Changes in variable Boolean false on its own

Similar Questions

• 9.0.2 CF multi server config, IIS site uses the connector bad, how do I change the connector to point to its own instance of CF

  Hello

  Yesterday, I found that an IIS site that is supposed to be connected to its own instance of CF is actually connected to another instance of CF. Our configuration is the following

  Windows Server 2008 R2, Coldfusion 9.0.2 Multi server enterprise edition, IIS 7

  Instances of ColdFusion: P1, P2, V1

  Clusters: Primaire1: contains P1 & P2

  Site1 IIS Web site is connected to the Cluster primaire1

  Site2 IIS Web site is connected instance CF V1

  I myself stopped instance CF V1, but IIS V1 site was still running. After much digging, I found this site V1 is not actually connected to the CF P1, an instance of CF V1 instance. I used the web site1 at CF instance V1 connection configuration tool. In IIS the JWildCardHandler site1 points to \JRun4\lib\wsconfig\3\jrun_iis6_wildcard.dll. JWildCardHandler for site2 points to the same directory \JRun4\lib\wsconfig\3\jrun_iis6_wildcard.dll. Here is my dilemma. How can I get JWildCardHandler site2 to point to its own folder under \JRun4\lib\wsconfig, say 14 instead of 3. I don't want to use the web config tool becauseI don't know if it will delete the folder ...\webconfig\3 if another site is still using it. I saw the web configuration tool remove the folder when you remove this connector in the tool.

  So I thought that I would try to manually configure the connectors. That's what I did

  Copy the folder wsconfig\3 wsconfig\14

  en...\wsconfig\wsconfig.properties - ensured site2 exist and referenced instance CF V1

  ...\wsconfig\14\jrun_iis6_wildcard.ini

  serverstore = /JRun4/lib/wsconfig/14jrunserver.store

  127.0.0.1:51007 = bootstrap - 51007 is the port of the proxy that the JRun Management Console is instance CF V1

  ... \wsconfig\jrunserver. Store

  proxyservers = (in file #3 set for P1 and P2 proxy ports)

  
  

  Then, I went into IIS and changed JWildCardHandler from site2 to \JRun4\lib\wsconfig\14 \jrun_iis6_wildcard.dll instead of \JRun4\lib\wsconfig\3\jrun_iis6_wildcard.dll. After you restart IIS sites site1 or site2 came. I went back in and came back JWildCardHandler back to the \JRun4\lib\wsconfig\3\jrun_iis6_wildcard.dll site2 and they both come. I think that I restarted CF both times, but really forget that I was in a bit of fashion panic.

  
  

  Is that what sounds like it should work? Does anyone know of any files that I missed trying to configure site2 to point to the CF V1 instance? Any ideas are appreciated.

  
  

  Joe

  
  

  What I understood why 2 Web sites were using the same instance of Coldfusion. 2 Web sites share the same files, sharing the same web.config file. Change the JWildCardHandler, in IIS, for a website has changed the web.config file that is shared by both sites. If I find a way around it, I'll post my solution in case anyone else runs into this situation.

  Joe

• history has changed to reverse the order on its own; I'm trying to change back to more recent everything first, but he refuses to deliver

  I check AtoZ, but he won't change, and when I click on "views" once again its modified to return from Z to a... Why it does this in the first place? I don't like what he did.

  See:

  • http://KB.mozillazine.org/Preferences_not_saved
  • https://support.Mozilla.org/KB/preferences+are+not+saved

  Alternatively, you can check for problems with the file localstore.rdf.

  • http://KB.mozillazine.org/Corrupt_localstore.RDF
  • https://support.Mozilla.org/KB/toolbar+keeps+resetting

• Re: Satellite L850 changes display on its own

  Hello everyone,

  My problem is that my laptop changes between project options on its own.
  Project options = when you press F4, you see.
  It's really annoying because I can't work when it does 6 - 12 times per minute.

  THX Grini

  To be honest I never heard of something like that.
  What you can try is to enter the BIOS settings and set it to default settings.

  By the way: how old is your laptop? Since when did you notice this behavior?

• R7000 can't access admin page and IP DHCP address range changed on its own

  I noticed recently that my IP range internal from 192.168.1. * to 10.0.1 on its own. I think I got the router configured to auto update to new firmware, so I think that it updated itself and change its settings. When I try to access the admin page that nothing loads. I tried 10.0.1.1 and 192.168.1.1 and nothing comes up. I was wondering if anyone else has had this problem recently. I will be eventually provided to the factory settings and set it back up like that, but I'm hoping to exhaust my options before you go this route. Any ideas?

  I was able to determine the cause. He I warned when you say IP changes when there is a second device with DHCP. I noticed there was some new computers on my network when I watched the network file share. I use the Netgear Powerline device to do wired connections to my living room. What I think has happened is that my recently developed neighbouring apartment unit in place the internet and also uses a feature of current line. I noticed that my DNS suffix changed to a different address, which is the ISP instead of my router. I put 2 and 2 together and realized that my network was overlaps sound via the Powerline. I have never set up an encryption key on the Powerline online so it was still using the default settings and connecting to my neighbors by current carrier. When I added the encryption key, the problem disappeared and my network returned to normal. Next time I should follow the instructions when setting up new network equipment. Oops

• Why the value of my variable resets Boolean false when executing a method of a Bean?

