Changing colorTransform will stop the motion tween?

Similar Questions

• Color change of the motion tween and actionscript

  Hello, I'm pretty new to flash and actionscript, having recently been introduced to Flash MX. Everything flowed smoothly so far. Here's the scenario:
  
  I create a new document and create a symbol of video Clip, then add a motion tween. So far so good. Can I edit the symbol and on the first frame of the clip add action "_alpha = 50";. All of a sudden the motion tween stops working.
  
  You can find a minimal fla file that exposes the issue here: tweenproblem.fla
  
  This problem me totally baffled, that actions like stop(), gotoAndPlay() to the same place and do not affect the interpolation, while other actions of color (for example Color.setTransform) show the same behavior. All reviews are much appreciated!

  Thanks a lot for your time kglad, but I managed to find a workaround for the problem in simply by converting the symbol to a symbol again. It seems that only interpolations in the immediate parent are affected, so the new symbol can be interpolated normally, while the original symbol is still affected by the actionscript code.

• CS4: insert a break between the motion tweens

  Hello

  I use Flash since version 2 and find the switch for the frustrating new motion tweens.

  I've scoured the web, read the tutorials and many of them discuss getting an object from point a to b.

  I just want to move an object from left to right break (no problem) to 20 frames and then slide down.

  I can accomplish a few ways, but it seems much too cryptic steps involved. A solution is relatively easy to implement, but timeline visualization that results is really poor.

  Here are my steps

  1: place symbol on stage

  2: right click on the symbol > add the motion tween

  3: (flash creates for 30 frames tween and playhead moved to frame 30)

  4: I drag the symbol to the right

  5: I manually add a property keyframe to frame 30 via F6 (which kind of lock the instance where I want)

  6: I manually add another property keyframe to frame 50 (the symbol is in the same place, as it was at 30)

  7: I add a regular raster through F5 to 80 frame and drag the proceedings down

  First question is this the right way? Or should I have divided the animation?

  As I said, it works, but my only complaint is that when the symbol doesn't move (between 30 and 50 frames) these frames are always blue. There is no way to look at the timeline and to know exactly where the object is paused. Doing so the old way, this gap would contain gray regular frames and be very easily identifiable. I have been programmed to understand that regular gray frames contain an object that is not moving, blue frames with arrows have... easy motion.

  I am attaching a file that shows the animation I need with a classic Tween and has a layer showing the motion tween, I described above.

  If someone could add a layer to this file with a better method and provide some instructions that would be great!

  Thank you for your time and help

  So, the way you have below is a way to do it for you. You don't need to necessarily use F6, but indeed "lock" the instance (all properties) between these two points.

  Another way to do it (although which gives the same look of timeline), would be to insert a keyframe to the position in the frame of 30 and 50 frame. (Ctrl/Cmd + click, insert keyframe > position, or use the query editor). Which locks the position of these two points, and then you can continue the rest of the interpolation.

  And another way to do this (look same timeline) would be to interpolate however desired, extend the tween, then copy to frame 30 properties and properties of the dough to frame 50. This will insert some keyframes are 30 frame and glue them to frame 50. It is the best way to do it if you have more than one interpolated property. You do not get the inserted additional keyframes (F6), and do not remember what type of key frame to insert (as in the previous way).

  So if you want the appearance of the timeline to change, you can do this. You have the frame interpolation 1-30. Frame 31, F7 and then copy the instance to frame 30 and Ctrl + Shift + V to paste it in place in the frame of 31. Then the rest is roughly the same as with the classics - insert 50 frame images, press F6 to the 51 framework and create the new motion tween.

  We played with the idea of changing the color in the middle of a range of interpolation, but it really complicated me soon with expectations (taking into account is the same instance as opposed to multiple instances of an object, etc.) and what it should look like (several shorter areas, does make sense for the user, what of facilitates etc.), so it was put on hold for the moment. It is something that we are always looking for good, and I'll add your notes to the existing enhancement request.

