Lenovo Y400 issues, include freezing at startup, not closing, etc.

Similar Questions

• G50-70 freeze at startup

  Hi, I have a G50 - 70 is only around the age of 2 months. Since then, he has had a problem with the immediate freezing at startup on the Lenovo screen where white swirling points stop. It happens about 1 in every 2 or 3 times it starts.

  I thought it would be Bios so I installed the 2 updates that have been released without effect. I tried to turn it off to quick start and the alternative boot - USB, LAN options.

  Any suggestions?

  Thank you

  Hi Rich5555,

  Have you tried to reinstall the driver and check the issue?

  Try to start the system in safe mode and restart the system and check the question, also perform system retore and check for the issue.

  I hope this helps. Do not post back if the problem persists.

  Best regards

  Ashwin. S

• Vista Windows freezing guard, does not and will not close properly

  My computer freezing guard, does not, and it not stop correctly. What should I do to solve this problem! I tried to delete the temporary files and running a virus scan and no help

  Hello

  What antivirus/antispyware/security products do you have on the machine? Be one you have
  EVER had on this machine, including those you have uninstalled (they leave leftovers behind which)
  may cause strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out what are the files, registry keys and other objects processes have
  Open, which DLLs they have loaded and more. This exceptionally effective utility will show same
  you who owns each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured so that it starts automatically when your system
  boots and you login. Autoruns shows you the full list of registry and file locations where
  applications can configure Auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded
  automatically when Windows starts. For each request, the following information
  appears: Type of startup (registry/Startup folder), Command - Line String, name of the product;
  File Version, company name, location in the registry or the file system and more. It allows you to
  allows you to easily disable or remove unwanted programs that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The
  Window Watcher says it all, reporting of any window created by running programs, if
  the window is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now click on
  Driver update (this can do nothing as MS is far behind the certification of drivers) - then right
  Click on - uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, this leaves ONE of Windows updates, but it will not install the drivers who will be generally
  be older and cause problems. If updates offers a new driver and then HIDE it (right click on it) and
  Then, get new ones manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• Qosmio G30 freezes at startup of Norton Internet Security 2008

  Norton Internet Security 2008 will freeze my computer because soon, it attempts to load and the only way to do is to restart the system by pressing the on/off key.

  My laptop is a Toshiba Qosmio G30-177 (model No. PQG32E-02G022GR) with Vista Ultimate and pre-installed NIS2007. I have no problem with this NIS2008 version on my other laptop (Qosmio F10 - PQF10E-02300JGR, WinXP MCE).
  NIS2007 works well on my G30 and I have no problems at all, but more recent versions of NIS seem to be in conflict with my system:

  1. I am able to install and run the new version, download all updates and adjusting the settings. Maybe, a couple days later my computer freezes after start in exactly when the NIS tray icon appears. For a few seconds there is simply no response of the system at all and the LED of my laptop show that any HD activity has ceased. After having been inactive during those seconds, the cooling fan will start to operate at maximum power, creating a huge noise that I never experienced before, not even while the CPU was operating at 100% for a while due to other programs. Force a reboot, that's all I can do.

  2. now, this time, I rebooted my laptop successfully even once (took a few attempts) and it all of a sudden not freeze. Then I disabled the firewall and auto-protect at all times, so there was no freezing at startup and I just had to enable both the firewall and auto-protect after start manually. In order to avoid the gel again after the reboot, I always disabled NIS before shutdown. For one or two days of workaround has been quite successful.

  3. all of a sudden, after one or two days, this work around will become useless, because the system begins to freeze again at the time of the icon is displayed. In this case, restart has no effect at all, and NIS will continue to freeze at startup. I also tried to prevent form from NIS to ccApp.exe run automatically at startup (administrative tools > system configuration > "Startup" tab). It's successful and my laptop is able to start normally, but if later I try to start NIS manually, it will freeze again.

  I had this problem since NIS2008 just came out, so I thought that at the same time an update Windows or Norton may have solved the problem, but this weekend I gave another NIS2008 trying without success. I'm pretty sure that the problem is not caused by other software than Windows or Norton, because I also tried to install NIS after a full system recovery, so I've only preinstalled NIS2007 and Vista on my laptop. I use Norton removal tool and follow the instructions to uninstall before attempting to install the new version of course.
  My last hope was that the version of NIS2009beta somehow would not freeze my system, but it does. It does not matter if I try to start 2008 or version 2009beta, the problem is exactly the same.

