HP envy 14 1050ca updates

Similar Questions

• no player under Linux Ubuntu - ENVY 14 1050ca SD cards

  Hello world!!

  Got this HP (envy 14 1050ca) a few months ago. Apart from the difficulties to install linux due to raid configuratios (I've posted about this before, finally, I got on top of it) the computer works very well under the new OS and now I can run Win + linux. The only thing is that so far he does not my SD card reader when I'm working with my partition linux... and also he does not SD cards when it is plugged into a USB card reader, which makes me think it's not a problem on the (i.e. the missing driver) SD card reader but some inability to recognize what kind of devices without distinction of the port their plugged in. Any ideas on how to make this work?

  Thank you!!

  Then it turns out that the problem was a built-in card reader is SD,.

  for those who needs her, answer, quick and easy, here

  See you soon!

• Envy 15-j104el: updated NETWORK WiFi card and RAM update

  Goodmorning to everyone

  I write this post to ask for information on the possibility to do an upgrade of hardware on my HP Envy 15-j104elsystem.

  That's what I would do:

  -Replace the network card (NIC) to a wireless better and possibly with a compatible AC NIC.

  -Update to 16 GB of ram, put benches with CL9 SODIMM

  The questions that I want to bring to your attention are:

  -There is a 'white list' for the wifi card on my BIOS (actually F66)?
  (consultation with the service manual there are little NIC OEM selled, y at - it ONLY compatible?)

  -Put the sticks of ram CL9 (instead of CL11 currently OEM mounted), I can inprove the overall performance?

  I want to install are:

  -Intel Wireless-AC 7260 more Bluethoot HMC 4.0

  
  -Kingston HyperX Impact DDR3L 16 GB (2x8gb) SODIMM 1600 Mhz CL9 (Kit)

  According to your experiences, is it compatible? I can buy them without any problem?

  Thanks in advance to anyone who can help me. Thanks for your suggestions

  In particular, I take this opportunity to greet and also need the help of my friend @visruth ;)

  1. no whitelist. Your laptop was conducted after HP stopped using a white list so that you can install any card with the right form factor and the number of antennas. The Intel 7260 card should work.

  2. you can install the CL9 memory but it will not do anything all run faster. The motherboard is made to operate at the speed of the OEM memory so the Kingston Hyper-X will work, but the specifications of it in operation will be the same as memory OEM.

• HP Envy 14-J009tx: updating the Nvidia driver is blocked?

  So, I bought this laptop last month, and I tried updating the Nvidia graphics driver for the last of the 347.52 version supplied with it. I opened the GeForce experience app to update, it tells me that it is impossible to connect to Nvidia. Not still even though I changed my home network to the endearing phone, it won't let me update, saying that it cannot connect to Nvidia and I should try again later. I also checked the firewall and AVG (I changed the antivirus immediately after purchase) and allows the application to access the internet.

  So my question is: is it done deliberately by HP or there may be something wrong with the whole of my ISP? And besides, I am interested in upgrading to Windows 10, will there be any problem with all the app that requires Nvidia? I really need the graphics I want to do a lot of CAD in the future.

  Thanks in advance.

  Hello MalvinVVV ;
  
  Let me welcome you on the HP forums!
  
  I read your post on Nvidia driver update and I wanted to help.
  
  It's generally a BAD idea to update the video drivers laptop NVIDIA (or AMD) because the OEM manufacturers often use specialized versions of video chipsets for which these pilots are not suitable.  The best approach is to update only from the OEM drivers.

  This link is to HP for your PC product page: http://support.hp.com/sg-en/product/HP-ENVY-14-Notebook-PC-series/7771343/model/8524508/drivers

  If you press the check now button, he will see if there is new video HP drivers for your PC, download and install them.  If there is no newer drivers, I would leave it alone.

  In addition, I checked the same page to see if there are drivers HP Win10 and there are.  So, if you decide to upgrade to Win10, you will be able to get drivers HP.

  Good luck
  
  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!
  
  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• HP Envy 700-327c: graphics card on HP Envy 700-327c update

  I just bought and am preparing to install an AMD over-pants W7000 C2K00AT 4 GB GDDR5 SDRAM PCI Express 3.0 x 16 ATI Nvidia Quadro graphics in my HP Envy 700 - 327 c.  Any input as to what I can do to make this a free update of the problem?

