Changed some BIOS settings, after restarting, no visible BIOS on HP Envy h8-1514eo
Product name: HP Envy h8-1514eo
Operating system: Windows 8 64-bit
I've been playing with some settings in the BIOS menu to activate the integrated Intel video card and at the same time to disable the nVidia card. I entered the settings menu to start, I think, and the 'advanced options', I chose 'Device Options '. I don't remember the exact path.
In the "Device Options" menu, I changed the following (the previous values are in parenthesis):
Embedded video: enable (disable)
Configuration of the PCI graphics:
NVIDIA VGA controller: No bootable (primary VGA device)
Controller Intel VGA: VGA primary (unit Non-boot)
After you save the changes and restart, I can is nothing, only a black screen, see until Windows 8 starts finally. Restart of Windows 8 and by choosing to enter the UEFI boot menu, according to me, it does, it's just that I can't see it. If for example I knocked right 'ESC' key and the 'Enter' key, it starts with Windows 8 new (what I guess, is that I first the "discard changes and exit" which I confirm with "Enter".)
My question is: how to revert the changes I made in the above BIOS as I am unable to see the BIOS menu entries and do not know where to find the options I changed earlier?
Thank you in advance.
Kind regards
Veroslav
Managed to solve it blindly as follows
Hold down f10 during a boot for a while
Assume that "feature" was selected by default.
Has assumed the following file menu structure)
Information System, about, Set Time and Date, apply default and exit...)
Arrow down to x 4
Enter x 2
On the next reboot I got the (visible) start BACK menu.
SOLVED.
Tags: HP Desktops
Similar Questions
-
Change the kernel settings after 10g Software Installation
Hello world
I need to install Oracle 10 g 2 in a box of HP - UX Itanium for an upgrade of Database 9i and 10g and some have recommended prerequisites of the kernel are not defined as requested for the installation program. Kernell settings have been changed in order to fulfill the preconditions but the can´t server be rebooted now because it is a production environment, it will be restartedb in two weeks, but I want to start right now with the installation software.
My question is: safetly can I install the software, and after restarting the server, perform the upgrade of my database?
The kernel parameters that failed were:
Verification of the maxdsiz_64bit = 2147483648; found maxdsiz_64bit = 1073741824. Failure of < < < <
Verification of the maxswapchunks = 16384; no entry found. Failure of < < < <
Checking the semmap = 4098; no entry found. Failure of < < < <
I'll appreciate your help... Thanks in advance!
Alvaro Uribe
Edited by: 865814 01-Aug-2011 13:47Hi Alvaro;
I belive that you can go to to ignore this message on your installation. But after installation you need to restart your server coz if you keep working like this probably will hit you on your db errors
Respect of
HELIOS -
Vista Home Basic - changing the settings after restart
1. I need to use the mouse with my left hand, so I swap the buttons in the control panel. However, If I restart Windows, the keys are not exchanged. I changed the registry key, but I do not do this.
2. I set the control panel to display a list of items, not the icons, but it is up to the icons, whenever I close. I use the classic look.
3. I put the mouse pointer to go automatically to the default button in a dialog box. It does in the majority of cases, but many there no, Notepad for example. I guess it's to do with the show but y at - it a fix for Notepad, for example?
Does he know about fixes for these problems (I have installed all the updates I don't know).
original title: Vista Home Basic - boring bugs
Go to start / Control Panel / file settings / display and check the box then remember each folder view settings. That should fix the problem with the Control Panel views (but to be honest, I'm not sure that it will work with control panel because it is another type of folder - but it's worth a try). If this does not work, I don't know how to get the system to keep the details of opening view (this is the only control that I know to keep folder settings). For what it's worth, this does not happen on my system - when I put on the details and close it, then open it it is still in the Details view. I have 32 bit Vista Business SP2 but I don't think this should make no difference to the same problem.
We will check your file system and hard drive for all the corruption that may cause this problem:
Go to start / all programs / accessories / command prompt, right click command prompt and click Run as administrator (you can skip this step if you are using the disk).
Type sfc/scannow, go and let it run. It will scan and try to correct some of your system files. If all goes well he comes complete with no corruption, it could not repair (if it has these post of corruption here or try to analyze it to find the problem or files using http://support.microsoft.com/kb/928228. Try to put all the corrupt files here so that we can see if they can be repaired with good copies of the installation disc (unless there are too many).
