, the accident was caused by an incorrect setting during the call to the function.

  The first part of the post office treats the correct settings. The second part of this post does not apply to your configuration, your type of card that supports under the power state.

  Please keep us informed of your progress.

  Kind regards

  Wouter

  OR Belgium

• When I try to change the defragmentation, OK is not available to click. Help!

  I'm putting defrag to work automatically.  It is said to run 'never', but I don't know how to change it

  Hello

  I suggest you try performin g clean boot and then try to change the setting and check if it helps:

  http://support.Microsoft.com/kb/929135

  NOTE: When you are finished troubleshooting, make sure that restore you the computer mode normal startup such as suggested in step 7 of the above article.

  For more information, see this thread:

  http://Windows.Microsoft.com/en-us/Windows-Vista/schedule-Disk-Defragmenter-to-run-regularly

  It will be useful.

• When I try to change the PS CS6 workspace, I get the following error message: "Could not apply the workspace because of a program error." Does anyone have a solution to this problem

  When I try to change the PS CS6 workspace, I get the error message of passage: "Could not apply the workspace because of a program error." This happens when I try to change the default setting (Essentials) to any other predefined workspace.  Does anyone have a solution for this problem?

  If this fails, Menu Finder > go > go to folder

  ~/Library/preferences/Adobe Photoshop CS6Settings/workspaces (modified)

  Move the change case of workspaces on the desktop, and then restart the Psalm

• When I try to change the properties of an open subject topic, HR crashes

  RH10 using, create CHM files.  When I try to change the properties of an open subject topic, HR crashes.  Is there a patch for this?

  Thank you!

  I found out what was causing the problem: I had customized a framework so this return to the line worked in the design pane (my opinion is set to 125%).  Once I changed this parameter at the initial value of the FAKE, I can now change properties of an open topic. The parameter that I changed was:

  HKEY_CURRENT_USER\Software\Adobe\RoboHelp\9.00\RoboEditor\Defaults\Pag eLayout

  Thanks to all who tried to help!

• ORA-1866 when you try to change the precision of the timestamp column

  Hello
  
  I use Oracle XE. I have a table that contains a Timestamp column. "Fractional precision" is 6 and "Time zone" has the value of HOURS LOCAL time ZONE.
  If I try to change the precision of the timestamp column (set to 2 for example), I get the following error:
  
  Error ORA-1866: the dattime class is not valid.
  The following SQL statement failed:
  ALTER TABLE CLIENTS
  CHANGE ("TIME_STAMP" TIMESTAMP (2) WITH THE LOCAL TIME ZONE)
  
  Please notify.
  Thank you
  MR. R.

  The column is empty? It should be just by reducing the precision.
  Try to run the command in the SQL Plus tool if you have not already done.

  The following should do the job

  ALTER TABLE CLIENTS ADD TEMPCOL TIMESTAMP (2);
  UPDATE CUSTOMER SET TEMPCOL = "TIME_STAMP";
  ALTER TABLE CLIENTS REMOVE THE COLUMN "TIME_STAMP";
  ALTER TABLE CLIENTS RENAME COLUMN TEMPCOL TO "TIME_STAMP";

  Concerning

  Published by: thriller on April 7, 2009 17:22

• When I opened a NEW TAB, it loads 'Bing' - no matter what I try! especially to try to change the configuration settings

  Hello

  When I opened a NEW TAB, it loads 'Bing' - no matter what I try! especially to try to change the configuration settings!

  (Note I recently installed DivX player / converter / movies.. .is this the cause?)

  Then... on desktop... .double click on Mozilla... .loads ok
  Open a new tab..it loads Bing! & I hate it!

  Ive tried;

  1.Tools - options - addons - extensions & plugins - cant see anything there?
  2. On the small address bar (top right) which allows search engines to be managed - all cleared down except google & yahoo
  3. Tools - tab mix plus options - New Tabs - Load on new tabs set to Home Page (doesnt let me change it - greyed out url (conduit.com - see 5 below)
  4. Tools - tab mix plus options - New Tabs - Load on new tabs set to new tab Page - displays the url below (5) but if I try to edit it reverts back every time
  5. If I enter "about:config" & then "browser.newtab.url" in the URL bar I get
  
  browser.newtab.url;http://search.conduit.com/?ctid=CT3321897&octid=EB_ORIGINAL_CTID&SearchSource=69&CUI=&SSPV=&Lay=1&UM=5&UP=SP88BDE404-3DB6-49C4-97F5-96A64775CC57
  
  - rightclick on the selection and type 'reset' IT WONT CHANGE
  
  please can you help me?
  

  Thank you

  Stuart

  I see no mention of the duct. com in your initial post. It is often a good indication that you will taken place unwanted software.

• When I try to change the search words in the browser, it goes back to the expression of the typed original and does not accept the change

  "When I try to change the words in firefox search does not accept... g e. I type in the search for"Joe Bloggs"and then try to change her search to search for"Joe Bloggs"Football it trying to connect briefly and then displays the results of the previous search" Joe Bloggs "and added words 'Football' no longer appear in the search bar.

