Support/best practices to restore the application of planning between servers

Similar Questions

• Registration type of best practices for updating the mapping of cascading for account drop-down list

  1. most bearing the name of choice in parent list values and related lookup has been changed in the main list of the external application, so the same should be updated in CRMOD.
  
  2 to update the value of the list of choices, do we need to DISABLE the existing value and CREATE a new list of selection.
  
  3. are there best practices to avoid the manual pick list Cascading draw for the record type account? because we have about 500 values in list dropdown to map with parent and related list of choice.
  
  Thank you!

  Mahesh, I recommend disabling the existing values and create new ones. This means that the remap manually cascading dropdown lists.

• I'm looking for help to share best practices to upgrade the Site Recovery Manager (SRM), if someone can summarize the preparatory tasks?

  I'm looking for help to share best practices to upgrade the Site Recovery Manager (SRM), if someone can summarize the preparatory tasks?

  Hello

  Please check the content below, you may find useful.

  Please refer to the URL: Documentation VMware Site Recovery Manager for more detailed instructions.

  Important

  Check that there is no cleanup operation pending on recovery plans and there is no problem of configuration for the virtual machines that protects the Site Recovery Manager.

  1 all the recovery plans are in ready state.

  2 the protection status of all protection groups is OK.

  3 the status of the protection of all the individual virtual machines in the protection groups is OK.

  4 the recovery of all groups of protection status is ready.

  5. If you have configured the advanced settings in the existing installation, note settings you configured before the upgrade.

  6 the vCenter local and remote server instances must be running when you upgrade the Site Recovery Manager.

  7 upgrade all components Server vCenter Site Recovery Manager on a site until you upgrade vCenter Server and Site Recovery Manager on the other site.

  8 download the setup of Site Recovery Manager file in a folder on the machines to be upgraded the Site Recovery Manager.

  9 make sure no other facilities-\no updates windows restarts done shoud

  Procedure:

  1. connect to the machine on the protected site on which you have installed the Site Recovery Manager.

  2. backup the database of Site Recovery Manager by using the tools that offers the database software.

  3. (optional) If you upgrade of Site Recovery Manager 5.0.x, create a 64-bit DSN.

  4 upgrade the instance of vCenter Site Recovery Manager server that connects to vCenter Server 5.5.

  If you upgrade a vCenter Server and Site Recovery Manager 4.1.x, you upgrade the instances of vCenter Server and Site Recovery Manager server in the correct sequence until you can upgrade to Site Recovery Manager 5.5.

  a upgrade vCenter Server 4.1.x to 5.0.x server.

  b Update Site Recovery Manager of 4.1.x to 5.0.x.

  c upgrade server vCenter Server 5.0.x to 5.5.

  Please let me know if it helped you or not.

  Thank you.

• Best practices for securing the Oracle e-Business

  Is there anything in addition to best practices for securing the Oracle e-Business
  Suite 11i that consideration for the safety of the Oracle E-Business Suite?

  Try:

  http://repo.solutionbeacon.NET/Collab07BestPracticesWP.PDF

  http://www.Integrigy.com/Oracle-security-blog/archive/2007/07/27/11i-updated-security-best-practices

• Unable to remove the application from planning 11.1.2.2

  Hi all
  
  
  
  I've removed the Hyperion of EPMA Application Library howerver Planning Application when I click on Navigate-> applications-planning of the workspace, I am still able to see the application of planning that I deleted applications EPMA library. How to completely remove the Planning Application.
  
  Kindly help me.
  
  
  Kind regards
  AS

  If you have restarted the service, and it is always the same then you will need to manually delete the app, have a read of planning 11.1.1.3 - manually remove a classic Application

  Or if you can still you connect to planning app, then you might try conversion classic back and then delete. To convert back to classic go to manage properties under Administration: EDIT_DIM_ENABLED = TRUE
  Restart the services, go to the planning administration and remove the app

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Best practices for integrating flex application in html

  Hello guys

  I don't know what the best practice is to embed the flex application. We couldn't use the html code in flex builder. You guys edit html of other tools files to integrate the swf file when the application is completed or when there are other ways to do it. Thanks for the reply.

  Hi Jerry,

  Why you couldn't use the html generated code in flex builder. In the html wrapper file generated in FlexBuilder you have SWF embed code directly, as well as javascript Flash Player detection code... If your users do not have the FlashPlayer installed or if they not have the latest version of Flash Player installed, then the application invite users to install the latest Flash player plugin...

  What is the problem that you have obtained the help of the html wrapper file generated in FlexBuilder.

  Thank you

  Jean Claude Chari

• best practices to increase the speed of image processing

  Are there best practices for effective image processing so that will improve the overall speed of the performance? I have a need to do near real-time image processing real (threshold, filtering, analysis of the particle/cleaning and measures) at 10 frames per second. So far I am not satisfied with the length of my cycle so I wonder if he has documented ways to speed up performance.