• Does anyone know of a VI or how to write one that will stop the computers time be disabled if an application is run.

  Does anyone know of a VI or how to write one that will stop the computers clock be turned off if an application is run. The time and date can be reset normally while an application is running by clicking on the time in the lower right of the screen of the computer. I have an application that runs over several days and it is essential that the time and date of the computer not be changed. Is there an easy way of this lockout the user? Note that I am what I consider a beginner advanced in LV

  Thank you

  Chuck

  This isn't something that you can from LabVIEW, because this is an operating system operation, and it will depend on the operating system you are using. Under Windows, you can use Group Policy to control this. Please Google on "prevent changing the date and time of windows."

  Also, please try to refrain from stuffing your message in its entirety in the block of material. Keep short, but descriptive enough topic so we can understand what you're asking basically. Thank you.

• Movement jerky in the motion tweens

  I use the motion tweens in a few simple symbols with SOUPLESE all the way across the screen in Flash CS5. I use not any relaxation or any what actionscript. The problem is that the videos that I export have jerky movement. Shaking is not ordinary, as you would expect of too low a rate. Instead, they are very irregular.

  For example, when I export my animation to a QuickTime movie, it could be three or four tremors irregularly in the film before all the objects on the screen. If I play the movie, I might have three or four jolts of the different places that I had before. If I play again, the tremors are elsewhere in the film.

  I tried different speeds and different settings of Quicktime, but I can't get rid of the jerky movement.

  I have the same problem with the exported SWF files.

  Is it possible in Flash CS5 to get this kind of motion tween (long and smooth movement) to render properly? I mean, it's just too amateur-looking to send to a client.

  Any help would be appreciated.

  There are too many issues going on here, I think. This is how things are:

  If you are using Flash 8, you can export animations of perfect frame rate, but you cannot export the code of conduct of the animations.

  If you use Flash CS3 - CS6, you can export the code of conduct of the animations, but you have little chance of getting the movement completely smooth.

  If you use Flash Pro CC or later, you can get perfect frame rate timeline or code driven animation.

  Shorter long animations within movieclips exporting, you export using the duration option, not the last frame option.

  What KislayCG is referring to, in my opinion, is that if you do real movement of HTML5 Canvas interpolations in time, they can be jerky, which is always the case. For HTML5 Canvas tweens you will get better performance with classic tweens that are not custom acceleration. Custom easing classic tweens will occur as badly as the motion tweens. You cannot export to video of a FLA HTML5 Canvas, so it is not connected to the main theme here, but if you have converted the interpolation of worst jerky canvas to be AS3, it would be nice to play, and even if it was not perfect, it would export as perfect video.

• Text fields with the motion tweens

  Hi, I am building a play on words in which I want to hear a word of a picture to appear in the center of the screen and then move to a different place and be scaled down.

  What is the best way to do it in the OBJECT-oriented programming?

  • Can I create an empty text with TLF text box
  • Transformed into a clip
  • Apply the motion tween
  • Create a class for her .as file
  • and somehow to accept the first word in my code chart

  Am that I on the right track here?

  Advice would be greatly appreciated

  Thanks a bunch

  Images of recommended

  If you want to animate text, particularly on the scale, then you want to place the textfield inside an object which can be resized (textfields generally do not fit as expected).  The text must be dynamic, you need to incorporate the police into the textfield if the text it contains will disappear because of the animation (s).

• I need assistance with the motion tween...

  IM only a frame-by-frame animation and I did the movement in keyframes, but I want the character to zoom through the keyframes. I tried motion tween keyframes full but it zoomed only from the first to the last, without images keys between the two have been progressively enlarged. I know that I can do all the mainually but it will take some time and id prefer not to do it. Is there a way to the motion tween multiple keyframes? (im using CS3 if that makes a difference).

  copy all the images (in all layers) you want to zoom in and paste them in your movieclip.  If you find it is easier to use a chart, move forward.

