Chart "sets" inside the symbols

Similar Questions

• animation inside the symbol depends on the click counts

  Hello

  for example, there is a hammer striking the rock

  If I clicked 1 time - cracked rock (animation inside the symbol)

  twice - destroyed semi

  Triple - completely destroyed

  I have tryied this but it plays all the animations at the same time:

  -Make stop() end of each animation

  -by clicking on the symbol:

  var i = 0

  i ++

  {if(i==1)}

  Play('1000')

  }

  i ++

  {if(i==2)}

  Play('2000')

  }

  and so on

  but he plays any animation

  where is the error? =)

  Hello

  Here's a demo file: incrementingButtons.zip - Box

  I use a global variable. I put it with the Panel of compositionReady: sym.setVariable ("i", 0). You can also use the creationComplete Panel.

  Then I increment in a panel of the event (for example: click): sym.setVariable ('i', sym.getVariable ("i") + 1);

• Adobe edge animate. Parallax inside the symbol

  Hello. Help me please do Parallax inside the symbol, not the whole

  Here is the project: Dropbox - Untitled - 4.rar

  Hello

  Here's an idea:

  code compositionReady:

  term var = sym.getDuration ();

  var width = sym.$("Stage").width ();

  sym.setVariable ('onMove', function (posX, posY) {}

  Chronology of the var = Math.round(posX/width*duration);

  sym.stopAll (timeline);

  } );

  Code of course. MouseMove:

  sym.getVariable ("onMove") (e.pageX, e.pageY);

  Note:

  sym.stopAll () target all symbols.

  If you want to target certain symbols, you can use the code below:

  term var = sym.getDuration ();

  var width = sym.$("Stage").width ();

  sym.setVariable ('onMove', function (posX, posY) {}

  Chronology of the var = Math.round(posX/width*duration);

  SYM. Stop (Timeline);

  sym.getSymbol("s1").stop (timeline);

  } );

• Start time set for the symbols on the timeline?

  Hello

  I've built several buttons - like symbols - that animate on screen and wants to shift departure times a little effect.

  I thought I'd be able to simply drag the symbols on the stage and set hours of departure by clicking on and dragging them on the timeline, but that doesn't seem to work. I see the 'read' and a + button but regardless of what I try, I can't seem to delay the start of the symbol.

  Any ideas?

  Thank you very much, I am stuck between the old Flash programming, development of Captivate and After Effects... Phew!

  Rich

  Hi Richard,

  I created a simple example for you. Check if it's how you want to play the animation.

  Thank you and best regards,

  Roger Simon

• Insert text field nested inside the symbol of JQuery .html

  This is one of those, "it must be so simple... of course, is not" question.

  Got a symbol nested. A fairly simple. Inside of the symbol is a background rectangle and a text field. When I click a button, it must insert the HTML code, I give him the click event.

  Now at first I did using only the text field per itself. No nesting. This is the code:

  SYM. $("copie") .html ("Edge Rocks!");

  OK, success! The text is loaded correctly.

  Now let's insert this text inside a symbol field. And we'll call this symbol "content".

  Now, I'm trying...

  SYM. $("contenu").$("copy").html ("new text");

  Result? Nothing.

  Tried to use the scene instead of sym and even added a scene var = sym.getComposition () .getStage () before. Nope.

  Yes, they do not easily allow. So what is the solution?

  Here is my sample file.

  https://www.dropbox.com/s/5n1ehhsp7r3rbt6/text.zip?m

  BTW, he ran in the Firebug console. No errors.

  OK, I found it! This is it!

  sym.getComposition () .getStage ().getSymbol('content').$('copy').html ("text here");

• Control a symbol by a button inside the symbol

  I hope that this explanation makes sense:

  I have a file with buttons on the main stage that control symbols.

  (buttons are circles labeled 1876 and 1877)

  The symbols just move a PNG on and off the stage.

  For example, the two circles called 1876 and 1877 are PNG files to create buttons that control two different symbols.

