Changing keyboard settings

Similar Questions

• Pavilion: change keyboard settings

  Dear support Member,

  Please support me to change my keyboard settings...

  My problem is... When I press any key F1 to F12, need to press the Fn key before him,

  I would like to change my priority and make them default keys instead of functions such as brightness, volume control and etc.

  Hello:
  
  Disable the Action key in the BIOS:
  http://support.HP.com/us-en/document/c02035108
  
  She'll be activated usually the factory.
  
  Concerning
  
  Visruth

• Equium M50 - keyboard settings

  My new M50-164 seems to be put in place so that the built-in keyboard is considered American despite the locale in the UK. This means that instead of @ I get ' and instead of ' I get @, but, more importantly, it means that I have to use extended characters or copy of the table of characters to get the sign £.

  I do not think that Toshiba would sell machines that are not suitable for the country, they are sold in without at least warn the buyer, so I guess there must be a way to change keyboard settings agree with he British keyboard.
  Problem is, I can't.
  Does anyone know?

  Hi Jonathan

  It of not a lack of Toshiba. These settings you can change in the options of the Control Panel regional and language. There, you must choose the language tab, and then click details.
  There you can change the layout of the keyboard.

  Good bye

• Is it possible to change the settings via the keyboard?

  The screen of my laptop is broken, so I use a VGA cable to project the screen on my monitor. I factory reset my phone, so all my settings have been reset to the default value. What I was wondering is, is it possible to use my keyboard to change the settings so that I can project my screen on my monitor? And if no, what is the estimated price to replace my broken laptop screen?

  Hello

  Welcome to the Microsoft community. I will certainly help you with the problem you are experiencing.

  To project the screen on an external monitor, press Windows + P. By pressing this combination, you can switch the output between the monitors.

  See also,

  Plug a second monitor or projector

  Hope this information was useful.

• 40M8365DG - how to change keyboard Toshiba?

  I have a Toshiba 40M8365DG tv Smart and trendy top one ' trust air mouse and keyboard «AZERTY "»
  But how can I change my TV setting of 'QWERTY' to 'QWERTY '?

  Can someone help me?

  What country setting do you use? The keyboard settings could be linked to the country, but if you choose a different country of yours, you may experience trouble with scanning channels, because it is not done for your region.

• Question on the keyboard settings

  How can I change the keyboard to that "does not appear when I want @?"

  Hello Maria

  The keyboard settings, you can find in Control Panel under regional and Language Options.

  1. click on the language tab, and select the details option in text services and input languages
  2. under default input language, select the keyboard language

  In this case it will be shown the same symbols as seen at the keyboard.

  Good bye

• Bad on Satellite L20 keyboard settings

  Hello
  just bought me a series of satellites for laptop Toshiba L20/L25. I installed my wxp and now the keyboard does not match the letters and numbers. for example if I press shift and 8, there is * and not (.)
  How should I do?
  Thank you and my email is [email protected]

  Hello

  I agree with James. This looks like a bad keyboard language setting.
  You should check what keyboard language installed on your device and change the settings of operating system as in the previous announcement described.

• Ability to remotely change the settings of the BIOS on the Thinclients T610?

  Hi all!

  We use thin clients HP t610 for digital signage and we have deployed more than 40 years in the field. They seem to work just fine for our needs.

  After a few failures caused by construction crews an i've had phyiscally visit each sign to reactivate them. Since then we have deployed the t610s with the ' after the loss of power = on "setting in the BIOS. This seems to fix the problem and they light up immediately once the power is restored. Now that we have solved our problem, I would like to change the client deployment light setting as well.

  Is there a way I can change the settings of the BIOS on the t610 remotely? Or do I have to visit each change them manually and the machine with a keyboard? Some are installed in small spaces which are no easy access to remotely change would be better.

  Thanks for your help!

  Depending on what OS you have on the t610 you can download BIOS utilities for this on the HP website: http://h20565.www2.hp.com/portal/site/hpsc/public/psi/swdHome/?cc=us&cc=us&lang=en&lang=en&sp4ts.oid=5226817&ac.admitted=1404312731554.876444892.492883150

  There is an included cmd line tool that captures the BIOS settings that you can edit in a text file and deploy it to other units remotely via HP device for example Manager.

• "Change plan settings" opens whenever I click on enter

  I made the mistake of letting my little 1 year old daughter plan with my computer for about a minute.  Now every time I press Enter a window with the following path appears:

  Control Panel > power options > change plan settings

  Help!

  You have a programmable keyboard?  She could have accidentally reset ENTER to redirect to this location.  If so, it's just to reset the keyboard to factory settings (but's done it according to the manual - it varies depending on the make and model) and you should be fine.

  If it does not or is not the case, see this article on the remapping of keys: http://vlaurie.com/computers2/Articles/remap-keyboard.htm.  I don't know if the program can be used with only a mouse (or without the Enter key), but it is possible.  I am sure that the problem can be corrected in the registry if you can get there (even if I have to be honest and say that I don't know how to do that, or rather that the entry refers to the Enter key).  To do these two steps, try to start in safe mode with networking (hit F8 continuously during booting until the menu and see if the enter button is working.  That would be great.

