change/update CD Player for DVD/CD player
I want to change/upgrade to update my CD player on a CD/DVD drive. The system is a HP Compaq D51S, with XP SP3. I don't know if it is SATA or ATA. Does anyone have product suggestions/recommendations.
Hello:
Sorry I posted the wrong link above. I thought I did.
Please see below.
Choose the one you think you want to perhaps the biggest part of the lot.
Read the comments.
If it was me I would get this one because it is decent and comes with the software.
http://www.Newegg.com/product/product.aspx?item=N82E16827106328
Paul
Tags: HP Desktops
Similar Questions
-
How to change the region code for DVD ROM on Acer Vista
See the title, I don't ' want to rewrite this, once again. Thank you
* original title - my computer won't let me change the region code for my disc drive. I have two different with region 1 and 2 DVDs. How can I change at will? Help! Good grief! My laptop is an Acer with windows vista.*
Hi Shakira R.
Please see the following article with useful information about your question:
http://www.Microsoft.com/windows/windowsmedia/KnowledgeCenter/mediaadvice/0072.mspx
I hope this helps!
Debra
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
Update of firmware for DVD - RAM Mat * a UJ - 841 S in Satellite M40-265
Hi all
I had a problem:
My M40-265 Satellite integrated mast * a DVD - RAM UJ - 841S by car.
In fact, it should be able to burn DVD - R 8 x.
But that it burns only 2 x atm.I already changed the manufacturer disk 3 times.
And the discs can be burned x 16 to 2 other PC...It's really annoying because I spend a lot of time, 1 single dvd burning...
I need a Firmware update.
But the only updated, I find, is actually for VAIO Laptops... .it does not work.
Can you help me please?Thank you!
Best regards
HenningHello
the problem is, the carpet * a readers are a bit complicated regarding the FW update and burning speeds.
Have you tried Verbatim and TDK? Carpet * a readers want to be fed with very expensive disks that has nothing to do with toshiba, rather (and sadly) something with the manufacturer of this drive. :(
You can do the following:
Try initially to these sites:
Driver DVD-RAM for your car
http://www.bhacorp.com/download/utilities/DVDRAM.htmlFirmwareupdate for your car
http://Forum.RPC1.org/dl_firmware.php?download_id=2244But I recommend using BEST discs for burning. So I solved my problems of speed with a carpet * player.
Welcome them
-
Do I change the flv. files for DVD maker
You tube videos in flv format. are not accepted by the creation of DVD.
Can what type of file I change the flv from youtube. files to, be accepted by the creation of DVD?
Thank you
Hi delron.
· What is the version of Windows installed on the computer?
You can convert YouTube video files to AVI or WMV format to burn the videos using Windows DVD maker.
Convert music, videos and photos from one format to another
Burn a DVD-video disc
http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-DVD-video-disc
-
I can't watch DVDs on my computer it say I need some update the driver for the video card
I can't watch DVDs on my laptop it tell me I have to install a driver for the video card update
Hello
It seems that you try to update the drivers for DVD. I offered to you to update the video card reader.Try update video card driver.See also: -
How can I change the regional settings of DVD?
I changed my regional settings more than the necessary time and they cannot be changed more then l can not look at some of the l have.how dvd can difficulty be multi regional dvd player?
Hello
Well, as I know it possible s only 5 times to change the regional settings for DVD,
then the area code is no longer editable. :(
See this topic:
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=7631&MessageID=26496#26496Good bye
-
System configuration: Windows XP with SP3 (Original) and all other Microsoft updates. An engraver of DVD from LG (HL - DT - ST DVDRAM) - SATA & Samsung DVD writer (TSSTcorp CDDVDW SH-S222A SCSI) - PATA later do IE August 2010 & September 2010 with the latest firmware, Nero 8.
On a previously written DVD Insert, complete correct IE fully functional in other dvd burners / rom, DVD RAM icon changes to CD with two blank CD showing player one and not accessible with the message above in the other happening too the DVD-RAM to CD drive.
