Chart with several selections of text by using the radio button

Similar Questions

• Simple form: just 1 text field and the radio button 2...

  I have a question about the Muse Widgets when it forms.  I have a very simple interface, I want to try to apply an additional tax of an amount of entry; I want to give the user the ability to select Add fresh or not.

  The only widget I found on current Muse was a Simple Contact form emails. I've stripped down to 1 input text, group 1 radio. I exported html code, added in the onclick event in the HTML for the radio buttons perform the calculation of the additional tax.  On the action of the form = "xxx", muse creates a few php files for validation and finally sending the form as an email, I have a test in the form e-mail address.  I can stub out that php and put in my own actions to waive the sending of the email.  I have 2 questions: ONE QUESTION) on the level of code there is a control of the syntax form fields (corresponds to the entered text input, is a selected radio button, etc.). SimpleContact form comes with 3 < p > < / p > due to the action of the form = "xxx" statement. The 3 lines correspond to the errors, which is a generic "server has encountered a problem." (something like that).  Does anyone know what code is to identify the error and how it is returned to the call statement? MuseUtils.js?  It is not in the action = "xxx" php referenced file.  It maybe too much, I'm interlacing syntax, semantic validation on a form after the muse html export.  Second QUESTION) is before all this... it all simple forms of 3rd party, I can use (Group 1 radio 1 text, drop-down list), which I can integrate Muse?  Looked at Muse-themes.  Don't have a complete package of e-commerce, yet.  (This is for a non-profit and trying to reduce recurrent costs).  Sorry, this is so wordy, appreciated by any direction.

  Answering the second question, you can check out these alternatives:

  http://musewidgets.com/search?q=form

  Thank you

  Sanjit

• How to use the Radio button

  Hello
  
  In my form, I want the radio button.
  
  On the selection of this radio button user can change the status of "QC" for "STOCK".
  
  Initially, when he disabled status should be "QC".
  
  How to put this in my form guide me please.
  
  
  Maury

  Make a group of Radio (say RADIO_GROUP16) with 2 buttons radio (mean RADIO_BUTTON17 and RADIO_BUTTON18).

  Specify the initial value of Radio group to U
  Specify the value of Radio to R and U buttons

  and in the status field to write after outbreak.

  If: block. RADIO_GROUP16 = 'U' then
  message ("can not update status '");
  raise FORM_TRIGGER_FAILURE;
  end if;

  I guess that when you select the second radio button (with the 'R' value) then only you would be allowed to change the status.

  Please check the answer correct/useful if th answer was helpful

• C6180: To avoid damage, use the power button / shutdown - message does not disappear and the printer is looping

  I have problems with my printer since arriving to a new home. I stop the printer before removing the cable, but seems could have pulled the power cable earlier than closing down.

  Since that time, the printer is looping with message "to avoid damage to use the off button /...» "- How do I stop and work again.

  Please help!

  Thank you.

  Heck!

  I was really hoping that would not be the issue.

  So, if I understand it, the question you receive looks like this;

  "It lights up and shows the HP logo and process bar animation for one minute, followed by the message:"abnormal termination. "  To avoid damage use on the button to turn off the printer.  Do not use a wall or the band switch to close.  Press OK.  Then he stops and leaves upward. »

   

  Try this:

  1. If the printer is still on, unplug all rigid and flexible cables at the back of the printer.

  2 unplug the power cord also from the wall...

  3. wait for two minutes.

  4 reconnect the power cord to a wall outlet first.

  5. hold the pound (#) and six 6 buttons.

  6. all by pressing the two buttons, reconnect the power cord to the back of the printer and at the end of two seconds, exit book and six buttons.

  7. turn on the printer if it goes out...

  Third times the charm, right? * fingers crossed *

   

• I used the Pencil button and now I have a button type of path instead of the regular "BOLD" T (for text boxes). I can't button "BOLD" T back instead, there is a T banked with a line.

  I used the Pencil button and now I have a button type of path instead of the regular "BOLD" T (for text boxes). I can't button "BOLD" T back instead, there is a T banked with a line.

  Opt/alt, click on the type on a path tool.

• Is there a way to select all text objects containing the specified character?

  Is there a way to select all text objects containing the specified character?

  For example,.

  My work consists of points and numbers.

  Points are separated into blocks of text, so are numbers.

  I want to select all points, so I group.

  Or numbers and group together them.

  

  Yes,

  -loop through all the elements of text

  -get each content

  -compare to '. '.

  -If the matching, save a reference to that block of text

  -When does with all frames

  -loop through all stored references and move to a group

• I have an iMac 27' 2012 with macOS Sierra and Apple Watch with watch OS 3, I can use the function "Log?" in Apple Watch

  I have an iMac 27' 2012 with macOS Sierra and Apple Watch with watch OS 3, I can use the function "Log?" in Apple Watch

  Hi John 2078 Tito.

