Chassis not shipped croppping

Similar Questions

• connects not shipping to new sleep

  Well, here I am again... I've recreated the complete environment of DGTEST made a pass (following the instructions of http://www.visi.com/~mseberg/data_guard/Data_Guard_switchover.html) and after the crossing (now primary) sleep mode my log files are not shipped to the original primary server.
  
  I can't find anything wrong, and tnsping works as it should for services as well as the database.
  
  Wire Ref.: primary db newspapers going $OH / dbs location standby instead of dest_1
  
  Maybe I have an error in configuration net somewhere...
  

  From the NEW primary database server:  "brahe"
  ===================================
  
  $ [brahe] <DGTEST> /oracle/product/db/11.2.0.2/dbs>sqlplus / as sysdba
  
  SQL*Plus: Release 11.2.0.2.0 Production on Wed Apr 3 12:36:01 2013
  
  Copyright (c) 1982, 2010, Oracle.  All rights reserved.
  
  
  Connected to:
  Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
  With the Partitioning, OLAP, Data Mining and Real Application Testing options
  
  
  
  SQL> connect sys/sys@DGTEST_DG1 as sysdba
  ERROR:
  ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
  
  
  Warning: You are no longer connected to ORACLE.
  SQL> connect sys/sys@DGTEST as sysdba
  ERROR:
  ORA-12514: TNS:listener does not currently know of service requested in connect descriptor

  But still, I can't tnsping throughout the day with no problems...
  

  From the NEW primary database server:  "brahe"
  ===================================
  $ [brahe] <DGTEST> /oracle/product/db/11.2.0.2/dbs>tnsping DGTEST
  
  TNS Ping Utility for Linux: Version 11.2.0.2.0 - Production on 03-APR-2013 12:00:46
  
  Copyright (c) 1997, 2010, Oracle.  All rights reserved.
  
  Used parameter files:
  
  
  Used TNSNAMES adapter to resolve the alias
  Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = kepler.nnet)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = DGTEST) (UR = A)))
  OK (0 msec)
  $ [brahe] <DGTEST> /oracle/product/db/11.2.0.2/dbs>tnsping DGTEST_DG1
  
  TNS Ping Utility for Linux: Version 11.2.0.2.0 - Production on 03-APR-2013 12:00:52
  
  Copyright (c) 1997, 2010, Oracle.  All rights reserved.
  
  Used parameter files:
  
  
  Used TNSNAMES adapter to resolve the alias
  Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = kepler.nnet)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = DGTEST) (UR = A)))
  OK (0 msec)
  $ [brahe] <DGTEST> /oracle/product/db/11.2.0.2/dbs>tnsping DGTEST_DG2
  
  TNS Ping Utility for Linux: Version 11.2.0.2.0 - Production on 03-APR-2013 12:00:59
  
  Copyright (c) 1997, 2010, Oracle.  All rights reserved.
  
  Used parameter files:
  
  
  Used TNSNAMES adapter to resolve the alias
  Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = brahe.nnet)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = DGTEST) (UR = A)))
  OK (10 msec)

  On the new Standby server:  "kepler"
  =========================
  $ [kepler] <DGTEST> /oracle/product/db/11.2.0.2/dbs>lsnrctl services
  
  LSNRCTL for Linux: Version 11.2.0.2.0 - Production on 03-APR-2013 12:39:53
  
  Copyright (c) 1991, 2010, Oracle.  All rights reserved.
  
  Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=kepler.nnet)(PORT=1521)))
  Services Summary...
  Service "DGTEST_DG1" has 1 instance(s).
    Instance "DGTEST", status READY, has 1 handler(s) for this service...
      Handler(s):
        "DEDICATED" established:0 refused:0 state:ready
           LOCAL SERVER
  The command completed successfully
  
  
  $ [kepler] <DGTEST> /oracle/product/db/11.2.0.2/dbs>lsnrctl status
  
  LSNRCTL for Linux: Version 11.2.0.2.0 - Production on 03-APR-2013 12:39:57
  
  Copyright (c) 1991, 2010, Oracle.  All rights reserved.
  
  Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=kepler.nnet)(PORT=1521)))
  STATUS of the LISTENER
  ------------------------
  Alias                     LISTENER
  Version                   TNSLSNR for Linux: Version 11.2.0.2.0 - Production
  Start Date                02-APR-2013 14:20:11
  Uptime                    0 days 22 hr. 19 min. 46 sec
  Trace Level               off
  Security                  ON: Local OS Authentication
  SNMP                      OFF
  Listener Parameter File   /oracle/product/db/11.2.0.2/network/admin/listener.ora
  Listener Log File         /oracle/product/diag/tnslsnr/kepler/listener/alert/log.xml
  Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=kepler.nnet)(PORT=1521)))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1521)))
  Services Summary...
  Service "DGTEST_DG1" has 1 instance(s).
    Instance "DGTEST", status READY, has 1 handler(s) for this service...
  The command completed successfully

  Ok

  SID_LIST_LISTENER

  Are you listener named 'DGTEST '?

