changing permission vote in the CARS drive

Similar Questions

• Vista Windows Media Player; cannot get songs burned on a CD to play in the desired order in the car drive

  I have several CD of music that play in the drive of the car in the order I put them into the burn list/list of reading.  Now, I have a CD that plays in its agenda, and I can't understand how that is wrong.  The CD plays ok on my PC...

  Hello

   
  
  1. you try to create a MP3 or Audio CD format?
  
  2. what happens when you tried to edit the order before you burn the CD?
   
  I suggest you to go through the link provided below.
  
  Burn a CD or DVD in Windows Media Player
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Player
  
  Windows Media Player playlist: frequently asked questions
  
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Media-Player-playlist-frequently-asked-questions "

  Provide the link below and refer to the section change the settings for ' add a list of all files burned disk to format;

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-settings-for-burning-a-CD-or-DVD-in-Windows-Media-Player

   
  I hope this helps.

• language problem OS how to change to English and the partition drive

  
  

  Welcome to the forums themselves.

  (1) If you want Windows XP in English, you will need an English Setup disk. Absolutely, there is no way to change the Finnish English user interface. There are packages for installation of the Multilingual User Interface to change from English to other languages.

  (2) If you plan to repartition the hard drive, do not expect to be able to recover to factory State preinstalled. The backup image is locked to the size of specific partition, where it was created. If you change the partition somehow, you lose the functionality of recovery.

• Can't burn music on the internal CD player so how do we change to use only the external driver to burn CDs?

  My CD drive doesn't work, so I bought an external CD drive.  I can rip music from the new drive, but when I want to burn I don't have the option to burn on the internal drive that no longer works.  How can I switch (permanently) to my external CD drive?

  Hello

  · What is the number and the model of the external drive that you use?

  · You use windows media player to burn the disc?

  · If so, what is the version of windows media player on the computer?

  You can check the link below: how to copy music to and from an audio CD in Windows XP: http://support.microsoft.com/kb/297015/en-us

  How to copy information to a CD in Windows XP: http://support.microsoft.com/kb/306524

• HELP: How to change the hard drive on the envy 15

  Hello

  I have a problem with my PC. I need to change the hard drive but I can't open the top box to access the old hard drive.

  someone has experienced the same problem?

  OME information on my computer:

  HP ProtectSmart

  model: 15-u060nz

  OS: Windows 8.

  in advance, thank you

  Pascal

  Hello everyone,

  great, I found, I have reality my colleague one saw 2 hidden screws.

  After that no problem to replace the hard drive.

  Thank you very much

  Take care

  Pascal

• Windows XP - programs try to install on drive D instead of c. not giving prompt to change the installation drive.

  I try to run the installation on my new webcam and it tells me I don't have enough disk space, what is true on the D drive that should be reserved for the only programs of systems, my C drive where I want to install has over 140 GB of free space and my ram is 1.94 GB. During the installation it does not give me a prompt for what reader, I want the program must be installed. And I don't know how to change it to. C drive is where I want to this installer.

  Do not have to change anything in car cause C was there all ready. I then tried to open the program files on the C drive and it gives me this error "program files is not accessible access is denied" any ideas?

  Restart the computer in Safe Mode. See if you can access program files. If so, you probably some type of malware blocks your access and perhaps even changed your permissions.

• My Vista desktop crashed and I need to access the hard drive on USB. Permission is denied

  I have a desktop Vista raid 1 and raid system crashed.  I put a new hard drive and no Vista Recovery.  I put the old drive in an enclosed and when I try to open it, I get "you don't have permission to access this drive."  I have the passwords for the player but do not know how to access.  Any ideas?

  Hello lightly,

  Here are the steps to change the ownership and permissions:

  1. Right-click on the file or folder, click Properties, and then click the Security tab.
  2. Click Advanced, and then click the owner tab.
  3. Click Edit, and then do one of the following:

  · To change the owner to a user or group that is not listed, click other users and groups , in area enter the object name to select (examples), type the name of the user or group, and then click OK.

  
  To change the owner to a user or a group is listed in the change owner to box, click the new owner.

  4. If you want to take ownership of the contents of the folder, select the check box Replace owner of subcontainers and objects .

