change to Picture It Photo 7.0 does not work in Windows XP
I was using microsoft change to Picture It Photo 7.0 for years. I'm still usimg floppy disks. When I start everything opens and I am able to work with one or two discs, then I start the habit and the error messages I would like to go further. What I do need to update something or is it because the disk being obsolete. ? I need to remove photos in readers so I can use again them and all of a sudden is not allowing me to do. I'm not a whiz guess computer you can only that out because I'm still playing with the readers. I need a simple explanation of what I need to do.
Picture it 7.0
OS: Windows XP
Hi ayaphilomene,
- What are the error messages that you receive?
I suggest you use another program to open the content on floppy disks and check if it helps.
If you only want to remove the images to floppies, the best solution would be to format floppy disks to remove the photos inside.
Make sure that you have the backup of the images to floppies before you proceed with the format.
- Insert the diskette into the floppy drive.
- Open my computer and then right click on the floppy drive and click Format.
Tags: Windows
Similar Questions
-
I am trying to open raw photos and it does not work I have 6 suites and photos taken on a Canon EOS Rebel SL1 creative
Hi irod,.
Greetings.
- Latest version of camera raw for CS 6 is 9.1
- Check now if your camera is to 9.1 or higher
- If requires 9.2 or later, then you should switch to PS CC or use the dng converter
- But if it is support less 9.1 then use this link to install camera aw 9.1 and then try to open pictures
- If still you have questions then please paste a screenshot of the issue in more detail.
Concerning
Rohit
-
Hello.
When I try to change the settings of iTunes store password does not work: System doent recognize the apple ID account password
Sign out and then sign in again the apple between the device and what not ID recognize the password very well, but when Im going to change all password parameters, system ask me the password again, I write and ask again... n times.
I tested in different devices, iphone and ipad, with two different accounts and beta of ios 9.2 and 9.2.1. Still the same error.
The problem is that when I try to download a free app from app store ask me the password and does not work so I can't download any new script.
Thanks for your help.
Best regards.
Hello bdepaco,
Thank you for using communities of Apple Support.
I see that you have any questions, change your password ID Apple via iTunes. Have you tried to change your Apple ID account page? Take a look at the following article for the steps:
Once you have changed your Apple ID password, it presents a few additional measures to be taken.
What to do when you have changed your Apple ID email address or password
Best regards.
-
I installed the German version of Photoshop, now I need the version in English for some actions, that I bought. In Photoshop preferences is German and I can't change to English. I changed my Creativ cloud in English, but does not work for Photoshop. What do I need to reinstall Photoshop in English?
Also if you wish, you can take back to the top of Presets, plugins... before uninstalling.
-
I tried to change my e-mail address and it does not work, I need to contact support to change it for me
Hello
Please get in touch with the customer: -.
* Be sure to stay connected with your Adobe ID before accessing the link above *.
-
Acer Aspire 5536 Webcam does not work with Windows Live Messenger
My Acer Aspire 5536 laptop with built in Crystal Eye webcam does not work on Windows Live Messenger. Open the application of webcam Crystal Eye went very well, taking pictures is fine, until I want to use it in a conversation on Messenger. Is there something I can do?
A quick response would be much appreciated.
Hi Tom Hawx,.
(1) if it works well before?
(2) remember to make changes?
(3) you get an error message?
You can follow the steps mentioned in the article below to configure settings for audio\video Messenger.
With the help of your LifeCam with Microsoft Live Messenger
http://support.Microsoft.com/kb/921332
(Article applies to deliver the LifeCam, works very well for the issue)
If the problem persists always, for more expert on this issue, help post your query on Windows Live Forum.
Windows Live Forum - http://windowslivehelp.com/
-
Less than two months ago, I upgraded my HP Jet Windows 7 to 10. Over time some questions popped up (random apps that could not be opened, etc.) so I decided to do a full reset, deleting the files from the user. Once the 'install' process is complete he brought me to the initial configuration for Windows 10 screen, asking me my keyboard and language preference. He would not accept any contact entry. I rebooted it and he went to the advanced configuration where I could use the touch screen to do a complete reset. That has not changed anything. I found the info on the HP website and did a reset of the BIOS. That has not changed anything. I got an OTG cable, but was not able to get a keyboard work. I did, however, get a mouse works and has managed to create a new user and login. However, the touchscreen does not work in Windows. I was able to get into the settings and looked at the Device Manager settings. There was only a mouse driver listed under Human Interface. I also noticed a number of question marks in the subtopic of the processor drivers.
