Charger of property impossible to import properties
Hello
I use the step property Loader to define the boundaries of a numerical limit Test step.
It works fine when the default limits are a numeric value, such as 9 and 11.
But I want to make sure that the digital limit test step fails when the limits have not set through the property Loader, so I changed the default limits to IND.
However, this causes the charger property to raise an error:
-18; User-defined error code. Property loader step failed to import or export properties. 3 property value(s) were found. 1 property value(s) were imported from 6 row(s) of data
Is this a bug in the loader of the property, or I do something wrong?
See file attached a test (performed with Teststand 4.2) case.
The PropertyLoader does not mix the two guy to say LowExpr and low (similar and high HighExpr) such that one is a string and the other is a number.
If you insert the IND in High Low limit step and jump the property loader step sequence file runs as expected.
It seems that the PropertyLoader is the treatment IND and INF and NAN and expressions rather than constant.
Tags: NI Software
Similar Questions
-
Hello brain trust,
I have an Oracle 11.1.0.7 primary and have configured an 11.1.0.7 Eve. The config is our recipe for 10g. The broker is in place on both sides.
I'm going to add DGMGRL primary, no problem. But when I add the day before, I get ORA-16796 (impossible to import the properties). Digging into tracking logs, he mentions an ORA-01017 (username/password invalid). But I have no problem connecting as "conn sys/password@db_standby as sysdba".
I got this ORA-16796 times before in the distant past, and the problem is that someone has changed the SYS password on the primary without updating the eve orapwd file. In this case, it is NOT the problem. I put in a fresh orapwd on both sides (bounced the DBs later), and I explicitly put the SYS password on primary before cloning the expectations. And once again, no problem doing a "CONN sys/***@db_standby as sysdba" primary. I can talk to the wait, look at its tables of $ V, etc. tnsping, etc all work fine. listening port on both sides shows services. DG broker is in place on both sides.
Tried the shuffle "stop broker, remove all the config, start db broker, try again ' a few times with no luck.
I'm really scratching my head on what it could be. Open an SR with Oracle, but I was wondering if anyone here has any other advice?
Something has radically changed 10 g-> 11 g about DG? I admit that this is our first instance 11g and I'm based its config on what we are doing for 10g.
Something was changing in the security about the SYSDBA distance model? Again, I have no problem connecting as SYSDBA in the primary for the ORA-01017 really confused me.The config is the result of our recipe of 10g - you copied the file password from the primary to the standby when you create the day before? 11g a password different internals file and simply create one for the day before with the same password no longer works.
Larry
-
Impossible to import picture in the message of the Web page
Impossible to import a picture to the message Web page
Which Web page? What are you trying to do, download on a web page or download from a web page? How do you try to do this?
-
Impossible to import the raw files from canon g16 in lightroom 4
I have a new Canon g16 and can't import raw files into my lightroom 4. I downloaded the recommended dng converter (canon g16 was one of the devices listed on the support list) and I always get the error message on lightroom being impossible to import and raw riles the g16. When I checked for software updates, it says there is none - that my lightroom software 4 was "aware". Does this mean I have to buy lightroom 5 or 6?
Hi kerryem,
Canon 16 G has been initially supported by Lightroom 5.2.See devices supported by Adobe Camera Raw
Please switch to Lightroom latest version 6 to be able to process raw images from new cameras.
Alternatively, you can use the DNG Converter to convwert G16 raw to DNG files and then import them into Lightroom 4. see help Photoshop | Digital negative converter Adobe 9.x
Kind regards
Assani
-
Hi, I just downloaded trial of adobe lightroom. However, when I try to import my images it does allow me to. It shows the preview where I choose my pictures to import, but once I click on import, it is said that it is impossible to import my files, which are in jpg format.
Hi chelseac46438928,
Please make sure that you have permissions to the folder where you try to import images.
Or you can try to change the location of import of images in Lightroom.