  What really motivates me almost crazy is the fact that NIS works perfectly for a while, then needs enough small workaround, and then after some time completely refuses to work. In these two days I do not change system settings, install or uninstall programs or doing whatever it is that I felt might conflict with NIS...
  So far, I have no idea of the solution and have again use NIS2007.

  Someone knows how to fix this?

  Hello

  To be honest I don t use the Norton internet security because it slows down the performance of the laptop and he needs too many resources.
  I used the NIS06 and after several months of use I removed it from my system for the reasons mentioned above.

  I put really know what might be a problem with your Norton Internet Security but I guess its associated software question maybe there are a few compatibility issues with vista and NIS08. Who knows...

  In my opinion, you should first check the Symantec Web site for more details.
  Maybe these questions are mentioned somewhere in the FAQ section and maybe some updates or patches are available.

  Good bye

• Satellite C660 freezes at startup

  Hey guys can help you with my laptop, Toshiba Satellite C660-17J. At startup, it freezes even though not all the time. By freezing, I mean I can move the mouse but not open anything and nothing on the task bar highlight. The only thing I can see different is that the (wireless) network icon does not appear. The last time he if but showed only the networks symbol search.

  If I turn the laptop using the power button and start in safe mode and then restart it works OK. Do you have any suggestions whats the cause?

  Maybe your system is confusing to the top?
  Did you test new OS install? Would certainly recommend that you test this before more detailed investigations.

  Are you able to perform HARD drive recovery?

• Time of Lenovo Y400

  The time on my Lenovo Y400 system continues to change. I even put it in the BIOS and it won't right now. Can anyone help? Thanks, mc

  Hi mceventphoto,

  Welcome to the Community Forums of Lenovo!

  You can try and visit these parameters,

  Go to the control panel to access the Date and time

  > Check if your time zone is Correct

  > Click on the tab that says time Internet / click on change settings and uncheck the sync with a Web server.

  >>. If it is not enabled already, try to check it out and make sure that its game to time.windows.com

  Change the time and restart, observe the system if it will change again.

  Hope this helps,

  See you soon!

• My computer constantly freezes after startup

  Original title: System Hang

  My computer freezes after startup or during startup. Whenever I look at the problems and solutions in Control Panel, it says that my nvidia graphics driver has stopped working properly and should be updated but I checked and installed the latest version. What else could I try? I would appreciate the help as I have had this problem before and it stopped for a while and started again.

  Thanks-James

  Hello

  Yes, different drivers depending on the graphics card which is present in the system. I suggest to check the link below and download the drivers that are present in the link.

  Vista 32 bit

  http://www.nvidia.com/object/Win7-WinVista-32bit-266.58-WHQL-driver.html

  Vista 64-bit

  http://www.nvidia.com/object/Win7-WinVista-64bit-266.58-WHQL-driver.html

  After having tried the steps, let us know if the problem is solved or not.

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• EliteBook 8540w randomly freezes at startup

  Hello

  Since I activated the encryption of the hard drive in HP ProtectTools and invalidate it later, I experience random freezes at startup of Windows 7 Professional 64 bit. The gel has also occur when booting from the Windows 7 DVD and a reinstallation of the operating system Windows 7 also has not fixed the problem.

  Help, please.

  Thanks in advance,

  Donenzone

  You might want to try a complete reformat of the hard drive and reinstall W7.  Ugly process, but then you will have a better palce to start with future debugging if necessary. However, before you do a reformat, try the following two procedures.

  Try this procedure:

  Disconnect the PC and open it. Clean all the dust. Carefully, remove and replace all the cables towards the mother board one at a time. Do the same for memory DIMM and the video and the sound of cards if you have a. Plug your PC give a TI a go.

  Here is another list of things to try:

  1. Download cookienator (it's a gift) and clean the House.
  2. Open my computer and right mouse click the hard drive--> properties--> disk cleanup
  3. Start Internet Exployer--> tools--> Option Internet--> delete browsing history
  4. Open my computer and right mouse click on the hard drive-->-->--> Defrag tools properties now
  5. Open my computer and right mouse click the hard drive--> properties--> tools--> Check now
  6. Open the RUN and enter the following commands:

  cmd

  sfc / scannow---> it will check your critical system files and try to fix

  output

  7. open the window RUN and enter the following command: chkdsk

  8 restart and see how things are going.

