Changing waveform offset

Similar Questions

• Change the offset of the window: Mac OSX

  Hi all:

  I currently encounter some problems when executing hearing 5.5 on an iMac OSX 10.6 (2.7 GHz Quad core i5 / 4 GB). Talked to adobe [which was comical] support and they had no idea what it was. Here's just a sample of what's going on:

  Zoom is extremely laggy during playback and stop. Scroll in waveform and it takes a solid 3 seconds to realize I want to zoom. What's worse, is that if I try to toggle playback during the zoom, it's game over. He must honestly 4 seconds for it to finally stop playing and glitchily to zoom out. I even install a hardware monitor to record what was going on while doing this and everything has been almost idling; CPU, GPU, memory, everything. But the hearing was off silently have a heart attack. I tried to adjust some settings latency to see if maybe that was, but no dice. Come a few not admin, prefs deleted, everything except the relocation with the tech guy but nothing. I would like to reinstall, but honestly I don't think that is the question. There is not yet any delay in multitrack view. So I am at a loss.

  I guess what I'm looking for, what if someone else has experienced this problem. We use on our terrible PC with zero problems 3.0. It is a little irritating to have your boss purchase this software [expensive], explaining that it will be exactly the same if not better than CS3, only to have it almost unusable. Any help would be appreciated!

  Reid

  Spent some time digging in this on different systems in our lab and have information.

  The first has to do with the scroll wheel of mouse OS X Messaging at the OS level.  The operating system will appear in the queue and send EACH scrolling ' click on ' so if you are quick, has thousands of messages scrolling is generated for each increment of small and sent instead to collect a single "swipe" and generates a message with a large increment.  It was discovered and addressed during the CS 5.5 development cycle, but in my opinion, it's still not as smooth as similar actions under Windows.

  However, which still doesn't explain the extreme performance, you have described.  While we had not all the systems that were identical to yours, many were close.  I also found zoom in 10.6.8 performance degradation when the iMac, I used had a Radeon HD 4850 graphics chip.  You can check what specific graphic system is in your iMac?  You can find it by clicking on the Apple icon in the upper left corner, select about this Mac, by clicking on the 'info' button, then clicking on hardware > monitors/video cards.

  If you are able to capture a little video clip of this behavior, it would be useful to see if it is close to what I saw.  Operation of a zoom that felt much slower with this configuration on other systems of mac, I tried to make a small selection and then click on the 'Zoom to selection' button (SHIFT + S as a shortcut.)  On most systems, it's snapshot, but with the Radeon graphics chip, it took more than a second to perform the operation.

  Thank you.

• Graphical evolution of waveform changes during execution

  Hello

  I'm just started learning Labview graphical programming. It's so interesting that text-based programming.

  The first issue is of course acquire analyze and display. But on the screen how to change the X axis and Y, scale of the axes during execution values.

  Maybe you should b a little more clearly what kind of values you want to change. (range, offset, multiplier, etc..)

  For example, to change the interval-y, yscale user property...... minimum or maximum range. The interval-x is a little more complicated, because you're dealing with a graph, when the x offset the changes automatically the history buffer is updated.

  Of course you must also make sure to disable autoscaling, else it will be for the next update.

  You can also change the formatting of the x axis. at the moment you show zero decimal digits. Also an axis 'style' with a few values more would be better.

• offset and the multiplier

  Hello

  I want to start this graph from scratch by changing the offset property and the multiplier chart. How can I do this?

  

  -It will be nice if you can crop or only required post image/screenshot region instead of this huge screenshot including very little info.
  -Graphic right click > properties > scale > you have the required parameters.

• table update, cancel the change, another session could ' get value changes in 10g

  Edit data in a table, then advanced to change its original value. In general another session could get changed by advanced in select value but it not work. After the "starting strength" I can get it.

  I did this test in 11.2.0.3 and I get the value without the "starting strength". Who can tell me why? Thank you very much.

  ORACLE 10.2.0.1, OS rhel5.4 x86_64
  
  session1:

  SQL > create table ty (name varchar (20));

  Table created.

  SQL > insert into ty values ('XXXX');

  1 line of creation.

  SQL > commit;

  Validation complete.

  SQL > update ty set name = "YYYY";

  1 line update.

  SQL >

  session2:

  change cancel

  Select

  INDX,

  ktuxesta,

  ktuxecfl,

  ktuxesqn,

  ktuxesqn envelope #.

  ktuxescnw scnW,

  SNCB ktuxescnb,

  ktuxerdbf dba_file,

  ktuxerdbb dba_block,

  nub ktuxesiz

  Of

  x$ ktuxe

  where

  ktuxesta = 'ACTIVE '.

  ;

  KTUXESTA KTUXECFL KTUXESQN # SCNW DBA_FILE DBA_BLOCK NUB SNCB WRAP INDX

  ---------- ---------------- ------------------------ ---------- ---------- ---------- ---------- ---------- ---------- ----------

  263 ACTIVE NO 4 4 0 736229 5 59 1

  BED > define dba 5,59

  S/N 0X0140003B (5,59 20971579)

  BED > find/c XXXX

  File: /oracle/oradata/ora10/undotbs02.dbf (5)

  Block: 59 Offsets: 1361 in 1872 Dba:0x0140003b

  ------------------------------------------------------------------------

  58585858 0000000c 00480020 001 0002 001300e2 00000000 01000000 010000e2 c

  0000000b 01140008 0401003 b fd070000 00000086 fd070000 a 00400101 002, 0086

  00000019 0de30277 00000000 00000000 00000000 00000004 016d18bc 9c0a0000

  2a 000010 0000005 00170004 002b 0000 00400101 9c0a00ba 80000075 0e4000b9 b

  0e4000ff 12058102 0000002c 0000002f 00070600 00040001 00000002 c1170180

  01800778 72021315 162e0180 0180000c 00180010 001 0002 00150005 02000005 c

  02000000 00000000 0000000b 01133000 00040002 016d18bc 2a00003b 00400101

  002e0008 10400001 12058101 00000065 00090700 00070002 0000002c 104000ff

  00000001 80018001 80018001 8002c 109 07787202 1315162e 0000000c 00180010

  001C 0002 00150005 02000005 02000000 00000000 0000000 01132f00 00040002 b

  016d18bc 2a00003b 00400101 002f0007 10400001 104000ff 12058102 0000002c

  00000037 00090700 00070002 00000002 01800180 01800180 07787202 c10e0180

  1315162e 0000000c 00180010 001 0002 00150005 02000005 02000000 00000000 c

  0000000b 01132e00 00040002 016d18bc 2a00003b 00400101 002c 0007 10400001

  104000ff 12058102 00000036 00090700 00070002 00000002 c10e0180 0000002c

  01800180 01800180 07787202 1315162e 0000000c 00180010 001 0002 00150005 c

  < 32 bytes per line >

  BED > d/v s/n 1361 offset 5.59 County 10

  File: /oracle/oradata/ora10/undotbs02.dbf (5)

  Block: 59 Offsets: Dba:0x0140003b 1361 to 1370

  -------------------------------------------------------

  58585858 0000000c l 0048 XXXX... H

  < 16 bytes per line >

  BED >

  BED > change/c Davis dba 5,59 1361 offset

  WARNING: the content of previous BIFILE will be lost. Move forward? Y (Y/N)

  File: /oracle/oradata/ora10/undotbs02.dbf (5)

  Block: 59 Offsets: Dba:0x0140003b 1361 to 1370

  ------------------------------------------------------------------------

  44444444 0000000c 0048

  < 32 bytes per line >

  BED > sum dba 5,59 apply

  Check file 5, block 59 value:

  current = 0x0c0a, required = 0x0c0a

  BED > d/v s/n 1361 offset 5.59 County 10

  File: /oracle/oradata/ora10/undotbs02.dbf (5)

  Block: 59 Offsets: Dba:0x0140003b 1361 to 1370

  -------------------------------------------------------

  44444444 0000000c l 0048 Davis... H

  < 16 bytes per line >

  BED >

  session3:

  SQL > conn / as sysdba

  Connected.

