Changing the values of gray and black objects/type

Similar Questions

• Difference between the scale of gray and black and white adjustment

  Hello

  I just want to know the difference between black and white and grey adjustment of scale when printing text only, and which uses less ink. Thank you

  Hi jexee55,

  I see that you would like to know the difference between grey and printing b & w.
  I'll be happy to help you.

  Basically, it prints in shades of gray.

  Save on ink also.

  You can change the setting in the print in grayscale driver.

  You would go into the Printers folder.
  Right-click on the printer, on the left, click printer properties.
  Click the paper/quality tab.
  Click on the button to advance down.
  Select the characteristics of the printer and enable or disable this gray scale.

  If you want to print a black and white document using black ink only, do one of the following according to
  your operating system. Depending on which printer you have.
  On Windows: Open the printer software, click on set preferences. On the paper/quality tab, click
  Advanced. Select black ink only in printing in grayscale in the drop-down list under printer
  Features.

  I hope this helps.

  Thanks for posting on the HP Forums.
  Have a great day.

• change the value of down and Boolean key in a test?

  Hello

  I'm having trouble with my VI, I have a 'next' and 'previous' button (Boolean). I want to run the same event in the cases when: you press the left or right arrow keys, or when you press the previous or next buttons.

  When I add all events in a case of events, I can't determine which key I receive an event with all keys, which is fine, but I really need to know if the hurl right or left is pressed.

  Any who,

  Best regards

  Thijs Boeree

  PS. I also want a cursor and want to control the cursor with the next and previous buttons, but it's perhaps another kind of question...

  Hi ThijsBoeree

  Hope that the next VI fit your requirment. In this VI, I filter keys only for left and right.

  Concerning

  Javed.

• How to change the values of business rule at run time?

  Hello
  
  I'm using Oracle 11g SOA. I did a BPEL process that uses Business Rule. Now the BPEL process is deployed with business rules so how to change the value of the business @runtime rule. I don't want to change the value @design time and deploy the code again.
  
  Is there a console or the portal? as Oracle BAM has own url? What is the url of Business Rule Manager?
  
  
  Thank you

  Can you check is the deployment of "composer" is in Active state.

  In the weblogic administration console, navigate to Environment--> Servers--> SOA_SERVER1--> Deployments (tab) on the left side of the menu.

  Thank you
  Vijay

• Changing the values of abbreviation from the database to the ADF object

  I useADFJDeveloper 11g Release 2

  
  

  I use Entity object called Project referring to the actual database table. This table contains fields that contain values of the abbreviation; for example this table filed called STATUS that describe the current state for the project. this filed will be values such as: 'A' approved for, 'X' for rejected and so on.

  In the interface ( JSPX , or JSF Pages) I just drag / move the View object which refers to the Project Entity object . and the page displays the project files with their status as specified.

  It is:

  Is it possible to change the values of this observation to the real value of somewhere; It's like instead of the values (A, X,...) I want to have (approved, rejected,...)

  You can write in an el in the value of the State field as "#{binding.status.inputValue == 'A'? '} '. {Approved ': "Rejected"}

• Change the value of the variable object type

  Hi all!
  
  I created an object using:
  
  CREATE or REPLACE TYPE some_object AS OBJECT
  (
  some_information NUMBER,
  Une_fonction RETURN NUMBER of MEMBER FUNCTION
  )
  
  and when I tried to implement the member function 'une_fonction' who need to change the value of the variable 'some_information' as:
  
  CREATE or REPLACE TYPE some_object AS BODY
  
  FUNCTION MEMBER une_fonction NUMBER IS BACK
  BEGIN
  some_information: = some_information + 5;
  RETURN some_information;
  END;
  
  END;
  
  This is for me the following error:
  
  
  TYPE BODY CMS compile errors. SOME_OBJECT
  
  Error: PLS-00363: expression ' SELF. SOME_INFORMATION' cannot serve a purpose of assignment
  Line: 5
  Text: some_information: = some_information + 5;
  
  The question is:
  
  How to implement my function can change the value of 'some_information '?

  Benny Lava says:

  Thank you, but I really need to change the value of this variable.

  Then the member method requires write access to the object - and not only read access. To set write access, add the auto setting which allows him to change itself.

  SQL> create or replace type TSomething as object(
    2          some_number     number,
    3          member procedure SetN( self IN OUT TSomething, n number )
    4  );
    5  /
  
  Type created.
  
  SQL>
  SQL> create or replace type body TSomething as
    2
    3          member procedure SetN( self IN OUT TSomething, n number ) is
    4          begin
    5                  self.some_number := n;
    6          end;
    7  end;
    8  /
  
  Type body created.
  
  SQL>
  SQL> declare
    2          s       TSomething;
    3  begin
    4          s := new TSomething(5);
    5          s.SetN(10);
    6          dbms_output.put_line( s.some_number );
    7  end;
    8  /
  10
  
  PL/SQL procedure successfully completed.
  
  SQL>
  

• Change the values of the cluster in while loop and in the face at the same time

  Hello.