  Hey everybody,

  I use JDeveloper 12.1.2.0.0.

  As the title says, my Boolean variable resets to false when I run my bean class method.

  In my bean class, I have this variable:

  Bank private Boolean = false;

  {} public void onDimStoreSelect (SelectionEvent selectionEvent)

  ...

  Ranger = true;

  FactSalesHUB (selectionEvent);

  ...

  }

  {} public void onDimSellerSelect (SelectionEvent selectionEvent)

  ....

  FactSalesHUB (selectionEvent);

  }

  public void FactSalesHUB (SelectionEvent selectionEvent) {}

  GenericTableSelectionHandler.makeCurrent (selectionEvent);

  If (product! = true)

  matchEmFromJavaScriptProducts();

  If (store! = true)

  matchEmFromJavaScriptStore();

  If (seller! = true)

  matchEmFromJavaScriptSeller();

  If (project! = true)

  matchEmFromJavaScriptProject();

  If (customer == false)

  matchEmFromJavaScriptCustomer();

  If (part! = true)

  matchEmFromJavaScriptCoin();

  }

  If I perform the onDimStoreSelect and after that, if I run the onDimSellerSelect, the value of the client variable is already set to false and it will make my matchEmFromJavaScriptStore() runs when I don't want it.

  Why didn't he stores the value as false since I did in the previous method? Any idea?

  If the problem is not well explained, or it is not well explained just tell.

  Kind regards

  Frederico.

  Try to increase the scope of your beans.  After each request your bean loses value and believe you lose the set Boolean value.

• Why Acrobat does change the parameters in the bookmarks and links on its own?

  Hello everyone ,

  In the last weeks I met a problem that seems to be a bug.

  I used the functions of many times before without encountering this problem.

  The problem is: Acrobat seems to change my settings of bookmarks and links on its own.

  
  

  
  

  That's what I do:
  

  A Word document is converted to pdf using Acrobat / save as pdf.

  Then I open the document in Adobe Acrobat format and make some additional adjustments on how are treated bookmarks, and how pages are displayed.

  For this, I use the menu: file / properties... where I in initial view choose to display bookmarks menu and an entire page.

  Links: for each link, I have activelly chose page to link to and I have this than a whole page to be shown.
  

  But something strange seems to happen to my favorite (and links). Even if I manually change each single bookmark properties (by right-clicking on the bookmark and then change properties), the Acrobat seems to change my settings in "Execute JavaScript", after which pages in my document do not appear as whole pages; Instead, the view is expanded. Often Adobe (and the reader, I tested both) show the zoomed pages so that they fit the frame of the window open.

  What is the problem here? What I am doing wrong?

  This would be a strange bug? Or is there a setting that I happened to change without knowing?

  I have a similar problem with links. Even though I actively chose a particular magnification of the linked page, the program changes the settings on its own. Rather than show a whole page, Acrobat (and subsequently Reader) are suitable for the page on the frame.

  What is the problem here? What can I do to ensure that my personal settings are retained?

  Sorry for my English. I use the Swedish version of the program, so I am only guessing what are the different options are called in English.

  
  

  Greetings from Scandinavia,

  LM

  
  

  I can change the properties of the bookmark without any problem:

  

  

  

  

• each tab seems to get its own window it's design or a bug?

  It seems that every single tab gets its own unique window, now I think that it is ineffective as well as make being organized next to firefox a more difficult task. Since when you close all the windows that hold 1 tab it removes from the main window and the Group menu.

  Now I hope it's just a bug caused by the new, but also great packed feature that the grouping tool is.

  You can try to change some browser.taskbar Pref. * enable on the subject: config to false page.

  I'm not on Windows 7, so I don't know what effect they have.

  Tools > Options > tabs > 'show glimpses of tab in the Windows task bar.

• You will need to stick power button in its own structure of the event?

  I'm studying the Carwash review CLD VI attached.

  First question, I noticed that the Start button is stuck inside its own structure of the event. It is absolutely necessary, I can just paste it elsewhere?

  I guess it was put here because the Start button has no wiring so that it looks more neat to stick in its own structure of the event, I'm good?

  

  Second question, I noticed that the Stop button is already wired into the red while stop the loop, so by pressing stop the vi already. But there is also the change in value of Stop event, sounds redundant, right? Or is it really necessary? ?

  Both are necessary.

  1. the Boolean while terminal read when the event fires. Read this triggered the lock operation (if the button snaps back).

  2. the structure of the event were waiting for an event and nothing would happen until that another event is triggered. Only after that the structure of the event is "run", the value of the judgment is read.