  SQL > alter system flush buffer_cache;

  Modified system.

  SQL > alter system flush shared_pool;

  Modified system.

  SQL > conn ty/ty

  Connected.

  SQL > select * from ty.

  NAME

  --------------------

  XXXX

  SQL >

  SQL > startup force

  ORACLE instance started.

  Total System Global Area 285212672 bytes

  Bytes of size 2020192 fixed

  83889312 variable size bytes

  192937984 of database buffers bytes

  Redo buffers 6365184 bytes

  Mounted database.

  Open database.

  SQL > conn ty/ty

  Connected.

  SQL > select * from ty.

  NAME

  --------------------

  DELALANDE

  SQL >

  In 11g

  Oracle OS: RHEL X86_64 6.2 11.2.0.2

  session1:

  SQL > select * from test;

  NAME

  --------------------

  XXXX

  SQL > update test set name = "YYYY";

  1 line update.

  SQL >

  session2:

  SQL > /.

  KTUXESTA KTUXECFL KTUXESQN # SCNW DBA_FILE DBA_BLOCK NUB SNCB WRAP INDX

  ---------- ---------------- ------------------------ ---------- ---------- ---------- ---------- ---------- ---------- ----------

  343 ACTIVE NO 1288 1288 0 1738249 3 242 1

  BED > set s/n 3 242

  S/N 0X00C000F2 (12583154 3 242)

  BED > find/c XXXX

  File: /oradata/oradata/ora10/undotbs01.dbf (3)

  Block: 242 Offsets: 5741 to 6252 Dba:0x00c000f2

  ------------------------------------------------------------------------

  58585858 0000000 c 004 c 0020 0002 001400 010000 00000000 01000000 cd cd 001C

  0000000b 01130008 010000 00014 010e00ed 7d1a0000 00C 000000f2 0c 000000ee

  7d1a0000 530c8b99 861 000000f8 has 0000 00000 00000000 00000004 00C 00d7dbf2

  0de4dbff 7e000005 00200004 c 0500007 01b 00024 012f0000 80000096 861a 0062

  0c 400060 0c4000ff 12058101 0000002c 00070600 00030001 00000002 00db005c

  c10702c1 79640b0b 07018007 14151601 80018016 001d000c 004c 0020 00020002

  00020007 00010001 000000 cd cd b 010000 00000000 01000000 0000000, 01060008

  0c 010000 00014 000000ed 00000090 7d1a0000 7d1a0000 010d00c6 00C 000000f2

  cea43485 861 has 0000 00000 00000000 00000004 8fb30005 0d 000000 00C 000000f1

  001f0004 c 0500007 01b 00024 012e0000 861a 0062 80000082 0c 400060 0c4000ff

  0000002c 12050101 00db0054 000706ff 00040005 00020003 00000001 ff000000

  000600c 1 3f0000c1 610000c 1 16000079 640b0b14 15160080 00000080 0000000 c

  c 004 0020 0002 001400cd 010000 00000000 01000000 0000000b 01210008 cd 001C

  0c 010000 000000f2 00C 7c1a0000 000000C6 7d1a0000 00000090 00014 010c006f

  861a 0000 00000 00000000 00000004 0de4dbff 7e000005 06C 00000065 cea43471

  001C 0004 0500007c 01b 00024 012d 0000 8000006e 861a 0062 0c 400060 0c4000ff

  < 32 bytes per line >

  BED > change the offset of 3 242 s/n/c Davis 5741

  WARNING: the content of previous BIFILE will be lost. Move forward? Y (Y/N)

  File: /oradata/oradata/ora10/undotbs01.dbf (3)

  Block: 242 Offsets: 5741 to 6252 Dba:0x00c000f2

  ------------------------------------------------------------------------

  44444444 0000000c 004c 0020 0002 001400cd 010000 00000000 01000000 cd 001C

  0000000b 01130008 010000 00014 010e00ed 7d1a0000 00C 000000f2 0c 000000ee

  7d1a0000 530c8b99 861 000000f8 has 0000 00000 00000000 00000004 00C 00d7dbf2

  0de4dbff 7e000005 00200004 c 0500007 01b 00024 012f0000 80000096 861a 0062

  0c 400060 0c4000ff 12058101 0000002c 00070600 00030001 00000002 00db005c

  c10702c1 79640b0b 07018007 14151601 80018016 001d000c 004c 0020 00020002

  00020007 00010001 000000 cd cd b 010000 00000000 01000000 0000000, 01060008

  0c 010000 00014 000000ed 00000090 7d1a0000 7d1a0000 010d00c6 00C 000000f2

  cea43485 861 has 0000 00000 00000000 00000004 8fb30005 0d 000000 00C 000000f1

  001f0004 c 0500007 01b 00024 012e0000 861a 0062 80000082 0c 400060 0c4000ff

  0000002c 12050101 00db0054 000706ff 00040005 00020003 00000001 ff000000

  000600c 1 3f0000c1 610000c 1 16000079 640b0b14 15160080 00000080 0000000 c

  c 004 0020 0002 001400cd 010000 00000000 01000000 0000000b 01210008 cd 001C

  0c 010000 000000f2 00C 7c1a0000 000000C6 7d1a0000 00000090 00014 010c006f

  861a 0000 00000 00000000 00000004 0de4dbff 7e000005 06C 00000065 cea43471

  001C 0004 0500007c 01b 00024 012d 0000 8000006e 861a 0062 0c 400060 0c4000ff

  < 32 bytes per line >

  BED > apply sum s/n 3 242

  Check file 3, block 242 value:

  current = 0xae88, required = 0xae88

  BED >

  session3:

  SQL > alter system flush buffer_cache;

  Modified system.

  SQL > conn ty/ty

  Connected.

  SQL > select * from test;

  NAME

  --------------------

  DELALANDE

  SQL >

  SQL > select version of v$ instance;

  Version

  -----------------

  11.2.0.2.0

  SQL >

  Hell _in_memory_undo parameter

• Menu animated - tile Offset is empty

  I use the first Elements 8 on a Windows 7 PC.  I'll put up my menus to drive for 10 scenes, all with a Motion Menu button.  I have successfully installed three of the 10 scenes, but the other 7 are in black and white.  I tried to change the offset of the tile by entering a value and rubbing them, but she is still a Virgin.  What I am doing wrong?

  Winslow,

  I'm glad that you were able to get the project work.

  I would always omit the marker to stop at the end of the timeline, as it is not necessary, and have an a caused problems for many.

  I had worked on a similar DVD to yours, but one of my 'test' a calendar. I had manually spread my along she and Previewed chapter markers. Then the closer and closer in some places. Still a fine. I then offset, by the method you describe - washing of gases, and it still worked. I had to stop markers and chapter markers, to return to the main Menu for each "chapter". Always worked. I was unable to replicate what you saw, but then didn't work on my calendar, so there WERE differences, but do not know what I was missing in my test because I could not display thumbnails, you had. Something was different, and then you beat me to the punch, by getting your project to behave properly.

  Don't you think that it was the offset in your original project, which caused the problem?

  For me, it was a good exercise, because, as I said, I use Adobe Encore and no pre to the author, so I had little practice with the creation in pre. There are some differences between these two programs, although they share a bit of the same code. I also learned to dust off Steve PrE book, just to refresh my memory about the creation. Thank you for to be in pre, exploring its capabilities and get me back on Muvipix Guide to pre.