  You are welcome.

  I would like to do some research before buying a power supply.  You may need more power than I recommended.  It says in the specs it uses less than 150W, but even more than the current PSU can provide with other components.

  I'd certainly appreciate hearing how things are going.

• HP Envy 15-k204na: update the driver fingerprint sensor fingerprint validity cannot be installed

  I have a HP Envy 15 - k204na laptop, recently updated since Windows 8.1 for Windows 10.

  Following the update Windows 10, tune tuning showed a number of updates and I've updated them except the last one on the list - validity Fingerprint Sensor Driver Update - it is impossible to install.

  I have tried to install the update, but it back with a messaged Installation failed us.

  I tried this several times, after having re-boots, and he still fails to install.

  How can it be fixed so that this update (see HP Support Assistant 4.7) installs propoerly.

  A solution to this is urgent.

  Thank you in anticipation of a resolution.

  @EckC_25

  Your computer:

  Laptop HP ENVY - 15-k204na (touch) (ENERGY STAR)

  Your validity sensor driver:

  File name: sp72143.exe

  Communicate details

  Exit the: August 5, 2015

  Version 4.5.289.0 Rev.A

  You can try:

  Remove the driver from Device Manager > restart > install new drivers

  ======================================================

  Reference:

  HP SimplePass upgrade instructions

  Read the first page: Dragon Document guidelines

  See the Section:

  • 3 reinstall the existing fingerprint driver
    • Install and Delete 3D option Driver

• HP Envy 1440t h8: update the network map

  I bought my desire Desktop 3 years at hp store. Now, I would switch my network card because I got a new 802.11ac router. My office has integrated Bluetooth 4.0 and dual 802.11a/b/g/n wireless LAN band (2.4 Ghz and 5 GHz) featuring MIMO 2 x 2 technology, but instead, I want to upgrade to a Wireless WLAN 802.11 AC. But I don't know if it is possible to update.

  Can someone help me with this?

  Product name: HP Envy h8 desktop computer - 1440t

  Product number: C1U78AV #ABA

  OS: 8.1 Pro 64 bit Windows

  If you need mor information, let me know. Thank you

  Hello

  You should not have to replace your WIFI adapter.  It should be compatible with your new router as multiple bands should be available.

  I suggest that you configure communications WIRELESS "n" and see if you are having a better flow. Don't forget that the wireless signal a very weak signals will not produce the best performance.  Your ISP service may need to be increased depending on the speed you want.

  If you are not satisfied with performance "n", then you can consider this Intel WIFI card.  The sides of the user looks fine.

  Thanks for posting on the forum.

• Laptop HP ENVY 15-AH151sa: updated my new laptop Win10

  According to my HP Support Assistant earlier today, there was no updates that I need to install but then I had an interesting development.

  I accidentally clicked on my desk and saw a menu here. At the top was a link to AMD Catalyst Control Center, and from there, I updated my driver AMD. Move the screen now appears to be much better and I have more problems with my cursor is jumping around.

  The disadvantages are

  (1) I think that it has installed software to follow me and sent me things I don't want - ads, etc. There are plenty of games AMD announcements. I had to click "send me your stuff ' to continue the installation.

  (2) it has installed a program called M that WinPatrol alerted me. I had to accept such would not continue with the installation.

  (3) it installed MS Visual C++ 2013. I always leave MS comes out / update these. I can't understand why the AMD has installed and wonder if the next MU will change.

  So my question is why HP say does not need to update anything?

  I think this reinforces my another question here

  PS * beep *. An exclamation appeared on my HP Support Assistant icon. OFF to check something else struck dead.

  New Envy 15-AH151sa
  More old Compaq Presario CQ71-320SA screwed up by free upgrade from Microsoft of Win7 for Win10

  Taffy0872014

  You must run the tool clean AMD as it removes the video drivers.  You will not be able to install drivers to work up to what after the old ones are picked.

  That page is for your MODEL of PC, not for your specific PC, and this list is not for all of the software drivers for this model, updates for your PC.