  Hello

  IMAQdx is only the pilot, it is not directly related to the image processing IMAQ is the library of the vision. This function allows you to use multi-hearts on IMAQ function, to decrease the time of treatment, Arce image processing is the longest task for your computer.

  Concerning

• Best practices for storing the Logs of the system for all newly improved ESXi hosts?

  Hi people,

  What are the options and best practices for the Logs of the system for all newly improved 5.1u1 ESXi hosts?

  Do I need to have the Syslog server or it can be safely ignored?

  Thank you

  Evening,

  Syslog is preferred, but VMware has provided a collector of syslog on the vcenter installation disc can be installed on any windows host or your vcenter. I can't count the number of times where I had guests CMTF or newspapers lost... Fortunately for the syslog which collects up to the accident.  It is not necessary, but it's really a good idea without any real cost since you can use your vcenter host.

  Here is an article on how to install it:

  Set up Syslog ESXi collector | VMware vSphere Blog - VMware Blogs

  Thank you

• Best practices for handling the elements and symbols (including preloading)

  I'm learning to animate edges and I've not seen enough animations of how this is handled in general and I searched the forum and have not found answer either.

  If you have many different elements and symbols for a project, what is the best practice to have appear them, disappear, etc. on the timeline? I ask this not only from a point of view based on performance, but also keeping in mind the idea of prestressing. This is a 2 part question:

  Part 1: Using elements and symbols later in the timeline:

  Given that the work is always imported directly to step in a status of "always you", should we place visibility TURNED off on each element until we need?

  or must they be opacity 0 until I need them?

  or should they be on visibility hidden until I need them?

  Which one is the best option if you want only the element / visible until at the latest symbol in the timeline? Is how important it?

  Part 2: Effect when the page is loaded

  The question above have an impact on page loading speed

  or is it something called a preload?

  or do you need to make a special preloader?

  Thanks for the help.

  Hey, snail-

  Good questions!

  Part 1: Using elements and symbols later in the timeline:

  Given that the work is always imported directly to step in a status of "always you", should we place visibility TURNED off on each element until we need?

  or must they be opacity 0 until I need them?

  or should they be on visibility hidden until I need them?

  Which one is the best option if you want only the element / visible until at the latest symbol in the timeline? Is how important it?

  I would recommend that you set your visibility on 'off' instead of simply change the opacity.  I suggest this is that when your visibility is set to off, the points of the object disappear.  If you have any type of interactivity, with the always visible object with an opacity of 0 will interfere with what whether you down in the display order.

  Part 2: Effect when the page is loaded

  The question above have an impact on page loading speed

  or is it something called a preload?

  or do you need to make a special preloader?

  Thanks for the help.

  No, none of this has any impact on the loading of the page.  As you already noticed, all the assets of your project will be load before displaying.  If you don't want a part of your composition to load, you can do what we call a multi-composition project.  There is a sample of the said in the API to animate Edge in the Advanced section and lots of messages in the forums (and the other in the team blog) explaining how to do this.

  http://www.Adobe.com/devnet-docs/edgeanimate/API/current/index.html

  https://blogs.Adobe.com/edge/

  Hope that helps!

  -Elaine

• best practices for placing the master image

  Im doing some performances / analysis of load tests for the view and im curious about some best practices for the implementation of the image master VM. the question is asked specifically regarding disk i/o and throughput.

  My understanding is that each linked clone still reads master image. So if that is correct, then it seems that you would like the main image to reside in a data store that is located on the same table as the rest of the warehouses of data than the House related clones (and not some lower performing table). The reason why I ask this question, it is that my performance tests is based on some future SSD products. Obviously, the amount of available space on the SSD is limited, but provides immense quantities of e/s (100 k + and higher). But I want to assure you that if, by putting the master image on a data store that is not on the SSD, I am therefore invalidate the IO performance I want high-end SSD.

  This leads to another question, if all the linked clones read from the master image, which is general practices for the number of clones related to deploy by main image before you start to have problems of IO contention against this single master image?

  Thank you!

  -

  ---

  Omar Torres, VCP

  This isn't really neccissary. Linked clones are not directly related to the image of the mother. When a desktop pool is created and used one or more data stores Parent is copied in each data store, called a replica. From there, each linked clone is attached to the replica of the parent in its local data store. It is a replica of unmanged and offers the best performance because there is a copy in every store of data including linked gradient.

  WP

• best practices for loading the swf file

  Greetings,

  Using CS5 AS2

  I am creating a website in flash (all files are in a directory/folder on SharePoint) and want to make sure that what seems to work well is recommended.