  Thank you for reporting your success, and if all goes well, then you can mark your thread as response - by this article: http://forums.adobe.com/thread/1058744?tstart=0

  Good luck

  Hunt

• Offset ball and divide distance of gutter

  Is it possible to change the offset between a chip and the text he "balls"? And is there a way to reduce the gutter in the new paragraph split function. The Division works well, but the gap looks like a fence with a missing card or a scale divided in front my eyes your teeth. I adjusted it too small as it will go, but was still not convinced.

  Thank you

  Joe

  The left indent of the paragraph to something small style and first line indent has a corresponding negative value. If the value is too small for the width of the ball, ID will add a tab between the bullet and the text, but if you inclrease the value slightly it should be good. Somewhere around de.08 type pt 12 inches seems about as small as you want to go.

• What exactly does Inline object offset 'Y '?

  Hello world

  I'm confused on the subject line y offset. Does that mean exactly? I looked on the help of adobe, here's what it says.

  Inline
  Aligns the object anchored with the baseline of the insertion point. You can adjust the offset Y to position the object above or below the base line. This is the default type of the anchored object. In earlier versions of InDesign, these objects were called graphics.

  Then. the baseline is the insertion point?  If the offset is a negative number, doesn't mean that the base line moves upward? How is the object does not move? assistance from adobe say, 'solve it is offset to position the object above or below the base line', it means not the base line should stay and the object moves as a result?

  Thank you very much!

  The behavior of inlines is also linked to the leadingof of the line in which they find themselves. When the line spacing specified, a line the line begins with the lower edge on the base line and spacing for the whole line is adjusted height of the inserted object. Change the offset y in such cases would appear to make the object appear fixed while moving the base line upwards or downwards. Is happening what is the amount of 'auto' driving is being adjusted to compensate for the offset.

  If the line that the object is inserted using a fixed attack, this attack is in the spotlight, and the inserted object can cover part of the text above. Change the offset will make the Forum appear to move upward or to the low bit at the base, which will be fixed by the assigned key.

  You can also find this discussion from the other day, to be useful: http://forums.adobe.com/message/2722774#2722774

• kernel panic xpcproxy

  Hello world

  Every now and then my macbook pro (mid-2011, 15 inches, 16g of RAM from Crucial) suddenly crashes without warning.

  I checked the material and everything works fine, so I guess the software.

  I get the following report:

  Anonymous UUID: 73B8C91E-A73E-D455-191F-DD2612E03A67

  Mon 8 Feb 10:38:43 2016

  Panic report *.

  panic (the appellant 2 cpu 0xffffff802eb6beed): "an element of the liberated area was changed in the box MAC Labels: expected 0xffffff8053b39e80 but found 0xffffff8051b39e80, 0 x 2000000 bits changed, at offset 0 64 in the 0xffffff8051b39ec0 element, cookies 0x3f00111253cf4fbe 0x53521b7ac093bf5"@/SourceCache/xnu/xnu-2782.50.1/osfmk/kern/zalloc.c:496.

  Backtrace (2 CPU), Frame: Return address

  0xffffff8219103b60: 0xffffff802eb2ad21

  0xffffff8219103be0: 0xffffff802eb6beed

  0xffffff8219103c50: 0xffffff802eb6b9f1

  0xffffff8219103c90: 0xffffff802eb6a837

  0xffffff8219103dc0: 0xffffff802f12fa3c

  0xffffff8219103de0: 0xffffff802efa4789

  0xffffff8219103e10: 0xffffff802efa683c

  0xffffff8219103e40: 0xffffff802efa3c9b

  0xffffff8219103f00: 0xffffff802efd03b5

  0xffffff8219103f50: 0xffffff802f04b376

  0xffffff8219103fb0: 0xffffff802ec344a6

  The process corresponding to the current thread BSD name: xpcproxy

  Mac OS version:

  14F1509

  Kernel version:

  14.5.0 Darwin kernel version: kills Sep 1 21:23:09 PDT 2015; root:XNU-2782.50.1~1/RELEASE_X86_64

  Kernel UUID: 06D286E3-A8A1-3BE7-A7EB-EAC6E0C69758

  Slide kernel: 0x000000002e800000

  Text of core base: 0xffffff802ea00000

  Text __HIB base: 0xffffff802e900000

  Name of system model: MacBookPro9, 1 (Mac-4B7AC7E43945597E)

  Availability of the system in nanoseconds: 83534892688

  last load kext to 66728331716: com.apple.driver.AudioAUUC 1.70 (addr 0xffffff7fb1006000 size 32768)

  kexts responsible:

  com.apple.driver.AudioAUUC 1.70

  com.apple.driver.AppleGraphicsDevicePolicy 3.7.7

  com.apple.driver.AppleHWSensor 1.9.5d0

  com.apple.driver.AGPM 110.19.6

  com.apple.driver.ApplePlatformEnabler 2.2.0d4

  com.apple.driver.X86PlatformShim 1.0.0

  com Apple.filesystems.autofs 3.0

  com.apple.iokit.IOBluetoothSerialManager 4.3.6f3

  com.apple.driver.AppleMikeyHIDDriver 124

  com.apple.driver.AppleOSXWatchdog 1

  com.apple.driver.AppleMikeyDriver 272.18.3

  com.apple.driver.AppleHDAHardwareConfigDriver 272.18.3

  com.apple.driver.AppleHDA 272.18.3

  com.apple.driver.AppleUpstreamUserClient 3.6.1

  com.apple.iokit.IOBluetoothUSBDFU 4.3.6f3

  com.apple.GeForce 10.0.4

  com.apple.driver.AppleLPC 1.7.3

  com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.3.6f3

  com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0

  3.10.25 com.apple.driver.AppleMuxControl

  com.apple.driver.AppleFIVRDriver 4.1.0

  com.apple.driver.AppleIntelHD4000Graphics 10.0.6

  com.apple.nvidia.NVDAStartup 10.0.4

  com.apple.driver.AppleSMCPDRC 1.0.0

  com.apple.driver.AppleIntelFramebufferCapri 10.0.6

  com.apple.driver.SMCMotionSensor 3.0.4d1

  com.apple.driver.AppleBacklight 170.7.4

  com.apple.driver.AppleMCCSControl 1.2.12

  com.apple.driver.AppleSMCLMU 2.0.7d0

  com.apple.iokit.IOUserEthernet 1.0.1

  com.apple.Dont_Steal_Mac_OS_X 7.0.0

  com.apple.driver.AppleHWAccess 1

  com.apple.driver.AppleHV 1

  com.apple.driver.AppleIntelSlowAdaptiveClocking 4.0.0

  com.apple.driver.AppleThunderboltIP 2.0.2

  com.apple.driver.AppleUSBTCButtons 240.2

  com.apple.driver.AppleUSBTCKeyEventDriver 240.2

  com.apple.driver.AppleUSBTCKeyboard 240.2

  com.apple.driver.AppleIRController 327,5

  com.apple.driver.AppleFileSystemDriver 3.0.1

  com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1

  com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0

  com.apple.BootCache 36

  com.apple.driver.AppleUSBHub 705.4.2

  com.apple.iokit.SCSITaskUserClient 3.7.5

  com.apple.driver.XsanFilter 404

  com.apple.iokit.IOAHCIBlockStorage 2.7.1

  com.apple.iokit.IOAHCIPassThrough 1.0.3

  com.apple.driver.AirPort.Brcm4331 800.20.24

  com.apple.driver.AppleSDXC 1.6.5

  com.apple.iokit.AppleBCM5701Ethernet 10.1.3

  com.apple.driver.AirPort.Brcm4360 930.37.3

  com.apple.driver.AppleFWOHCI 5.5.2

  com.apple.driver.AppleAHCIPort 3.1.2

  com.apple.driver.AppleUSBEHCI 705.4.14

  com.apple.driver.AppleUSBXHCI 710.4.11

  com.apple.driver.AppleSmartBatteryManager 161.0.0

  com.apple.driver.AppleACPIButtons 3.1

  com.apple.driver.AppleRTC 2.0

  com.apple.driver.AppleHPET 1.8

  com.apple.driver.AppleSMBIOS 2.1

  com.apple.driver.AppleACPIEC 3.1

  com.apple.driver.AppleAPIC 1.7

  com.apple.driver.AppleIntelCPUPowerManagementClient 218.0.0

  com Apple.NKE.applicationfirewall 161

  com Apple.Security.Quarantine 3

  com.apple.security.TMSafetyNet 8

  com.apple.driver.AppleIntelCPUPowerManagement 218.0.0

  com Apple.kext.Triggers 1.0

  com.apple.iokit.IOSerialFamily 11

  com.apple.driver.DspFuncLib 272.18.3

  com.apple.kext.OSvKernDSPLib 1.15

  com.apple.nvidia.driver.NVDAGK100Hal 10.0.4

  com.apple.nvidia.driver.NVDAResman 10.0.4

  com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.3.6f3

  com.apple.driver.IOPlatformPluginLegacy 1.0.0

  3.10.25 com.apple.driver.AppleGraphicsControl

  com.apple.driver.AppleSMBusPCI 1.0.12d1

  com.apple.driver.AppleHDAController 272.18.3

  com.apple.iokit.IOHDAFamily 272.18.3

  com.apple.iokit.IOAudioFamily 203.3

  com.apple.vecLib.kext 1.2.0

  com.apple.iokit.IOAcceleratorFamily2 156.16

  3.10.25 com.apple.AppleGraphicsDeviceControl

  com.apple.driver.X86PlatformPlugin 1.0.0

  com.apple.driver.IOPlatformPluginFamily 5.9.1d7

  com.apple.driver.AppleBacklightExpert 1.1.0

  com.apple.iokit.IONDRVSupport 2.4.1

  com.apple.driver.AppleSMBusController 1.0.13d1

  com.apple.iokit.IOUSBUserClient 705.4.0

  com.apple.iokit.IOFireWireIP 2.2.6

  com.apple.iokit.IOSurface 97.4

  com.apple.iokit.IOGraphicsFamily 2.4.1

  com.apple.iokit.IOBluetoothFamily 4.3.6f3

  com.apple.driver.AppleSMC 3.1.9

  com.apple.iokit.IOSlowAdaptiveClockingFamily 1.0.0

  com.apple.driver.AppleThunderboltEDMSink 4.0.3

  com.apple.driver.AppleThunderboltDPOutAdapter 4.0.6

  com.apple.driver.AppleUSBMultitouch 245.2

  com.apple.iokit.IOUSBHIDDriver 705.4.0

  com.apple.driver.AppleUSBMergeNub 705.4.0

  com.apple.driver.AppleUSBComposite 705.4.9

  com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.7.5

  com.apple.iokit.IOBDStorageFamily 1.7

  com.apple.iokit.IODVDStorageFamily 1.7.1

  com.apple.iokit.IOCDStorageFamily 1.7.1

  com.apple.driver.AppleThunderboltDPInAdapter 4.0.6

  com.apple.driver.AppleThunderboltDPAdapterFamily 4.0.6

  com.apple.driver.AppleThunderboltPCIDownAdapter 2.0.2

  com.apple.iokit.IOAHCISerialATAPI 2.6.1

  com.apple.iokit.IOSCSIArchitectureModelFamily 3.7.5

  3.1.7 com.apple.driver.AppleThunderboltNHI

  com.apple.iokit.IOThunderboltFamily 4.2.2

  com.apple.iokit.IOEthernetAVBController 1.0.3b3

  com.apple.iokit.IO80211Family 730.60

  com.apple.driver.mDNSOffloadUserClient 1.0.1b8

  com.apple.iokit.IONetworkingFamily 3.2

  4.5.8 com.apple.iokit.IOFireWireFamily

  com.apple.iokit.IOAHCIFamily 2.7.5

  com.apple.iokit.IOUSBFamily 720.4.4

  com.apple.driver.AppleEFINVRAM 2.0

  com.apple.driver.AppleEFIRuntime 2.0

  com.apple.iokit.IOHIDFamily 2.0.0

  com.apple.iokit.IOSMBusFamily 1.1

  com Apple.Security.sandbox 300.0

  com.apple.kext.AppleMatch 1.0.0d1

  com.apple.driver.AppleKeyStore 2

  com.apple.driver.AppleMobileFileIntegrity 1.0.5

  com.apple.driver.AppleCredentialManager 1.0

  com.apple.driver.DiskImages 398

  com.apple.iokit.IOStorageFamily 2.0

  com.apple.iokit.IOReportFamily 31

  com.apple.driver.AppleFDEKeyStore 28.30

  com.apple.driver.AppleACPIPlatform 3.1

  com.apple.iokit.IOPCIFamily 2.9

  com.apple.iokit.IOACPIFamily 1.4

  com.apple.kec.Libm 1

  com Apple.KEC.pthread 1

  com Apple.KEC.corecrypto 1.0

  Model: MacBookPro9, 1, MBP91.00D3.B0C of BootROM, 4 processors, Intel Core i7, 2.3 GHz, 16 GB, MSC 2.1f175

  Graphics card: Intel Graphics HD 4000, 4000, Intel HD graphics card integrated

  Graphics card: NVIDIA GeForce GT 650 M, NVIDIA GeForce GT 650 M, PCIe, 512 MB

  Memory module: BANK 0/DIMM0, 8 GB, DDR3, 1600 MHz, 0x859B, 0x43543130323436344246313630422E433136

  Memory module: BANK 1/DIMM0, 8 GB, DDR3, 1600 MHz, 0x859B, 0x43543130323436344246313630422E433136

  Airport: spairport_wireless_card_type_airport_extreme (0x14E4, 0xF5), Broadcom BCM43xx 1.0 (7.15.166.24.3)

  Bluetooth: Version 4.3.6f3 16238, 3 services, 18 aircraft, 1 incoming serial ports

  Network service: Wi - Fi, AirPort, en1

  Serial ATA Device: APPLE HARD HTS545050A7E362, 500,11 GB disk

  Serial ATA Device: HL-DT-ST DVD - RW GS41N

  USB device: Hub

  USB device: FaceTime HD camera (built-in)

  USB device: Hub

  USB device: Hub

  USB device: Hub BRCM20702

  USB Device: USB Bluetooth host controller

  USB Device: IR receiver

  USB device: Apple keyboard / Trackpad

  Bus crush: MacBook Pro, Apple Inc., 25.1

  Would be great if someone could help me solve this kernel panic/crash...!

  Concerning

  You could try and isolate the cause or help out as much as possible

  and then at some point, if no front wheel drive can occur, arrange a visit to a

  Apple Store with Genius (they can search on the computer) or an authorized Apple

  Service provider; Among these are designations of premium or a specialist where

  available which can also be permitted at Apple, companies independent retailers.

  • Try safe mode if your Mac does not end commissioning - Apple Support

  Any kernel panic messages and routines that can help to determine their cause

  or their scope; and sometimes a way to solve...

  • OS X Yosemite: If your Mac restarts and a message

  Read the link above and try what is suggested to see what details are drawn.

  The first link shows Safe Mode instructions as a way to start + troubleshoot.

  Something else to try to see if the effect is a software is to try another user account:

  • How to test a problem in another account user on your Mac - Apple Support

  Other useful ideas and suggestions can be found in other related sources:

  • Generic "Resolve Kernel Panic" instructions + troubleshooting - the XLab:

  http://www.thexlab.com/FAQs/kernelpanics.html

  • Technical note TN2063: understanding and debugging the kernel panics:

  https://developer.Apple.com/library/Mac/TechNotes/tn2063/_index.html

  Because hardware and software leads behind the kernel panics, the message

  refers to a starting point. The technical Note shows details on debugging

  or understand the messages coded; Although dating a bit it is a resource fair.

