Start time set for the symbols on the timeline?
Hello
I've built several buttons - like symbols - that animate on screen and wants to shift departure times a little effect.
I thought I'd be able to simply drag the symbols on the stage and set hours of departure by clicking on and dragging them on the timeline, but that doesn't seem to work. I see the 'read' and a + button but regardless of what I try, I can't seem to delay the start of the symbol.
Any ideas?
Thank you very much, I am stuck between the old Flash programming, development of Captivate and After Effects... Phew!
Rich
Hi Richard,
I created a simple example for you. Check if it's how you want to play the animation.
Thank you and best regards,
Roger Simon
Tags: Edge Animate
Similar Questions
-
Start time for the Timeline timecode
All my projects are starting about 5 min. on the timeline. Is it possible to make this start time shows in the timecode in zero display until the timecode shows the elapsed time of the project rather than the length of the line. My clients watch the blueray and give their notes using the bluray counter, it would be nice if I had a screen which was the same as theirs. I could use burned to tc, but that means make the whole 80 minutes. I could move the project from scratch, but that would spoil the audio automation.
Richard Knight
Upper right corner of the timeline, it is a small drop-down menu.
Select time start and adjust.
-
I am trying to decide whether to use the parameter Raster or vector in the States of the object when the majority of the screen is a picture (with a modest but important legend for children to read). The legend certainly makes it look more net as vector. But does the photo! The raster setting seems to make the lower-res images in comparison. In my first edition of my application, I thought that raster would be the best setting when the photo was the subject dominating the page. But now, after seeing how strong he looks like vector, (but with almost a refresh of the unacceptable time. Perhaps better on the latest iPad. Most of my readers/students in class will use iPad 2 s, which has a slower processor). I wonder if I should go through the trouble of changing States of photo objects that have the type as well to the vector. It doesn't seem to be as sensitive to a re - draw on the iPad 2 (non-retine)
Is Filesize hit if I make about 1200 on these objects range from Raster to vector? (It is a huge, highly interactive history book, so I'm curious if acutally go to vector on these photos would reduce the size of the file) What is the best setting for the overall performance?
I see the freeks screen outside for a bit if you try to pinch and zoom in a vector object (photo) vs raster. Which is disappointing. Does slow down load time/refreshment in frame, which is a little less. I also found that the drop shadows really bad that redraws effect in vector, almost vibrating in a slide show, for example. Thus, in cases where I need shadows, I'm sticking with Raster.
All tips go ahead?
Brian
Does that help? http://boblevine.us/Digital-Publishing-Suite-101-keep-text-sharp-in-raster-slideshows/
-
Hello
Does anyone know what charset LPX uses for the words when you export a project at noon?
I have set in Hungarian language of OS X. The correct character set for the Hungarians should be ISO-8859-2 (Latin 2), yet when I export a logical project that uses these words at noon, the external drive is not displayed correctly the
That is to say. o is displayed as Ăł or similar, any set of characters I use in other software
P. S.
I submitted a bug report, as this seems to be a bug, but there was no reaction yet on the report
PS.
Never mind, I just realized the character encoding used is UTF-8
-
Apple "final cut pro 7", high res Pro 422lt 1920 x 1080 (odd) clips, is this gradual?, no sequence definition 1080 progressive
How can I make sure that I have the best setting of the timeline for my clips. I did all the settings of Mount clips but there is no progressive setting for 1080 p. Images originally dslr Nikon that I used mpeg streamclip to convert to prores. Thanks for your help!
The frame for you size source of material is HDTV 1080i (16:9). That only sets the size of the image, not the domination of the field, it's what makes progressive or interlaced. The reason it's labels with the 'i' is that when FCP7 was abandoned by Apple, they have never updated the software in order to take account of 1080 p contents.
To make your progressive sequence, set the dominant field to None.
gerforce wrote:
Images originally dslr Nikon that I used mpeg streamclip to convert to prores.
In your screenshot of the properties of the element for your clip to the source, the material is interlaced. At the original camera file interlaced or progressive?
Also, the fps footage was actually 30 original and 29.97 not standard? 30 images/s is very limited its use.
MtD
-
I have a note of galaxy tablet. with photoshop touch in English, my question is can be set for the Spanish program
I could have sworn that PS Touch takes example of Android 'language & entry' slot parameter settings. for example, if it is set to English, then tap PS will be in English.
