Chart crashes on the Satellite M40 154

Similar Questions

• ATI graphics card crashes on the Satellite M40-129

  Hi all

  I had a problem with my ATI X 600 mobitity graphics card. Sometimes, when I start my laptop it crashes, saying that the graphics card is in an infinite loop and in the games graphics is not displayed correctly, and after a minute, it crashes too. When I restart the problem is solved, but he does not appear each time. Can someone help me with this?

  Hello

  What driver is installed on your device? Toshiba or designed ATI driver?

• Satellite M40-154 (PSM40E) - which HARD drive new can I use?

  Hello community,

  need a new HARD drive for my * Satellite M40 154 GR PSM 40th *. The old a HDD is: Toshiba MK8025GAS. The new need Toshiba also, 5400 RPM and 80-100GB capacity.
  I already try to find out which is right for my laptop, but I do not understand much about the HARD drives. There are more types, like GSX... But I need one that is compatible with my M40. Pleas help.

  Kind regards.

  AFAIK you can use each HARD top of page 120 GB disk because your laptop is a limitation of LBA 28 bits. This means that you can use the top of 128 GB of DISK space.

  The new HARD drive should be have an IDE interface and size 2.5. All that s and normally each Toshiba HDD should work with these specifications.

• Who installed Vista Ultimate SB to the Satellite M40

  Is there anyone who have Vista Ultimate installed Satellite M40? I have big problems to install Vista. After that I have disabled the PCMCIA is OK. I'm looking for a new update of the BIOS and the Vista drivers.

  Hello

  I m a M40 owner but I did not install Vista on this unit. I use the XP.
  I have not installed Vista on this unit because according the Toshiba document I found in this forum the Toshiba drivers are not available and I n t think that this driver will be available in the next time, or any time for this series of laptop.

  Is the laptop has Vista capable sticker? I don t think so :(

• Modeling 3D (Sketch Up) programs keep crashing on the Satellite C660 - 28 d

  Hi guys,.

  Obtained the Satellite C660 - 28 d to Christmas as my old laptop was dying on its feet. So far I've had no problems with it, except for when you use a selection of programs, namely Sketch Up and the rhinoceros are two 3D modeling programs. Strangely enough, AutoCAD Revit works great, I have imagined would have been more demanding on the system.

  When Rhino opening he allows me to choose my model before crashing and displaying a message saying "Rhino 4.0 has encountered a problem and needs to close" and with Sketch Up I get again select a model but then a message saying "Google SketchUp has produced a bug splat and needs to close" followed by a similar error report form that never works when I try and send the error. This is happening on SketchUp 8, after having uninstalled and reinstalled SketchUp 8 and then uninstall and install SketchUp 7, all with the same result.

  It has been suggested to me that there is an error with the graphics card and I have to download a driver, but the only driver on the Toshiba site that would make sense to me is the display driver, I have installed and makes no difference.

  Please help me, I need the use of these types of programs for the University.

  Hello

  It is possible to have these problems because of display driver.
  You should maybe contact the software manufacturer and ask for help. Toshiba doesn't third party software support. Software maker has better experience with own product. I presume that what they have tested on different platforms and need to know what can be the problem.

• Backlight is disabled until the power management software is loaded on the Satellite M40 - 295

  Greetings to all members of the forum.

  I am owner of ten months a Satellite M40-295. My problem is the following:

  When I start my computer the backlight is disabled until I go into Windows and the power management program is loaded.
  After that the backlight of the screen lights up. I tried to change the brightness with Fn-F6/7 and screens using Fn + F5 without success.

  Init information (init messages, such as the Toshiba and Windows logo) appears on the screen (I checked it under the intense light and the screen from another angle of view), so the adapter seems to work properly.

  Thanks in advance

  Hi Evangelos

  I'm afraid that now, you have a problem. If the unit won't start the BIOS chip is probably damaged. In my opinion BIOS update was bad idea.

  Right now I don't want write something on the screen because now it is not important at all. Please contact the customer Service of your country partner and let check the device. Sorry, but I'm 99.9% that the unit is now completely screwed.

  If the appliance shows any sign of life is the case for the service. :(

• Corruption of the BIOS to the Satellite M40

  Hi all.

  I have an old laptop Toshiba Satellite M40 with damaged BIOS which of course does not start. TI powers drop down 3 sec after power, which means that it does not pass the test STATION. I understand various forum that it is not the competence of technicians ASP and I'm not ready to hear things like 'replace maother Board' of these guys.

  I heard talk about techniques that can reflash the BIOS in the CMOS memory using a floppy drive loaded with a version of BIOS.

  The computer is in pretty good condition, including a new 80 Gb HD and was working fine until I tried to update the BIOS. I think it should be fix and spend a few hours on it.

  Any ideas on the issue were greatly appreciated.