  At 01:30 Monday...

  Good luck to this issue!

• Bumpy applying the last SECURITY FIX

  Ouch!

  several reboots after downloading updates of today

  Finally this bug (sent to apple) - report something obvious to everyone here:

  Anonymous UUID: [redacted]

  Fri Jan 20 17:36:12 2016

  Panic report *.

  panic (cpu 5 0xffffff802fd254ce appellant): "an element of the liberated area has changed the area of knote area: expected 0xffffff8081e0a640 but found 0xffffff808160a640, wicks 0 x 800000 changed to offset 0 of 144 in the 0xffffff8081e0a5b0 element, cookies 0x3f0011c505fa729e 0x53521427af3014b"@/Library/Caches/com.apple.xbs/Sources/xnu/xnu-3248.30.4/osfm k/kern/zalloc.c:503.

  Backtrace (CPU 5), frame: return address

  0xffffff93e1c7bad0: 0xffffff802fcdf792

  0xffffff93e1c7bb50: 0xffffff802fd254ce

  0xffffff93e1c7bbc0: 0xffffff802fd24f76

  0xffffff93e1c7bc00: 0xffffff802fd23c02

  0xffffff93e1c7bd30: 0xffffff803018e7d9

  0xffffff93e1c7bdc0: 0xffffff8030190cef

  0xffffff93e1c7bf00: 0xffffff803018e342

  0xffffff93e1c7bf60: 0xffffff803022a731

  0xffffff93e1c7bfb0: 0xffffff802fdf0a36

  The process corresponding to the current thread BSD name: cfprefsd

  Mac OS version:

  15 D 21

  Kernel version:

  15.3.0 Darwin kernel version: Thu Dec 10 18:40:58 PST 2015; root:XNU-3248.30.4~1/RELEASE_X86_64

  Kernel UUID: DECC9F02-27D7-31F0-9599-A9EF2873902C

  Slide kernel: 0x000000002fa00000

  Text of core base: 0xffffff802fc00000

  Text __HIB base: 0xffffff802fb00000

  Name of system model: iMac12, 2 (Mac-942B59F58194171B)

  Availability of the system in nanoseconds: 29462377266

  last load kext to 20122636230: com.apple.driver.AudioAUUC 1.70 (addr 0xffffff7fb18a4000 size 32768)

  kexts responsible:

  com TrustedData.driver.VendorSpecificType00 1.7.0

  com.drobo.SCSI.ThunderBolt 1.1 [77097]