  Mine is the default so I use SID_LIST_LISTENER. If I remember correctly from its SID_LIST_

  Otherwise, mine looks like:

  # listener.ora Network Configuration File: /u01/app/oracle/product/11.2.0.3/network/admin/listener.ora
  # Generated by Oracle configuration tools.
  
  LISTENER =
    (DESCRIPTION_LIST =
      (DESCRIPTION =
        (ADDRESS = (PROTOCOL = TCP)(HOST = myhost)(PORT = 1521))
        (ADDRESS = (PROTOCOL = IPC)(KEY = REGISTER))
      )
    )
  
  SID_LIST_LISTENER =
    (SID_LIST =
      (SID_DESC =
        (SID_NAME = PLSExtProc)
        (ORACLE_HOME = /u01/app/oracle/product/11.2.0.3)
        (PROGRAM = extproc)
      )
     (SID_DESC =
        (global_dbname = STANDBY_DGMGRL.myhost)
        (ORACLE_HOME = /u01/app/oracle/product/11.2.0.3)
        (sid_name = STANDBY)
      )
    )                    
  
  ADR_BASE_LISTENER = /u01/app/oracle
  
  INBOUND_CONNECT_TIMEOUT_LISTENER=120
  

  The ADR_BASE_LISTENER and the INBOUND_CONNECT_TIMEOUT_LISTENER should not cause you error.

  Sometimes, a rogue in the file will be.

  I think lsnrctl status does not LOAN show.

  I believe that we are close. (kind of pleasure, with the exception of the works do not)

  Best regards

  mseberg

• not shipped archive logs!

  Hi guys,.
  
  I use oracle 10.2.0.4.0 on windows server 2003. I created a standby database using the RMAN duplicate command. I also created re file password on the principal database as follows
  C:\oracle\10.2.0\database > file orapwd = password orapw$ ORACLE_SID = XXXX force = y
  and copied everywhere in standby mode. My backup database was created successfully, but my archive logs is not shipped in standby mode. I did also tnsping and it looks like okie. I pulled the following query in the standby mode:
  
  SQL > SELECT THREAD #, SEQUENCE #, APPLIED TO V$ ARCHIVED_LOG
  2 order of SEQUENCE #.
  3;
  
  no selected line
  
  No idea where I am going wrong. Would appreciate your help :)
  
  Thanks in advance!
  
  Concerning

  Check whether the user of your operating system is part of the ORA_DBA group. You can find this group by going to start > RUN > compmgmt.msc (type). Click OK. Click local users and groups, and then double-click groups. Yet once, double-click ora_dba. Find out if the user is member of this group. If not, add a user in the format domainname\username. Click on apply and OK.

  KK is right. If you cannot do the following primary school
  sqlplus sys/yyyy@standby
  then your logs will not be sent to standby mode.

  Also create password for Eve files separately (I mean create the standby server) rather than creating primary and took overall in standby mode, of course you can use the same password...

  Hope this works

  Published by: jazz81 on November 10, 2010 16:31

• PXI chassis not found after reboot host

  I use a chassis SMU-1073, Win7 and Labview 12.0f3 on the host. After a restart of the host, MAX is unable to find the frame and I need to reboot the host. Rebooting usually works, but often it is necessary to power down of the PXI chassis too. It is very tedious and time-consuming. There must be a way to simply restart the driver (single) and set things right after a restart of the host. Thanks for your help!

  Hi bjuberchaub,

  Let's see what crossrulz has to say about the race condition, but the situation you have described above does not sound like a driver problem.

  Regarding "if I cycle power on the chassis and try to reconnect", we recommend strongly cyclical food your chassis when your computer is turned on.  It is the equivalent to remove a PCI (e) card on a desktop while it is running. It can cause permanent damage to your system.

  The reboot sequence appropriate must be:

  1. Turn off the power to the host
  2. Disable the chassis
  3. Turn on chassis
  4. Turn on the host

  Never do anything with your chassis power when your computer is turned on.

  Given that:

  1. I'd be interested to see what looks like your Windows Device Manager when the steps above are followed.  Do you see unknown devices?
  2. The LINK is clear on the chassis power?  Is what color?
  3. This configuration never before without this behavior?