  Symbols of moving the image of dashboard on and off the stage.

  In the Bulletin Board image is an X, I'm hoping to put a button on top of the side to close the symbol.

  

  The code I use to move the symbols on the stage and is:

  var = sym.getVariable ("current") courses;

  If (current! = "") {}

  sym.getSymbol (current) ("out") .play;

  sym.getSymbol("syboard1876").play ("in");

  }

  else {}

  sym.getSymbol("syboard1876").play ("shortIn");

  }

  sym.setVariable ("current", "syboard1876");

  syboard1876 is the png of green card.

  No idea how I can get the symbol to move off the stage by pressing on it?

  And that I'll be able to have several buttons under the symbol (which are hidden under the b = green card when it is visible)?

  This is the original tutorial that I adapted the EEG of the animation to work so far.

  Tutorial: Relying on the independent symbol a calendar «Adobe Edge leading Team Blog»

  Now, I just need to find a way to give the user the possibility to use the X to close the symbol.

  Any suggestions?

  1. you could use $each () with jquery in compositionReady
  2. If not you need to go back to the stage with sym.getComposition () .getStage () or
  3. You can use this in compositionReady

  function useButtons (element) {}

  {sym. $(element) .bind ("Click", Function ()}

  SYM.$('image').Attr('src','images/'+element+'.PNG'). CSS({"Opacity":1.00});)  This is an example of code - I used the same name for the buttons and image names.

  });

  }

  Add here the names of button

  ["," "," "] .forEach (useButtons);

• Selection of setting inside the component af:table LOV

  Hi all

  I use Jdev 12 c.

  I can't find anything on the definition of the selection of a component of SelectOneChoice when it is inside a table.

  My use case: I'm iteration in a list of serial numbers, and ask a CreateWithParams liaison to a number of different parameters.  Those new lines appear in an af:table component.  One of these parameters can take the values 1, 2 or empty.  For this attribute, I have set up a selectOneChoice with a fixed/static LOV to the choice.  Now, the CreateWithParams is correctly set the value of the ViewObject line, but I don't know how to set the selection SelectOneChoice the correct value.  It is not done automatically.  Y at - it a way I can get the RichSelectOneChoice component in my managed java bean for each line so that I can manually set the selection of the component?

  Thanks for reading.

  Lance

  Solved the problem with a static list display object.  It was with my link layer.  The LOV was not part of the binding of the tree, so he was not updated correctly.  For those who have this problem in the future, put in place a static list view object and access it like a LOV in the view object related to af: table.

• SQL: how to integrate the setting inside the quotes for wildcard character %

  I would like to know how to change a SQL statement to include a parameter within double quotes. I want to use the parameter inside a statement such as: SELECT * table col WHERE AS '%@parm '.
  
  I can get the query to work without the parameter, but not with her? Is there a workaround for CS3?
  
  Thank you
  
  

  Well, after much trial and error, it seems I had to change the setting itself.

  and from this
  Request.Form ["TextBox1"]:

  for this
  '%' + Request.Form ["TextBox1"] + "%";

  Yay!

• Select the event inside the nested symbol does not

  It's actually based on a previous thread located here: http://forums.Adobe.com/message/5596353#5596353

  I thought about adding to this thread, but in many ways it deserves it's own separate discussion.

  I used the Zaxist examples and AMULI put in place successful. On a navigation bar located directly in the root.

  Now, the question is the same thing with a menu that is nested inside a symbol.

  In my example, I have a button that when you click on anime a symbol of navigation bar down. This works. Also, the LINK button retains its background color set to black until the user clicks another button in the main navigation bar. OK, he has no other button in this example. So just pretend and believe me, it works.

  Now in the nested clip, there is a similar function I Illustrazione in the compositionReady. Then I added my actions to each of the four buttons inside the symbol navlink nested. The rollover/rollover effects work well. But the click event shows an error. It is basically the same click event in the navigation bar on the root, which does not have an error.