  com Logitech.Unifying.HID Driver 1.3.1

  com Logitech.Control Center.HID Driver 3.9.1

  com.apple.driver.AudioAUUC 1.70

  com.apple.driver.AppleHWSensor 1.9.5d0

  com.apple.driver.AppleTyMCEDriver 1.0.2d2

  com.apple.driver.AGPM 110.20.22

  com Apple.filesystems.autofs 3.0

  com.apple.driver.AppleOSXWatchdog 1

  com.apple.driver.AppleMikeyHIDDriver 124

  com.apple.driver.AppleMikeyDriver 272.51.3

  com.apple.driver.ApplePolicyControl 3.12.6

  com.apple.driver.AppleHDAHardwareConfigDriver 272.51.3

  com.apple.driver.AppleHDA 272.51.3

  com.apple.driver.AppleUpstreamUserClient 3.6.1

  com Apple.Driver.pmtelemetry 1

  com.apple.kext.AMDFramebuffer 1.4.0

  com.apple.iokit.IOUserEthernet 1.0.1

  com.apple.driver.AppleIntelHD3000Graphics 10.0.0

  com.apple.iokit.IOBluetoothSerialManager 4.4.3f4

  com.apple.AMDRadeonX3000 1.4.0

  com.apple.Dont_Steal_Mac_OS_X 7.0.0

  com.apple.driver.AppleHV 1

  com.apple.driver.AppleFIVRDriver 4.1.0

  com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.4.3f4

  com.apple.driver.AppleSMCPDRC 1.0.0

  com.apple.driver.AppleLPC 3.1

  com.apple.driver.AppleSMCLMU 208

  com.apple.driver.AppleMuxControl 3.12.6

  com.apple.driver.AppleBacklight 170.8.8

  com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0

  com.apple.driver.AppleIntelSlowAdaptiveClocking 4.0.0

  com.apple.driver.AppleThunderboltIP 3.0.8

  com.apple.kext.AMD6000Controller 1.4.0

  com.apple.driver.AppleIntelSNBGraphicsFB 10.0.0

  com.apple.driver.AppleMCCSControl 1.2.13

  com.apple.iokit.IOBluetoothUSBDFU 4.4.3f4

  com.apple.driver.AppleUSBStorageCoexistentDriver 3.7.1

  com.apple.driver.AppleUSBCardReader 3.7.1

  com.apple.driver.AppleIRController 327,5

  com.apple.driver.AppleFileSystemDriver 3.0.1

  com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1

  com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0

  com.apple.BootCache 38

  com.apple.iokit.SCSITaskUserClient 3.7.7

  2.8.5 com.apple.iokit.IOAHCIBlockStorage

  com.apple.iokit.AppleBCM5701Ethernet 10.1.12

  com.apple.driver.AppleFWOHCI 5.5.2

  com.apple.driver.AirPort.Atheros40 700.74.5

  com.apple.driver.AppleAHCIPort 3.1.8

  com.apple.driver.usb.AppleUSBEHCIPCI 1.0.1

  com.apple.driver.usb.AppleUSBUHCIPCI 1.0.1

  com.apple.driver.AppleRTC 2.0

  com.apple.driver.AppleACPIButtons 4.0

  com.apple.driver.AppleHPET 1.8

  com.apple.driver.AppleSMBIOS 2.1

  com.apple.driver.AppleACPIEC 4.0

  com.apple.driver.AppleAPIC 1.7

  com.apple.driver.AppleIntelCPUPowerManagementClient 218.0.0

  com Apple.NKE.applicationfirewall 163

  com Apple.Security.Quarantine 3

  com.apple.security.TMSafetyNet 8

  com.apple.driver.AppleIntelCPUPowerManagement 218.0.0

  com Apple.kext.Triggers 1.0

  com.apple.driver.DspFuncLib 272.51.3

  com.apple.kext.OSvKernDSPLib 525

  com.apple.iokit.IOSurface 108.0.1

  com.apple.iokit.IOSerialFamily 11

  com.apple.iokit.IOAcceleratorFamily2 205,1

  com.apple.driver.AppleSMBusPCI 1.0.14d1

  com.apple.driver.CoreCaptureResponder 1

  com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.4.3f4

  com.apple.iokit.IOSCSIParallelFamily 3.0.0

  com.apple.driver.AppleHDAController 272.51.3

  com.apple.iokit.IOHDAFamily 272.51.3

  com.apple.iokit.IOAudioFamily 204.3

  com.apple.vecLib.kext 1.2.0

  com.apple.iokit.IOFireWireIP 2.2.6

  com.apple.driver.AppleGraphicsControl 3.12.6

  com.apple.driver.AppleBacklightExpert 1.1.0

  com.apple.iokit.IONDRVSupport 2.4.1

  com.apple.driver.IOPlatformPluginLegacy 1.0.0

  com.apple.driver.IOPlatformPluginFamily 6.0.0d7

  com.apple.iokit.IOSlowAdaptiveClockingFamily 1.0.0

  com.apple.driver.AppleThunderboltEDMSink 4.1.1

  com.apple.kext.AMDSupport 1.4.0

  com.apple.AppleGraphicsDeviceControl 3.12.6

  com.apple.driver.AppleSMC 3.1.9

  com.apple.driver.AppleSMBusController 1.0.14d1

  com.apple.iokit.IOGraphicsFamily 2.4.1

  com.apple.driver.usb.IOUSBHostHIDDevice 1.0.1

  com.apple.iokit.IOUSBMassStorageClass 4.0.2

  com.apple.iokit.IOSCSIBlockCommandsDevice 3.7.7

  com.apple.iokit.IOUSBMassStorageDriver 1.0.0

  com.apple.driver.AppleThunderboltDPInAdapter 4.1.3

  com.apple.driver.AppleThunderboltDPOutAdapter 4.1.3

  com.apple.driver.AppleThunderboltDPAdapterFamily 4.1.3

  com.apple.driver.AppleThunderboltPCIUpAdapter 2.0.2

  com.apple.driver.AppleThunderboltPCIDownAdapter 2.0.2

  com.apple.driver.IOBluetoothHIDDriver 4.4.3f4

  com.apple.iokit.IOBluetoothFamily 4.4.3f4

  com.apple.iokit.IOUSBHIDDriver 900.4.1

  com.apple.driver.usb.AppleUSBHostCompositeDevice 1.0.1

  com.apple.driver.usb.AppleUSBHub 1.0.1

  com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.7.7

  com.apple.iokit.IOBDStorageFamily 1.8

  com.apple.iokit.IODVDStorageFamily 1.8

  com.apple.iokit.IOCDStorageFamily 1.8

  com.apple.driver.AppleXsanScheme 3

  com.apple.iokit.IOAHCISerialATAPI 2.6.2

  com.apple.iokit.IOSCSIArchitectureModelFamily 3.7.7

  com.apple.driver.AppleThunderboltNHI 4.0.4

  com.apple.iokit.IOThunderboltFamily 5.1.0

  com.apple.driver.AppleUSBMergeNub 900.4.1

  com.apple.iokit.IOEthernetAVBController 1.0.3b3

  com.apple.driver.mDNSOffloadUserClient 1.0.1b8

  4.5.8 com.apple.iokit.IOFireWireFamily

  com.apple.iokit.IO80211Family 1110.26

  com.apple.iokit.IONetworkingFamily 3.2

  com Apple.Driver.corecapture 1.0.4

  com.apple.iokit.IOAHCIFamily 2.8.1

  com.apple.driver.usb.AppleUSBUHCI 1.0.1

  com.apple.driver.usb.AppleUSBEHCI 1.0.1

  com.apple.iokit.IOUSBFamily 900.4.1

  com.apple.iokit.IOUSBHostFamily 1.0.1

  com.apple.driver.AppleUSBHostMergeProperties 1.0.1

  com.apple.driver.AppleEFINVRAM 2.0

  com.apple.driver.AppleEFIRuntime 2.0

  com.apple.iokit.IOHIDFamily 2.0.0

  com.apple.iokit.IOSMBusFamily 1.1

  com Apple.Security.sandbox 300.0

  com.apple.kext.AppleMatch 1.0.0d1

  com.apple.driver.AppleKeyStore 2

  com.apple.driver.AppleMobileFileIntegrity 1.0.5

  com.apple.driver.AppleCredentialManager 1.0

  com.apple.driver.DiskImages 417.2

  com.apple.iokit.IOStorageFamily 2.1

  com.apple.iokit.IOReportFamily 31

  com.apple.driver.AppleFDEKeyStore 28.30

  com.apple.driver.AppleACPIPlatform 4.0

  com.apple.iokit.IOPCIFamily 2.9

  com.apple.iokit.IOACPIFamily 1.4

  com.apple.kec.Libm 1

  com Apple.KEC.pthread 1

  com Apple.KEC.corecrypto 1.0

  Model: iMac12, 2, IM121.0047.B23 of BootROM, 4 processors, Intel Core i7, 3.4 GHz, 32 GB, MSC 1.72f2

  Graphics card: AMD Radeon HD 6970 M, AMD Radeon HD 6970 M, PCIe, 2048 MB

  Memory module: BANK 0/DIMM0, 8 GB, DDR3, 1333 MHz, 0x029E, 0x434D5341384758334D314131333333433920

  Memory module: BANK 1/DIMM0, 8 GB, DDR3, 1333 MHz, 0x029E, 0x434D5341384758334D314131333333433920

  Memory module: BANK 0/DIMM1, 8 GB, DDR3, 1333 MHz, 0x029E, 0x434D5341384758334D314131333333433920

  Memory module: BANK 1/DIMM1, 8 GB, DDR3, 1333 MHz, 0x029E, 0x434D5341384758334D314131333333433920

  Airport: spairport_wireless_card_type_airport_extreme (0x168C, 0x9A), Atheros 9380: 4.0.74.0 - P2P

  Bluetooth: Version 4.4.3f4 16616, 3 services, 19 aircraft, 1 incoming serial ports

  Service network: Ethernet, Ethernet, en0

  PCI card: scsi, SCSI, Thunderbolt@195,0,0 Bus controller

  Serial ATA Device: ST31000528AS, 1 TB

  Serial ATA Device: APPLE TS256C, 251 GB SSD

  Serial ATA Device: HL-DT-STDVDRW GA32N

  USB device: USB 2.0 Bus

  USB device: FaceTime HD camera (built-in)

  USB device: Hub

  USB device: USB receiver

  USB device: Hub BRCM2046

  USB Device: USB Bluetooth host controller

  USB device: USB 2.0 Bus

  USB device: Hub

  USB device: ShuttleXpress

  USB Device: IR receiver

  USB Device: Card reader

  Bus crush: iMac, Apple Inc., 25.1

  Device of love at first sight: Mini, Drobo, 3, 26.3

  It sounds like a RAM issue, but you should remove these to test:

  com TrustedData.driver.VendorSpecificType00 1.7.0

  com.drobo.SCSI.ThunderBolt 1.1 [77097]

  com Logitech.Unifying.HID Driver 1.3.1

  com Logitech.Control Center.HID Driver 3.9.1

  Despite the seller claiming that it will work, 4x8Go is not supported by Apple in this iMac.

• iMac hangs after update of recent software - "an element of the liberated area has been modified in the area of pipe.

  I have an iMac 21.5 "2009 end which I never had no problem with. It is Yosemite 10.10.5 running and after a recent software update has become very unstable. After I restarted recently he crashed 5 times a day. It seems to be the internet causing the problem (I use Google and Safari and had adbloc on Google).

  This is a copy of the last problem report. Any help would be appreciated.

  Anonymous UUID: 7DBCDA8C-8FD9-63FE-7843-971A36805010

  Mar 22 19:13:35 dec 2015

  Panic report *.

  panic (cpu 0 0xffffff800c76bf7d appellant): "an element of the liberated area has changed in the area of pipe: expected 0xc0ffeeb11389b206 but found 0xc0ffeef11389b206, wicks 0 4000000000 changed x, offset 168 of 176 in the element 0xffffff801a243a70, cookies 0x3f00113109ad8bc6 0x53521947e0c1049"@/SourceCache/xnu/xnu-2782.50.1/osfmk/kern/zalloc.c:496.

