Hide lines that are zero in report

Similar Questions

• get rid of lines that are completely understood by the other lines

  using oracle 10 g
  
  I have a requirement where I have a few groups that have a start date and end date, and
  I don't know how many lines per group, it is dynamic.
  
  I need to get rid of all the lines that are completely understood by the other lines per group
  To tell if an online group has started on January 1, 2000 and ending on January 1, 2001
  and another group line begins February 1, 2000 and ends at 2000 1 dec
  only the line Jan to Jan should appear.
  
  so, for

  with t as
  (
      select 'A' grp, 1 id, to_date('01-01-2000', 'MM-DD-YYYY') start_dt, to_date('01-01-2001', 'MM-DD-YYYY') end_dt from dual union all
      select 'A' grp, 2 id, to_date('02-01-2000', 'MM-DD-YYYY') start_dt, to_date('12-01-2000', 'MM-DD-YYYY') end_dt from dual union all
      select 'A' grp, 3 id, to_date('03-01-2000', 'MM-DD-YYYY') start_dt, to_date('12-10-2000', 'MM-DD-YYYY') end_dt from dual union all
      select 'A' grp, 4 id, to_date('07-01-2000', 'MM-DD-YYYY') start_dt, to_date('01-10-2001', 'MM-DD-YYYY') end_dt from dual union all
      select 'A' grp, 5 id, to_date('01-01-2000', 'MM-DD-YYYY') start_dt, to_date('01-01-2001', 'MM-DD-YYYY') end_dt from dual 
   )

  I don't want to see

  GRP,ID,START_DT,END_DT
  A,1,1/1/2000,1/1/2001
  A,4,7/1/2000,1/10/2001

  Published by: pollywog on July 20, 2010 11:49
  
  Published by: pollywog on July 20, 2010 11:56
  
  Published by: pollywog on July 20, 2010 11:56

  Well, I do not get the exact release you do, but I'm sure that this complies with your verbal condition.

  You may have a fault in your output specified? It is also quite possible, that there is something wrong with my query :)

  with
     t as
  (
     select 'A' grp, 1 id, to_date('01-01-2000', 'MM-DD-YYYY') start_dt, to_date('01-01-2001', 'MM-DD-YYYY') end_dt from dual union all
     select 'A' grp, 2 id, to_date('02-01-2000', 'MM-DD-YYYY') start_dt, to_date('12-01-2000', 'MM-DD-YYYY') end_dt from dual union all
     select 'A' grp, 3 id, to_date('03-01-2000', 'MM-DD-YYYY') start_dt, to_date('12-10-2000', 'MM-DD-YYYY') end_dt from dual union all
     select 'A' grp, 4 id, to_date('07-01-2000', 'MM-DD-YYYY') start_dt, to_date('01-10-2001', 'MM-DD-YYYY') end_dt from dual union all
     select 'A' grp, 5 id, to_date('01-01-2000', 'MM-DD-YYYY') start_dt, to_date('01-01-2001', 'MM-DD-YYYY') end_dt from dual union all
     select 'A' grp, 6 id ,to_date('12-25-1999', 'MM-DD-YYYY') start_dt, to_date('01-05-2001', 'MM-DD-YYYY') end_dt from dual union all
     select 'A' grp, 7 id, to_date('02-01-2001', 'MM-DD-YYYY') start_dt, to_date('02-01-2001', 'MM-DD-YYYY') end_dt from dual
  )
  select
     grp,
     id,
     start_dt,
     end_dt,
     last_start_dt,
     last_end_dt
  from
  (
     select
        lag(start_dt)   over (partition by grp order by start_dt asc)  as last_start_dt,
        lag(end_dt)     over (partition by grp order by start_dt asc)  as last_end_dt,
        grp,
        id,
        start_dt,
        end_dt
     from
        t
  )
  where last_start_dt is null
  or
  not
  (
           start_dt  between last_start_dt and last_end_dt
     and   end_dt    between last_start_dt and last_end_dt
  )
  order by start_dt asc;
  