  I understand that you have updated your iMac and Apple Watch and now you're curious about unlock your iMac using your Apple Watch. I know that it is a nice feature to be able to quickly and safely unlock your computer, so I'm happy to help you.

  This feature is available on 2013 iMacs and later versions, which means that your iMac won't be compatible. You can see more info on this feature here:
  Unlock your Mac with Apple Watch - Apple Watch user's Guide

  Thank you for using communities Support from Apple. See you soon!

• How do I configure the iPad2 to synchronize the iPad-Mailclient with Exchange 2010 via Active Sync using the certificate SSL client and name of user and password?

  Active Sync iPad ssl Client certificate

  How do I configure the iPad2 to synchronize the iPad-Mailclient with Exchange 2010 via Active Sync using the certificate SSL client and name of user and password?

  Hi Ewoki,

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the TechNet Exchange forum. Please post your question in the Forums TechNet in Exchange Server.

• Ideas to explain why, when you work with raw files in LR 2015 with Edit in PS 2015 and use the Camera Raw filter, the profile in the Lens Correction Panel tab is missing

  Ideas to explain why, when you work with raw files in LR 2015 with Edit in PS 2015 and use the Camera Raw filter, the profile in the Lens Correction Panel tab is missing? Mac OS X 10.10.5.  I reinstalled the OS and Lightroom and PS, nothing helps.

  Hi ParadigmRose,

  This is expected as profile tab behavior does not appear under Lens Correction Panel if you go to Camera Raw Filter in Photoshop

  However, profile tab would be there if you open a raw image directly in camera raw first.

  You can go to the filter menu > Lens correction in Photoshop, if you want to search for profiles with edit in Photoshop.

  Kind regards

  Claes

• When you use the new button tab is open a new tab, with a search engine that I don't want. How to change this to make it possibly open my home page?

  When I use the new button tab in the tab tool bar, it opens the Yahoo! search engine. I would like to change it to open my home page, or a search engine different. Is it possible to do it and how?

  Thanks for any help!

  I think that is changed by an extension. If you run Firefox in Mode safe search engine comes up when you open a new tab? http://support.Mozilla.com/en-us/KB/safe+mode

• Text in the radio button field triggers?

  I'm sure it is a simple and I just have a moment on Monday, but I can't seem to find it by searching on the forum...

  I have created a pdf form and I want an option button to automatically check when someone types the text in a certain area - how can I do this?

  I would be put in place so that none of the fields in each section can be filled-in unless one of the radio buttons is selected. If space fields are displayed if this option button is selected and the same thing with the hull of the Pre-Built program fields. You can do it in show/hide fields, and you would also want to reset the fields when they are shown/hidden. Coding can be greatly simplified if you use a field hierarchical naming system for the two groups. For example, fso.width, fso.depth, fso.area, fso.a$, etc. and pss.width, pss, depth, etc.

  You can then hide all fields selection of pre-designed Shell Scheme programs and reset and display all the fields only area and reset them with the following:

  Hide all fields selection of pre-designed Shell Scheme programs and reset the

  getField("pss").display = display.hidden;

  resetForm (["SSP"];

  Hide all fields only space floor and to reset

  getField("fso").display = display.visible;

  resetForm (["Fos"];

  This is not complete, but should help you get started. Note that you can set up A$ fields so that they are automatically calculated according to the value of the Total m2 field, so that the user doesn't have to come in and maybe make a mistake. You can also configure the computed fields to display a value only if the width and depth fields are completed.

• Average of the radio button selections, but exclude the equation 0

  This should be simple.  I've seen a lot of posts which should have led me to a Twitter.com response, but I still have trouble.

  Here we go:

  (1) I have 9 groups of radio buttons named: GMR1. 1_Score; GMR1. 2_Score; GMR1. 3_Score; GMR1. _Score 4; GMR1. 5_Score; GMR1. 6_Score; GMR1. 7_Score; GMR1. 8_Score; GMR1. 9_Score

  (2) each group of option buttons buttons 4 with the same values in each group:

  • "NA" where I put the Radio button choices under the Options tab = 0
  • "Fair" where I put the button choice Radio under the Options tab = 1
  • 'Good' where I put the Radio button choices under the Options tab = 2
  • 'Great' where I put the Radio button choices under the Options tab = 3

  Thus, the shape looks like a little at:

  GMR1. 1_Score

  • NA
  • Just
  • Good
  • Large

  GMR1. 2_Score

  • NA
  • Just
  • Good
  • Large

  and so on.  The user chooses a 1 option for each question.