  Hello

  I'm afraid that you are ready to hear just a positive thing or what. Are you here to have the real discussion or you want to hear a fairy tale. You wrote in your ad that the BIOS is damaged. I guess that you know very well what should be done with pieces of damaged equipment.

  How you want to reflash the BIOS if your laptop is running in only 3 seconds. Please be serious.

• Peripheral USB do not work correctly on the Satellite M40 313

  I have a Satellite M40 313 I bought there are about 1 1/2 years and have had some problems with.

  However, I recently bought a Canon S3 IS and a Buffalo portable HD here in Japan, where I currently work.
  These two devices do not work with my computer.

  Attach the HD produced the message that this device will work better with a USB 2.0 high speed Port, before XP decides that the HD is actually a keyboard HID device! The camera mount, for which I had installed the software provided, will produce a message that suggests that I have install usbscan.sys file and forces me to use a driver of generic digital camera that does not work with the Canon camera.
  I fetch the requested file, but it made no difference...

  It seems that it is a problem of USB, and I also noticed that some of my friends devices USB do not work well with my computer.

  In this case, what is the best way to update my software so its compatible USB? Have I been dismantled down to the USB 1.1 version by WIndows at any given time? The pilot on the hub root 5.1.2600.2180 and is dated 07/01/2001.

  Any suggestion is appreciated.

  Hello

  Perhaps a biosupdate could help you? I mean it s do not know if is it a hardware problem or software, so that you can first try to check if it s a software linked history by:
  1.), updated the Bios
  2.) recover the system with the recovery cd (backup your data first!  ;))
  3.) install the latest drivers (do not install MS updates or patches, sometimes they cause errors)

  If you have no success after completing these steps, and then give a few comments.

  Welcome them

• What is max capacity of the HDD on the Satellite M40-101

  What is the maximum capacity of the disc HARD can be installed in the laptop M40-101?

  To my knowledge, some of the Mobile Satellite M40 were shipped with the hard disks of 80 GB (IDE).
  I didn't find any official Toshiba information about supported tough max, but I guess you should be able to use the 100 GB drive HARD; Maybe a 120 GB HARD drive too.

  Seems that you have to test.

  Best regards

• A few questions on the upgrade of the Satellite M30x 154

  Hi all

  I plan on upgrading my Satellite M30x-154.
  I was wondering if you guys would like to know before upgrading if the things I want to buy this would work.

  I would change my Hitachi 60 GB for a Seagate 100 g (link following) would this work?
  http://www.ebuyer.com/product/131274

  I have BIOS version 1.90.

  I intend to install Vista on it. I'll be able to use an OEM copy?

  I currently have 1 GB custom memory Idleness I plan on implementing to 2 GB inside
  It still works fine?

  See you soon
  Robert Knight

  Hello

  1 upgrade HDD. I think it will work because some models of satellite M30X was also built with 100 GB directly from Toshiba.

  2 OEM Vista will not work because the OEM of Vista version needs a special BIOS for activation (BIOS for VISTA). You can install it but needs activation after a few days.

  3. the satellite M30X is 2 GB max memory, which means that it is possible to install strips of memory 2 x 1 GB... but I can't say if Crosiar memory will work but normally they work. The original partnumbers memory for a 1 GB module is 1024Mo PC2100/PC2700 (PA3313U-1M1G)

  I hope this will help you.

  CU

• Hard drive on the Satellite L300-154 crash

  On 28 March, the hard drive in my Toshiba L300 154 failed and wouldn't boot from the partition recovery or recovery disks.

  I have installated a new HDD to be identical to the previous (just without the image) and decided to try my Windows 7 disc. I understand perfectly the requirements of Windows 7 and Vista hardware on the laptop, however, after Select preference startup screen would go black and display a PX18 M0F error message (I can't really remember the code exactly) on the device cable/media not been plugged in properly.

  Check the connector on the hard drive internally so that all the other components for dry joints or fractures and all very well.

  In any case, after you take out the hard drive and install on my bench development, I loaded Windows 7 above and placed in the laptop...

  Now it loads up and gets to the point where you enter your password, but before you even see that VERY quickly the screen flashes a blue error screen.

  Am I missing important drivers/fixes? or is there a way I can be sent 32 bit Vista OS to restore my laptop? I don't really want to buy Vista as it is a very poor operating system and I can't imagine anywhere to buy now days because there is no support for it.

  EDIT:
  Details of the problem are stated:

  Problem event name: StartupRepairOffline
  Problem Signature 01:6.1.7600.16385
  Problem Signature 02:6.1.7600.16385
  Problem Signature 03:unknown
  Signature of the 04:0 problem
  Problem Signature 05:AutoFailover
  Signature of problem 06:1
  Problem Signature 07:BadDriver
  OS Version:6.1.7600.2.0.0.256.1
  Locale ID:1033

  Post edited by: bkuch

  Hello

  You must install OS when the HARD drive is placed in the Notepad.
  Please put the laptop HARD disk, restart your laptop. Enter the BIOS settings, set it to default settings and check if the HARD drive is recognized in the BIOS.