  I have an index.swf with many buttons that will take the user to landing pages/content/other SWFs. On these various buttons, I have the script...

  (release) {loadMovieNum ("name.swf", 0) ;}}                I could also just do {loadMovie ("name.swf", 0) ;} ?}

  Transitions film nicely name.swf and on this page, I have a button that returns the user to the index.swf...

  (release) {loadMovieNum ("index.swf", 0) ;}}   Things back to index.swf nicely and the user can chose to go to a different landing page.

  It seems that I am on the right track, BC., nothing's wrong? but want to check out. I'm following best practices for moving from one swf to another within a Web site?

  Thanks for the help or confirmation!

  You are welcome.

• The best way to connect 2 the application of ADF database servers?

  Until merge us the databases, I have a situation where I need to connect and to interview the two different databases. If the number of declaration is < 9 digits, use DBConn1, otherwise use DBConn2.
  
  I thought to use two modules of the application, but how would pass between the two connections in the code, let's say, a command button from the user interface with links?
  
  Is this possible at all?
  
  Thank you
  
  John

  In any case, you will need different display objects to query different data.

  The easy thing would be for create you to choose a database as the main one and in this database, DB links to the database. Then create a synonym for the table in the database, and then build your second view object against the synonym for the link to the DB.

  It is the best way to achieve your goal.

• What is the best way to restore the operating system to Windows XP?

  I don't have a restore cd. I have a corup large files in the Window XP operating system & restore point fail & did not save at all. I may have to save all the files & nuke all over again, but not CD of resettlement to the SOS HDD. Thank you

  Some manufacturers (like Dell and HP) computer include a partition recovery system on the hard disk that you can use to restore the computer as long as the plant.  Check the manual for your computer.

• Best way to restore the corrupt catalog

  The catalogue was apparently corrupted in PSE 12 when I tried to move some items from C on an external drive, and the program crashed during this process.  The last backup in PSE has been about 3 weeks ago.  I also have a backup car for a few days before failure 'move' files Acronis of C.

  I discovered the problem when you try to run a new full backup: he obtained 76% after 18 hours and created a partial backup of 759 GB more.  The previous backup was only 309 GB.   There were not more than 2 GB of the additions since the last backup.  The only other change I know is the failed 'move' files within the PES of C on the external drive where all other photo files.

  Should I try to simply copy and paste the version the catalog Acronis and replace the corrupted catalog?  Or do I restore previous backup of PES?

  The 'move' failure plant generally not the Organizer. You can check who is a 'movement' of the first Organizer to copy files to the destination drive or a master folder and creates a datasheet to update the database. If the copy process succeeds, then the original photos are deleted and the catalogue updated. If the Organizer not crushed, the result will be a library partly copied, but no change to the catalog. In your case, we can not be sure what happened to the database. As you may have to try a backup, the catalog was usable, but there is a mystery about the 759 GB instead of 309. I guess you already tried 'compensation even when' for the catalog.

  I would first check that the files you want to move have not really moved, and that only a part of them was copied on the destination disk.

  If this is the case, I delete copies (or move them to another locotion than your target location).

  The next step would be to restore the Acronis backup catalog. Remember that the catalog is all the folder containing the database, catalog.pse12db. You can choose to restore to the original location or elsewhere. If outside, double-click the catalog.pse12db file to open the organizer with the Acronis catalog on.

  Report on your progress...

• Error in the application of planning to open in the workspace

  Hi good morning all,
  
  It is Naresh, new Hyperion planning. I had a problem with the workspace by opening the planning process.
  
  My System Configuration is;
  
  Operating system: XP SP2 from the Profrssional
  Database: SQL Server 2005 SP2
  Hyperion Version: 9.3.1
  
  Initially, I created the Admin user in shared services, and I have given enough inorder of roles to create a planning application in the workspace. Then I logged in the workspace, successfully created a planning application to help administer-> Classic Administration-> management planning process.
  
  I am connected to shared services, able to see the newly created application. I gave all the roles under the application (NarApp) to the user (admin).
  
  Again, I logged into the workspace, attempted to open the planning application (NarApp) to navigate-> Applications-> planning-> unexpected NarApp, I get an error as follows:
  
  Online: 693
  Char: 5
  Error: ' getHandlar(). PlanningMenuBar' is set to null or not an object
  
  
  Even I checked the properties file: Hyperion\deployments\Tomcat5\workspace\webapps\conf\context.properties.
  
  Please someone help me in this regard. I want to open my planning application in the workspace.
  
  
  Thanks and greetings
  ==========
  Naresh.M

  Hello

  XP is only officially supported for client components not the server, I recommend using an operating system that is supported only if you do not want to meet as many problems.
  You should be fine with windows 2003.

  See you soon

  John
  http://John-Goodwin.blogspot.com/