I was able to use the OTG cable to try to re - install Windows 10 from a USB key. When a similar initial settings (language, keyboard) screen broke, I couldn't use the touchscreen. Later, I created a USB with Windows 8.1 thinking he might have a better chance. The same problem. He does not touch inputs. And with a key USB installed via the OTG cable, I can't launch a mouse at the same time.
It is strange that I have not the problem in the BIOS or advanced startup options. It seems that there is a corruption somewhere, but how do I fix?
Hello Moronihah,
You did a clean install (delete all files and programs) the 2nd time you reinstalled Windows 10?
That's what you need to do first.
Then, you have to go to the HP website and install the drivers on your USB.
Above all, you need to include the Goodix Touch Controller Driver and pilot, allowing Malta G-Sensor.
HP Software and Driver Downloads
You're using a hub 4 ports with your OTG cable? Which will allow you to use the mouse, the keyboard and the entire USB drive.
-
Touch screen does not work in Windows XP - Portege 3505
Hey
Anyone know why the touch screen on my portege 3505 does not work in windows xp?
A lot of cheers
Steve
and no one knows what you have done or installed on your laptop?
Sorry about that, but who need to know that? Have you changed something on your laptop >
Did you install a new OS? Have you used the Toshiba recovery image? -
Qosmio G30 - Media center remote control does not work in windows
Dear all,
I have a Qosmio G30-194,
first I had a problem with VGA, send it for repair, when she comes back, I noticed that the remote does not work on windows Media Center, while that in A / mode V work perfectly.I tried a full system recovery DVD restore, but nothing has changed, even, I installed Windows Vista with all its pilots.
Nothing has changed too, I borrowed a USB IR received for another remote that it worked perfectly with my remote on windows.Please advise me what to do, should I send it to the service center, or there is an easier solution.
Mazen h
NB:,: my laptop info are:PQG32E-01P018AR model number
Thanks in advance
Hello
> first of all, I had a problem with VGA, send it for repair, when she comes back, I noticed that the remote does not work on windows Media Center, while that in A / mode V work perfectly.
If you had a problem with the VGA chip then the whole motherboard has been replaced.
Maybe it has something to do with your problem.Anyway, as far as I know you don t need any special drivers if you want to use the MCE Remote control. For the use of the remote control with Qosmio player you need to connect a USB infrared.
-
Qosmio F50-126 - Subwoofer does not work in Windows 7
My subwoofer does not work in Windows 7.
I installed the audio driver Dolby Digital... Basically controls the bass.That didn't activate it because I don't think the pulse of air, that I used to get under Vista. What driver am I missin?
I don't have this model laptop but it will be interesting to know if you have that you compared the sound settings in Vista and Win7?
Can you change anything to make box works properly?AFAIK there is no special driver for subwoofer features.
-
Direct3D devices does not work on Windows XP
Direct3D devices does not work on Windows XP
Hello1. what exactly happens when you try to access Direct3d devices?2. you get any error message?3. If it works well before?4. don't you make changes to the computer until the problem occurred?I suggest you to follow the steps below and check if it helps:
Method 1: Try to uninstall and reinstall the Direct X on Windows XP:
Here's how:
a. open the registry editor by running Regedit from start > run.
b. then, navigate to the following registry key.HKEY_LOCAL_MACHINE\Software\Microsoft\DirectXc. here, delete the DirectX folder, exit the registry editor and restart your computer XP.
d. when starting the system, after the reboot, your system will be reinstall DirectX 8.1 which is originally preinstalled Windows XP operating system.
Once it is done the upgrade to x 9 live.
http://www.Microsoft.com/downloads/details.aspx?FamilyId=2DA43D38-DB71-4C1B-BC6A-9B6652CD92A3&displaylang=enRegistry warning:
Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
How to back up and restore the registry in Windows: http://support.microsoft.com/kb/322756Method 2: If the problem persists, then try to install the latest graphics driver from the link below.Hope this information is useful. -
Alt Gr does not work on Windows 7.
With the help of the Windows 7 fresh installed.
- The "Alt Gr" is used to get the function of 3 of my keys;
- @ is obtained by pressing 'Alt Gr + 2';
- But it does not work in Windows 7,
- I am no newbie and I changed the language and keyboard for my main language;
- I saw 'Alt Gr' working as 'Alt', to use the @, I need to press "Ctrl + Alt"...