  If the HARD drive is recognized correctly, restart the computer and press F12 to get into the boot menu.
  HARD drive is it too?

  Put in ODD Win7 installation disc, choose CD/DVD as a boot device and press ENTER.
  Hopefully, the Win7 installation starts correctly.

• Game Falcon 4.0 allied force crashes on the Satellite P100-324

  Hi all

  I have a toshiba Satellite P100 324 with a nvidia geforce 7900GS 512 MB vram.
  I have a problem with falcon 4.0 allied force. Everything is going well except when I update to patch 1.06 and upward.

  The game freezes for a second every 10 seconds. I sent the allied force. I've tried everything.
  Anti-one off, reinstall the drivers, reinstall direct 9.0 c... They tell me to turn off Full screen Anti-Aliasing.
  Are not full-screen Anti-Aliasing in my menu of the graphics card as anti-aliasing.

  Is there a difference between Full screen anti-aliasing and anti-aliasing?
  So, I disabled everything in the view menu. I tried to update the drivers, but there is no update for this toshiba.

  Does anyone know if there are new drivers for this model?

  Thank you all
  P.

  Hello

  F4AF is an old game, I don't think that you have the latest video drivers. Anti-aliasing anti-aliasing full screen is the same, don't worry about this.
  Of my friends installed this game too and had similar problems. Try to reinstall the game, the patch to the latest official version. Then, there are a few informal corrections called superpak, which solves many problems. Recent publication is by superpak4.

  Check this. Hope this helps you.

  HomerJ

• ATI graphic driver constantly crashing on the satellite

  Hi all, if this question is asked before, please accept my apologies and me directly to the answer.

  I have a Toshiba Equium running Windows XP (sp 2) but there seems to be some kind of conflict with the graphics driver (ATI Mobility Radeon 7000 IGP) which forces the system to crash several times a day - sometimes at startup, sometimes it crashes just during the operation. The error message says that ATI Graphics driver got into an infinite loop.

  I have the latest version of windows and the ATI updates but it seems to make no difference.

  A trawl of the internet forums suggest that many people have had this problem, but nobody seems to have a good solution.

  Hi Steve

  The BSOD appears and it is said that the ati32dvag.dll of the driver is stuck in an infinite loop. Am I wrong?
  I found also several threads on the infinite loop problem ATI graphics driver.
  Especially, he arrived at the course to play games or run solid 3d applications

  Lucky is right. You must install the graphics drivers from the Toshiba page.
  If this does not help, you can try to use the drivers from the site omegadrivers.net

• CorelDRAW X 3 crashes on the Satellite A300-1BZ

  I'm moving to a desktop environment for my new Satellite A300.

  The only problem I encountered is with Graphics Suite Corel X 3. It works fine on the desktop in XP and also on my laptop Toshiba no woman under Vista Home Premium. On the A300, it hangs in unpredictable ways. Sometimes it does not load, other times it loads and gets an error Vista immediately.

  The error message is not specific and the program closes. I have Vista and X 3 fully updated to the latest versions of the service. So I guess the problem is likely to be the installation of Vista on the A300 programme.

  Can anyone suggest where to look to fix this?

  Hello Peter

  In my opinion, you should check the FAQ section of the software manufacturer. Maybe you will find some useful information about the configuration under Vista.
  Have you tried to remove it and do fresh install?
  Check what applications are enabled to auto-start? Try turning off all that you don't need.

  It is not easy to say what the problem is here. All we have own OS configuration with different applications that run in the background.
  In my opinion, providing the answer to that is nothing but the mission impossible. ;)

• I can't retrieve the Satellite M40 (M45 in the United States)

  I put Ubuntu Linux on the laptop using the bootloader Grub 1.5.

  Then... I did something stupid. I used Partition Magic to increase the space for Windows. I don't mind losing any data, or nuking the drive and put back in operation, but it does not seem possible?

  When I put a boot disk (if recovery, Windows or Ubuntu) I get "Grub Error 17 1.5". I changed the boot options to boot from the CD first, but for some reason that always happens, and bios is kind of limit on what I can do. Now on the software still works, but I don't know of anyway have a boot disk.

  Help! I hate the idea that I have fried my phone on a software problem? :(

  Hello

  I m not an expert in Linux but for as far as I know this error message appears if the boot partition is available, BUT the file system is no more recognized by GRUB.

  If you try to boot from windows to check the grub.conf file contains entries
  root (hdX, Y) (or rootnoverify (hdX, Y)) and (hdX, Y) chainloader + 1

  See also grub manual;
  http://www.gnu.org/software/grub/manual/grub.html