  G                 ID START_DT             END_DT               LAST_START_DT        LAST_END_DT
  - ------------------ -------------------- -------------------- -------------------- --------------------
  A                  6 25-DEC-1999 12 00:00 05-JAN-2001 12 00:00
  A                  3 01-MAR-2000 12 00:00 10-DEC-2000 12 00:00 01-FEB-2000 12 00:00 01-DEC-2000 12 00:00
  A                  4 01-JUL-2000 12 00:00 10-JAN-2001 12 00:00 01-MAR-2000 12 00:00 10-DEC-2000 12 00:00
  A                  7 01-FEB-2001 12 00:00 01-FEB-2001 12 00:00 01-JUL-2000 12 00:00 10-JAN-2001 12 00:00
  
  4 rows selected.
  

• check a result using lines that are different to the result

  Hello

  If anyone can help, I have Writer's block!

  I created a VI to create lines of limit for a test.  The VI creates a limit minimum and MAXIMUM by a user entered a frequency, the minimum and maximum limits by using a table.  The example I have is:

  Frequency Min Max

  2 MHz 0-10

  3 0-10 MHz

  3 MHz 0-12

  4 MHz 0-12

  This creates a line on my chart XY.

  When the test has been done, I want the result to check for stored limits.  So far I've posted online time result and limits on the XY graph, but I have trouble controlling the result that the table of results is different.  The results of the example that I have are:

  Result of frequency

  1 MHz - 9

  1.5 MHz - 11

  2 MHz - 12

  2.5 MHz - 11

  3 MHz - 12

  3.5 MHz - 13

  4 MHz - 13

  So in order to visually check the result I skip the first 2 frequencies and check others.  Y at - it a simple way to interpolate the berries to compare or will I have to wrap around the test frequency checking to check the limit or not.  An idea that I had been to calculate the increase in frequency of test and then recreated the table row limit to match the table of results.

  Any help would be appreciated!

  Try this it does all of the verification graphic design limit and anything that you want I think.

• 6509 PXI and SCB 100 Port 0 and 3 Port have lines that are high

  Hello

  I work with a PXI-6509 connected to an SCB-100.  When I run the test panels lines 0,1,2 are high on port 0.  0,1,2,3 lines are high on port 3.

  I have a voltage of 3 volts measured between Port0 line 0 and Gnd (PIN 47 and PIN 50).  Nothing is connected to my SCB-100.

  I put the switches for the recommended positions for Digital passthrough.

  SW1, SW2, SW3 => on

  SW4, SW5-online off

  SW6-online on

  Please notify

  I found the problem!

  It was a twisted spindle.  Straightend out and now it works!

• How to create a validation only for the lines that are created in a table

  Hi all
  
  I have a simple question. Is it possible to create a validation in a table that fires only for created?
  
  There is a possibility at the APEX 4.1 choose two types of "* execution scope *" is first of all ' * created and updated lines * "and the second is" * all subject lines. "
  
  Thanks in advance!
  
  Kind regards
  
  Jiri

  Hello Jiri,

  > Is it possible to create a validation in a table that fires only for created?

  You can still use the field lines created and updated the and use a PL/SQL Expression condition of:

  :APEX$ROW_STATUS = 'C'
  

  You will also need to change the Condition run for each line.

  It will be useful,
  Arie.

  -------------------------------------------------------
  Be sure to mark the appropriate fix/useful messages. For the long term, it will benefit us all.

• How to find lines that are inserted in the last minutes n?

  Hi all
  I have a log table where, whenever a warning is issued, a new row is added. The table contains a field with the sysdate when the warning was issued.
  I would need to collect all the warnings in the last 30 minutes (supposed) and send a mail to the administrator. Looking at some FAQ I have explained this:
  
  Select * from PROCEDURE_LOGS p where ((p.DATE_LOG-sysdate) *-1440) < 30
  
  However, it does not do anything.
  Can someone help me correct this statement?
  Thank you very much
  Frank

  Assuming that the field is a DATE field and time information are included in this field to date. Then your application should work.