-
Not able to start agent cache for the requested data store
Hello
This is my first attempt in TimesTen. I am running TimesTen on the same host Linux (RHES 5.2) running Oracle 11 g R2. TimesTen version is:
TimesTen Release 11.2.1.4.0
Trying to create a simple cache.
The DSN entry section for ttdemo1 to. odbc.ini is as follows:
+ [ttdemo1] +.
Driver=/home/Oracle/TimesTen/TimesTen/lib/libtten.so
Data store = / work/oracle/TimesTen_store/ttdemo1
PermSize = 128
TempSize = 128
UID = hr
OracleId = MYDB
DatabaseCharacterSet = WE8MSWIN1252
ConnectionCharacterSet = WE8MSWIN1252
With the help of ttisql I connect
Command > Connect "dsn = ttdemo1; pwd = oracle; oraclepwd = oracle;
Successful login: DSN = ttdemo1; UID = hr; DataStore = / work/oracle/TimesTen_store/ttdemo1; DatabaseCharacterSet = WE8MSWIN1252; ConnectionCharacterSet=WE8MSWIN1252;DRIVER=/home/oracle/TimesTen/timesten/lib/libtten.so;OracleId=MYDB; PermSize = 128; TempSize = 128; TypeMode = 0; OracleNetServiceName = MYDB;
(Default AutoCommit = 1).
Command > call ttcacheuidpwdset ('ttsys', 'oracle');
Command > call ttcachestart;
* 10024: could not start agent cache for the requested data store. Could not initialize Handle.* Oracle environment
The command failed.
The following text appears in the tterrors.log:
15:41:21.82 Err: ORA: 9143: ora-9143 - 1252549744-xxagent03356: database: TTDEMO1 OCIEnvCreate failed. Return - 1 code
15:41:21.82 Err: 7140: oraagent says it failed to start: could not initialize manage Oracle environment.
15:41:22.36 Err: 7140: TT14004: failed to create the demon TimesTen: couldn't reproduce oraagent for "/ work/oracle/TimesTen_store/ttdemo1 ': has not been initialized Handl Oracle environment
What are the reasons that the demon cannot happen again to another agent? FYI, the environment variables are defined as:
ORA_NLS33=/U01/app/Oracle/product/11.2.0/Db_1/ocommon/NLS/Admin/data
ANT_HOME = / home/oracle/TimesTen/ttdemo1/3rdparty/ant
CLASSPATH=/home/oracle/TimesTen/ttdemo1/lib/ttjdbc5.jar:/home/oracle/TimesTen/ttdemo1/lib/orai18n.jar:/home/oracle/TimesTen/ttdemo1/lib/timestenjmsxla.jar:/home/oracle/TimesTen/ttdemo1/3rdparty/jms1.1/lib/jms.jar:.
Oracle@rhes5:/Home/Oracle/TimesTen/ttdemo1/info% echo $LD_LIBRARY_PATH
/home/oracle/TimesTen/ttdemo1/lib:/home/oracle/TimesTen/ttdemo1/ttoracle_home/instantclient_11_1:/u01/app/oracle/product/11.2.0/db_1/lib:/u01/app/oracle/product/11.2.0/db_1/network/lib:/lib:/usr/lib:/usr/ucblib:/usr/local/lib
See you soonI see no problem here. The ENOENTs are superfluous because it locates libtten here:
23302 open ("/ home/oracle/TimesTen/11.2.1.4.0/TimesTen/ttimdb1/lib/libtten.so", O_RDONLY) = 3
without doubt, it does the same thing trying to find the libttco.so?
23302 open ("/ home/oracle/TimesTen/11.2.1.4.0/TimesTen/ttimdb1/ttoracle_home/instantclient_11_1/libttco.so", O_RDONLY) =-1 ENOENT (no such file or directory)
Thank you for taking the trace. I really want to have a look at the complete file if you can send it to me?
-
Hello:
It seems it would be an easy thing to understand, but I'm deleting so far:
I have a video of the source of long, 10 minutes (actually a series of film clips 16mm which were telecined to a single uncompressed .mov 10-bit with continuous timecode by a film laboratory) on my project timeline. I need to be able to export a small section of the timeline for individual .mov files - and I need to be able to open the short .mov files in a logging of film application called F5. Currently, I'm making these videos in H.264 .mov files, since it is a format that F5 can read. Rendering/export selection "work area" of my project works very well, so it's no problem.