  My code inside the compositionReady is;

  Reset the State of each button

  buttons = {}

  Reset: function() {}

  sym.getSymbol("btnLink").$("back").css ({"opacity": "0"})

  }

  }

  which button?  Zero means no!

  We set this variable to get know e what button

  WB = 0;

  Reset each State buttons Sub

  buttonsub = {}

  Reset: function() {}

  sym.getSymbol("btnCommunication").$("back").css ({"opacity": "0"})

  sym.getSymbol("btnIndividuality").$("back").css ({"opacity": "0"})

  sym.getSymbol("btnCreativity").$("back").css ({"opacity": "0"})

  sym.getSymbol("btnInclusivity").$("back").css ({"opacity": "0"})

  }

  }

  which button?  Zero means no!

  We set this variable to get know e what sub button

  SB = 0;

  
  I would like to only it where there are two functions. One for all main buttons and the other for all the buttons of the child. This way I can have two buttons stuck to the hover effect when you click them in order. If all goes well, that makes some sense.

  Here is my event click in the button "btnIndividuality" inside the symbol navLink nested:

  buttonsub. Reset();

  sym.getSymbol("btnIndividuality").$("back").css ({opacity: 1})

  SB = 1;

  The other three buttons are basically the same.

  So I tried a number of ideas. Especially goes directly from the stage and drilling down into JQuery. Nope.

  So the Firebug error is 'Javascript error in the event handler. Type of event = 162 item line ' we of edge.2.0.0.min.js. It's this line:

  function (a) {if (a) {if(!this.aSymbolInstances) this.aSymbolInstances = []; this.aSymbolInstances.push (a.getSymbolElement ())}}; Y = Function (a, b, c) {function f (c, b) {if (b.length > = 2 & & typeof b [0] = 'object' & & typeof b [1] = 'object' & & b [1] .Guy! == "onError") {var e; e = d.Event ("onError"); if (g) e.compId = g.getComposition () .compId; e.originalEvent = b [1]; d (doc indicator) .triggerHandler (e)} window.console.log ("Javascript error in the event handler.}} Type of event = "(+a)} var e = this [b [0]], g;" = If (typeof e = "function") if (b.slice (1), a = 'element') return function() {var;

  Why would I get this here and not on the root? What is the correct path to make it all work? If close, but not home right now.

  Files are located in:

  https://www.dropbox.com/s/xlgfeeyam9hyuf3/nested.zip

  Oops! Sorry, without my knowledge, that it was published before it is completed

  (3) thus, using Firebug, you get this when you trigger a click event

  

  In other words, sym.getSymbol ("btnCommunication"), the first statement in your buttonsub.reset function fails.

  In your mind, sym points to the instance of navLink, parent of the instance of btnCommunication.

  But the buttonsub.reset function is defined in the compositionReady event handler, so when it runs sym points until the symbol of the scene, which has no child symbol instance named btnCommunication. Where the bug.

  Therefore, the context of symbol should be past to the function as a parameter. Set it like this:

  buttonsub = {}

  reset function: ( symClick)

  {

  symClick.getSymbol("btnCommunication").$("back").css ({"opacity": "0"})

  And call it like this:

  buttonsub. Reset ( sym);

  In other words, the formal parameter symClick will receive as the effective setting, this actually sym sym pointing to the instance of navLink.

  Gil

  .

• Animate the edge - how to create a hyperlink inside a symbol?

  Hello

  I am facing a problem to create a hyperlink inside symbols.

  For example - the main symbol name is "left-nav '.

  Inside of the symbol of the "left-nav', I created 3 symbols, what is" menu-1', ' menu-2' & ' menu-3'.»»» Inside of the ' menu-1', ' menu-2' & ' menu-3' symbols, I created animation.»»»

  But inside the Menu-2 & the symbol menu-3 frame, I put stop action is "sym.stop ()";

  Here, I created a button inside the symbol menu-1, when I click on this button, it should play animation menu-2.

