change user forum

Similar Questions

• Computer screen laptop black after changing user or shutdown.

  I am running Windows Vista Home Premium Service Pack 2 on an Acer Extensa 4420.  I had problems with my laptop screen.  Whenever we try to change user or shut down the computer, the laptop screen does not illuminate.  I tried something I read on the internet, where you remove the battery and unplug the unit and then put the back and reboot and it worked for awhile but is less consistent.

  I am currently using the computer with an external monitor connected.  I downloaded the latest driver for my graphics card and that didn't make a difference.

  Hello

  ·         Since when are you facing the issue?

  ·         Black screen that occurs after that use the button change user, is what happens when the applications for the user you are currently logged as long as.

  ·         Was it all (hardware or software) changes made to the computer until the problem started to occur?

  ·         Does it happen on any user where you spend one?

  ·         Using a VPN connection?

  ·         What type of internet connection you have?

  ·         Who is the manufacturer of the graphics card?

  You can check if the third-party application is causing the problem. To identify which application can be the question originally, to perform a clean boot on your computer. To configure the boot of the computer follow the link below.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: When you are finished troubleshooting, follow step 7 article to start on normal startup.

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Change user on Vista cut the Internet connection.

  When you turn on vista users (no), IE. Windows key + L, start > change user or Ctrl + Alt + Delete my internet connection drops and I have to reconnect. This happens when I have my LAN cable connected and with my router plugged as well.

  Here's a solution that I met (yay google), but I'm not sure how to create a 'value chain' or the one to choose. (see below)

  Anyone has any info on this topic or other solutions? Kind of a pain in the _.

  At the command prompt, type: regedit

  Registry:
  [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon]

  In this key to find or create a new string value
  KeepRasConnections
  and assign
  1

  Hello
   
  Once you switch user accounts, first open the network diagnostic tool and check what is causing this problem: http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-Internet-connection-problems
   
  The steps you mentioned in the post explain how to edit the registry. Please note that modifying the registry incorrectly can cause serious problems on the computer, causing the operating system to malfunction. Before editing the registry, it is recommended that you back up the registry. See this article to backup registry: http://support.microsoft.com/kb/322756
   
  If you want to run the steps you mentioned, then proceed as follows.
  1. click on start, type regedit and click regedit in the list.
  2. navigate to the following location: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon
  3. in the left pane, click Winlogon and in the do right pane right click in the empty space and click New-> Dword value, name it as KeepRasConnections, note that the string name is case-sensitive.
  4. double-click on KeepRasConnections and in the text box, type 1 and then click ok.
  5 restart the computer for changes to take effect.
  6. check if the internet works fine when you switch user accounts.
   
  I hope this helps.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 10 continues to change user account controls

  Why windows done 10. change user account controls, it's extremely annoying. Whenever I reboot it disables it, which blocks all applications. Why he won't stay where I leave it?

  While I can only say that malware has installed a utility that removes the UAC setting when Windows loading [in the hope that you don't notice the change, and that malicious software can therefore go further by installing other malware without bringing a challenge Admin dialog box].  This problem was reported some time ago and finally diagnosed as a symptom of malware - see Windows 7 UAC (user access control) is disabled on every reboot

  In addition to a full scan with your antivirus installed utility, download and run a scan with Malwarebytes Anti-Malware free [MBAM].  It is much more difficult for malware to hide its presence of two scanners different antimalware.  MBAM can exist alongside other anti-malware utilities, so it won't be a problem.

  Of course, it could be an anomaly in the system instead, but it's not that I've seen reported in this forum before.  Windows has no integrated procedure that changes the setting of the UAC, so it is difficult to envisage any procedure through to cause this symptom.

  Please specify the operating system you are using and use blue change control under your question of re - categorize it as a matter of Windows if necessary 10.

  Good luck

  Denis

• on windows 7 starter edition how can I open an admin account, I have a standart account and I couldn't open any software on computer please help me.even change user account cannot be opened.

  on windows 7 starter edition how can I open an admin account, I have a standart account and I couldn't open any software on computer please help me.even change user account cannot be opened.