While in the command prompt, type chkdsk /f /r and enter and let it run. It will scan and attempt to resolve any corruption or bad sectors on your hard drive and remove especially as a potential cause.
If this does not work (or or show corruption it cannot repair), the only option I know eventually the problem is repair/system upgrade using the Windows Vista Installation disc authentic (you own or that you can borrow from someone). Here is the procedure: http://www.vistax64.com/tutorials/88236-repair-install-vista.html. Although this will not affect your data, settings or programs, you should always back up your data before you start just be on the safe side. You can have a lot of updates to re - install (including all you need to remove service packs). If the version of the system came with SP1 or SP2 preinstalled and the disc is an earlier version, then you will need to make a record of slipstream as follows: http://www.vistax64.com/tutorials/151606-vista-sp1-slipstream-installation-dvd.html. The decision is yours, if you want to go through that much trouble to fix this (assuming you have the disc).
---------------------------------------------------------------------------------------------------------------------------------------------------------------------
It seems that your left mouse button problem is already solved by changes to the registry. I don't know why it didn't keep its settings just to configure in Control Panel - that's what's supposed to happen (not what happened to you).
The other problem with the mouse can be a problem with the individual programs (such as Notepad) or since you have detailed two separate problems with the mouse, it may have something to do with your mouse, software, firmware driver (or your mouse with Vista compatibility). I would go to the manufacturer website and download the latest versions for your system and compatible with your version of Vista (making SURE it is compatible with Vista) and install them (or reinstall if you already have this version here). There may be something to do with these elements to reinstall trouble.
In Notepad, there is no solution for this problem. There is no separate for Notepad - download this is the part of the operating system and re - install you will need to re - install the complete operating system (and who may not even solve the problem). What you said about it being a problem specific to the programs is probably correct - especially if she does not work in most of the programs (and I've never seen a mouse pointers control feature in any program I have ever used - it is assumed that is controlled globally of the settings in the control panel).
Sorry, this was not in fact of great help (unless the mouse, software drivers and firmware option works).
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
Cannot change some Bios settings
Hi all:
I use X 220 with Archlinux.
I want to enable VT - X in Bios.
I found the settings
It is disabled.
But the values are gray and cannot be set.
What can I do?
Thank you
-
Losing files, programs and settings after restart of the system or of the judgment
Whenever I restart or star - with respect to a previous stop, restarting my laptop with programs and missing files. The only way to solve this problem is to restore the system several times until I have the chance. Why is this happening?
Hello
It seems that the profile does not work correctly then try these methods to solve the problem.
1 do these to erase corruption and missing/damaged file system repair or replacement.
Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html----------------------------------------------------------------------------
2. you can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
Mode has no default password (unless someone has changed the password so it should be available).Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
has been known to cause this problem.Error message when you log on a Windows Vista-based or Windows 7 using computer a
Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
http://support.Microsoft.com/kb/947215How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.htmlHow to fix error "your user profile was not loaded correctly! You have been connected with a
temporary profile. "in Vista
http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.htmlBE VERY CAREFUL IF YOU USE THIS ONE:
DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.
How to enable or disable the real built-in Administrator account in Vista
http://www.Vistax64.com/tutorials/67567-administrator-account.htmlUse the Admin account hidden to lower your user account APPLY / OK then wear again to
ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
above message.You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
password (or two with the same password) use a test or difficulty to another.You can run the Admin account hidden from the prompt by if necessary.
This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxIf you cannot access your old account, you can still use an Admin to migrate to another (don't forget
always leave to an Admin who is not used except for testing and difficulty account).Difficulty of a corrupted user profile
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspxI hope this helps.
Rob Brown - Microsoft MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
Changing the unexpected settings after update
HI - George here in Rhode Island.
I have Windows 7 Ultimate 64 bit and whenever I do a "reboot" or (I think) an update causes a reboot; my 'games' (hearts + Spider Solitaire) revert to the default settings. The "Display-bubble" option is checked and all the names of the other players return to the "North-South and West. No other user profile settings are changed.