  It is very important to me. Help, please...

  Thanks and greetings

  E. Kumar Muduli

  Use this code if you want to add to an object/button inside a symbol to play the label on the timeline

  sym.getComposition () .getStage () .play ("spinBlock");

  Use this code if you want to add to the object/button inside a symbol to control another symbol on the stage.

  sym.getComposition () .getStage ().getSymbol("star").play ();

  Use this code if you want to add to an object/button inside a symbol to control a symbol within a symbol

  sym.getComposition () .getStage ().getSymbol("starB").getSymbol ("starCent er") .play ();

• Accessible inside the container Adaptive symbol?

  Hello.

  I created an Adaptive container on my main stage. He calls 2 symbols "layout1200" and "layout800".

  These symbols have fairly basic functionality, and that works inside the symbol.

  So drop the provision of symbols directly on the stage, the feature works very well.

  But call the symbols of layout through the Adaptive container, it no longer works.

  I have even converted the Adaptive container into a symbol, calling first of all of the symbols.

  So I'm pretty lost at this point.

  I hope someone can help me.

  Link to archived files work:

  https://DL.dropbox.com/u/2093612/adaptive_sensible.zip

  Link to doc html:

  https://DL.dropbox.com/u/2093612/adaptive_sensible/Adaptive%20and%20Sensible.html

  Thus,.

  Here's a first correction: attached file (Adaptive and Sensible2.an).

  Was what you expected? (I mean: action click)

• Paste in place inside a symbol

  Here's my situation...

  My main stage is stage size 1920 x 1080.

  I am trying to copy - paste an element (Group) of the chronology of the main stage in a symbol (the symbol is also part of this scene).

  When I copy - paste in place, the element is the biggest WAY that it was in the script of the main stage.

  Does anyone know why this is?  When I hit the stick in place inside the symbol, they should be the same size as she went out the symbol.

  Thanks - Mick-

  You have a small symbol. When you paste in the main scenario 100% object, it displays now larger too.

  You can fix this by looking at the numbers of the scale. Taking a simple example, if the symbol has a scale of 200, do the thing you stick be a scale of 50. Then it will look right.

• How to access the symbols on the main timeline of the nested symbol

  I have read the JSAPI edge but still no way to make it work.

  Very simple: you click on a button, a window will appear. the button that makes the window appear is supposed to hide elements of what he does. HOWEVER when I want to use a close button in the symbol (window) to make these symbols appear again, it does not work.

  Inside the symbol I tried:

  sym.getComposition () .getStage ().getSymbol("openTabButtBlack").show ();

  Does not work.

  sym.getComposition () .getStage ().$("openTabButtBlack").show ();

• switch inside another symbol symbols

  Hello!

  I have a symbol parent (symbolA) that contain another symbol (symbolB). When I click on the inner symbolB, I want to pass with a third symbol (symbolC) still inside the symbolA

  I can't find a solution yet

  Thank you very much

  Mirko

  Hi, Miruko-

  You can also use getParentSymbol().  Of symbolB:

  sym.getParentSymbol () .getSymbol ("symbolC");

  -Elaine

• Target a textfield inside a symbol?

  I have a symbol called Rectangle and a text called counter on the stage field. Inside the symbol, I have an another textfield called Counter2. For the event the symbol .click I have:

  sym.setVariable ("auditor", "1");

  SYM.$("counter").html (sym.getVariable ("Checker"));

  sym.setVariable ("auditor", "0");

  SYM.$("Counter2").html (sym.getVariable ("Checker")); error here?

  But I noticed that only one counter is changed and Counter2 was not intended. How to target Counter2 without moving in the main timeline?

  Hello

  Try this for second textfield (assuming that "Counter2" is nested in the 'meter'):

  sym.setVariable ("auditor", "0");

  sym.getSymbol("Counter").$("Counter2").html (sym.getVariable ("checker"));