Public Static T3600 noise coming from headphones that are connected to the headset before decision-making.

Similar Questions

• There is no communication between devices that are connected to the Linksys WAP4410N Wireless access point?

  Hi all

  I have deployed the new Linksys WAP4410N Wireless Access Point and it works fine. Laptop which is connected to the AP may be able to access the internet. It can communicate with AP and also the gateway IP (IP Router) but it is wireless devices are not able to communicate with each other. In the case of peripheral LAN can communicate with wireless devices. Cannot able to share files between wireless devices.

  Please help me solve this problem. Wat could be the problem here. Stage of Wat I have to take to eliminate this problem.

  Advance thanks.

  Thank you and best regards,

  Chandhuru.M

  Hi, my name is Eric Moyers. I am a network Support Engineer in the Cisco Small Business Support Center. Please use the Forums to Post community of Cisco.

  The title of security without thread/how do you have isolation set up wireless?

  Insulation wireless (SSID) on the inside must be disabled to allow the computers associated with the same SSID to see and transfer files between them wireless

  Thank you

  Eric Moyers. : | :. : | :.

  Cisco Small Business U.S. STAC Advanced Support Engineer

  CCNA, CCNA-wireless

  866-606-1866.

  Mon - Fri 09:00 - 18:00 (UTC - 05:00)

  * Please rate the Post so other will know when an answer has been found.

• I have removed the cause of driver audio realtek that I did not like the noise coming from my speakers.

  * Original title: audio driver

  I deleted the audio driver cause real tek I didn't like noise coming from my computer speakers, now I have nothing lol how is that I can install to solve this

  Hello

  Do a system restore to a date before you had this problem:

  "How to make a restore of the system in Windows 8 and 8.1" . "

  http://www.eightforums.com/tutorials/4692-System-Restore-how-do-Windows-8-a.html

  If necessary, follow this path to make a system restore:

  "5 ways to boot mode safe Windows 8 & Windows 8.1"

  http://www.7tutorials.com/5-ways-boot-safe-mode-Windows-8-Windows-81

  @@@@@@@@@@@@@@@@@@@@@@

  Or go to your computer, or your sound card, the manufacturer Web site > looking for drivers and downloads Section > put in your computer or sound card (if you installed it yourself) model number > find your operating system > download and install the drivers etc you will find Audio.

  See you soon.

• Strange noises coming from the D command

  I bought a Toshiba computer and installed the program, the laptop produces a strange noise coming from the drive D as given that any departure or visit regularly. This happens like every 15 min or 20 min. Is this not a major problem. I just bought the laptop 3 days ago can I change my computer by another?

  I've had in the past a laptop making the same noise and the D drive stop working in 1 year

  Thank you

  Hey Buddy,

  Which drive D mean? The STRANGE internal or second partition?

  Which laptop model you purchased?

  Here he s a user to user forum and it is difficult to say if this is normal or not without hearing it. If in doubt, you should contact an authorized service provider. They can give you an official response on this behavior.

  In addition if your laptop is only 3 days old he should t be a problem to swap it with another.

• SatelliteA200 - 23 k - strange noise coming from the fan area

  I have my model A200-23 laptop Toshiba PSAE6E for 1.5 years and I recently returned from service.
  I sent there due to a nonfunctional key.

  All right, they changed the keyboard... but since I found, I have noticed some strange noises coming from the fan area...

  The sound is not so strong, but it's pretty boring.
  I cleaned using compressed air, but the sound has not disappeared.
  It is still under warranty, but I don't think they would do something against this noise.

  The laptop works very well, it is not overheating or something, but I cannot get used to the noise.
  Should Whatd I do?

  Hello

  Hard to say what noise would that be
  But if the laptop was removed by a technician of the ASP in the past, then you should get in touch with the same technicians again and have to explain your situation!
  A screw has perhaps forgotten who knows
  I think that the technician should take a new look on this laptop

  I wouldn't recommend open and disassemble the laptop yourself because you could void the warranty

• I would like to have at least 1 of my toolbars that are displayed at the bottom of my browser open screen. How can I move a toolbar from the top to the bottom of the page?

  I would like to have at least one of my toolbars that are displayed at the BOTTOM of my browser open screen. How can I move a toolbar from the top to the bottom of the page? I don't want to do this by using an extension, and when I read about the extension, I really have not seen how it would move the toolbar to the top-down any browser page open.
  Thanks in advance for the supply, the answer and the procedure to get this accomplished.