  If I misunderstood your comment about cyclical diet and you just follow the steps I have outlined above, I would be interested in getting answers to questions 1 and 2 when your system is in a State of non-working (e.g. restart you computer without rebooting the chassis).

  Kind regards

• After 100 hours, Playbook not shipped.

  On 10 March, I filled the form of address. Its been more than 100 hours, until then, although they have not delivered the unit. Did someone in the same situation as mine?

  And they also said that they are late and it will probably take longer than 72 hours for all products shipped. Everyone, please relax.

• How to deploy target (Crio) shared variable configured RT chassis, NOT of LIBRARIES

  I have a PC, connected to a switch RT target (Crio) THROUGH 5 port host.

  I want to be able to run a program on the host computer, that will load and run a RTexe on the target of RT.

  However, I want to be able to load and run different RT exe, which have different chassis configuration variable. Scaling, PWM DIO, ect... may be different from one program to a program for different channels.

  I know how to deploy libraries, but how do I Deploy/undeploy the chassis configured static variable?

  Hi teslaaaa,

  The attached photo, it seems you're looking for your e/s Scan Mode programmatically. We have a white paper section that deals here. The first section of the article discusses discovered by program your I/o modules, which you will get a reference to your modules. Then you will be able to configure the modules with nodes of this reference property.

  Let me know if it helps!

• Pavilion p6654y: ordered recovery disks have not shipped, HP incident status page says touch HP

  So, I ordered a new set of recovery disks for my (out of warranty) Pavilion p6654y, I received a confirmation email and a CSO number. For about 2 weeks I got the confirmation of order, but records have not delivered. Also, I checked with my Bank and the money for the purchase has not yet released. I checked HP incident status page to see what was going on and he told me "contact HP". They don't have sent other emails not to mention that the order confirmation, so I'm stuck sort of just ask yourself what's the deal.

  My problem is that I could not find any contact information for this kind of problem, does anyone know how I would go on to contact HP for a problem with an order for recovery disk?

  @crtibbs

  Please use the Forum from HP Support. I brought your question to the team within HP. They are likely to ask for information from you to get your information or product serial number. Please search for a private message from a contact HP identified. Also, remember not to publicly display (numbers series and information).

  If you are not familiar with messaging private forum please click here to learn more.

  Thank you
  Omar

• BlackBerry Z10 text message problem with BlackBerry Z10 - insulation, inadmissible, not shipping

  Having a few texts from major problems.  Sometimes when I touch on a contact, I send SMS it takes about 20-30 seconds for the key board and the cursor to arrive.  When you type, it takes 20-30 seconds for the next typing.  When I finally have the ready message, it will take 30 to 60 seconds to send... or I get an alert "failed to save the message.  I rebooted and tried to take the battery off-don't... no luck.

  This problem occurred intermittently for the last few months, but sometimes for an hour or two.  Currently, it has been almost 24 hours.  I'm getting very, very tired of these problems with this phone.  I've been a BB user for 7 years and will visit with someone else I'm frustrated that.

  However, my BBM works very well.

  Hello

  So, she was always like that? Or is this new behavior? If new, what happened just before the behavior started? An update of a certain type? A new application? Physically removed or damaged? Something else?

  Also, sometimes the OS itself just is damaged and a clean OS refill can be useful for troubleshooting problems.

  Official methods, which will be controlled as to what exact OS versions are available:

  • http://supportforums.BlackBerry.com/T5/BlackBerry-10-functions-and/how-to-reload-your-Blackberry10-O...

  Non-official methods, which are cleaner and allow you to choose a version of the OS that maybe your carrier (or anyone they control your offers) delays in approval:

  • http://supportforums.BlackBerry.com/T5/BlackBerry-10-OS-device-software/upgrading-OS10-devices-using...
  • http://forums.CrackBerry.com/BB10-leaked-beta-OS-f395/BB10-OS-archive-943672/

  Of course, before you start this, you want a good backup link, a manual copy of the memory of your device to your PC and complete documentation of your configuration (identification information of account, adding applications, configurations, etc.). Sometimes, restoring a backup returns unit corruption even, must be eliminated and reconfiguration from scratch can solve that.

  Be aware of the risks of 10.3.2 however... There are two things to worry about. First of all, be 100% sure that you know your BBID identifiers... If you do not, you may make your useless device to anyone, including yourself. Second, once you move to 10.3.2, you cannot fall back to 10.3.1 or earlier, by any medium (for example, even the unofficial AutoLoaders can not overcome this restriction anti-secours).

  Good luck!