Not understand, reported the problem to the company service centers assuming failed drive to be replaced during the warranty period. Provided with other drives of different model but unfortunately same case again. Searched the Internet, consulted and I have tried all sorts of remedies, but without success. Although all CDs, written or purchased fully functional, only previously written DVD.
Then tried the solution of Microsoft Solution Center as "Mats_Run.dvd". Same here as that 'Please insert media readable by the CD/DVD drive [I:]. Windows tried to open the CD/DVD drive for you. "and finally as ' media in the CD / DVD drive is not readable (TSSTcorp CDDVDW SH - S222A SCSI CdRom Device' with the status"not set".)
Wasted a lot of money and time behind this problem try this this, but without success. So looking forward to you for that my major problem not identified as an emergency like with me for needing to use these data. Again, no problem at all on my side of the machine and quality DVD that are required to access. And kindly, as soon as possible. Thank you.
Lately, just after the announcement of this problem, insert a blank DVD to check DVD writing. And yet even ONCE - DVD RAM changing to CD player in both and in the above statement PATA and SATA a blank CD. Sense DVD is not reading as well as writing. Please add this also.
Hi Sreeparno Baksi,
Try the methods below:
Method 1:
Uninstall Nero 8 on your computer. You can check the link that help you with the steps to uninstall program to add or remove function below: how to change or remove a program in Windows XP: http://support.microsoft.com/kb/307895
Method 2:
Delete manually the filter upper and lower filters from the registry editor. See: (Section: fix it myself: your CD-ROM drive or DVD drive is missing or is not recognized by Windows or other programs:http://support.microsoft.com/kb/982116 )
See also the link below: Advanced Troubleshooting for issues that occur when you are installing a new CD or DVD drive in Windows XP: http://support.microsoft.com/kb/314096
With regard to:
Samhrutha G S - Microsoft technical support.
Visit ourMicrosoft answers feedback Forum and let us know what you think.
-
A satellite - not enough video memory for DVD player
When executing my windvd Invtervideo player, I get an error message that says "Not enough MΘmoire for dvd player" which is the benchmark for this? also the sound experience of parts multimedia player dvd but no video Please help!
Hi, mate
you only post us a lot of information on your laptop. I can hardly believe that there is not enough memory to run it. What happens if you try to the CyberLink PowerDVD program. You can also try update video codecs. Download K-Lite Mega Codec Pack
-
Can satellite A350 - I change the media player on CD/DVD button?
Is it possible to change the media player by default on the CD/DVD of the service/media keys button?
The default is Windows media player and I want to change it to VLC player or itunes...
Hello
I checked the manual of the Satellite A350 and I founded the following information:
Toshiba Button Support: This utility controls the following computer button functions: cut the buttons and CD/DVD. The application of departure since the button can be changed.So for me it sounds like this it of possible to change it.
On my Qosmio laptop I can change this if I start the Toshiba assist, and then you can choose the Toshiba button support. Here, you can register another application.
Check it!Welcome them
-
Since the administration guide, I execute the following commands on a remote host to install flash player. However, the command stalls waiting for "Update Flash Player Preferences" dialog box to decide. I would like to run this command on a remote host and have to install without any warning. Are the other arguments to the "'Adobe Flash Player install Manager" another that '-install ', something that is really quiet? "
Silent installation of Flash Player (using Installer .app bundle)
To silently install the Flash Player 11.3 or later on Mac, follow these steps:
1 extract the bundle to install Adobe Flash Player (install Adobe Flash Player.app) of the. DMG file.
2 open a terminal window and change to the directory where the .app file is saved.
For example, if the .app file is saved to the desktop of the current user, type:
CD ~/Desktop
3. run the installation program contained in the .app file using the following command:
sudo. / Install Adobe Flash Player.app/Contents/MacOS/Adobe Flash Player install Manager.
install
4. type the password to continue the installation.
Thank you.