  You can't drag an entire toolbar to the bottom of the window. The Bar of the Addon is a "toolbar", drag whatever you want from the Palette to customize or a toolbar up to the bar of the Addon.

• -L' stop six options that are next to the lock button in the task in the task bar disappear from my computer.

  -The six closure options that are next to the lock button in the taskbar disappear from the my computer. When I click on the arrow next to the lock button, my only computer log screen and lock up instead of six normally closed options i.e (change user, locking, lock, re - start, suspend and logoff.)
  -The first step, I took is to check for assistance and support in my system, and I could not find a guide on how to restore six back closure options.
  -There is not any notification of any errors.
  -My product/name of Microsoft's Windows vista Home Basic edition. Model: Compaq presario CQ60 Notebook PC
  All I want is no details to restore my missing shutdown options. Or if you can restore it for me online.

  Hello

  • What were the changes made before the problem occurred?

  You can view these methods:

  Method 1:

  I suggest you to start your computer in safe mode with network and check.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 2:

  Try the SFC scan on the computer in mode noraml.

  SFC/scannow is a very useful command that you can use in any version of Windows. When the SFC (System File Checker) command is used with the/scannow switch, the tool analyzes all the important files of Windows on your computer and replace if necessary.

  Missing and the corruption of the operating system (like many DLLs) files are probably the main cause of the major problems of Windows. In view of this, plus the fact that the SFC/scannow is completely automatic and very easy to use, the tool should be usually one of your top not troubleshooting.

  Reference:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  Method 3:

  Run a full scan with your antivirus software and removal of malware/spyware.

  http://www.Microsoft.com/security/PC-security/MSE.aspx

  Malware:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/how-to-get-rid-of-malware/ba80504b-61f1-4D71-960f-b561798b7b42

  Method 4:

  You could also try to perform a system restore.

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

• Hotmail account: I can't receive e-mail from addresses that are not already in my contacts list

  I can't receive e-mail from addresses that are not already in my contacts list, for example the library.  My account has been hacked recently, and I have informed Windows CE.  I then installed Avast security.  Since only known e-mail senders spend their emails.  Help, please.

  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  It seems that Avast is blocking messages from anyone not in your contacts list (much too tight fixed).  Disable the function of checking email and see if that solves the problem.  If so, run it without the option of e-mail enabled - it does not really help as long as you take normal precautions (as not to open attachments from people you don't know / trust and things like that).  If you don't know how to disable this feature, contact technical support Avast (I do not use the product so I don't know how, but it's probably under Options or something like that).  If this does not work, try to go to Microsoft Security Essentialshttp://www.softpedia.com/progDownload/Microsoft-Security-Essentials-Download-131683.html where I know that this problem is not happen and see if that solved the problem.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I need a few files to restore from a time machine backup to a different MacBook Pro that is connected to the same network

  Hi, I recently "lost" my MacBook Pro because of water damage.  Fortunately, I've been using time Machine\Capsule and I have a MacBook Pro that is connected to the same network/device.  I need to restore a few files in the backup TM of the computer 'lost' on computer 'work '.  I was able to 'Browse' the other TM backup (click the icon TM plus the button 'Alt').  The Web browsing is extremely slow (took about an hour to break down / find the file on the network).  However, I tried to copy the file and I get errors of the alias.   Please advise me on what I am doing wrong.

  Thank you

  ggnpeter

  PS My OS is 10.9.5

  Visit Time Machine FAQ of Pondini helps with Time Machine.

• Does anyone know how to integrate a widget that displays quotes from stock market of listed companies that are mentioned in the web page?

  I'm developing a financial information site. I am interested in incorporating the latest prices of the companies that are listed on the stock exchange that also appear in an article... For example, if Tesco, Morrison and AstraZeneca are mentioned in a news article I write and publish, I would like a code/widget that displays the stock of these companies somewhere in the Web page.

  Thank you very much.

  If you use your search engine preferred to search 'widget scholarship', you will come to the top with a large number of results. If you develop a financial information site, however, you need to be very careful which widget you choose. I just looked at the terms of a free widget that comes up in the search results. It says "x.com may include links to third-party websites. Some of these sites may contain materials that are inaccurate, unlawful or objectionable. You agree that x.com will not be responsible for commercial activities or other activities that occur on a Web site, you access through links on x.com. "Choose the incorrect data source could destroy the reputation of your site. It would be preferable to opt for a paid service. However, even paid for the services do not necessarily provide a stock in real time.