Windows developers are looking for a solution? It is looking like a joke, but how the _ they missed!The keyboard is standard and works well on Windows Vista...I encountered this problem too, but I got a different program to play with me. ASUS GPU Tweak seams do alt + ctrl + 1-9 as a standard keyboard shortcuts, so @------didn't work and made the screen flash etc.
hope this can help, somone
Thanks wabazuzu you helped me to find my problem
-
Auntie ex platforms 1.5 does not work on Windows 7
Original title: mother board interl 61 wwb. Windows xp runs identical to dual-boot
I recently purcahase computer with window7 Home Basic OS with original interl61wwb mother board and 4i3 second-generation 2120model cpu.
my old account package is not currently running-Auntie ex platforms 1.5 does not work on Windows 7. I need to change, or else, I would like the system to dual-boot with Windows xp on window7 home original version on other OS.I WANT TO USE E.G. AUNTIES AUNTIE STOPPED TO GIVE SERVICE FOR EXNEXT GENERATION.DUAL BOOT IS THE ONLY SOLUTION. I M SAID, THE VIRTUAL COMPUTER DOES NOT WORK WITH WINDOWS 7 HOME.HELP PLEASEHello
What is the exact name of the program?
I suggest you to run the program in Windows XP compatibility mode.Make older programs run in this version of Windows. -
Get "key to upgrade is for the edition of windows that does not work with Windows Anytime Upgrade"
The PC is running Windows 7 Starter. I'm trying to upgrade to Windows 7 Professional. I bought the card from Windows Anytime Upgrade Key.
When I entered the PK, error, "put key in level is for the edition of windows that does not work with Windows Anytime Upgrade"
Windows 7 Anytime Upgrade fails:
If your getting the following: error: Windows Anytime Upgrade failed
This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
See: http://support.microsoft.com/kb/2660811= Other reasons and possible corrections.
Windows Anytime Upgrade fails with the error:
"every time that the upgrade has failed. Go online to solve the problem.
http://support.Microsoft.com/kb/2658652If Anytime Upgrade still does not work:
Shut down and restart your computer.
Make sure that the Windows updates have been installed.
Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821
If Anytime Upgrade still does not work, turn off the user account control:
1. go in user accounts in Control Panel
2 change user account control settings
3. pull the slider to the level as low as possible
4. restart the PC
5. pass by the "Anytime Upgrade" as usual
Try the following:
1 disable any security software before attempting to upgrade
2. make sure that your computer is updated (devices and applications)
3. disconnect all external devices before installing.
4. check your hard disk for errors:
Click Start
Type: CMD, according to the results, right-click CMD
Click on "Run as Administrator"
At the command prompt, type: chkdsk /f /r
When you restart your system, your computer will be scanned for errors and will try to correct them.
1. click on start, type msconfig in the search box and press ENTER.
User account control permission
If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
2. in the general tab, click Selective startup.
3. under Selective startup, clear the check box load startup items.
4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
5. click on OK.
6. When you are prompted, click on restart.
7. after the computer starts, check if the problem is resolved.
Also run the Windows 7 Upgrade Advisor:
http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx
Who should I contact if I have problems installing and / or activation of my product key card?
Please contact to the: www.windows7.com/getkeysupport.
If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:
Learn how to install Windows 7 Service Pack 1 (SP1)
http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgradeAdditional resources:
-
My canon s200spx printer does not work on windows 7. I can't find a drive
My canon s200spx printer does not work on windows 7. I can't find a drive
Hello
1. do you have a code error message when you try to print?
2. don't you make changes to the computer before the show?
3. you are unable to find the drivers for the printer?
I suggest for the link and follow the steps in the article:
Solve printer problems
You can also download and install the latest drivers from the manufacturer's website:
Reference:
Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.
Maybe you are looking for
-
Windows Live in Warhammer 40 k with steam
I need a windows live profile to play Warhammer 40,000 online with steam. Try to make such a profile was my worse user experience ever, and I've still not managed. I did a Live user account with my hotmail address and after restarting the game many f
-
I want to upgrade from Windows 98 to Windows 7?
I want to know if I can upgrade from windows 98 to windows 7? I know it's an old operating system and all but I need an update. Can I up to date? With or without him I can internet on it?
-
Smartphones radio Wi - fi blackBerry always off
Can anyone help? I know this may sound a little silly, but I can't turn on my Wi - fi. Whenever I have try and allow it, she said "Unable to switch on a Wi - fi" and "Wi - fi radio is off", no matter what I do, I can not turn it back on. It worked, I
-
I can't download apps because when I go to download the app they ask the my account account/parent family does not only use apps please tell me how to download the app without using my household account
-
Office 365 and App volume 2.10 - accidents open attachments
I'm testing Office 365 (office 2016 32 bits) with App volume 2.10, and so far it seems to work except when I try and open an email attachment from Outlook desktop, I have the "Oops!" Something going wrong message"and it never opens. I can open any at