  Backtrace (CPU 0), frame: return address

  0xffffff809f79bc70: 0xffffff800c72ad21

  0xffffff809f79bcf0: 0xffffff800c76bf7d

  0xffffff809f79bd60: 0xffffff800c76b9f1

  0xffffff809f79bda0: 0xffffff800c76a837

  0xffffff809f79bed0: 0xffffff800cbefd61

  0xffffff809f79bf50: 0xffffff800cc4b376

  0xffffff809f79bfb0: 0xffffff800c8344a6

  The process corresponding to the current thread BSD name: firmwaresyncd

  Mac OS version:

  14F1509

  Kernel version:

  14.5.0 Darwin kernel version: kills Sep 1 21:23:09 PDT 2015; root:XNU-2782.50.1~1/RELEASE_X86_64

  Kernel UUID: 06D286E3-A8A1-3BE7-A7EB-EAC6E0C69758

  Slide kernel: 0x000000000c400000

  Text of core base: 0xffffff800c600000

  Text __HIB base: 0xffffff800c500000

  Name of system model: iMac10, 1 (Mac-F2268CC8)

  Availability of the system in nanoseconds: 350747261770

  last load kext to 295918008027: com.apple.filesystems.msdosfs 1.10 (addr 0xffffff7f8ef37000 size 69632)

  Finally unloaded kext to 148510260291: com.apple.iokit.IOAHCIPassThrough 1.0.3 (addr 0xffffff7f8e061000 size 36864)

  kexts responsible:

  com.rim.driver.BlackBerryUSBDriverInt 0.0.68

  com Apple.filesystems.msdosfs 1.10

  com.apple.driver.AudioAUUC 1.70

  com.apple.driver.AppleHWSensor 1.9.5d0

  com.apple.driver.AGPM 110.19.6

  com Apple.filesystems.autofs 3.0

  com.apple.iokit.IOBluetoothSerialManager 4.3.6f3

  com.apple.driver.AppleOSXWatchdog 1

  com.apple.driver.AppleMikeyHIDDriver 124

  com.apple.driver.AppleHDA 272.18.3

  com.apple.driver.AppleMikeyDriver 272.18.3

  com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.3.6f3

  com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0

  com.apple.driver.AppleLPC 1.7.3

  com.apple.iokit.IOUserEthernet 1.0.1

  com.apple.Dont_Steal_Mac_OS_X 7.0.0

  com.apple.driver.AppleHWAccess 1

  com.apple.driver.AppleHV 1

  com.apple.driver.AppleIntelSlowAdaptiveClocking 4.0.0

  com.apple.driver.AppleBacklight 170.7.4

  com.apple.GeForceTesla 10.0.0

  com.apple.driver.AppleUpstreamUserClient 3.6.1

  com.apple.driver.AppleMCCSControl 1.2.12

  com.apple.driver.AppleIRController 327,5

  com.apple.driver.AppleUSBCardReader 3.5.5

  com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1

  com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0

  com.apple.BootCache 36

  com.apple.iokit.SCSITaskUserClient 3.7.5

  com.apple.driver.XsanFilter 404

  com.apple.iokit.IOAHCIBlockStorage 2.7.1

  com.apple.driver.AppleFWOHCI 5.5.2

  com.apple.driver.AirPort.Atheros40 700.74.5

  com.apple.driver.AppleUSBHub 705.4.2

  com.apple.driver.AppleHPET 1.8

  com Apple.nvenet 2.0.22

  com.apple.driver.AppleAHCIPort 3.1.2

  com.apple.driver.AppleUSBOHCI 656.4.1

  com.apple.driver.AppleUSBEHCI 705.4.14

  com.apple.driver.AppleRTC 2.0

  com.apple.driver.AppleACPIButtons 3.1

  com.apple.driver.AppleSMBIOS 2.1

  com.apple.driver.AppleACPIEC 3.1

  com.apple.driver.AppleAPIC 1.7

  com.apple.driver.AppleIntelCPUPowerManagementClient 218.0.0

  com Apple.NKE.applicationfirewall 161

  com Apple.Security.Quarantine 3

  com.apple.security.TMSafetyNet 8

  com.apple.driver.AppleIntelCPUPowerManagement 218.0.0

  3.10.25 com.apple.AppleGraphicsDeviceControl

  com Apple.kext.Triggers 1.0

  com.apple.iokit.IOSerialFamily 11

  com.apple.driver.DspFuncLib 272.18.3

  com.apple.kext.OSvKernDSPLib 1.15

  com.apple.iokit.IOFireWireIP 2.2.6

  com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.3.6f3

  com.apple.driver.IOPlatformPluginLegacy 1.0.0

  com.apple.driver.AppleSMBusPCI 1.0.12d1

  com.apple.driver.IOPlatformPluginFamily 5.9.1d7

  com.apple.iokit.IOUSBUserClient 705.4.0

  com.apple.driver.AppleHDAController 272.18.3

  com.apple.iokit.IOHDAFamily 272.18.3

  com.apple.iokit.IOAudioFamily 203.3

  com.apple.vecLib.kext 1.2.0

  com.apple.iokit.IOSurface 97.4

  com.apple.iokit.IOBluetoothFamily 4.3.6f3

  com.apple.iokit.IOSlowAdaptiveClockingFamily 1.0.0

  com.apple.driver.AppleBacklightExpert 1.1.0

  com.apple.driver.AppleSMC 3.1.9

  com.apple.nvidia.classic.NVDANV50HalTesla 10.0.0

  com.apple.driver.AppleSMBusController 1.0.13d1

  com.apple.nvidia.classic.NVDAResmanTesla 10.0.0

  com.apple.iokit.IONDRVSupport 2.4.1

  com.apple.iokit.IOGraphicsFamily 2.4.1

  com.apple.driver.AppleUSBHIDKeyboard 176,2

  com.apple.driver.AppleHIDKeyboard 176,2

  com.apple.iokit.IOUSBHIDDriver 705.4.0

  com.apple.driver.AppleUSBMergeNub 705.4.0

  com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.7.5

  com.apple.iokit.IOBDStorageFamily 1.7

  com.apple.iokit.IODVDStorageFamily 1.7.1

  com.apple.iokit.IOCDStorageFamily 1.7.1

  com.apple.iokit.IOAHCISerialATAPI 2.6.1

  4.5.8 com.apple.iokit.IOFireWireFamily

  com.apple.driver.AppleEFINVRAM 2.0

  com.apple.iokit.IO80211Family 730.60

  com.apple.driver.AppleEFIRuntime 2.0

  com.apple.iokit.IONetworkingFamily 3.2

  com.apple.iokit.IOAHCIFamily 2.7.5

  2.2.9 com.apple.driver.NVSMU

  com.apple.iokit.IOHIDFamily 2.0.0

  com.apple.iokit.IOSMBusFamily 1.1

  com Apple.Security.sandbox 300.0

  com.apple.kext.AppleMatch 1.0.0d1

  com.apple.driver.AppleKeyStore 2

  com.apple.driver.AppleMobileFileIntegrity 1.0.5

  com.apple.driver.AppleCredentialManager 1.0

  com.apple.driver.DiskImages 398

  com.apple.iokit.IOReportFamily 31

  com.apple.driver.AppleFDEKeyStore 28.30

  com.apple.iokit.IOUSBMassStorageClass 3.7.2

  com.apple.driver.AppleUSBComposite 705.4.9

  com.apple.iokit.IOSCSIBlockCommandsDevice 3.7.5

  com.apple.iokit.IOStorageFamily 2.0

  com.apple.iokit.IOSCSIArchitectureModelFamily 3.7.5

  com.apple.iokit.IOUSBFamily 720.4.4

  com.apple.driver.AppleACPIPlatform 3.1

  com.apple.iokit.IOPCIFamily 2.9

  com.apple.iokit.IOACPIFamily 1.4

  com.apple.kec.Libm 1

  com Apple.KEC.pthread 1

  com Apple.KEC.corecrypto 1.0

  System profile:

  Airport: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 4.0.74.0 - P2P

  Bluetooth: Version 4.3.6f3 16238, 3 services, 27 aircraft, 1 incoming serial ports

  Crush Bus:

  Memory module: BANK 0/DIMM1, 2 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334648302D4346382020