  My goal is to get an average that excludes the selections of NA.  Compared with this average, I want to assign the specific text to appear.

  If I did it in 2 steps in excel, my formulas could look like:

  C7 = SUM (range) / COUNTIF (range, "> 0")

  = IF (C7 < 2, "overall score is fair, IF (C7 < 3, 'Overall rating is good', IF (C7 > = 3,"overall score is great!")))

  I think to that the following should work to count all selections does not match "NA" by excluding getField ("GMR1." + i + "_Score") .value == 0 a counter like the one below, but it is not!

  (The here's how I'm playing the part of the excel formula COUNTIF)

  ****************************

  var counter = 0;

  for (i = 0; i < = 9; i ++)

  {

  If (getField ("GMR1." + i + "_Score") .value == 1) counter ++;

  If (getField ("GMR1." + i + "_Score") .value == 2) count ++;

  If (getField ("GMR1." + i + "_Score") .value == 3) counter ++;

  }

  If (counter > 0) {}

  Event.Value = counter;

  } else event.value = "";

  ****************************

  The Sum (range) is simple enough using the "value is the sum "on the calculation of the properties of the text box tab.» But if I wanted, it's all happening in a block of code, then that won't work for me.

  ****************************

  The assignment of text based on the value average; I haven't got there yet.

  ****************************

  Help, please.  There must be a way to do all this in a fairly simple code that is simply eluding me.

  See if to change this instructs the following assistance:

  for (i = 1; i< 10;="" i++)="">

  It should have been an error in the JavaScript (Ctrl + J) console which provides clues as to what is wrong.

• Firefox crashes in typing or by clicking check box or the radio button, even with all the plugins / extensions removed. Check with many types of malware scanners.

  Firefox crashes in typing or by clicking check box or the radio button, even with all the plugins / extensions disabled, then deleted. Sometimes it hangs for five minutes. I checked the PC with several types of scanners of evil-ware, but none to be found. All hidden and deleted cookies, all DELETED & extension plugins. Remove all instances of Firefox PC and registry, then restored to bookmarks. The only thing that I did not is to remove and reinstall not my favorites.
  Windows Vista (yes I know) and FF 13.0.1

  Try disabling hardware acceleration in Firefox.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.
  • https://hacks.Mozilla.org/2010/09/hardware-acceleration/
  • https://support.Mozilla.org/KB/how-do-i-upgrade-my-graphics-drivers
  • http://KB.mozillazine.org/Firefox_hangs
  • https://support.Mozilla.org/KB/Firefox+hangs

• Can you have SMU 1062 q turn on without using the power button

  I use a q SMU-1062 for a test project that will take place inside a protective case.  The power button on the chassis will be covered by a plate on the protective case that make it boring and difficult to switch on using the power button on the chassis.  The chassis will be plugged into a power strip of travel - lite which is mounted in the case.  Is it possible that I can have the power to frame on when I turn on the power strip?

  I found another route.  In the controller BIOS, I changed the parameters of loss of AC power to TURN on after that AC is returned.  This allows me to use the power strip in my configuration to control the electric network distributed to the controller.  The following steps will describe how I got this.

  1. Power of the SMU-8115 controller.
  
  
  2. A message will appear on your screen, press to enter SETUP
  
  
  3. Select 'Remove' (quickly, because you don't have a lot of time before the window disappears and the controller continues to load normally.)
  
  
  4. This will open the main Menu of the BIOS
  
  
  5. Select the Advanced tab (use the arrow keys to highlight the selections and the different tabs, select a setting change with 'enter'
  
  
  6. Select > Configuration power and rest
  
  
  7. Change the configuration to power on when power is restored.

  The controller can be normally close by using the start menu, and "shut down".

  Start button / stop of the chassis is still capable of turning the power on to the controller, but now when I shut off the AC power strip and then return power, get the controller chassis.

• Cannot use the back button on the Web PDF pages

  I Windows 7, Internet Explorer (IE) 11 and Adobe Reader DC, all day. Whenever I go to a PDF Web page by clicking on a link in the Google search results and then want to return to the search results page by clicking the back button on the browser, it will not go back. Page PDF just charging once again. This does not occur when I use my browser Google Chrome, when I use IE. It happens with every page PDF that I access from the Google search on Internet Explorer. What can I do to be able to use the back button on the Web PDF page?

  Google made a diversion when you click on a search result. You can see if you right click on a such result and select Copy link location, and then paste. Is not the real address - the web site, but a link to a page of Google.com. So when you click on back after going to her, you can end up on the same redirect page, which automatically will then take you to its destination... Some browsers can handle this better than others, but it is not related to the PDF file you open.