• Symbol disappears after the motion tween

  Interpolation of my work, but on the frame after the end of the keyframes, the symbol disappears. I was expecting just to stay in place and continue to be part of the image. How to stay on the screen?

  You can in another layer, place the playhead in the end keyframe even then press F9 (to open the code of the Panel) and type
  Stop ();
  
  
  This will stop the movie in this framework.

  Or you can press F5 (in the Tween layer), to "extend the framework of several frames.

  Select with the mouse the images all the remains, then right-click and select Remove frames

  Post edited by: Sujatha PJ

• Problem with the motion tween

  Hello world!

  I have a problem with an own motion tween: I would like to animate an image jpg in this way: at the beginning, it is very a little with a transparency of 0%, and at the end of the motion tween, it has its own dimesion a 100% alpha.

  But, when I try to preview everything works except the piece and it comes out as a white screen...

  I noticed that if I press with the right button of the mouse on the screen to hit the 'play' ("riproduci" in Italian) voice, it shows the motion tween as I wanted and it ends.

  I need your help to understand...

  Thanks in advance!

  I solved it!

  I make this mistake: I chose "click to go to coach and to stop" instead of "click to go to coach and play!" XD

• On the motion tween event listener

  Hi all

  I have worked with Flasg CS4 HAVE 3.0 for a few weeks now, and I touched something that left me open-mouthed all by building a portfolio site.

  Staging:

  In order to maintain the low initial file size, I currently use UILoaders to control the content that is currently viewing.  I have five total UILoaders that change the source in that based on what the user clicks on the button.  Each UILoader is nested inside two clips so that I can control the transition animations and so they do not overlap.   Example:

  I.Index/Stage

  A.Parent Movie Clip

  1. nested Movie Clip with custom entering and leaving the motion tweens on the UILoader child.

  a. UILoader

  So far, I was able to use the buttons on the main to shoot to the top of the UILoaders eco-friendly stage.  When you click a button, an event listener calls the UILoader, sets its source and anime 'in' thanks to its parent movie clip.  When you click a different button to replace the source of the UILoader, the original source is anime 'out' with the same parent movie clip.

  Here's the problem:

  I can't understand how to change the source of the UILoader that after the custom motion tween is completed.  I know how to configure a listener of events on each button to change the source of its respectful UILoader, but I need the animation 'out' motion tween to complete to the UILoader before the new source is caught.

  It seems to me that there should be an event listener to attach to button, listen to an interpolation of specific movement at the end and attach a function to change the source of the UILoader only at this time there.

  Here's a sample script that toggles the IULoader source:

  content_mc.profile_btn.addEventListener (MouseEvent.CLICK, profileClick);

  
  function profileClick(e:MouseEvent):void {}
  profile_mc.profile_mc.profileLoader.source = "Profile.swf";
  profile_mc.gotoAndPlay ("Enter");
  }

  content_mc.work_btn.addEventListener (MouseEvent.CLICK, workClick);

  function workClick(e:MouseEvent):void {}
  profile_mc.gotoAndPlay ("Exit");
  }

  Any ideas?

  I would really appreciate it.

  Yes, you might have a function coded everywhere where he would be executed better and you could call this function at the end of the Tween.  If interpolation is inside a movieclip, then you can precede the function call with MovieClip (parent).  or MovieClip (root).  Depending on how deep you are on children...

  MovieClip (parent) .callFunction ();

  You can also assign an event listener personalized to the movieclip that listen to the parents.  At the end of the Tween in the mc, you might have...

  dispatchEvent (new Event ("imDone"));

  In your parent assign you a listener for the event to the mc.

  youTweeningMC. addEventListener ("imDone", eventHandler);

  function eventHandler(event:Event):void {}
  Regardless of your intentions
  }

• How to stop looping motion tween

  I'm using Flash CS4. I applied a motion preset to one of the symbols on my scene. However, the motion tween is applied to the symbol very much & it makes a loop on the beginning of the tween, after finishing to complete.