I know that this is a trivial question, but it's driving me crazy! I found a reference to this line that suggested Roxio Creator may be the cause, but removal of Roxio did not fix the issue. I tried to reinstall the operating system without success. The only thing I found which may relate is an error in Event Viewer
7000 0 2 0 0 0 x 8080000000000000 27991 System GW - PC SessionLauncher%%d KoLinks on the error '0 x 8080000000000000' do not seem to help.
Any help or information would be appreciated.
Thank you
HelloMethod 1:Perform the clean boot and check.
To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7Note: See the section step 7 above to start the computer by using normal startup after you have performed the steps in troubleshooting.Method 2:Method 2:
Scan a file system (CFS) checker on your computer and see if that fixes the problem.SFC tool scans system files and replaces incorrect versions of system files by using the correct versions.How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833Method 3:I suggest to create a new user account and see if the problem still occurs, follow the link:Step 1: Create a new user account.http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account
Step 2: If the problem does not persist in the new user account, try and fix the damaged user account following the link:
Difficulty of a damaged user profile
I hope this helps.
-
Can you change R3D Source settings AFTER a fall in the timeline?
I take more than one editing tool that's been set up by someone else. They imported R3D images directly in the creation and dragged into the timeline without changing the settings of the source.
My problem is that I have a minute thirty-five long edit lots of images that cannot be color corrected from scratch. All this has this base of R3D top rank. I'm trying mode gamma on the set of clips already on THE TIMELINE.
Is there a possible way to do it?
Just follow the steps below, please do not use exposure on Lumetri color Panel.
First to use exposure on the Source settings instead, it works for me hope it will be useful for you
-
2 sites in particular when I go to old-time TV stream, my movie site is ok, youtube is ok, all plugins are up-to-date, I reset firefox, restarted and all it all that regular but still these 2 sites will not broadcast my video
now it's all links on the sites given, I tried everything, maybe that it's related to gave 2 sites, one being 'watchseries.ch' I don't know, all the input is appreciated. At this point, I can just wait a day or two before you try something else and see if it is these particular sites.
-
Touchpad does not retain the settings after restart on satellite series
the touchpad on my equiem is too sensitive, I can adjust and works very well for this session, but when I reboot it refers by default, I have saved the settings etc. but will not always be together
Hello
He s strange and not usual.
Have you tried reinstalling the driver for the touchpad?
Try to download and install the latest version of the driver for the touchpad Synaptics Web site of the and repost it please the results. -
How can I change regional settings after connection Wi - Fi was made on my xbox 360
How can I change the locale of my xbox 360 after connection Wi - Fi has been made
Hello
You can check the link:
How to set up your Xbox 360 console locale
http://support.Microsoft.com/kb/906497
Note You can't change your regional settings, if you have enabled the family settings feature. The language setting is integrated with the family settings feature and wireless network settings. Change the regional settings can change the wireless network settings. We recommend that you do not change the regional settings after you set up your wireless network.
If you encounter problems after you change the regional settings, you can contact your ISP for assistance.
Hope the information is useful.
-
Tecra M5: external PS2 keyboard only works after restart
Hello
I have a Tecra M5 with a Port Replicator III Plus. I plugged a mouse and a keyboard via PS2. The mouse works fine, but the keyboard does not work in the Windows XP logon screen. Just after the restart of the keyboard works.
I tried a few other keyboards, same problem. USB keyboard works without problem. I also reinstalled the mobile extensions and tried to change some BIOS settings.
Someone at - it an idea?
welcome them
Hello
I heard somewhere on this forum with the PS2 mouse problem but doesn't quite describe keyboard problem. have you tried to use the USB adapter like this one http://www.unitedsale.net/products/image-02/USB-to-Dual-PS2-01.jpg?
-
Change the import settings when the Tag window is disabled
Hello
When changing the parameters to import by mistake, I chose only not to ask for the name of tag in import.
Now, I want to change the import settings. Now, when I click on import Image and videos I'm never able to see the screen of tag I can change the settings to import again. It begins to import images and videos very quickly and not giving the time similarly hit the import settings.
Any help would be appreciated.
Thank you
I found a solution that worked for me!
My problem was when I tried to change the import settings after inserting my memory of cameras
stick. It offering me the opportunity to go to import the settings. If I could change the location
imported illustrations...After scanning a document to save (nothing to do with) image + video import dialogue box shows
To the top! And does not immediately start importing, so I was able to click on the import settings and get
the dialog box import settings.I clicked on the parameter area for the scanner and I get a choice of devices to change the settings of.