Hello
You experience this behavior because you use the installer online, download and install Flash Player silently in background, but requires also the user to provide the option to update. Setup Online is not intended for the distribution of the company. Distribute Flash Player within your organization, you will need Flash Player (usually free) licenses for distribution. Apply for a license, go to Adobe Flash Player Distribution. Adobe and complete and submit the form. After application, you will receive an email with a link to download installers for the distribution of the company. This includes installers .app both .pkg you can use. None of these prompts to update the options during installation in silent mode.
I apologize for not noticing this before, however, I assume that you did not use the installer online since you were distributing Flash Player within your organization.
--
Maria
-
How can I change a default install for Flash Player/ActiveX directory
Hi all
I try to change a default installation directory:
-flashplayer18.0.0.209.msi
-flashplayeractivex19.0.0.000.msi
I run the following command:
C:\Windows\System32 > msiexec /i C:\Users\User\flash\flashplayeractivex19.0.0.000.msi INSTALLDIR = "C:\Test" /qb
The 'Test' folder is created, but completely empty.
so, I can change a destination for Flash Player folder?
Thank you
Hello
You cannot change the default location for installing Flash Player. Flash Player installs in a specific directory and browsers know what directory to locate the Flash Player in.
--
Maria
-
For some reason, I was instructed to update Flash player. I tried but the password was not accepted.
Reset the password to spawn a return to download Flash player
Password not accepted.
WHAT should I do now?
Hi mrse69610920,
It is the OS, not Flash Player to ask for the password. Please read the FAQ what userid & password I need to install Flash Player?
--
Maria
-
I tried again and again to update to flash player, I changed the password I can log into account, but not to update flash player
Hi all
Please see what userid & password I need to install Flash Player? It's the OS that requires the password, no Flash Player.
--
Maria
-
I tried to update flash player and when I put my password, it is rejected. I changed my e-mail and password and notice to adobe, but I am still unable to install the flash player update. How can I update adobe flash?
This password is presented by your operating system and is designed to prevent you from accidentally installing the software.
If it comes to your personal computer and you don't need a password to connect to the computer when it first starts, you can probably leave the password blank and click OK to go to this prompt. If it comes to your personal computer and your normal password does not work, make sure that CAPS LOCK SHIFT is off, and then type the password carefully.
If this is your work machine and he asks an administrator password, well, you will need to have a conversation with your computer friendly.
-
Can you please update the link for the standalone installer of flash player?
Can you please update the link for the standalone installer of flash player?
Link: http://fpdownload.Macromedia.com/pub/flashplayer/updaters/11/flashplayer_11_plugin_debug_3 2bit.exe
Source: http://kb2.Adobe.com/de/CPS/191/tn_19166.html#main_ManualInstaller
Source: http://forums.Adobe.com/thread/889580
Key of dogs says:
Source: http://kb2.adobe.com/de/cps/191/tn_19166.html#main_ManualInstaller
It is an old document (Flash Player 10.3) that should not be there anymore. (The English document redirects to the link below).
Download links for installers for FP 11.2 offline are here tall_in_a_firewall_proxy_server_environment http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-windows.html#Ins
I've updated the download links for 10.3 FP in http://forums.adobe.com/thread/889580
Maybe you are looking for
-
Can I display a menu item 'Organize bookmarks' in FF 10?
I recall (although maybe not correctly), there used to be a menu item "Organize bookmarks" FF that is not displayed in the FF 10 bookmarks menu. Is there a way to display such an item of menu? Thank you
-
button line even in the form of Firefox tabs
On my Vista machine, the tabs are on the same line and to the right of the orange Firefox button. That's great. But on my netbook with Windows 7, the tabs appear on the line below. Who loses almost the first line, which has only the Firefox button on
-
to be concerning the resolution of the color it goes blue turquoise to grey on my desk I can't check my record I don't see anything, thanks a lot pour your help.
-
Where is the 32-bit version of the Windows Vista Help files?
where is the 32-bit version of this https://www.microsoft.com/download/en/details.aspx?displaylang=en&id=5143
-
Problems in standard user accounts user access control
Equipped with Vista. Accounts of users within the standard, I can not install any new software. When you are prompted by user account control, my admin password, enter the password and get a response saying the account name or password are incorrect.