  However, I want only the interpolation to fill a single time & loop not on after him. How can I achieve this in CS4?

  Insert a keyframe on a new layer to the last frame of the timeline, open the actions and enter "stop();"

• No motion on the motion tween

  I have three separate ayers which are grey instead of the usual blue/gold color.  On these layers, even if I do the same procedure, it gives me the starting point and he then jumps to the end point with no movement on the way through.  Also, it doesn't have a line of trail.  The other does nothing and the third has a continuous line that is not feasible.  There also a way to remove an image of a layer and then does not allow me to make a replacement of the library...

  Which produces this kind of things and what do about them.  What I did with the lost image was delete the layer and start again.  This isn't how it should be treated.  I have not yet tried this method on the lack of movement ones.  I want to know what happens!

  A general question is if it is possible to reverse an alpha tween so that it starts the light and then goes to a greater opacity?  I think that the images would look like good shooting off the Fireworks slightly and then win opacity.

  

  Your three layers that are gray in color in the timeline have only a single keyframe for each span of a single object. The blue layers indicate that you have created the motion tweens. The point initially filled and filled in the end diamond are two keyframes containing the length of the animation.

  Here's a great tutorial that explains how to animate the chronology can be accomplished: Flash Animation Learning Guide: timelines and keyframes. Adobe Developer Connection

• I still can't install creative cloud desktop app on my mac running Yosemite it will download the dmg but will stop the installation process at halfway through the status bar displays installation then disappears to the halfway point - I used the creative

  I still can't install desktop application creative cloud on my mac running Yosemite 10.10.1 it will download the dmg but will stop the installation process at halfway through the status bar displays installation then disappears to the halfway point - I used the creative cloud cleanser and tried to install it as a new user admin does not work - I was able to install the desktop application creative cloud on my Mac pro that uses OS X 10.9.5 (and will install Creative cloud apps) two machines have similar programs.

  Hi Steven,

  Please refer to the threads below where this issue has been addressed:

  installer of creative cloud disappears

  Re: Installer of Creative cloud disappears during installation

  Kind regards

  Sheena

• Move keyframes in the motion tween?

  Hello

  In Flash CS5, after inserting a keyframe in a motion tween, how to move the keyframe to another framework?

  See you soon

  Shaun

  You don't need to use the query editor if you do not want, you can do it in the timeline panel. CTRL + click on the image on the motion tweens and then drag it to a new location.

• scaling of symbols and the motion tweens

  I've created an animation with various symbols and motion tweens, especially on an external level timeline.  In the end, I realized that the resolution is too low for a quality quicktime export.  After the scaling of the canvas of 550 x 400 at 1650 x 1200, I tried scaling the rest of the objects using the brackets "edit multiple images", but every scene I try to do that, only some of the executives are put across.  They begin to scale and move in all directions, oscillating between the original and new positions.  So, I have to go back and manually scale/reposition the interpolations.  I'm doing something wrong with the edict several frames thing or something?  Or y at - it an easier way to do this that I've not seen?  Thank you

  -Gene

  "

  1. go in the settings of publication in the file menu. Go to the HTML tab change the film size in Dimensions: section. Change the setting from 'Match Movie' to 'Pixels' and enter the dimensions you want. Publish. If there is no bitmap, then it should look acceptable.

  2. If ABSOLUTELY everything in your movie is in the timeline, then you can select all frames in all layers, then select the images to copy in the Edit menu or right click on the layers menu. Create a new movieClip. Select the first frame on the first layer and then select Paste frames from the Edit menu or the menu right click on this image.

  Now, you have a copy of your entire movie into a movieClip. Create a new movie at the new size you want. Copy and paste this new movieClip in library of the new film. Save the new movie. Drag the movieClip on the stage of the new film. Stretch the movieClip to adapt to the new size of the stage. Save again. Play. You should now have a movie that turns to the new size of the image. Depending on how your Actionscript wrote, you may need to make some changes.