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• "Due to a problem not identified, Windows cannot display Windows Firewall settings" when you try to change the Windows Firewall settings.

  Original title: WINDOWS firewall

  I GET A MESSAGE WHEN I TRY TO CHANGE THE WINDOWS FIREWALL SETTINGS - "DUE TO A PROBLEM NOT IDENTIFIED, WINDOWS CANNOT DISPLAY WINDOWS FIREWALL SETTINGS. HOW CAN I SOLVE THIS PROBLEM?

  IN ADDITION, I USE AVG INTERNET SECURITY 2013 AND THAT THE FIREWALL IS ENABLED AND I SEEM TO BE PROTECTED.

  Documentation AVG Internet Security 2013 States:

  Recommendation:

  Generally it is not recommended to use more than one firewall on a single computer. Computer security is not enhanced if you install several firewalls. It is more likely that some conflicts between these two applications will occur. Therefore, we recommend that you use only one firewall on your computer and disable all others, thus eliminating the risk of potential conflicts and problems related to this.

  You can read the AVG documentation by clicking on this link, and see section 6.5:

  http://AA-download.Avg.com/filedir/doc/AVG_Internet_Security/avg_isc_uma_en_2013_06.PDF
  
  So, if you are using AVG firewall, it's wise to just disable the XP firewall for more than a firewall running at the same time can lead to performance problems.  Choose one or the other, but not both.

  I thought installing AVG would understand this by itself, and you know what to do (used to) but I do not want to install AVG to see.

• Windows XP SP3: Access denied error when you try to change the beginning upward in MS CONFIG. Director of applications but I am the administrator.

  original title: access denied errors when you try to change the beginning upward in xp sr CIP 3 msconfig. I am the administrator, please the administrator

  I am a user with privileges under windows xp pro service PAC 3. I recently received an access denied error message acusing me of not being the administrator when I tried to limit the start up programs in msconfig. What should I do these changes in safe mode?

  You have scanned your system for malware? It seems its infected with something. Download ccleaner install / run. Then go to tools / startup. Delete the entries that you want here

• Error unknown 0x88982F50 when you try to change the properties of a JPEG file in the Windows Photo Gallery

  I am running Windows Vista Home Premium Service Pack1 and use Windows Photo Gallery to managemy photos. I like the fact that I can integrate tags and ratings in JPEG files.

  I just noticed though, that the tag is no longer to be stored in the JPEG file. I know because when I saw the properties of the file tag information I have in the Windows Photo Gallery is not present. If I try to change the properties directly, I get an error message stating:

  An unexpected error prevented the operation. Make a note of this error code, which might be useful if you get additional help to resolve this problem: 0x88982F50 error: No. Error Description available.

  I checked the file isn't read-only etc.

  I searched Microsoft.com for this error and have found no help. I searched the internet and have seen many forums to raise this issue, but I can't find a solution.

  Note that when I try to fix an image in Windows (eye of harvest/red etc.) Photo Gallery, I also get an error that says I can't save the changes.

  For me, it looks like a component is faulty or missing, but how is it resolved?

  Hi RealPaulus,

  Solution for error 0x88982F50:
  1 open the Task Manager by right-clicking the taskbar
  the bottom of your screen and choose the task manager of
  the menu.

  2. click on the processes tab, along the upper part of the task
  Manager screen.

  3. in the processes tab, select the corresponding button at the bottom left
  of the screen that says "show processes from all users".
  and click on it. Click on 'Continue' in the UAC prompt that
  rises.

  4. the screen should turns off a moment, and then return with
  many more listed processes. Click on the column "command."
  Line"to sort the list and search for:

  "C:\Program Files\Windows Media Player\wmpnetwk.exe"

  Read the description in the next section on:

  Windows Media Sharing Service reader network

  5. click on this process. Click the end «»
  Treat button"at the bottom right of the screen.
  Confirm 'End process' if necessary.

  6 perform the steps 1-5 before opening a Windows Explorer
  window for the first time in the current session.

  Eliminate that a will of the Task Manager process
  Restore Windows Explorer ability to 'see' as well as
  'Add', 'remove' or 'edit' Tags or other properties to a file to
  JPEG files.

  Samantha M S

• When I try to change the permissions on the folders, I see the error "an error has occurred applying security information to: < \\folder > access denied»

  Original title: APPLICATION SECURITY ERROR

  I recently changed my security permissions for a public folder to full control.  However, when I try to change the permissions of return, you receive an error "an error has occurred applying security information to: <\\folder>access is denied."  I then click on continue and I receive «Cannot save changes to authorization on <\\folder>access denied»  What waste? and how can I solve this problem?

  Hello Craig powers,.

  For that matter, please submit this question to the forum below for Home Server.

  Home Server:

  http://social.Microsoft.com/forums/en-us/category/WindowsHomeServer/