  5. click OKand then click Yes when you receive the following message is displayed:

  You are not allowed to read the contents of directory folder_name. Do you want to replace the the directory permissions with permissions granting you full control?

  All permissions will be replaced if you click Yes.

  Note: folder_name is the name of the folder you want to take charge.

  6. click on OKand then reapply the permissions and security settings that you want for the folder and its contents.

  Additional remarks:

  • An administrator can take ownership of any file on the computer.
  • Affecting the ownership of a file or a folder might require that raise you your permissions using user access control.

    Hope this helps you. Let us know anyway. Make it a great day!

  "And in the end the love you take, is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

• file permission security and files on the shared drive

  Hi, we have a folder called 'Team' in the shared drive \\India\Team. I placed an excel file named "Hourly" activation "share workbook" option for multiple users in my team. I have a total control on the 'Team' folder access I want to give read access to the members of my team 5 at the level of the 'Team' folder and change the access to my 5 members of the team at level 'hourly production' file so that all members can be updated hourly count at the same time. Limitation should be my team members should not be able to rename the folder 'Team' and should not be able to delete the file 'hourly Production '. I tried a lot of things, but it does not work. Please help me. My mail id is * address email is removed from the privacy *.

  Hi Christine,

  Welcome to the Microsoft community.

  According to the description you have provided to assign the read permission for the file in the shared drive.

  I advise you to check what are the rights that the user has to the shared folder. Please login as an administrator.

  a. right click on the folder, click Properties - Security tab - advanced

  b. click effective permissions, click Select, enter the user account, and then click OK.

  c. check what are count it the permissions the user has.

  d. If the user does not have sufficient permissions, click the permissions - changes to the permissions tab.

  e. click Add, enter the user name, click OK

  f. Select the appropriate permissions for the user, and then click OK.

  See: How to open a file if I get an access denied message?
  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-open-a-file-if-I-get-an-access-denied-message

  File sharing essentials
  http://Windows.Microsoft.com/en-us/Windows7/file-sharing-essentials

  If you have any further questions on Windows, feel free to let us know. We will be happy to help you.

• How to change the permission to touch the key settings for all users?

  Original title: Howsto permission change to change the touchpad settings

  Members of the Forum,

  My windows7 OS is implemented for several different users.  The touchpad is very sensitive, it is difficult to work with EXCEL or WORD.  Whenever possible, I use a USB keyboard and mouse, but it's not always convenient.  I would like to change the permissions on the mouse settings to allow all users to disable or customize the touch pad settings.  How did you do that.  Any assistance is much appreciated.

  Lemorse

  Mahesh,

  Thank you for your response.  First of all to answer your questions.  I do not work in a domain environment, my computer is custom built, and I am the administrator.  I changed the touchpad settings in the past, but it I need to make on behalf of users administrator when I want to change. As it's boring, I wanted a more convenient way to change the settings. (It was much easier with XP and previous editions of Windows because they would ask permission to make the change and if you have the administrator password, you can change the settings).  I usually work as a user limited to guard against unauthorized or accidental system changes.  After posting my question, I kept sleeping with her and found that if I changed the permissions of pilot pad touch and shared with me as a limited user, I was able to customize I like it as a limited user.  By placing the shortcut to the driver on the desktop that I am able to disable the touchpad at will whenever I work on WORD or EXCEL.  Therefore, I solved the problem.  Once again thank you for taking your valuable time to answer my post.

  Lemorse

• Change the time-out for the vote of the files

  Hey, is there a way to change the default time-out for files with right to vote. The idea: I have a grid storage (soft). Then I configured the external redundancy for my roc diskgroup where is my votingfile.
  
  When one of the stored mirror gets turned off, the system hungs for almost 2 minutes. The deadline to vote is set to 99 seconds, right? This should be the default setting, at least, according to the journal of crs alerts.
  
  Is it possible to change this value?
  
  At present, the database gets shutdown, after which expires the time-out.
  
  Christian

  Hello
  This note will help you with the IO time-out, but I think that's not your problem.