• Taskbar freezes at startup of the system

  Hello
  Since last week, I have problem with my windows 7 and I don't know how to solve.
  problem:
  Immediately after my pc on (boot is ok) my lower left panel freezes and does not meet all clicking. Also when I open a file, I can't work with this, because it does not.
  This is the only way how to fix - by pressing ctrl + alt + del. Nothing else.
  I must say, that I tried to reinstall it 3 times and after each reinstallation, it has the same problem.
  I tried to use the command sfc/scannow (all ok), I tried to scan the HARD drive - without errors and verification through the diagnosis of memory did not appear any errors of memory.
  I don't really know what to do. This problem occurs on the own w7, x 84.

  Thanks for help

  Original title: low start Control Panel freezes

  Hi Soldii,

  Thanks for posting your query in Microsoft Community.

  • You did it any significant hardware or change software on the computer before this problem?
  • You get the error message? If Yes, what is the exact error message you get?

  I can understand that the taskbar freezes when you boot your system.

  It seems that some third party software startup service hinders the normal starting procedure and so you are unable to work with the taskbar.

  I would suggest trying the following methods and check if the problem persists.

  Try to start the system in safe mode and check if the number is reproduced. If this isn't the case, then clean the computer starts and check if that helps.

  Step 1:

  Safe mode is a diagnostic mode in which you are connected with only the minimal necessary services and active pilots. Check if the number is reproduced.

  Start your computer in safe mode

  Step 2:

  Put your system to the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.
  How to perform a clean boot in Windows

  Note: See "how to reset the computer to start normally after a boot minimum troubleshooting" to prepare the computer to start as usual after a repair.

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• New computer freeze at startup

  I just got to build my new computer about a week ago and it was a lot of work. This morning it was freezing at startup. When I click on anything whether it's Windows, it freezes. When I hover over anything, it freezes, etc. I'm sure it's a software problem, because when I start in safe mode, it works fine.

  I read that Avast! has given people of the problems with the gel, so I tried to uninstall, and it does not solve my problem. I also installed Malwarebytes and ran a scan in safemode, it detected only a very small PUPPY, nothing serious.

  Since it works fine in safe mode, I hope that the problem can be easily solved, but I don't know how to fix. It's really frustrating because it worked fine before, but now all of a sudden, it isn't.

  Any help is appreciated.

  Hello

  Think that material.

  Remove all power and then reinstall all the memory cards and cables (at both ends where possible).

  Check the memory.

  Update BIOS, drivers from the chipset of low level and all main dashboard and separate device drivers.
  Check with Support from the manufacturer of the motherboard, their online documentation and drivers, and
  Ask problems known in their forums. Do the same thing to individual device manufacturers.

  Tests of memory intercept all errors such as memory do not match (possible even for sticks
  seemingly identical) and when the faster memory is placed in system behind the slower memory.
  So it is best to Exchange also sticks in and out to check for those, even if all the tests of memory do not
  show a problem.

  To test the RAM here control - run 4 + hours or so.<-- best="">
  www.memtest.org

  For the Windows Memory Diagnostic tool.

  WinKEY + W - type in the search-> memory box - find the top Memory Diagnostics tool
  list - and follow the prompts.

  Windows Vista: How to scan / test your memory with Windows Vista memory or RAM
  Diagnostic tool
  http://www.shivaranjan.com/2007/11/01/Windows-Vista-how-to-scan-test-your-RAM-or-memory-with-Windows-Vista-memory-diagnostic-tool/

  How to run the diagnostic tool for memory Windows 7 (and 8) - in Windows 8 the
  the name is "Windows Memory Diagnostic".
  http://www.SevenForums.com/tutorials/715-memory-diagnostics-tool.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• laptop freezes on startup

  Hi, I m having hp Pavilion dv5-1110em laptop computer with windows 7 ultimate version 64 bit... in the last week he stop from and freezes at the windows logo but working safe mode, but today the safe mode also freezes at startup when loading the drivers... now I get no option to boot up my laptop I didn't not recovery also disks... Please help

  Yes, I've tried everything...

• Applications Mac 2015 CC freeze at startup since the update

  I ran the updates last week and each CC app now cycles constantly, causing my computer to slow to a crawl and freezes at startup and I have to force reboot the system with my power button. Whenever my volume Directory is damaged and must be repaired.   I reinstalled DW 2015 and it can work, but my apps CS6 certainly work, unless I try to start a CC application first.