  You should go to the page in the link and download the new HP Support Assistant: HP Support Assistant. HP® Official Site

  Good luck

• Envy 15-j108el: update Wi - Fi adapter

  Hello

  I would like to know if I can update/change my wireless HP Envy 15-j108el adapter because I have too many problems with this, the connection is very slow and only standing next to the router I can surf the internet in a decent way.

  The adapter is the Ralink RT 3290, I searched the internet and I found some bad reviews about it. Can someone suggest me a better adapter for my laptop?

  Thank you well in advance,

  M.

  Hello:

  First, verify that your current wireless card has 2 antennas connected to it.

  See the below maintenance manual to see how to access the compartment of the wireless card.

  http://h10032.www1.HP.com/CTG/manual/c04091768

  If the card has 2 antennas connected to it, I recommend that you install either the:

  Intel Dual Band Wireless-N 7260AN WiFi 802.11 a/b/g/n 2 x 2 + HP BT4.0 part # 717381-001

  or: (if you have or plan to get an AC wireless router)...

  Intel Dual Band Wireless-AC 7260 802.11 ac 2 x 2 WiFi + BT 4.0 HP Part # 710661-001

• HP ENVY TS: computer update

  I tried to update my computer but when I click on restart and update button computer re begins and it is not updating, it is to connect to the screen. The update was recommended by WIdndows via message that appeared on my desk. Initially when I tried to download the update he gave me a 8000... error.  Do there is a way to cancel the update?

  Hi @MSylwia95,.

  Thank you for visiting the Forums HP's Support and welcome. I read about your TouchSmart from HP ENVY laptop and get the error message trying to do a Windows update. Here is a link to the HP Support Assistant. Simply download and run the application and it will help with the software and drivers on your system, and it will do the updates for you.

  Note Remove all USB devices. Disconnect all devices of non-essential, as these can cause some problems.

  Plug the power supply directly to a wall outlet works. Do not connect it a power strip, surge arrester, or secondary power source as this could cause and issue.

  Before the update you did it ensure that your system is up-to-date with Windows. Here's something from Microsoft that could help.

  Please let me know how it goes.

  Thank you.

• HP Envy 5530: After update the software hp, scan function lost 5530

  My HP 5530 all-in-one worked perfectly.  I have 10 Windows on my computer.

  After an automatic update of the software of HP printer, the icon to access the functions went on the desktop.  Currently, there is no way to access the functions of scanning.

  Printing again.

  The printer says diagnostic scanner is fine.  I can use some third-party products to get scanner, but they are not nearly as good as what I had before the update.  How to cancel it!

  Hello

  Thanks for the comments.

  Try this:

  Left click on start > applications > file HP > HP Envy 5660 > "More" > open file location > right click Copy > paste on the desktop

  It will begin as an Assistant to many HP printer and you can go to scan for your scanning needs.

  Hope that helps,

  Please click on "Bravo Thumbs up" as an encouragement and "Accept as solution" if it helped to solve your problem.

• WANT n107na: HP ENVY latest BIOS update messed up my HDMI port

  I had a message of support center app updated to the latest version of the BIOS I did 30 minutes ago and my second screen was working fine. After that I have updated BIOS my HDMI port does not recognize this second screen at all, what I do is just not responding. Any help would be much appreciated as I need this second screen as soon as possible.

  Thank you

  Hi @Draganche,

  Welcome to the HP Forums! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP "First Time here? Learn how to publish and more'.

  Thank you for posting. I read your post and I understand that after you update the BIOS, your HDMI port does not recognize the second monitor any longer. I want to help you with this question.

  What is the version of your BIOS in Device Manager?

  Is - this version F.25 Rev.A?

  If not, please update your BIOS again.

  Also, update your chipset driver and the graphic and audio driver.

  http://support.HP.com/us-en/drivers/selfservice/HP-envy-17-N100-notebook-PC/8499288/model/8903915

  Turn off your laptop and monitor. Connect with a HDMI cable and turn on the laptop and check again.

  I would like to know if this time it works.

  Click the 'Thumbs Up' to say thank you. Click on "Accept as a Solution" If the problem has been resolved.

  Kind regards

• HP Envy 5660: Windows Update

  I am trying to install an update that is recommended, but I get the following message is displayed.