• Linux Script - ORACLE_BASE environment variable is not shipped

  Hello

  I created a Linux script to execute a SQL statement and have several variables being passed in the script.  The script executes the SQL statement with no problems, but I see the following message in the log file:

  [/ u01/app/oracle/scripts/insert_asm_disk_usage.sh[8]:. : line 87: dbhome: not found

  ORACLE_HOME = []? ORACLE_BASE environment variable since it is not defined

  information is not available for the current user ID oracle.

  You can set ORACLE_BASE manually if necessary.

  The content of the script is:

  #!/bin/ksh
  
  
  # Declare variables
  export ORACLE_SID=$1
  export ORACLE_BASE=/u01/app/oracle
  BACKUP_MOUNT=$2
  export ORAENV_ASK=NO
  . /usr/local/bin/oraenv
  . $HOME/.env_variables
  HOST_NAME=$(hostname -s)
  LOG_DIR=/${BACKUP_MOUNT}/logs
  umask 022
  
  
  # Login to SQL Plus and execute the script
  sqlplus -s / @$SCRIPT_DIR/insert_asm_disk_usage.sql ${HOST_NAME}
  

  As I said, the script and SQL statement runs without any problem.

  Is there anyway around this message?

  Thank you

  Frank

  Frank.anellia wrote:

  I changed the script and way out the variables ORACLE_HOME and ORACLE_BASE instead of using .env_variables:

  2. #! / bin/ksh
  3. # Declaring variables
  4. export ORACLE_BASE = / u01/app/oracle
  5. export ORACLE_HOME=/u01/app/oracle/product/11.2.0/oracle
  6. export ORACLE_SID = $1
  7. BACKUP_MOUNT = $2
  8. Export ORAENV_ASK = NO
  9. . / usr/local/bin/oraenv
  10. #. $HOME/.env_variables
  11. HOST_NAME = $(nom d'hôte-s)
  12. LOG_DIR = / ${BACKUP_MOUNT} / logs
  13. MAIL_LIST =' [email protected]'
  14. umask 022
  15. # Connect to sqlplus and run the script
  16. sqlplus-s / @$ SCRIPT_DIR/insert_asm_disk_usage.sql ${HOST_NAME}

  It's not really help make the portable script, but no idea why it does not work with what is in the .env_variables?

  If you (you should be) using oraenv, do not set the oracle environment variables yourself. I put the following in each shell script that calls everything about oracle:

  # ------------------------------------------------------------------------

  # set the environment for ORACLE_SID

  # We assume that parm $1 was the name of the database, we work collaboratively with

  #

  export PATH = / usr/local/bin: $PATH

  export ORACLE_SID = $1

  Export ORAENV_ASK = NO

  . oraenv

  unset ORAENV_ASK

  I have seen the error that you report it.  I do remember not the exact fix, but what I do recall is that I found exactly the fix actually reading the oraenv script, focusing on where this particular error message is issued, then back followed the logic of there.  If I can do it, if you can, and it will be an exercise in good learning on several levels, not all of which relate to this specific problem.  I think SB has already referred to this approach.

  What else I remember correctly, is that the fix had to do with permissions... I think it was that I was connected the operating system with an account that did not have permissions to run certain process called oraenv.  But again, read the script and you should be able to get by.

• Data file not shipped from the primary database to the standby database

  Hello
  
  (1) create a new user
  (2) created a new table space and add datafile on the primary database
  (3) the value tablespace default user
  
  But so far, this new data file is not delivered on the standby database.
  
  Version of database - 10.2.0.3
  OS - Windows
  
  Setting of primary and Standby: -.
  
  SQL > show parameter standby_file_management;
  
  VALUE OF TYPE NAME
  ------------------------------------ ----------- ------------------------------
  standby_file_management string AUTO
  
  Both have the same file system, but the difference is case sensitive.
  
  Primary data file location - D:\testdata
  
  Location of file data at rest - D:\TESTDATA
  
  Help, please.

  MRP process is running on the standby database?

  If it is then try to pass, log on the primary database and share your result.

• Do not ship to the DR server located on the same server as the production.

  Hi all
  
  I have configured DR server on the same server as the production and delivery process and recovery journal has been stopped since the end of DR.
  
  OS = windows 7
  production instance name = test
  DR = drtest instance name
  name of the BD = test
  
  
  Even I created the password with the password for the sys file and renamed it in $ORACLE_HOME/dbs location such as "orapwDRTEST".
  
  Production of database password = orapwTEST filename
  File name of database password = orapwDRTEST DR
  
  
  Had error below at the end of primary school.
  