Kind regards
Tanuj
-
Impossible to import RAW Nikon D810 to LR5, IMac user
Just started using a D810 and impossible to import RAW files into LR5. I am a user of the IMac. What I am doing wrong. No update is required, so Adobe said. Can anyone help? Thank you.
With the help of Nikon Transfer is not necessary, but if you are going to use, make sure that you use the latest version of the software. It is a well-known problem that using old versions of Nikon Transfer on new NAVE of new camera models format files will corrupt the NEF files in transit.
-
Just bought the new Canon 5 d. Impossible to import RAW files into LR5.
Just bought the new Canon 5 d. Impossible to import RAW files into LR5. Any suggestions?
Support for the camera was only added in Lightroom 6, you can upgrade to level or you cam d/load the latest DNG Converter and convert them to DNG format that will be readable in Lightroom 5...
-
Hi all
I'm trying to migrate groups of EPM 11.1.1.3 to EMP 11.1.2.2
and during the import of 'Groups.csv' I get the following error:-
Error in migration artifact, "/ native/groups directory.
EPMIE-00065: Impossible to import children in the group. The group name is null or empty. Provide the name of a valid group in the csv file.
Before you import the Group.csv file I did due to changes in the file 'Sourceinfo.xml ':
1 product version (9.5.0 to 11.1.2.2) & LCM Version (11.1.1.3.22 to 11.1.2)
I missed something?
Thank you
You probably have lines with empty group names. For the children of group you will see something like this:
#group_children
group_id, group_provider, user_id, ID, user_provider
MY group, User1, native Directory name
MY group, user2, native Directory name
If you have a line with just commas "," so maybe it's why you get the error message
Pablo
-
Inherited and imported properties
Hello
Can someone please explain to me what are the properties inherited and imported into the OCD?
How they are created?
The properties coming from BOM during import and discount program are called properties Inheried and imported. You cannot change them in the Configurator as you can't change the BOM item details in the OCD.
Item catalog items will be imported/inherited the Configurator as properties. Even elements of Advance (APC/PIM) product catalog will also be imported in the Configurator as properties. Catalogue item value is assigned to the item matching as a property value.
I hope this helps!
-
Impossible to import the bookmarks file (file is JSON or HTML)
Recently, I reformatted my laptop with a friend (works in), and from what I remember, he saved bookmarks via the function "import and backup / Backup".
When I went to import back into Firefox, and I sailed to the location of the file, it was apparently not recognized because it does not appear in the folder, in that I know that it is. While in this process, I noticed also that Firefox is either looking for a JSON or HTML file. When I looked more closely the backup file, I noticed that it doesn't have a file extension. When I looked at the properties of the file, it simply says "file". I went online looking for an online tool to identify the file and found TrID (http://mark0.net/onlinetrid.aspx/). When I ran across this identification software all that I got was:"The file appears to be crude/ASCII text. TrID is best suited for analysing binary files! »
As I don't see any option in Firefox to load this file type, I wondered what could have been hurt during the backup process.
I was able to open the file in Excel (just a hunch because it "seemed" be a text file based on the identification of online files). The file opened, useless of course, but at least it seems that the file is not corrupted in any case.Please could someone help me with this? I have all my links job search in this backup, and it would be a ton of effort to recreate all this!
My Info:
Windows XP Home Edition, SP3
Firefox 14.0.1Hi cor - el,.
Thank you! That solved! I remember years ago with a similar situation, but not Firefox and I thought to try this thing... but I guess I'm getting old... Laughing out loud
Once again, thanks a lot!