  See:
  Component sync (CSS) of the Oracle Clusterware services maintains two mechanisms of heartbeat heart 1.) the heart rate of the disk on the device with the right to vote and 2.) the heartbeat of the interconnection network which establish and confirm the valid membership of node in the cluster. Both of these mechanisms of heart beat have a timeout associated value. The heartbeat of disc has an interval of time-out of e/s internal (DTO disk time-out), in seconds, to complete an i/o to the drive to vote. The parameter misscount (MC), as noted above, is the maximum time, in seconds, that can not miss a heartbeat of network. The e/s disk heartbeat time-out interval is directly related to the setting of parameter misscount.

  Change the default value of misscount not only affects the delay interval to wait for IO to the drive to vote, but also affect the tolerance of pulses missed through the interconnection network.

  MissCount should NOT be changed to work around the problems mentioned below.
  HBA QLogic cards with a link down Timeout greater than the default misscount.
  Cables wrong with Matrix Storage/SAN this purpose IO latencies
  SAN switch (such as Brocade) failover latency greater than the default misscount
  EMC Clariion array at the intrusion of the AOC for superior to default misscount MS backup
  EMC PowerPath path and to repost IO error detection and redirect than default misscount
  Bad network configuration SAN that creates latencies in the path of the I/O.

  Then I configured the external redundancy for my roc diskgroup where is my votingfile. When one of the stored mirror gets turned off, the system hungs for almost 2 minutes.

  As you use external redundancy Oracle knows not that there is a disk mirrored by behind.
  Perhaps the OS or storage keep I/O when you stop mirroring due to a bad configuration. I think that this problem is related to the OS or storage not the Oracle Clusterware.
  If you perform this test with the diskgroup (external redundancy) storing data will have the same result.

  Kind regards
  Levi Pereira

• My computer with two hard drives and 2 starting systems has the car crash in the solid state. When I got the new drive and tried to restore from time capsule, I lost some data. How can I see what backups are on the time capsule? My laptop is also backed u

  My computer with two hard drives and 2 starting systems has the car crash in the solid state. When I got the new drive and tried to restore from time capsule, I lost some data. How can I see what backups are on the time capsule? My laptop is also saved to the time capsule. Everything is in 'Data' when I look through the Airport utility. I think that the information that I've lost are still there since I was a Capsule 3 to.

  Time Machine backup to a sparsebundle.

  The sparsebundle will use the share name of computer. So, it should be obvious who is your Macbook and that is your Macpro.

  Open the sparsebundle in Finder and keep open the subfolders until you get to the backup of each separate hard drive...

  You has of course set the exclusion in Time Machine?

  By default, Time Machine will exclude your second drive unless you have included it. Did you?

  Once you get to this level during the backup, you can do a full restore manually whenever you want.

• Photo date change during transfer to external hard drive from the "Photos" application

  Hello

  When I try to transfer the images to my request for 'Photo' on my Macbook (OS X Yosemite) to a hard drive external, the dates and times of the images change.

  I would like to transfer only some of my images on the hard drive, so I can't make time machine.

  Is it possible to keep the dates and hours of original photos when copying them?

  Thank you very much for your help!

  Select the photos and export (menu, file == > export)-this will include the Photo with date and time metadata in EXIF/IPTC fields for use by any porgram Photo (you can check this by using Preview)-as you create new files file metadata will obviously be new but we can't change the photo metadata

  LN

• I changed the hard drive, how do I put on an operating system on the new hard drive

  I changed the hard drive, how do I put on an operating system on the new hard drive

  Restart with the keys Option and command R keys. If this keyboard shortcut does nothing on your Mac, use a compatible Mac OS X installation DVD.

  Follow the prompts on the screen.

  (142198)