  If that is not the problem or does not solve the problem (perhaps because the Enter key still does not work in full safe mode) then try a system restore to a point in time BEFORE the problem started (I suspect it's probably where you actually have to start because I'm not sure of the keyboard mapping program or soft keyboard).  Here is the procedure: http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/.  Don't forget to check the box to show more than 5 days of restore points.  If the first attempt fails, then try an earlier point or two.  NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates.  You may need to use the CD to do if F8 does not press enter. How to start the CD are described below.  I hope that the button functions correctly enter this mode, because it will be VERY difficult to do any troubleshooting without it.  All the keys she might have reset, it was certainly the worst.

  If the system restore does not work, do a startup repair, boot from the disk Installation of Windows Vista genuine (or one that you can borrow from someone) or a recovery disc.  Here is the procedure: http://www.bleepingcomputer.com/tutorials/tutorial148.html.  You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD.  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  Put the CD in the drive and reboot.  When you are prompted, press any key to boot from the CD.

  If you do not have a floppy disk, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD.

  If this does not work, try to start in safe mode (repeatedly hit F8 key so that the start and go in safe mode with networking).  Then we will check some of your system files:

  Go to start / all programs / accessories / command prompt and right click on command prompt, and then click Run as administrator.

  Type sfc/scannow, go and let it run.  It will scan and try to correct some of your system files.  If all goes well it will complete with no corruption, he couldn't fix it (if there is such corrouption post here or try to analyze it to find the problem or files using http://support.microsoft.com/kb/928228.

  If this does not work, you will need to do a repair/system upgrade using the Windows Vista Installation disc authentic (you own or that you can borrow from someone).  Here is the procedure: http://www.vistax64.com/tutorials/88236-repair-install-vista.html as well as the upgrade from an earlier version of the Windows section of the following: http://support.microsoft.com/kb/918884.  Although this will not affect your data, settings or programs, you should always back up your data before you start just be on the safe side.  I don't like this goes away from doing just that a 1 years within 1 minute, but to be honest I don't know how to do what she does if I had hours of research on problems - it will be interesting to see how it works for later reference (although I am sure that you feel completely different now).

  I hope one of these procedures can solve your problem (probably the system restore or repair/upgrade system).  If this isn't the case, after return and we will try something else.  Return message anyway so we know how it turns out.  You have me very curious at this stage.

  Good luck! Lorien - a - MCSE/MCSA/network + / A +.

• Changing keyboard key assignments: U.S. Dollar > pound sterling

  I have an American standard layout keyboard.
  I don't understand why I have 2 keys which give a symbol dollar and none that give me a pound (or another configurable currency symbol)

  I searched the help files available, as well as the existing responses - I have not achieved anything.

  How can I change the settings so that my keyboard driver recognizes the key I want to reassign (one above the right arrow key on my layout, close the Euro symbol) is no longer will result in a $ (what I can access via SHIFT + 4), but will now lead a £?

  Found this on another forum.  It may be useful

  There is no user interface, out to change the registry manually.
  Fortunately the Windows 2003 Resource Kit is a handy utility called
  "Remapkey.exe", which will make changes to the registry for you. You can
  Download Remapkey as part of the tools of the Res Kit from here:
  http://www.Microsoft.com/downloads/d...displaylang=en
  CAUTION: none of these Windows 2003 tools are tested or supported on Vista!
  However, Remapkey works great, the installation Code Scan Mapper works exactly
  the same Vista as in previous versions. Only difference on Vista is you
  you will need to run as administrator (right click on the EXE, choose Run as)
  Administrator)

• Not able to save keyboard settings after reboot / logoff

  Original title: "Appy" of change is not saved

  1. I have an ACER Aspire One. Every time when I changed the keyboard settings and "Applied", it only works for the duration of the session. If I disconnected and then reconnected, the changes will be gone. I have loggon as administrator. Any help will be appreciated.

  Hello

  1 were you able to save keyboard settings in the past? If Yes, you did it all change hardware or software before the show?

  2. What is the exact model of your computer number?

  Method 1:

  See the following Articles from Microsoft:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  http://Windows.Microsoft.com/en-us/Windows7/automatically-get-recommended-drivers-and-updates-for-your-hardware

  Method 2:

  Uninstall keyboard drivers.  Download the drivers for keyboard from the manufacturer's website and install it.

  Method 3:

  Please start your system in safe mode and check if the settings remain unchanged, it.

  To start your computer in safe mode through the article mentioned below

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

• I don't want my locking Surface during execution of music online... where I can change the settings for that

  I have a Surface RT and I like it, but I'm having a bit of thread hard time, preferences and settings... the thing is that I don't want my screen automatically Surface lock because I leave without action (no contact with the touch screen or keyboard) while listening to online music in the radio stations or videos on YouTube because the music or videos stops when the Surface freezes and the screen turns off.