-
Recently impossible to import Photos from the digital camera or iPhone device
In the past, whenever I have one of my digital cameras or an iPhone connected to my PC (Dell Inspiron 530 running on Windows Vista), the import box would jump to the top, I'd choose to import photos and everything worked without problem. Not sure if this has anything to do with it, but recently I uninstalled Norton Internet Security 2007 and installed Norton 360 and since then I'm unable to download pictures from my digital camera (Canon Powershot SD950 IS) or my iPhone. The box "import photos" don't jump (it always did before), and when I go to the Picasa or Windows Photo Gallery and try to "import from camera", it tells me there is no connected device (this happens when the iPhone or the Canon camera is plugged). And instead of the pealing sound, my PC would usually do when a device is correctly spiked, he made three low knock-type noises, as if to say the device was not properly read. Interestingly, the iPhone still synchronizes / charges, etc., but I can't get on the photos. I spent some time chatting with Norton Customer Support, because this issue has started only after that I installed Norton 360, but we have uninstalled Norton 360 (re - installed since) and the problem continued. I tried several ports, and because this problem has affected at the same time my iphone and a digital camera, that work with any other son and USB ports, I'm pretty sure that this is not something simple like a bad port or wire. I don't know if it's a matter of updating Windows Vista or what. So now I'm scratching my head...
Hi BklnMick,
Thanks for posting your question on the Forums of Windows Vista.
I need more information to help you better.
1. do you think any drive new withdrawal created on the desktop once you connect your digital camera or Iphone?
2 have you tried to reinstall/update drivers for the digital camera or Iphone?
3. you see a new message of material found during the connection digital camera or Iphone?
4. are there any other devices (such as mouse, keyboard, printer etc.) connected to the machine?
If you are sure that the problem started after installing an application, you can try to perform a system restore on the computer to a previous date when you when it is able to import photos from your digital camera or your Iphone. You can follow the article give:
http://support.Microsoft.com/default.aspx/KB/936212
You can also try to power on the machine cycle to drain static electricity that may have built up on the USB ports.
1. turn of the computer.
2. disconnect all devices from the CPU.
3. hold the power button for every 30secs.
4. connect all devices to the machine.
5 restart the computer and check if the USB begin to operate.
Hope the above information helps. Please post back and we do know.
Thank you & best regards
Ashish Gupta
Microsoft Answers Support Engineer -
ADF Mobile: impossible to import classes
Hello
I use JDeveloper 11.1.2.4.0
I am currently unable to import the classes created in happy (controller) application in a class from the happy view (controller).
Why is this happening?
Thank you
Daniel
Hi, Daniel.
This is because ApplicationController is not in the classpath for ViewController.
To change this, open the properties of the project for ViewController...
.. then create a dependence on the build output ApplicationController, as shown below.
Best regards
Frédéric Desbiens
Senior Product Manager
Mobility and development tools
Twitter: @BlueberryCoder
-
Impossible to import alarms of an object deserialized xml (output of Export-Clixml)
Hello
I tried and modified the script according to my requirement given by Angel in
In fact, in the script of the Angel for each alarm there is a .xml file created in the folder. But, I tried the script as
the addition of all the alarms to a file as xml below information:function ExportAlarm() {}
SE connect-VIServer $serverToExportFrom - user "xxxx" - password "xxxx".
$alarmToExport = get-AlarmDefinition-entity (Get-file - NoRecursion) - name
$xml = @)
foreach ($alarm to $alarmToExport)
{
$a = get-view-Id $alarm. ID
$xml += $a.Info
}
$xml | Export-Clixml-path $fileName - depth ([System.Int32]: MaxValue)
}I am able to collect all the information message in a single xml file. But while import the xml with the ability to import as below:
function ImportAlarm {}
SE connect-VIServer $serverToImportTo - user "xxxx" - password "xxxx".
$deserializedAlarmInfo = import-Clixml-path $fileName
$importedAlarmInfo = ConvertFromDeserialized ($deserializedAlarmInfo)
$entity = get-file - NoRecursion
$alarmManager = get-view-Id "AlarmManager.
$alarmManager.CreateAlarm($entity.) ID, $importedAlarmInfo)
}I do not change the ConvertFromDeserialized function. During the import, I get an error saying
Exception calling "SetValue" with '3' or the arguments: "Object"System.Object []"type cannot be converted to type 'System.String'."