  Hi kuentin,.

  Welcome to the Microsoft Answers site!

  (1) - what do you mean you have only 1 user account?

  When you set up Windows, you will need to create a user account. This account is an administrator account to allow you to set up your computer and install any programs that you want to use. And that's why the user account you are using is the administrator account.

  There is no way that you can create an administrator account, or by using a Standard account.

  (2) are you having issues during installation of the software or opening it?

  (3) what exactly happens when you try to open the software application?

  (4) should be codes error or error messages, if any?

  (5) what software are you trying to install or open?

  I suggest you go to the link below and read for more information on user accounts.

  http://Windows.Microsoft.com/en-us/Windows7/user-accounts-frequently-asked-questions

  Get back to us with more information and try out us and help you better with the same.

  Concerning
  Varun j: Microsoft Support
  Visit our Microsoft answers feedback Forum
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows 7 requires using the "CHANGE USER" command to install Server Terminal Services (remote desktop) programs?

  It is necessary (or even possible) to use the CHANGE USER/install and CHANGE USER/execute commands to install a program in a Terminal Server (RDP) Services environment so that it is available to other users via RDP?

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en-us/winserverfiles/threads

  I hope this helps.

• change user

  I tried to run mozilla firefox as always double click and it opens this time a pop came out asking me to select a user, I chose 1 on both I feel like I could have selected the wrong one miss me many of my bookmarks and things like that I don't know how to change user?

  You might have seen the Firefox profile manager. I suggest quitting out of Firefox and beginning with the Profile Manager to see if that's what it was, and you can try the other profile. The steps in this article:

  Use the Profile Manager to create and delete profiles Firefox

  Please do not delete anything in the Profile Manager because it's far too easy to delete the wrong thing!

  Can go back you to your normal settings?

• Windows continues to change user profile folder

  Hi all
   
  I'm facing a real headache. My computer continues to change user profiles folder every restart 2 or 3. For example, my user name is MSF\Bob. The user profile folder has been C:\Document & Settings\Bob. After a restart, Windows create a C:\Document & Settings\Bob.MSF then Bob.MSF.000 and Bob.MSF.001 folder and so on.
   
  Someone has an idea why this is happening and how I can prevent this?
   
  I thank very you much in advance!
   
  Best regards

  Easy question to answer.  You simply have a corrupted profile.

  When Windows detects a corrupted profile, it automatically generates a temporary with names profile as you describe.  Usually, these profiles are deleted when you connect your computer turned off, but not always.  The solution is quite simple.  You just need to recover your corrupt profile.   There are two general approaches.  One is to do a system restore to a point in time before the profile was first damaged.  The other usually involves the creation of a new user and moving profile data on to the new user (you may reset some of your settings).  To do this, choose one of the following articles and follow through:

  "How to recover damaged Windows XP user profile"
    <>http://support.Microsoft.com/kb/555473>

  "How to copy data from a corrupted to a new profile in Windows XP user profile"
    <>http://support.Microsoft.com/kb/811151 >

  "Windows XP problems if your profile is corrupted"
    <>http://support.Microsoft.com/kb/326688 >

  HTH,
  JW

  PS: Corrupt profiles are almost always accompanied by alteration of the disc as well.  After your recovery, perform a check disk (chkdsk) with the "/ R" or "/ F" option

  "How to perform disk error in Windows XP check"
    <>http://support.Microsoft.com/kb/315265 >

• After the last update of xp, we have not been able to change user without password. What do we do?

  Original title: change user

  After the last update of xp, we have not been able to change user without password. We do not know the password. What can we do?

  See if that helps...
  Cannot lock a "locked" computer administrator
  Be sure to check your screen savers.

• nothing happens when I click 'change user '.

  Followed the steps in the PANEL re switching users, still no response. Tried the strikes and am, you are prompted for a password that does not exist.

  No, cannot always change username.
  I want to be able to change user without disconnection.

  The keystrokes I made reference are other suggestions to change user: windows logo + L.

  Absolutely nothing happens.

• Homepage with/bcmwltry.exe alone. Cannot change user?