  Where can I change the settings and choose an option from this order screen to stay all the time and just go off when I push the locking/release button.

  Some option like when I choose my laptop not showing the shield after a period long inaction.

  Thanks for replying... I tried everything without success...

  Hello Conchita,

  Thanks for choosing Windows and thank you for providing an opportunity to help you.

  According to the description, you are having problems with Surface getting locked after awhile.

  Unfortunately, this option can be defined as Surface hangs after some time when he feels the inactivity.

  http://www.Microsoft.com/surface/en-us/support/surface-with-Windows-RT/security-sign-in-and-accounts/sign-in-and-out-of-surface?LC=1033

  Answer to us if you are having problems with the Surface or any other problem of Windows, and we would be happy to help you.

  Good day!

  Hope this information helps.

• Change the settings of PC crashes

  Since the upgrade to Windows 8.1, I am unable to access to the "Change PC settings" even in Safe Mode.

  Here is a paper copy of the event viewer
  Log name: Application

  Source: Microsoft-Windows-Immersive-Shell

  Date: 19/10/2013-13:15:28

  Event ID: 5973

  Task category: (5973)

  Level: error

  Keywords:

  User: KJW100\Richard

  Computer: KJW100

  Description:

  Activation of the application windows.immersivecontrolpanel_cw5n1h2txyewy! microsoft.windows.immersivecontrolpanel failed with the error: this application does not support the specified contract or is not installed. See the Microsoft-Windows-TWinUI/operational log for more information.

  The event XML:

   

     

      5973

      0

      2

      5973

      0

      0x2000000000000000

     

      11301

     

     

      Application

      KJW100

     

   

   

      Windows.immersivecontrolpanel_cw5n1h2txyewy! Microsoft.Windows.immersivecontrolpanel

      -2144927148

   
  Signature by using a Local account works OK, but when I use my Microsoft Account, I get the error.
  Could someone advise me please how to fix this.
  Thank you very much
  Sam

  Hi Ricky,

  Event Viewer errors, it seems that you have problems with control panel that displays the event id error 5973.

  Try to do a scan of the sfc on the computer and check.

  1. press "Win + X" on the keyboard and select the command prompt (admin).

  2 in the elevated command prompt, type sfc/scannow , and then press enter.

  3. you can also type the command in the command prompt:

  DISM / Online/Cleanup-Image /RestoreHealth

  Come back if you have any questions with windows and we will be happy to help.

• Windows 8 - not able to access 'Change PC settings'; Unable to create a user profile. Store/Start menu does not work.

  Hello

  Recently, I'm stuck with these issues:

  1. not able to access 'Change PC settings' - when I click on it nothing happens.

  2 start menu/Store does not work - I am using the profile of the user admin Start Menu is a blank blue screen with just the user name appears at the top right. Store is completely scratched too.

  

  While the guest user has all the tiles in Start menu/store.

  3. cannot create a user profile - I wanted to try to create a new user profile and check if the store is working properly. When I click on 'Add a new user in the laptop settings' nothing happens.

  I tried the system restore, but it does not solve all of the above. Is there any solution to these problems without having to reinstall Win 8? I don't have the installation discs.

  TIA!

  You can use the restore or refresh options without going in the settings of the PC.  Read the instructions carefully, it says:

  If you can't identify, or use laptop settings app, you can access these rather safe mode options. On the login screen, click on the power icon, and then hold down the SHIFT key on the keyboard while you click on restart. Now keep update until the next screen appears.

• How to stop change keyboard languange to Photoshop?

  I am from Bangladesh.

  In my computer, I have software installed, Avro which is a bengali typing in unicode software.

  Usually I don't have a problem with the keyboard.

  But when I open photoshop, I had a problem with the language of the keyboard.

  Each time, it turns into Bengali.

  If I press Alt + Shift, he switch to English for temp time.

  but when typeing if I press alt + shift yet somehow, it changes lagnuage again.

  How can I stop this development? any idea?

  Adobe Photoshop Version: 12.0 (12.0x20100407 [20100407.r.1103 2010/04 / 07:14:00:00 cutoff; r branch]) x 32

  Operating system: Windows 7 64-bit

  Version: 6.1

  System architecture: Intel CPU Family: 6, model: 5, Stepping: 2 with MMX, entire SSE, SSE, SSE2, SSE3, SSE4.1, SSE4.2 FP

  Physical processor count: 4

  Processor speed: 2261 MHz

  Built-in memory: 2807 MB

  Free memory: 844 MB

  Memory available to Photoshop: 2313 MB

  Memory used by Photoshop: 60%

  Hello!

  It is a function of the operating system.

  You can disable this shortcut by going to:

  Control Panel > options (vista) regional and language > keyboards and languages tab > change keyboards button > advanced key settings > keyboard shortcuts for the input languages > choose between the input languages > tap on change Key Sequence > select "Unassigned" under the input language button.

  This is!