  He had problems installing the updates, but we will try again later. If you keep to see this and you want to perform an Internet search or contact support for further information, this can help:

  Hewlett-Packard Company WSD multifunction printer, multifunction printer, other sets of material - Null Print - HP ENVY 5660 - error 08024200 × b

  Hi @Jessie711,

  I see you found mistakes, trying to run the Windows updates to install the printer. I will definitely do my best to help you.

  I would say to uninstall all old software of the printer, if you updated to Windows 10. Then, download and install the latest drivers from HP.  Series printer e-all-in-one HP ENVY 5660 full feature software and drivers.

  How is the printer connected? (USB, Ethernet, WiFi)

  If you appreciate my efforts, please click on the "Thumbs up" button below.

  Please let me know the results. Thank you.

• Envy D410a scanner - update the firmware, cannot find options

  I recently had a problem with my printer/scanner Envy, HP Tech walked me through a firmware update.  Now scanning interface is new, and I can't find the different options on the left (mainly, in DPI how I want to scan and what size element I'm scanning).  Where can I find these options now?

  Thank you.

  [running my Envy D410a printer/scanner with a Mac OS 10.8 Mountain Lion]

  On Mountain Lion, System Preferences, Print & Scan, select D410a, then click the Scan, open Scanner tab, you can set the dpi etc it.

• Envy 15-k220nr: updated Intel 3160 AC card card Intel 7260 AC?

  Hi-

  I'm in the same boat as some other people and try to get the clearer a possible answer, before I move forward - I have a HP Envy 15 k220nr supplied with the intel 3160 1 x 1 AC card.  I want to spend at least an AC 2 x 2 card, if this isn't a 3 x 3, to get the best possible rates of my AC1900 router.  The safest bet on the outside using a USB 3.0 adapter external (which would be cumbersome and problematic) seems to be the Intel 7260 AC 2 x 2 card.

  Does anyone do this?  He settled without much trouble?  It worked once installed?  Have you seen a significant difference in speed?  No problem with the new card?  Tips for the installation?  Have been able to confirm the K220NR you had two sons of internal antenna to support a card 2 x 2 (or, and I doubt that I have this chance, it has 3 antennas)?  Please let us know - I want to upgrade, but to be sure it will work above all order and completely disassemble the laptop again (I already did once to install a 500 GB Samsung 850 EVO SSD and there wasn't a ton of fun).

  Also, to you or anyone else to pay attention, because I'm going to open the laptop anyway, is there a reason I shouldn't update the RAM at the same time?   It seems that the laptop supports the DDR3L 1600 ram; I think the upgrade from 8 GB to 16 GB - any anticipated problems with this, everything will work the RAM or is there a white list, is there a reason I should avoid it (above the RAM being the most difficult thing to access during dismantlement of this model)?

  Any help, assistance, information on how it worked for you, things to watch, etc. would be much appreciated.  I look forward to answers to the questions, that I have not like or thoughts in general about this.  Thank you!

  -Dan

  HP Envy 15-k220NR

  Intel i7 4720MQ

  8 GB RAM

  500 GB Samsung SSD 850 Evo

  I can now confirm that the adapter Intel Wireless AC7260 sector works PERFECTLY in a HP Envy 15t, specifically an HP Envy 15-k220nr (4720MQ plant, 8 GB of Ram, Intel i7 installed Intel Wireless 3160 adapter).  It works with Windows Pro 10 x 64 great - I can't speak for Windows 7/8/8.1 that I updated before installing (which I recommend), but I expect that it works on Windows 8/8.1 for sure and probably on Windows 7 without problem.

  I bought the card on Amazon; the model is "Intel network 7260.HMWG. R' - the. R is important because it is a revised version of the chip with improvements on the original.  It is, by the Intel reports, the same card SKU 7260.HMWWB. R - different SKUS simply represent different packages.  Check it out at: http://www.amazon.com/gp/product/B00MV3N7UO

  At the time I did, the cost of the card was $26.50.  It is a Mini PCIe card, which is the type of the computer used.