  There is no Dreamweaver widget for the stock. Simply to assess third-party provider options yourself.

• My laptop does not recognize that anything that is connected to the USB ports

  Help, please. My laptop does not recognize that anything that is connected to the USB ports.

  Moved from feedback

  Original title: problems with USB ports

  Hi Alba.

  1. who is the operating system installed on the computer?

  2. What is the brand and model of the computer?

  This issue may be caused if one of the following situations arises:

  • The currently loaded USB driver has become corrupt or unstable
  • Your PC requires an update for problems that could conflict with an external hard drive USB and Windows
  • Windows may be missing other problems hardware or software updates
  • Your USB controllers may have become corrupt or unstable
  • External drive can enter selective suspend
  • Your PC motherboard may need updated drivers

  I suggest to connect the USB device to a different USB port and check.

  You can run the Fixit provided in the article and the Coachman.

  Reference:

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems

  You can also try the steps in the link and check if it helps:

  Reference:

  Tips for solving problems of USB devices
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  Note: Apply to Windows 7 as well

  Hope this information helps. Response with status so that we can help you.

• Problems loading a file in SkyDrive: "sorry, SkyDrive can't download files. Please download the files that are contained in the folder instead.

  Whenever I try to add a "xlsx" to "SkyDrive" document I get the following message:

  Sorry, SkyDrive can't download files. Please download the files that are contained in the folder instead. Neither I am able to drag and drop files in skydrive folder!

  I even tried as well to load it from the Office & do slip from the "Desktop" to the "SkyDrive" - but not of joy!

  Assistance would be greatly appreciated

  > Sorry, that SkyDrive impossible to download files. Please download the files that are contained in the folder instead.

  He tells you to OPEN the file, download the files on skydrive. BUR, NOT the FOLDER itself.

  You can download several files at the same time. How many? I'm not sure. I do not have more than 2 files both myself.

  SkyDrive limited maximum 50 MB each download.

• Will I lose my music downloads that are located in the "MY DOWNLOADS" folder "IF" I remove them, once they are transferred to my iTunes account?

  Will I lose my music downloads that are located in the "MY DOWNLOADS" folder "IF" I remove them, once they are transferred to my iTunes account?

  Hello JMarione,

  Thank you for your message.  Because it's really a question of iTunes I refer you to http://www.apple.com/au/support/itunes/.  Support you should get it will ensure that all your media will be transferred correctly.  This is a forum for Vista, and many people have different one from the other configurations.  A good answer for a single person on this forum could still lose you some of your files, because the installation program may be different.  Good luck.

  See you soon

• "Windows cannot connect to the printer. Make sure you typed the name correctly and that you are connected to the network. »

  I have a Windows Vista laptop. I usually have no problem printing over the network to my University Library. Then I bought a new Kodak printer to my apartment which I also configured to print wireless. For about a day, I could print from these two networks, depends on the location. Now, I can't print at the library. I am able to see all printers but when I try to 'Connect', it says "Windows cannot connect to the printer. Make sure you typed the name correctly and that you are connected to the network. "Word, printers of the University Library no longer appear in the list you choose to print. What should I do?

  Hello Lauren,

  Please take a look at this Microsoft article on "networked printer troubleshooting:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems
  I suggest to disable all security software, including firewalls, you have probably enabled or installed and then try to print again to see if that makes a difference:
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

• How can I get a list of jobs that are planned for the days of the future

  How can I get a list of jobs that are planned for the days of the future?

  In a previous article, I found a query that lists the scheduled tasks that are already running. Can I get a similar request for the future days which is compiled?

  Hi sreedevir,

  SELECT jobmst.jobmst_prntname, jobmst.jobmst_name, jobrun.*

  FROM jobrun JOIN jobmst ON jobmst.jobmst_id = jobrun.jobmst_id -joining tables jobmst and jobrun

  WHERE jobrun_proddt > = dateadd (dd, 1, datediff (dd, getdate())) 0, -future dates

  AND jobmst.jobmst_type = 2 -given jobs (and not groups)

  ORDER BY 1, 2 -Sort by name of the parent, then by task name

  Feel free to make any changes to your reporting needs

  ARO

  The Derrick