  "Here is a sample of my messages to the console of the PS that level."

  added support of microprocessor extension. » :

  30/04/16 2:57:12.727 PM Adobe Desktop Service [1803]: objc [1803]: Httpentete of the class is implemented in/Library/Application Support / Adobe / Adobe Desktop Common/Core/AdobePIM.dylib both/Applications/Utilities/Adobe Creative Cloud/HomePanel/HomePanelBL.bundle/Contents/MacOS/HomePanelBL. One of the two will be used. That one is not defined.

  30/04/16 2:57:12.727 PM Adobe Desktop Service [1803]: objc [1803]: ProxyManager of the class is implemented in/Library/Application Support / Adobe / Adobe Desktop Common/Core/AdobePIM.dylib both/Applications/Utilities/Adobe Creative Cloud/HomePanel/HomePanelBL.bundle/Contents/MacOS/HomePanelBL. One of the two will be used. That one is not defined.

  30/04/16 2:57:35.763 PM Adobe Desktop Service [1803]: dynamic_cast 2 error: one or more of the following type_info has hidden visibility.  They should all have public visibility.   N8CryptoPP20StreamTransformationE, N8CryptoPP36CipherModeFinalTemplate_CipherHolderINS_16BlockCipherFinalILNS_9CipherDirE0EN, S_8Rijndael3EncEEENS_14CBC_EncryptionEEE, N8CryptoPP28AuthenticatedSymmetricCipherE.

  30/04/16 2:57:53.123 PM Adobe Desktop Service [1803]: warning: Gestalt gestaltSystemVersion selector returns 10.9.4 instead of 10.11.4. This isn't a bug in Gestalt - it is a documented restriction. The NSProcessInfo operatingSystemVersion property to get the correct version number of system.

  Location of the call:

  I did remove and reinstall before Manager app and creative cloud... I'm on a slow internet connection if updates or reinstall takes me 12 hours.

  I suspect that part of the problem may be the internet CC... but not sure audit services.   I'm quite frustrated to give up the entire suite of CC.

  I had to reinstall my whole OS El Capitan among other attempts to try to solve this problem...

  OK, I come to the broad support with apple and it seems that CC is no weird GPU calls that are not finishes and the programs are suspended.

  GPURestartReportEnd

  30/04/16 2:44:29.000 PM kernel [0]: attempt to restart GPU (AMD over-pants D500)...

  30/04/16 2:44:29.000 PM kernel [0]: [2:0:0] unable to reset hung GPU! result = 151 ulResetBlockBitmap = u 0 x 00008000lResetResultBitmap = 0 x 00008000

  30/04/16 2:44:34.000 PM kernel [0]: [2:0:0] GPU HangState 0x00000000, 0 x HangFlags 00000006: IndividualEngineHang 0, NonEngineBlockHang 1, FenceNotRetired 1, PerEngineReset 0, FullAsicReset 1

  30/04/16 2:44:34.000 PM kernel [0]: * GPU ASIC startup Log *.

  -

  HangFlags 0 x 00000004 GPU: AsicHangState 0 x 00000004, AsicResetRequirement 0x00000002

  IndividualEngineHang: 0

  NonEngineBlockHang: 0

  FenceNotRetired: 1

  PerEngineReset: 0

  FullAsicReset: 1

  HangEngineBitmap: 0x00000000

  ------------------------

  PCIe AMDTahitiGraphicsAccelerator material: [2:0:0] State: ENABLED

  Configuration: deviceBits: 0x5009679e, capabilityBits: 0x30840b00

  TotalVideoRAMBytes: 0x00000000c0000000 (3221225472)

  Path: / Applications/Adobe Photoshop 2015/Adobe Photoshop 2015.app/Contents/MacOS/Adobe Photoshop 2015 CC CC CC

  40? (Adobe Photoshop CC 2015 + 3845113) [0x10bef6bf9]

  40? (Adobe Photoshop CC 2015 + 3843018) [0x10bef63ca]

  40? (Adobe Photoshop CC 2015 + 11471088) [0x10c63c8f0]

  / Applications/utilities/Adobe Creative Cloud/*/CCXProcess.app/Contents/libs/node

  40 adobe: vulcan::servicemgr::RegisterForEventsRequest::Run() + 1005 (VulcanMessage5.dylib + 59679) [0x10279091f] 1-40