The problem I have is that timecode of the resultant .mov H.264 files do not match the time code on the timeline of the project of my first - they always start at 00:00:00:00. I don't want that. If I made (for example) a section of 00:05:10:00 to 00:07:00:00 on my project timeline, I need time to start exported .mov file code 00:05:10:00 and the 00:07:00:00, does not restart at 00:00:00:00. Is this possible?
I'm in first Pro CS6.0.2 on a Mac OSX 10.8.2, all installed updates.
Thank you very much.
works by using "title" (cause its alpha) but does not work using the video black... I have to jump through hoops to do it this way... is nuts... so title works fast
so you put cti where you want to start, updated title to the top he put above your video, timecode in, "generate", set the start time to slide the title at the end of your work for the export bar... and it should be good...
safe way to ann is good also
-
Question says it all. The site info geo, Mozilla application opens a box to ask for permission, I click Yes. And then, without even leaving the page, the site requests geo info once again, Mozilla appears a box again.
This behavior is impossible to use geo.
You can manage the permissions for the domain currently selected tab here and set an exception allow to share location.
- Tools > Page Info > permissions
You can access the Page Info via the menu on a web page and via the Tools menu (press F10 if the menu bar is hidden).
You can control and manage permissions for all areas on the Subject: authorizations page via the address bar.
-
Auto fill time system for the start/end OTL book times
Hello
Y at - it a default option the time-card output once at the time of the system.
Say on the card, a default button is the start time and end-time(and have these as read-only).
Is this possible in OTL with preferences?
The customer wants-away with the score clocks all together. If such a feature is available in OTL.
TIA,
VB
Published by: VB on June 13, 2011 17:39VB,
You can not add logic in layouts automatically fill the time based on the clock. You will have to depend on a custom process to do.
Less than entry delay is also day, not week. Look at the configuration of your test employee preferences.
-Shiv
-
Impossible to hide or to install the cumulative time zone for the operating systems Windows Update
February 2010 cumulative time zone update hourly for the Windows operating systems will be set up not to go when I hide it and tell him to mind yet.
Shows daily for about 2 months and never works.
Stop sending me useless updates that won't install!1. stop the automatic updates service:
Start > run > services.msc (enter) > [OK]
Double-click Automatic Updates > click Stop
(Stopping the service will take a moment)2 remove the contents of the download folder:
Start > run > %windir%\SoftwareDistribution (enter) > [OK]
Open the download folder and delete its contents
Close the window.3. go to the Windows Update Web site. Select CUSTOM and allow the analysis to be performed. Uncheck the box/deselect KB979306 and hide ("don't show me this update").
4. start the automatic updates service:
Start > run > services.msc (enter) > [OK]
Double-click Automatic Updates > click Start
(Starting the service will take a moment) -
Problems with static IP setting for the port forward through 2 routers
I currently have cable internet connected to a router (Linksys E2000 w / v1.0.03 firmware). This router is connected to another router, a Linksys E3200 with firmware v1.0.02. In order to correctly forward ports through the E3200, I understand that I need to set up a static IP address on the router.
I almost followed the steps in this video, but when I enter all the IP addresses for the static IP address settings, it allows me to access the router configuration page. I try to get the new IP address that I gave (which he tries to move automatically once I have save settings) and the connection times out. I am able to access internet otherwise, however. From here, I have to do a factory reset on the router and start from square one.
Anyone have any ideas? I'm quite frustrated and would like to get ports forwarded so I can get my server properly set in place.
1. If it has connected LAN - LAN you will need to disable the DHCP server on the E3200.
2. the best option would be to use the 'bridge' on the E3200 mode (in the latest firmware) and connect the internet port to the main router.
3. If connected LAN - LAN (or in Bridge mode) all internet related functions on the E3200, including ports are not relevant. There is no need to set up the port on the E3200 redirects. All shipping is done only on the E2000 and nowhere else.
4. What is the address LAN IP of the E3200? What is the address LAN IP of the E2000?
-
How to make the setting for the microphone internal on my Dell Vostro 1540/1550?
The speakers work, but the microphone does not seem to be connected.
Hello
· What operating system do you use?
· Were there recent changes made on the computer before the show?
· You get the error message?
Method 1:
Try using the Audio playback problems troubleshooting to solve the problem. It search common problems with your volume settings, your sound card or driver and your speakers or a headset.