C:\Nag\requests\req4add-delete-modify-Alarms\newreq\newreqimporttest.ps1:59 tank: 6
+ $resultProperty.SetValue ($result, $propertyValue, $null)
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo: NotSpecified: (:)) [], MethodInvocationException)
+ FullyQualifiedErrorId: ArgumentException
"Exception by calling 'CreateAlarm' with '2' or the arguments:"
Name of the Required property is missing from the data of type object AlarmInfo
during the DataObject analysis serialized type vim.alarm.AlarmInfo
on line 1, column 335
during the analysis of the CreateAlarm method call information
on line 1, column 218
during the analysis of body SOAP
on line 1, column 207
When parsing of SOAP envelope
on line 1, column 38
When parsing the HTTP request method to create
object of type vim.alarm.AlarmManager
on line 1, column 0 "
C:\Nag\requests\req4add-delete-modify-Alarms\newreq\newreqimporttest.ps1:10 char: 2
+ $alarmManager.CreateAlarm($entity.) ID, $importedAlarmInfo)
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo: NotSpecified: (:)) [], MethodInvocationException)
+ FullyQualifiedErrorId: VimExceptionPlease find the complete error in the attachment.
Could you please guide me on how to export/import all the alarms to a single xml file and not a folder having the XML for each alarm. If there is no limitation, please let me know. Thanks a lot for your help.
LucD thank you for your valuable contributions. As the $deserializedAlarmInfo have a table, I tried the below script and it works fine.
function ImportAlarms
{
$deserializedAlarmInfo = import-Clixml-path $Importpath
$deserializedAlarmInfo | {ForEach-Object
$importedAlarmInfo = ConvertFromDeserialized ($_)
$entity = get-file - NoRecursion
$alarmManager = get-view-Id "AlarmManager.
$alarmManager.CreateAlarm($entity.) ID, $importedAlarmInfo)}
} -
Property missing in node properties tab
Hello
I've created a property Boolean node Local 'DoNotModify' with the default 'FALSE' and attributed to a category of properties 'Accounts', but when I opened the hierarchy and check the properties of the node in the category 'accounts' property is not displayed. So I wrote a query of property on the same property and this returns all nodes in the hierarchy. So this means that the property has been created successfully, but why am I not able to see in the properties of the node tab? Help, please. I work in the version 11.1.2.1.
Thank you
Krishna
Published by: 903463 on June 24, 2012 23:45Krishna,
You must assign the new property to an appropriate hierarchy of other node type, you will not be able to view the properties.
If you want to validate, click on "display all properties." It will be available in the hotfixes later 11.1.2.1. Not sure which patch you're 11.1.2.1 -
Impossible to import SWF more! ?? Workaround solutions?
Oh dear. As the host, being able to import SWF files from always useful.
According to me, it seems impossible to do more.
What is the solution more simple, you guys found?
I guess I can convert a stream of image and import. Also I can copy a chronology of one FLA to another. Both are of extra work.
I thought that the upgrade was supposed to add features?
The simplest solution is to use the version that provides the features you want. CC has many useful features removed.
Maybe you are looking for
-
Why can't I get RoboForm appears on FireFox Version 7?
I am running Windows 7 Professional on my laptop. I've always had RoboForm works on my other previous versions of FireFox. I can't even RoboFom icon. I went to view then toolbars and still it has not shown in section toolbar. I even uninstalled FireF
-
my main administrator password is not letting me access my laptop?
can someone help me as soon as possible! my main administrator is not be accessed through the password that I used and I need to access my files.
-
mt pro3400: PCI simple communication controller
I am a Pro 3400 mt simple PCI communications controller for xp driver please help me
-
Hello Sir / Madam,. Have we not to have a separate server of our own to do a push request. Please help me about what I am a newbie to the blackberry development. Kind regards Sandesh.
-
I have a few questions about it. #1. What are the API to record audio? #2. How do I record audio (for example in what format?) and how do I specify the media to record the audio in? #3. Is it possible to record audio while the application is not i