  40 adobe: vulcan::servicemgr::CSIRequest::Execute() + 50 (VulcanMessage5.dylib + 56934) [0x10278fe66] 1-40

  0 x 100000000 - 0x100e17fff <77B964CF-C5AD-343F-B912-2186CF942FBF>Node/Applications/Utilities/Adobe Creative Cloud/*/CCXProcess.app/Contents/libs/node

  0 x 102782000 - 0x1027bafff VulcanMessage5.dylib (1) <4B0B878A-02F8-3EB1-89D5-4071034EDD0D>Applications/Utilities/Adobe Cloud/*/CCLibrary.app/Contents/js/node_modules/node-vulcanjs/build/Release/VulcanMessage5 creative .dylib

  Path: Applications/Utilities/Adobe Creative Cloud/*/CCLibrary.app/Contents/libs/node

  40 adobe: vulcan::servicemgr::RegisterForEventsRequest::Run() + 1005 (VulcanMessage5.dylib + 59679) [0x10766f91f] 1-40

  40 adobe: vulcan::servicemgr::CSIRequest::Execute() + 50 (VulcanMessage5.dylib + 56934) [0x10766ee66] 1-40

  0 x 100000000 - 0x100e17fff node <77B964CF-C5AD-343F-B912-2186CF942FBF>Applications/Utilities/Adobe Creative Cloud/*/CCXProcess.app/Contents/libs/node

  0 x 107661000 - 0x107699fff VulcanMessage5.dylib (1) <4B0B878A-02F8-3EB1-89D5-4071034EDD0D>Applications/Utilities/Adobe Cloud/*/CCLibrary.app/Contents/js/node_modules/node-vulcanjs/build/Release/VulcanMessage5 creative .dylib

  ------------------------

• Photoshop CC 2015 suddenly started to freeze at startup

  My Photoshop has suddenly started to freeze at startup. Creative cloud does not open more, just get out something blue Sundial.

  and about the ps, reset your preferences - https://forums.adobe.com/thread/375776

• Dreamweaver 2015.1 freeze at startup and during shutdown

  Win 7 x 64 SP1

  5960 x cpu

  MB: RAMPAGE EXTREME V

  64GB mem, Gskill

  ASUS Titan X GPU

  Zalman PSU 1000HP

  Stable the system otherwise.

  It always starts by ' switch to ' / 'Retry', sometimes it just freezes at startup for several minutes.

  and when shutting down, it freezes just minutes.
  

  This happens all the time... I'm fricking out!

  Thank you!

  The problem, or one very similar to it, seems to have something to do with the functionality of cache for the site of DW. A workaround that has helped others is to create a new site and leave it empty then switch to this empty site just before turning off.

  If this does not help, I would also try to disable the Cache of the Site all together...

  1. go to Site > Manage Sites

  2. highlight the site and click the button change

  3. go in advanced > local news

  4. uncheck the box enable Cache

  5. save

  6 rinse and repeat for each site

• Hi, my illustrator CS5 freezes at startup. It was working properly until last Friday, now I can't open it. can someone help me?

  Hi, my illustrator CS5 freezes at startup. It was working properly until last Friday, now I can't open it. can someone help me?

  Leo,

  You can try the list (5) being less likely).

  The following is a general list of things, try when the question is not in a specific file, and when it is not caused by problems with opening a file from external media. You tried/made some of them already; 1 and 2) are easier for temporary strangenesses and 3) and 4) specifically preferences might be corrupt); ((5) is a list in itself and 6) is the last resort.

  If possible / there is, you must record a current work first, of course.

  (1) close Illy and open again.

  (2) restart the computer (you can make up at least 5 times);

  (3) close Illy and press Ctrl + Alt + Shift / Cmd + Option + shift during startup (easy, but irreversible);

  4) move the folder (follow the link with this name) with closed Illy (more tedious but also more thorough and reversible), for CS3 - CC you can find the file here:

  https://helpx.Adobe.com/Illustrator/KB/preference-file-location-Illustrator.html

  5 look through and try the relevant among the other options (click on the link with that name, item 7) is a list of the usual suspects among other applications which can disturb and confuse Illy, point 15) applies to the maybe CS5, CS6 and CC);

  Even worse, you can:

  (6) (check the box to delete the preferences), run the cleanup tool (if you have CS3/CS4/CS5/CS6/CC) to uninstall and reinstall.

  http://www.Adobe.com/support/contact/cscleanertool.html