  
  SQL > select nom_dest, DEST_ID, STATUS, error from v$ archive_dest where dest_id = 2;
  
  NOM_DEST
  -------------------------------------------------------------------------------
  
  STATUS OF DEST_ID
  ---------- ---------
  ERROR
  -----------------------------------------------------------------
  LOG_ARCHIVE_DEST_2
  * ERROR 2 *.
  ORA-01031: insufficient privileges
  
  
  
  Please help me where I am missing and led to this error...
  
  
  Kind regards
  VAMSi...

  As your operating system is Windows password file must be present in below mentioned main servers and backup location.

  D:\oracle\product\11.2.0\dbhome_1\database

  Not in

  D:\oracle\product\11.2.0\dbhome_1\dbs

  Also check this

  http://www.adp-GmbH.ch/ora/Admin/password_file.html

• Printing problems (not shipping) a JPEG high resolution Windows 7 64-bit?

  I have looked for similar problems, but did not find in the forums.

  When I try to print a JPG file from printing in LR 3.6 (and also tried with 3.5) module, it does not always recognize the resolution settings.   Most of the time (and I don't see what makes the difference) it prints at a resolution of 96 DPI JPG regardless of what setting I use for resolution.

  It happens to someone else?

  Thank you

  -Luis

  As I posted this, I researched and found several known LR instructors (for example, Victoria B, Queen of Lightroom and others), that it is a documented bug in LR3.

  I agree that it came when I upgraded to LR3.6 on 64-bit Windows.

  The good news is that it is only a problem of labelling: it gives an account of 96 DPI, but is it really higher.   If you do the calculation of the size of the file and the dimensions, this is the correct resolution.

  See you soon,.

  -Luis

• TemporalProxyElement do not ship new duration

  Hello

  After my last discussion, where I asked for help to add a temporal trait a ImageElement and get it by wrapping it in a TemporalProxyElement I discovered that, although it works very well, but do not hurry a change of events. I made a custom playlist (not osmf sequence) and have some problems with it. There is no work around for this? How can I get that loading the TemporalProxyElement as part of MediaPlayer dispatches this event?

  Thank you...

  Chaim

  It is a known problem, associated with two separate bugs.  The first is that we would as MediaPlayer to distribute certain events (for example, durationChange) even when the underlying MediaElement simply picks up the line who organizes the event, but currently distributes only the MediaPlayerCapabilityChangeEvent.  If you were to you sign up for this event (the temporalChange), then at the reception event you can query the duration property, and have the right value. But right now you don't get this event either, because TemporalProxyElement isn't send events at the right time.  It is classified as a bug FM-126.

• onChange and DropDownList - event not shipped

  I can't get an onChange event when making a ListItem selection in a DropDownList control. I'm doing something wrong? (I am running XP Pro 32-bit)

      
       var dlg = new Window('dialog');
       var pnl = dlg.add('panel');
       var myDDList1 = pnl.add('dropdownlist',undefined,['one', 'two', 'three'], {name: 'ddList1'});
       myDDList1.addEventListener('change', myFunction);
       var myDDList2 = pnl.add('dropdownlist',undefined,['one', 'two', 'three'], {name:'ddList2'});
       myDDList2.addEventListener('change', myFunction);
       var myDDList3 = pnl.add('dropdownlist',undefined,['one', 'two', 'three'], {name:'ddList3'});
       myDDList3.addEventListener('change', myFunction);
  
        function myFunction(ev)
       {
            var ddl = ev.target;
            var props = ddl.properties;
            if(props.hasOwnProperty('name'))
            {
                 switch(props.name)
                 {
                      case 'ddList1':
                          alert ('change made in ddList1');
                      break;
                      case 'ddList2':
                          alert ('change made in ddList2');
                      break;
                      case 'ddList3':
                          alert ('change made in ddList3');
                      break;
                 }
            }
        
            ddl = null;
            props = null;
       };     
       dlg.show();
  
   
  

  It work?

  var dlg = new Window('dialog');
  var pnl = dlg.add('panel');
  var myDDList1 = pnl.add('dropdownlist',undefined,['one', 'two', 'three'], {name: 'ddList1'});
  myDDList1.onChange = myFunction;
  var myDDList2 = pnl.add('dropdownlist',undefined,['one', 'two', 'three'], {name:'ddList2'});
  myDDList2.onChange = myFunction;
  var myDDList3 = pnl.add('dropdownlist',undefined,['one', 'two', 'three'], {name:'ddList3'});
  myDDList3.onChange = myFunction;
  
  function myFunction() {
            alert (this.properties.name);
       };
  dlg.show();
  

• Show DataGrid being not shipped?

  Excerpts from simple mxml is
  

  Quote:
  < mx:DataGrid = show "trace ('foo'); ">