  Memory module: BANK 1/DIMM1, 2 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334648302D4346382020

  USB device: Keyboard Hub

  USB Device: Apple keyboard

  USB device: ISight built-in

  USB device: Memory card reader internal

  USB Device: IR receiver

  USB device: USB optical mouse

  USB device: Hub BRCM2046

  USB Device: USB Bluetooth host controller

  Serial ATA Device: WDC WD5000AAKS-40V2B0, 500,11 GB

  Serial ATA Device: OPTIARC DVD RW AD - 5680H

  Model: iMac10, 1, IM101.00CC.B00 of BootROM, 2 processors, Intel Core 2 Duo 3.06 GHz, 4 GB, MSC 1.52f9

  Network service: Airport, AirPort, en1

  Graphics card: NVIDIA GeForce 9400, NVIDIA GeForce 9400, PCI, 256 MB

  Model: iMac10, 1, IM101.00CC.B00 of BootROM, 2 processors, Intel Core 2 Duo 3.06 GHz, 4 GB, MSC 1.52f9

  Graphics card: NVIDIA GeForce 9400, NVIDIA GeForce 9400, PCI, 256 MB

  Memory module: BANK 0/DIMM1, 2 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334648302D4346382020

  Memory module: BANK 1/DIMM1, 2 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334648302D4346382020

  Airport: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 4.0.74.0 - P2P

  Bluetooth: Version 4.3.6f3 16238, 3 services, 27 aircraft, 1 incoming serial ports

  Network service: Airport, AirPort, en1

  Serial ATA Device: WDC WD5000AAKS-40V2B0, 500,11 GB

  Serial ATA Device: OPTIARC DVD RW AD - 5680H

  USB device: Keyboard Hub

  USB Device: Apple keyboard

  USB device: ISight built-in

  USB device: Memory card reader internal

  USB Device: IR receiver

  USB device: USB optical mouse

  USB device: Hub BRCM2046

  USB Device: USB Bluetooth host controller

  Crush Bus:

  com.rim.driver.BlackBerryUSBDriverInt 0.0.68

  Try to uninstall RIM.

  Uninstallation of RIM

• WinRE disabled after resizing partition recovery of Lenovo and OneKey Re works

  System: Lenovo Yoga 700-14ISK 80QD

  The almost 4 GB of free space on the partition of Lenovo have been very tempting, after researching if it is safe and also, I decided to give it a go by using a 3rd party free software has saved me several times in the past (MiniTool Partition Wizard). Interesting that most tutorials on create a recovery drive and the removal of the partition, but I decided for now to get just the free space until it takes more, and I did not find that resizing with 3rd party software will mess up your WinRe settings only once this has been done. Here's the info of the agent:

  /Info C:\Windows\System32>REAgentC
  
  Recovery environment Windows (WINRE) and system reset
  
  Information:
  
  Status of Windows RE:         disabled
  
      WINRE location:
  
      Identifier of the Configuration Data (BCD) of startup: 47251840-c09c-11e5-af06-00808a8e1ce5
  
      Location of recovery image:
  
      Image Recovery index:      0
  
      Location of the custom image:
  
      The index of the custom image:        0
  REAGENTC. EXE: Successful Operation.

  After resizing and the recovery agent control, I realized that I lost details such as the location of the partition, offset and id. After changing the System32/recovery with outreach and id ReAgent.Xml it was not enough to allow that the path for the location of winre etc miss me him.

  This is what my file looks like now:

  Can someone help me and give me the necessary adjustments?

  My laptop works fine and OneKey recovery works well, except that I cannot create a recovery drive more. Thank you.

  After watching my partitions and shifts again, I modified the agent accordingly re and now I am able to create a recovery drive.

  Solution:

  1. Mode of high open CMD
  2. type diskpart
  3. partition of type list
  4. use select partition = x where x is the number of the partition that you are interested to see the details
  5. partition detail to see GUID, offset and other type information
  6. Type exit
  7. Change Windows/System32/Recovery/ReAgent.xml
     • Change path, offset, and guid for tag WinreLocation
     • That's why your score are hidden to make sure that the path looks like this:
       • \\?\GLOBALROOT\device\harddiskY\partitionX\Recovery\WindowsRE
       • Where is the number of hard disk - usually so unique 0
       • Where X is the partition for WinRE number determined in step 4
     • Apply the same logic to PBRImageLocation tag to partition LENOVO_PART
  8. In CMD type reagentc /info and now you should be able to see your location
  9. If step 8 failed try reagentc first enable and repeat step 8
  10. I don't know if it is relevant or not, but a computer restart might help and repeat steps 8, 9

• Readed hexadecimal string converted to a decimal number.

  Hello! I do a vi to check the hours of the lamp of my Sony projector. I send a hexadecimal command which is: A901 dignitaries 1301 0000 139 a senators. When the projector receives answer with 1901 1302 0031 339. 0031 corresponds to the data that I need to convert it to decimal because it tells me how many hours we used the lamp. How can I get this read-separated string to get only the third part of hexadecimal numbers converted to decimal? Thanks in advance!

  Hey rounded!

  As the data is in a format string, the hexadecimal number VI string should work well in this case.

  To enter only a single figure of this string to use in the hexadecimal number string VI, then I suggest using the string subset VI; Returns a specified segment of a string. By changing the offset of entry which determines which part of the string data is beginning to be analyzed from and changing the length to control the amount of characters to analyze, you will be able to enter the character that you want to convert.

  Kind regards

• Is - this command D2CurveSpecOffs working for a graphic bar in DIAdem 11.0?

  Hello

  I have a difficulty to get the command D2CurveSpecOffs works for my custom vertical bar graph (histogram).  I'm opening and closing of the objectnames very well, since I can adjust other aspects of the graph.  As I understand it, D2CurveSpecOffs allows me to compensate for the vertical bar on the left to the right relative to the value it represents on the x-axis?  Right now, it seems that the bar is centered on the value of x.  But because each bar in my bar chart represents a different range, i.e. of the counts of 0.25 to 0.5 = 1000, I would that the right edge of the bar to align with 0.5 (0.5 aligns with 1000 as the x-axis channels & y axis), to my knowledge, maybe I should put the D2CurveSpecOffs = 100 or - 100, etc..

  Example of 2 channels:

  (Ch1) Counts, values (Ch2)

  0.25, 1200

  0.5, 1000

  1, 125

  2: 13

  etc.

  Maybe I'm not completely understand what D2CurveSpecOffs allows me to do.  I'd appreciate your comments.

  -GvG

  GvG,

  D2CurveSpecOffs does not allow to specify the offset of percentage on the x-axis for bar charts. You can see the photos, I enclose below before and after. I would recommend that you change the offset manually in the report and then with the parameters of the curves window, press Ctrl + A, this will copy your settings, and you can then go into your script file and press Ctrl + V to paste the settings changed by your name of graph and the curve already filled. It seems that the value that you specify with Offset is used in conjunction with the bar width to calculate its final position, so, even if you leave the shift even change the width, your bars will move.

• Text align out gray race

  On my text, I need to align the line on the outside, but it is grayed out. How to not be gray?

  

  Clarify the advice above

  ~~~~~~~~~~~~~~~~~~

  As you're already understand, Rite and oak, you can not re - align the line on the live (editable text). If you are ready to engage in the type that is in its final form, you can select and choose Type > vectorize and you can align the stroke to the outside using the button you showed up in the first screenshot. Once the type is converted to be vectorised text, you will not be able to edit the text well.

  1. To keep the type direct (and editable), select the text and choose window > appearance:
     
  2. Click on the button fx on the bottom row and the path > offset. In the example below, I put the offset to 1 pt to move outside the text.
     
  3. If you want to change the offset, click again on the road to orange underlined lag in the appearance Panel, and not on the fx button.