  It's a surprisingly simple upgrade.  I have simply shut down my computer, which has been already upgraded to Windows Pro 10.  As with all facilities, follow control measures for static (white room, wrist band), that screws follow-up go where (easier in this case because they are mostly identifcal when disassembly of the machine) and general practices for the maintenance of a system.  I would not recommend this upgrade is done by an amateur - it's a more complex installation, since you need to access the motherboard and remove the housing rather than simply to open a port on the underside of the computer.  That said, for having to open the base unit, it is a process very easy (relatively speaking) with this laptop.  It is useful that the repair is very complete.  Be careful, because if you are not an authorized service provider and your computer is under warranty, you may void your warranty by opening the machine.  In addition, don't forget to keep the old card to allow you to reinstall and restore your computer to care factor if you need to send in warranty repair or want to sell it but keep the new card.

  It took my about 20 minutes to take it apart, install, test and go back.  Before you BEGIN, download the new drivers, you'll need - HP drivers are working, great and I always go with the current manufacturer on the OEM drivers drivers when possible because they are often optimized for the system.  You can also download download.intel.com drivers, but I would recommend get the driver WLAN wireless network current HP download page (http://support.hp.com/us-en/drivers/selfservice/HP-ENVY-15-Notebook-PC-series/7527530/model/7685078#Z7_3054ICK0KGTE30AQO5O3KA30R1).  This card, looking for the same drivers regarding the AC-3160 card because they use the same drivers.  Download the TWO the WLAN and Bluetooth drivers - to date, the drivers have been updated on 15/10/15 and are:

  • Bluetooth of Intel driver, version 18.1.1525.1470 [email protected]
  • Intel Wireless Driver, version 18.12.0.3 Rev.P

  After downloading the drivers, put them on your desktop or somewhere else easy access that you will need them as soon as you restart the installation and the wireless NOT work initially, following so if you do not have the drivers you have given to get them through a wired connection or another computer.

  I disassembled the machine by the Service Manual (http://h10032.www1.hp.com/ctg/Manual/c04510889).  Remove the battery and basic housing, disconnect the cables in water for the fingerprint sensor, the mouse and the keyboard and back on top of the basic coverage and put it against the monitor.  BE CAREFUL - this shifts the center of gravity of the computer and makes the computer to tip backward as I learned when I got mine from flipping back off of the table, I was working on - just be careful.

  After opening to the top of the enclosure, installation is incredibly simple.  The WLAN card is located at the back of the computer to the Middle - back where the hinges of the screen connect computer, centered between them.  You just pop off the two wireless antennas (YES - this laptop, despite the expedition with AC only 1 x 1 wireless card options, IT has two antennas installed at the factory, so it can support fully a card 2 x 2), then remove the screw from the card in place.  The map is displayed; bring him back (help little fingers - I have big hands and it was difficult because card is pressed against the back of the case) and pop out.  Insert the new card, tap it down, screw and reattach the antennas, making sure that the wire connected to the 'hand' on the original card is connected to the 'hand' on the new map, and the wire of "to THE" relates to "to THE.  On my computer, the black wire is the main antenna, the gray wire was the second antenna.

  If you're like me, after installation, you can set reconnect the keyboard/mouse/finger print sensor and reboot the machine before screwing everything together to make sure it works.   Just be careful if you do this.  When you restart, wireless will not work.  Run the installation programs for the drivers that you downloaded at the beginning of the year - I found install the dirver wireless, then bluetooth driver works better.  After installation and reboot, everything should work fine, including bluetooth.  I have had absolutely no problem with everything to work.

  Now the fun part: performance.  The map is hands down more quickly then the motherboard.  2 x 2 MIMO broadcast practically double your performance to download (assuming you have at least to AC1200 router that supports speeds of that card is).  I use an ASUS AC1900 RT-AC68U, a great router is worth every penny.  Speedtest.NET, my laptop on the wireless now easily continues with my internet service 60MBPS, going as fast as my wired connection (with the old card, he maxed out at around download 50MBPS; with the new card, it uses bandwidth full, closer to 70MBPS for us.)  Download speeds were around 4, 5-5 Mbps, to be expected in view of our internet service.

  File transfers are literally about twice as fast as prerequisites for the upgrade.  I supported sustained more than 8 Mbps download speeds when there are about 40 feet from the router with 3 walls and other elements of the way.  File transfer speeds are great, more 40MBPS transferring files to my NAS, compared to close to 20 with the original map (also from 40 feet with 3 walls and other obstacles).

  Overall, the performance is much better that the original card, as expected, the installation is simple and quick, and everything works perfectly.  I highly recommend this upgrade.