  I have a little problem in a test program, that I'm working on. I'll try to simplify as much as possible. I have a cluster control that contains two controls A and B. I want to:

  1. switch to update the value of the command A a while loop
  2. allow the user to change the value of the B control through the face, while the loop is running

  To change the value of order in the while loop, I first get the cluster control cluster, update the value of the control for a way to group by name and finally rewrite the cluster in the cluster control.

  The problem is that if the user changes the value of the B control while control that is in the middle of the update, the new value of B control is lost because it was read before updating in the face. Is there a way to get around this?

  DennisBengs wrote:

  1. switch to update the value of the command A a while loop
  2. allow the user to change the value of the B control through the face, while the loop is running

  Then they do not belong in the same cluster.  They are disconnected obviously enough that they do not go hand in hand.

  Where it can get really complicated, it is that you're talking about the user and code changing the same cluster.  It is very dangerous and very difficult to manage.  You might be able to get there with a driving force.  But walk slightly, my friend.

• In Photoshop, how can I change the background (Mount table) from black to white. I must have hit something because it changed suddenly mid-project and I cannot find anywhere in preferences to solve this problem.

  In Photoshop, how can I change the background (Mount table) from black to white. I must have hit something because it changed suddenly mid-project and I cannot find anywhere in preferences to solve this problem.

  Right-click on the pasteboard, and you should have a choice of colours from timeline menu.

  I would add that you should have a file to open it or it won't work.

  Gene

• Check box to change the value of the field and reveal hidden text

  Hello

  I need to change a value in a field when you press a checkbox

  the default value can be $ 10 in 'formfield1 '.

  But when the checbox is checked, the value of 'formfield1' must spend $ 8

  I also need a reval text function in "textfield2' of the text hidden to visible.

  Is it still possible to combine in a box?

  I found a code on the forum and changed it, but it does not work as expected, it affects the field, it shouldn't and it behaves a bit funny, here is the code to calculate.

  I also tried to change the value of Off to On, but who has not reversed the procedure than I hoped.

  Well its a start, maybe someone can understand a give me help on the way?

  ________________________________

  custom for the discount calculation

  var nDiscount = 2;

  name of the Sub total field

  var cSubTotal = "formfield1";

  name of the non-Discount checkbox

  var cbNonDiscount = "CheckBox1";

  default value for the non-Discount

  Event.Value = 10;

  see if the purchase is with discount or not non-Discount

  If (this.getField ("cbNonDiscount") .value == 'Off') {}

  Event.Value = this.getField ("cSubTotal") .value - nDiscount;

  }

  put an end to a custom calculation

  Ah, if you want the calculation to take place when the box is checked, use this:

  If (this.getField (cbNonDiscount) .value! = "Off") {}

  Instead:

  If (this.getField ("cbNonDiscount") .value == 'Off') {}

• I can't change the values of advanced type (exponent and index)

  When I try to use index and exponent my text disappears. First of all, I think that it is related to my font, but when I open Type preferences / advanced, I saw that the values of size and location of the exhibitor and index are nil. Whenever I changed it and they zero tricks once again. I want to reset these values and set as default on a permanent basis.

  Thank you for the answers.

  I use my native language (Turkish) InDesing because Adobe offers student only in the native language edition.

  (I hope that they will also offer English version. Because it's the translation is terrible).

  Default values for new text are defined by making changes with no selected text (and no active text cursor). If there is an open document, the default will apply only in the current document, any document open will apply to all new files. No change in the defaults will change existing text, or the default value for any existing document that is not active at the time the change is made, so all existing files need manual corrections.

• change the value of swatch

  Is it possible to change a specific color swatches value?  What I have so far changes the color, but does not maintain its overall value. I'm trying to change the value of set color chart, in turn changing the work already defined in a model.  Hope it makes sense.  Any input would be appreciated.

  var docRef = activeDocument;

  docRef.swatches ['color 1' Base] .color = new RGBColor (0,0,0);

  (1) your code doesn't really, because it's not how you define the new color object. It seems to work because the shade changes from white to black, but it is actually by default all black is not recognize all numbers in your new RGB color. Try to put it to any other color other than black, and you will always get black. The way to do it properly for a sample of process is here:

      var docRef = activeDocument;
      var newColor = new RGBColor();
      newColor.red = 255;
      newColor.green = 0;
      newColor.blue = 0;
      docRef.swatches ['Base Color 1'].color = newColor;
  

  BUT WAIT! There is MORE!