• Get the iPhone to recognize the change to iTunes Library the drive letter

  I'm doing something that should be extremely simple, and Apple has found a way to make it incredibly difficult. I'm moving my media to a new computer. On my old computer, all the media has been on the J: drive. On my new computer, it's all about the D: drive. Other than that, the folder structure is exactly the same. Apple says that in documentation for migrating to a new computer, activate the option "Keep iTunes folder organized Media". There are several reasons why this is not an option, mainly because iTunes is the absolute worst to organize your media folder. I've seen cases where iTunes dumps simply all your files perfectly organized in a single folder for you to figure out what that is when you get the file you need. No thanks, I'm perfectly capable of organizing my own files. Not to mention, my multimedia files are on a data disc and the app folder, where the files to iTunes library is on an SSD with limited storage. Then... Guard iTunes library trace the location of support using a "iTunes Music Library.xml" file. I've updated this file to use the new location and when I open iTunes on my new computer, everything is perfect. All my media is there with all my custom illustrations I apply (iTunes can also be really terrible at the corresponding work on music not purchased via iTunes!). If great, let's get my iPhone recognized now because it's really the only reason why I use iTunes. As soon as I connect my phone and it starts the synchronization process, it crushes everything in the XML file and returns all my music in the original location (now the music in the iTunes library has!'s next to all my music sync). You're going to go to a song and it will ask you the new location, I can go to, and then iTunes invites even to use this new location to update other files 'disappeared', but the problem is this feature only searches the subfolder where the particular file is located, you have access to what is in this case an album. Do you know how many albums I have? You mean I have to go to every single album and update the location manually? Once again, no thanks! So my thought at this point, ok, let's just resync all the music with the phone, that well that is always a huge pain given the extremely slow transfer speeds from your computer to your phone (Apple Hi, meet 3.1 USB or same USB 3.0) in combination with the size of my library (we're talking days to complete!), it's even less of a pain then go each file (or a piece of each album) and updated the location. On a side note - it would be really great if the synchronization on the Wi - Fi technology still works... I mean, they had what, over 4 years to operate and you're still lucky if your phone is recognized by Wi - Fi. That means I have to leave my phone on my computer for days and who really has the ability to do? Sorry, I digress. So, I removed all of my music from my phone and got iTunes to be happy with the new drive letter. Great, let's start the arduous process to sync my music on my phone. I re - activate the option synchronize my music and what happens, my iPhone again overwrites my iTunes library with the former location of media! Excuse me, but how is it reasonable to have the phone, which is a destination and contains a subset of your library, to be the registration system for which the files are stored in the source? I mean come on! This is absurd! I've always hated that Apple is owner and forces you to use iTunes (some of the worst software ever developed) to manage/sync your media. But for years, I have it justified by saying iPhone works simply. No worries. Well, I'll say, it does not just work and my insinuation that Apple made simple products that just don't work no longer holds water. At this point, I am very close to say goodbye to the iPhone and switch to Google project. I'm tired of less expensive phones friends surpassing my overpriced device that uses obsolete technology. Sort of, I'm sorry to dump all this on the community, but it is absolutely ridiculous that it's so complicated to change a drive letter and I am at my wits end. Thanks in advance to anyone who can offer a solution.

  I'm doing something that should be extremely simple, and Apple has found a way to make it incredibly difficult.

  If you was to move your iTunes LibrRy to another drive, follow these instructions: How to move your iTunes library to a new computer - Apple Support

  If you have already moved successfully, just launch iTunes while holding down the button Optio/alternate, then choose the location of the library.

  < published by host >

• Satellite Pro L500-1W4 - cannot install Win 7 Pro after changing the HARD drive

  Hi all

  I need assistance with Windows.

  I have a Toshiba Satellite Pro with Windows 7 preinstalled pro and the recovery DVD to downgrade to Windows XP Pro.
  I had to change the hard drive, so I try to reinstall Windows 7 from the recovery CD, but it does not work. He said that it is not possible to install this on this machine.

  So I tried with Windows XP CD recovery and no problem
  I'd rather have windows Windows 7 but I do not know how to retrieve
  Last information, the Windows XP CD recovery came with the laptop that Windows 7 was made by the store who sold me the computer.

  Thank you for your help
  Julie

  As far as I know there is not a kind of limitation and if there is no problem with the original recovery for Win7 disc, you should be able to install it on any HARD disk that you use with your machine.
  I upgraded HDD to the SSD on my installation of picture machine and the restore worked without any problems.

  To be honest, it is not easy to say what the problem is here, but the Win7 installation disc is somehow suspect for me. I don't know what model of laptop you have exactly, but somehow, I feel you didn t get original drive Win7. Best evidence is the Windows XP Home edition recovery disk. The prinziple with Win7 is the same and it should works.

  When you use this disk you should have the menu as shown on http://aps2.toshiba-tro.de/kb0/HTD1303440001R02.htm

  This document explains how this works with the original installation disc of recovery.