  I disabled the checkbox on the cache. Now I can't login because I'm an error/bcmwltry.exe. How do I change users so I can re - check cache? I can't do anything. This is what facebook told me to do when I didn't have a gift in my gift box. Stupid of me, I can't have any other user except me and I'm an administrator, but I have another admin also account, how do I get so I can undo what I've done? single woman seeking man alone to work

  You can get the default Administrator Windows XP created when you installed everything first, or when it has been installed.

  To do this, restart your computer and press F8 repeatedly until you get a boot options screen.

  You want to use the arrow keys (the mouse doesn't work here) to select "start in safe mode".

  Press ENTER.

  You will come to the login screen and see a new administrator account.

  Click on it, do not fill in the password and press ENTER.

  This SHOULD allow you acess in the computer where you can undo what you did......

  Young people and learning... Have mercy - Chaos if this post solves your problem, please click 'Mark as answer' or 'useful '. This helps other users having similar problems find the answer faster.

• I bought my computer from someone else. Change user accounts did not name of each file in the computer. How can I change or remove the user/name (my name) /document? __

  I bought my computer from someone else. Change user accounts did not take their name off of each (or more) file in the computer. How can I change or remove the user/name/document
  I have looked everywhere and changed user information and the name of the administrator. What can I do else?

  Hello flashgordonjxn,

  Who has ever done the installation of Windows, the installation program asks you to enter your name and optionally, the name of the organization. These registration information appears under recommended for in the general tab of the System when you click Start, click Control Panel, click performance and Maintenanceand then click System.

  To change see instructions below:

  1. Click Startand then click run.
  2. In the Open box, type regedit, and then click OK.
  3. Look for the following registry key:
     HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion
  4. To change the name of the company, follow these steps:

     In the right pane, double-click RegisteredOrganization. Under value data, type the name that you want, and then click OK.

  5. To change the name of the registered owner, follow these steps:

     In the right pane, double-click RegisteredOwner. Under value data, type the name that you want, and then click OK.

  6. Click Exit on the file menu to exit the registry editor.

  Hope this helps you. Let us know anyway. Make it a great day!

  "And in the end the love you take, is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

• How can I create a shortcut to "change user" on the desktop using rundll32.exe in Vista Home Premium?

  I am trying to create the shortcut to "change user" using rundll32.exewithout to create the shortcut to "lock", only to pass the user. I already know that I have to right click on an empty space on the desktop, press New\Shortcut and type%windir%\System32\rundll32.exe user32.dll,but not after the comma. Type so I can only create the shortcut to "change user" and not the shortcut to 'lock '? (This means that I don't want this: %windir%\System32\rundll32.exe user32.dll, LockWorkStation, with LockWorkStation after him.)

  Unfortunately, it can be done in your version of Vista (or so they say, hang on a moment.)  I found the article according to that cllaims to do in Vista Basic and Vista Home Premium in addint a file and shows a set of procedures.  As it is a 3rd party file, do so at your own risk. http://www.vistarevisited.com/2008/08/02/create-a-desktop-shortcut-to-switch-users-in-vista/.  NOTE: This is not how you suggested higher, but if it works who cares?

  In case you don't want to consider the solution above, you have refused, here is the procedure (how to do it in other versions of Vista):http://www.vistax64.com/tutorials/136969-switch-user-desktop-shortcut.html.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Change user, Windows Remote Assistance

  Far too long, but for a long time it is not enough for our computer has suddenly lost the "Change user" button in the start menu of Windows Vista PC (Pavilion Slimline), our family edition. I tried to find out what causes this malfunction, and then it brings up something "Windows Remote Assistance. Then I typed in that and my computer said that it allows emails to HP and the help to friends, instant messaging and more through windows. Well my mother had put in place an e-mail (not through these guys and yahoo) on ourcomputer.

  Can you help me get it back?

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  See you soon.

  Mick Murphy - Microsoft partner

• Change user name

  I misspelled my name when I entered as a user.  How can I correct/change user name?

  This is my computer at home, not a network.

  Start button > Control Panel > Classic view > user accounts > change your account name

  t-4-2