  (2) we will assume that you are using the Global checkbox and not simply rely on the color chart of regular processes to act as if they were global. So in order to correctly set the global shades, you actually do this way, not through nuances, but through 'points '. Fortunately, the tasks of the document have the same name as the nuances related to them, is almost the same statement.

      docRef.spots['Base Color 1'].color = newColor;
  

• Please, do I have with the help of Javascript can change the values of tones? for example my color of nail POLISH with c: 0, m:10, y: 15, k: 0 to change to c: 0, m:0, y: 0, k: 0? Thank you

  Please, I beg you, with the help of Javascript change the values of specific spot color? for example, I have the color called VARNISH with c values: 0, m:10, y: 15 k: 0 and it would help me to change to c: 0, m:0, y: 0, k: 0, in an action. Is this possible? Thank you

  Hello Kon Verter,

  You can change the values in your sample of spot, but you need to check a lot of things before.

  for example, you can do something like this:

  var Vcolor = app.activeDocument.swatches.getByName("Varnish");
  if (Vcolor.color.spot.colorType == ColorModel.SPOT && Vcolor.color.spot.spotKind == SpotColorKind.SPOTCMYK) {
      alert("Black value before: "+Vcolor.color.spot.color.black);
      Vcolor.color.spot.color.black= 0; // and so on
      alert("Black value after: "+Vcolor.color.spot.color.black);
      }
  

  This will change the black value of the task of CMYK color with name Nail Polish 0

  Have fun

• Change the value of the DefaultTimeToWait parameter

  I need 2 change the value of the parameter DefaultTimeToWait of its current value.

  To display the parameter, in the client on the ESX VI, click the configuration-> storage adapters tab then click on ISCSI (usually vmhba33/34) map properties, then click Advanced. The value is grayed out and cannot be changed.

  Does anyone know where it is fixed?

  Madrilleno

  Madrilleno,

  I do not have a link.  Your support contact can probably provide some information.

  The description that you have obtained is accurate enough.  In some unusual cases, a frame is sent of ESX with the wrong source MAC address.  Given that the

  response to this frame is never to where it is supposed to go, it's as if the answer was abandoned.  Once a Nop come to this session, the Nop expires and the connection is reset.  (This is how the Nop should work.  The problem is the answer is to have misdirected and lost.)

  Thank you

  Andy

• changing the value of text within a column of a PivotTable

  Hi people,

  I get great help from this forum and I am very frequently. This time, I have a question about Tables, how to manipulate fields in a table using JavaScript. The requirement is as follows, I have a Table (100rows x 3columns), and few of them are hidden in the page layout. The first column contains the values of text such as sequential numbers, (the first column is visual index, 1, 2, 3... 100). now, I'm trying to write a script that replaces or substitutes the first column values in the text areas of space. Can you guys help out me if you do a script? or give me some resources where I can manipulate the fields from the table using JavaScript?

  Thanks in advance.

  Hello

  It seems that the table is static and will always three rows during execution. In other words, the user cannot add more lines. If this correct?

  You need not resolve the nodes in this case, because you are referencing fields and specific lines.

  Because the script is located in the square, which is in the same container as the table, the following would erase the contents of the fields in the second column:

  Table1.Row1[1].TextField3.rawValue = null;
  

  Your script accesses an object in the second row called Cell1. This seems to be a text object has no property .rawValue If you want to change the value at run time, you will need to change this to a TextField object.

  In addition, looks like that is not an object in the second row (Row1 [1]) called "Cell1". It seems that the first object is unnamed. This will also cause the script to fail. When debugging, it is useful to use the JavaScript Console to see the (control + J) errors when previewing the form or in Acrobat.

  Who help me?

  Niall

• PROBLEM changing the value of a variable in my scene movieclip

  Hello
  I have a problem changing the value of a variable in my scene movieclip. I explain: I combobox on my stage containing the categories, and in the scene that I load an xml file containing links to php files that work with the combobox control.
  On the stage I have a movieclip "camera roll" inside this movieclip on the first image I have a php script file selected in the scene of loading. I use a function with a variable load() "theUrl" inside like this: T.load (theUrl);
  In my scene, I want to change the value of "theUrl" within the film of movieClip. I tried filmstrip.theUrl = url; But it does not work

  the xml file
  <?xml version="1.0" encoding="ISO-8859-1"?>
  <slideshow>
  <area title1="10 Last updated" link1="link1.php"/>
  <area title1="special" link1="link2.php"/>
  </slideshow>

  Here is the code on my stage:

  var link1:Array = new Array();
  var LINK:String;
  var url:String;
  var whoOn:Number;
  whoOn=0;
  var x:XML = new XML();
  x.ignoreWhite = true;
  x.onLoad = function(success) {
  var photos:Array = this.firstChild.childNodes;
  for (i=0; i<photos.length; i++) {
  _root.link1.push(photos[i].attributes.link1);
  }
  url=link1[whoOn];
  filmstrip.theUrl=url;//<<--HERE
  };
  x.load("category.xml");
  
  var cbListener:Object = new Object();
  cbListener.change = function(event_obj:Object) {
  trace(select.selectedItem.label);
  if (select.selectedItem.label == "Last updated") {
  whoOn=0;
  } else if (select.selectedItem.label == "Special") {
  whoOn=1;
  }
  url=link1[whoOn];
  filmstrip.theUrl=url; //<<-----HERE   
  };
  select.addEventListener("change",cbListener);
  
  

  Here is the code inside the clip "film".

  var T:XML = new XML();
  T.ignoreWhite = true;
  T.onLoad = function(xml) { 
  etc etc etc }
  
  T.load(theUrl);    //<<---HERE it still undefined

  the code on the timeline of the film should be placed in a function() (or better, move all your code to the main timeline).  but, if you leave the code on the timeline of the film strip, call the function that contains this code whenever the url changes.