  Felix

• Use ChangeWatcher to monitor the change of variables

  I'm trying to find an easy way to keep track of variables. Is ChangeWatch a good way to do it? I found it is used with binding a lot and quite complicated. Anyone who has used to control a change of variables?

  
  <>
  ' xmlns:MX =' http://www.adobe.com/2006/mxml '
  layout = "absolute".
  pageTitle = "My Page"
  creationComplete = "init ()" > "
  
  Import om.sangari.rpformacao.views.MainWindow;

  [Bindable]
  private var isLogedIn:Boolean = false;

  /**
  * Init
  * */
  private function init (): void
  {
  BindingUtils.bindSetter (isLogedIn_bindingHandler, this, "isLogedIn");
  }

  /**
  * Managers
  * */

  /**
  * __model.isLogedIn BindSetter
  * */
  private void isLogedIn_bindingHandler(value:Boolean):void
  {
  If (value is true)
  {

  }
  }
  ]]>
  

• Firefox has its own flash player so I can delete adobe?

  I would like to know if firefox has its own built flash player, like adobe a safety risk and I would delete it please.
  Thank you.

  Unfortunately, no, for sites that require Flash, it isn't really good substitute.

  Earlier today, Adobe has released an update to solve critical problems, he admitted were in the 18.0.0.203 version. You can get 18.0.0.209 on this page:

  https://www.Adobe.com/products/flashplayer/distribution3.html

  In the first table, find the row corresponding to "browser plugin", and you can use either the EXE or the MSI installer.

  To ensure that the Setup program can remove the older version, either out of Firefox or close all the tabs using the Flash before you do the update.

  That said, the Flash can still have secret flaws that have not yet come to light. In fact, it seems likely enough. Until this ordeal of previously unknown security flaws shakes, you might want to try this and see how it fits. To set the Flash "Ask to activate", after you have reinstalled it, open the page modules using either:

  • CTRL + SHIFT + a
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click on Plugins. Search 'Shockwave Flash' and always change 'enable' to 'ask to activate '.

  Then when you visit a site that wants to use the Flash, you should see a notification in the address bar icon and one of the following: a link in a black rectangle in the page or an information bar slides between the toolbar and in the page area.

  If you see a good reason to use Flash, and the site looks trustworthy, you can go ahead and click on the Lego-like icon in the address bar to allow Flash. You have the choice to allow for a period of time or permanently.

  But some pages use Flash only for tracking or play ads, so if you do not see an immediate need for Flash, feel free to ignore the notification. It will just sit there in case you later want.

• The part of the address of the message writing window TB can cause its own adjustable frame in size as in previous versions of TB?

  In older versions of TB the part of the address of the message entry window had its own adjustable chassis. It was useful that you could develop the image to see all addresses at a time and avoid errors of sending emails to the wrong people, especially when you reply to all and to remove some addresses for example answering users in the company, excluding visitors to learn sensitive information.

  In the recent release you can only see three lines of e-mail addresses and use the scroll bar to see the rest of them, but you may miss the addresses during scrolling up/down. He needs more time to verify that the necessary addresses are there and it is not effective at all.

  Can someone restore the setting of the address in the window of writing? Is there a plan to change this in future versions?

  Please note that I use Thunderbird on Windows XP platform

  Yes! Just below the slider bar formatting changes and you can increase the size of the email address area to see more addresses.

  However, I liked the old style better which was more intuitive. Anyway, there is a way to do the job.

  Thank you very much!

• Almost every day, I leave Firefox open for a number of hours to find it closed on its own during my absence. Why?

  Today, it was a typical day. I was on my laptop Dell electronic control around 16:00 I left the computer connected and powered with Firefox 8.0 still running. When I came back to my computer laptop about 07:20, I found that Firefox had closed on its own. No sign of a crash. It was simply closed. While not a huge problem, I don't like having to restart Firefox. Other applications continue to run when not in service. Why not Firefox? Or y at - it a setting I can use to prevent this from happening? Either way, this happens every day without exception.

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode

• My new Imac 27 inch restarts on its own.

  My brand new 27-inch Imac 3000-buck restarts on its own. I'm under EL CAPITAN - sorry; my profile says Mavericks. Will change now.

  An article said that Spotlight is the culprit.

  In addition, two times I woke up to find my computer had just closed. When I restarted, I got an error message that it had cut because it encountered an error.

  What gives?

  Contact Apple if you are not happy and see what they say (I hope that you have also purchased Applecare) If you are in the period return simply send it back and get another, no point in wasting time when you can return it.

• In the Photos of El Capitan how to record a double published in a separate with its own name and the ID file file?

  In the Photos of El Capitan how to record a double published in a separate with its own name and the ID file file?

  Only by exporting - with Photos (and iPhoto and Aperture) - you can have several versions of an image by duplicating the image (control - D), but this does not create an image file separated until you export - it creates a separate edit list in the database that applies to the original when you watch or export the photos

  Photos as it were its predecessors is a non-destructive control Digital Asset Manager (DAM) which does not any changes to files in the database but built a list of validation

  LN