Open the troubleshooting of Audio playback
Method 2:
I suggest you to update the latest audio drivers from the Dell website and check if it helps
http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
See also:
Tips for solving common audio problems:
http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems
Method 3:
I suggest you try these steps,
Step 1: Using Windows Sound Recorder to test the microphone.
You can use this section to find out if the computer can record a signal from the
Microphone and play again. Use Windows sound recorder to create an audio file using the following steps:
a. Click Start, all programs, accessories, and then click Sound Recorder.
b. click start recording and speak into the microphone.
When you are finished recording, click on stop recording.
Screen automatically opens.
Type a file name and click Save. A type WAV or WMA file is created in the Documents folder.
If you can record the Audio using the Microphone using the method above then theMicrophone works well.
Now, it should work in any application that Supports Microphone. If the computer records the audio using the method above, then it might be a problem with the Microphone settings. Now, check the following settings.Step 2: activating the Microphone.
a. Click Start, all programs, accessories, and then click Sound Recorder.
b. click start recording and speak into the microphone.
c. Recording tab showing a signal detected for the Microphone device
Note: must have green check mark on that Microphone icon. Is no green check mark, this means that it is disabled. If there is no green mark on micro it never works. To activate the Microphone, right click on Microphone and click Activate. If you do not see the Microphone in the list, right click on the white space and select devices see the disabled. Then, you'd see the Microphone. However, if you don't see the green check mark on it, right-click on it and click Activate. Select Microphone and click on set as default (if defined as default button is active).
If you see the green checkmark on Microphone the Microphone really works.
Step 3: Increase the Microphone sensitivity and non-disabling the Microphone.
a. Select Microphone and click the properties button.
b. move the slider up to 100% of its range.
c. If the mute is enabled, click the button mute to reactivate the device.
d. If the Microphone Boost is available, amplify the volume.
e. click OK to make the changes.
-
Change the color setting for the monitor at a resolution of the screen
Why have I not change the colors to true color (32 bit) to high color (16 bit) in order to have a clear view for some of the programs?
Hello
Your problem with clear display is not related in large part to the quality of the colors
I guess you have Win 7. Let's check some settings of
- Your resolution is set correctly? Go to display properties and check the resolution are set at the recommended.
- Set your level of color quality 32 bit true color
- Click on Start, and then click Control Panel option. Click view to open the options screen to change the size of screen text on Windows 7 operating system. Check if Smaller - 100% (default) is selected.
- Check the ppp settings go to set custom text (PPP) size and check if the value is 100%, and use Windows XP style DPI is checked.
What programs do not display correctly?
Please publish results.
Best regards
Andrew
-
Setting for the SkillBuilders Calendar plugin class
Hello, I use the SkillBuilders calendar plugin and I need to define a CSS class for an event. I use this definition:
< style >
{.newClass}
background-color: #000000;
border-color: #000000;
border-style: solid;
color: #FFFFFF;
}
< / style >
and I put the class properly in the query for the region. In my view, the class is defined for the event but does not show the color and the background color I need, is to show the default colors. Has anyone set a class using this plugin? Any thoughts? Thanks in advance.
I found the answer to the search in the css class.
. MyClass,
. CF-agenda .myclass .fc-event-time,
. MyClass {a}
background-color: black;
border-color: black;
color: Red;
}
Maybe you are looking for
-
A Mac Mini with these specs to run the latest version of Garage Band?
Hi, I am planning to buy a Mac Mini opportunity. He's probably an outdated version of Garage Band, so I was wondering if she could handle the latest version with these specs: Processor: 1, Intel core 2 duo 88GHz Memory: 1 Gb 667 Mhz ddr2 sdram
-
Hello I upgraded my icloud to 50 GB storage plan and have been charged twice for the amount, but my phone shows always low memory on icloud (31 MB only). What have I done wrong?
-
Dawn of War 2 demo games for windows live__
I try to install the demo and I have a steam account, but he wants a CD key and I've ever received, and I've never heard a demo demanding one.
-
I once had a problem with Windows Update, which gives me a family of .NET Framework through the window of Control Panel\Windows to update to Windows Vista, even if it has been installed and has Microsoft support help me through EasyAssist. The proble
-
Mssing Vista I bought a pc where it allows to be on Vista, the licens sticker is still on the pc, but I don't have a dvd, is anyway I can get Vista on back the pc without having to buy a new license?