Cameras and portable is here. !! By clicking on that gives me the window I can ck the __Prompt of the box for a tag on import.
I do this press 'OK '.Then I get a box of photos and videos to import saying for these changes to take effect, import pictures and
videos will now be restarted. Click on 'OK' to find
Scanner: Operation is not successful the device is not ready. I click 'OK' on this boxAfter that, I will go back to load pictures from my camera memory stick and import of images + videos box
remains on the screen, so I'm able to get import settings.I hope this works for you... I tried to solve this problem for weeks.
(Meaning 3 days after I got my new computer windows7)
with no help from chat for hours with HP support and many requests for help from microsoft answers.Hope that gives you the answers you need... I would like to know if this is the case?
Wes
-
I have some changes to cookies and erased my story for today... and then restarted my computer... now that firefox does not open... will not respond... should I uninstall firefox and then reinstall?
If I uninstall firefox will be reversed the changes I made with cookies and my story?
If I was to uninstall and reinstall firefox will lose my bookmarks if I do this? or firefox remembers them... so when I reinstall the previous bookmark is too reinstalled?
Is - this Firefox starts when you open first after the computer restarts, but crashes the next time that you try to start? If Yes, then there is a bug in Firefox 29 where Firefox crashes out when the parameter ' delete history closing Firefox "is selected, so that you get an error" running but not responding do not "next time you ttry to launch. In this case, end the firefox.exe process in Windows Task Manager (or restart the computer) and then reset your Firefox Privacy options and UNCHECK the option «Clear history of Firefox closing» See this article for more details:
Privacy, historical settings of navigation and-no-trackIf this isn't the problem and Firefox still open even after restarting the computer, then try to boot mode safe of Firefox by holding down the SHIFT key when you start Firefox. If Firefox starts then read Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to narrow down the cause.
-
Satellite Pro L40 does not start after changing the BIOS settings
Changed some settings in the bios last night and now when I boot I get a screen black lights flash and hard drive lights up but nothing on the screen.
There is no password on the bios... How would a BIOS reset to normal?
I put a windows disc now, I hear the disc spin but nothing on the screen
(I think that I have come to the right place on the forum)
It s a Toshiba Satellite Pro L40 model psl4be.
Thank you
> There was no bios password... How would a BIOS reset to normal?
You can set the default BIOS ONLY inside the BIOS access BIOS by pressing F2 or at the beginning of the initialization of the order
But I doubt that this problem is related to the BIOS.
Maybe it s just a simple bad luck that this problem happened exactly after change something in the BIOS.Try connecting an external monitor and check if you can see something on the 2nd screen.
-
Cannot install Internet Protection software after changing some settings in the laptop.
Hi Expert,
The Technican MS taught me to change some settings in order to solve the problem of Windows Update. However, not able to install McAfee Total Internet Protection thereafter. I have to reset some setting?
Need for emergency assistance.
THX.
Ray
Hello
happy that you guessed it sorted
Maybe you are looking for
-
MacMini &; Sierra: no sound
Hi all I spend my MacMini [mid-2010] to Sierra. Since then, the headphone audio output no longer works. If I choose HDMI or a receiver bluetooth audio external sound works. Anyone know how to fix the audio headphone output? Thank you Tom
-
How can I get rid of yahoo mobile mozilla search
I prefer Google and looking safe yahoo guard reset... it's boring. Thank you
-
How to remove the connection identifier Apple Apps.
My wife's iPhone had previously purchased with the help of a now deleted Apple ID applications. I deleted all original applications under the id now deleted and downloaded under its new Apple ID. However it cannot be updated because the iphone contin
-
Change the default storage drive
Make me relive an old XP computer I used for video editing for my son who has a separate data reader and want to be able to store all your photos and music and all Word documents on this drive. How to change the default setting to store all data in M
-
Pilot Windows 10 for Cisco M10 hotspot
I'm not savvy computer even if this cannot be stated very well. I upgraded Windows 10 when Microsoft has suggested what to do. However, there are two problems when I tried to use Windows 10: I couldn't access the Internet and my Cisco wireless acces