  I would write it differently, but the logic is the same.

  select *
  from procedure_logs p
  where (sysdate - p.date_log) * 24 * 60 <= 30
  ;
  

  Perhaps the information is not yet committed, so that you don't see it in your additional session?

  Look at your data and consider wheather this record must be included or not.

• Get the ROWID of lines that are not not duplicate in Oracle 10 g

  Hello
  
  given a table TAB1 in which the primary key is composed of the first 3 columns:
  
  ================================================
  colA___colB___colC___colD
  ================================================
  AA-----------------------01-----------------------20080101-----------------------100
  BX-----------------------32-----------------------20050325-----------------------366
  AA-----------------------01-----------------------20080102-----------------------645
  AA-----------------------01-----------------------20080707-----------------------765
  AB-----------------------02-----------------------20080806-----------------------336
  AB-----------------------02-----------------------20080705-----------------------543
  
  I want to be able to find the ROWID of these lines where colA | colB occurs only once in the table TAB1.
  
  So in the example above, I would like to know the ID of the containing colA = BX line and colB = 32 as "BX32" appears only once in this table (AA01 happens 3 times, AB02 occurs twice, so I'm not interested in them).
  
  The following does not work, but it's too SLOW:
  
  Select the TAB1 ROWID where colA | colB = (select colA | colB of TAB1 HAVING COUNT (*) = 1).
  
  Can someone please suggest an effective way to find this unique ROWID value in these circumstances?
  
  Published by: Nemesis on November 29, 2008 02:50

  Hi Justin:

  Thank you for your support, I didn't know that the separate symbol appears. Sorry for all :)

• How to add only lines that are checked in a form?

  I have a number of lines in a form. Some people have a checkmark field and others do not. I want to create two calculated fields. One to give me the totals if the line is activated and the other to give me the totals if line is not checked. I can't understand how to do this.

  Hello.

  You should have followed the suggestion of Francis and use the possibilities of computing built into the forms.

  Approach:
  -Create a form element in the block where you have your field to summarize.
  -Put the 'calculation' formula mode
  -As a formula, put something like

  DECODE(:BLOCK.CHECKBOXITEM, 'Y',:BLOCK.ITEMTOSUMUP, 0);
  

  where "Y" is the value of the cehckbox when checked.

  -Create a block of control to the "Single Document" property value to true
  -put a formula-else that newly created the block, the value 'Calculation Mode' to 'Summary', block to summarize your data block element to summarize in the previous formula-column created.
  -But, but not least, set the property to "Question everything" block which your article to sum up to 'true '.

  She's. No need for any triggers or the same logic to take on a loop on the block.

  I hope this helps.

• Screening of lines that are not equal

  PL/SQL version I use is 11.1.0.7.0
  
  This is sample data
  
  Station of Seq ID Date
  __ ____ __ ______
  1 3/21 / 2012-12-1206
  1 2/28 / 2012 24 1712
  1 2/12 / 2012 20 1105
  
  2 3/20 / 2012 45 1206
  2 2/26 / 2012 46 1206
  2 2/22 / 2012 47 1206
  
  3 3/25 / 10 / 2012 1206
  3 2/18 / 12 / 2012-1105
  
  4 4/21 / 2012-22-1105
  4 4/20 / 2012 23 1105
  4 2/16 / 2012 24 1105
  4 2/16 / 2012 26 1105
  
  The date for each Id is required, but only if the station code is the same for all records, if not ignore all records.
  
  The expected result are
  Station of Seq ID Date
  __ ____ __ ______
  
  2 3/20 / 2012 45 1206
  4 4/21 / 2012-22-1105
  
  Thank you
  Paul

  SQL> select  *
    2    from  tbl
    3  /
  
     ID DT               SEQ    STATION
  ----- --------- ---------- ----------
      1 21-MAR-12         12       1206
      1 28-FEB-12         24       1712
      1 12-FEB-12         20       1105
      2 20-MAR-12         45       1206
      2 26-FEB-12         46       1206
      2 22-FEB-12         47       1206
      3 25-MAR-12         10       1206
      3 18-FEB-12         12       1105
      4 21-APR-12         22       1105
      4 20-APR-12         23       1105
      4 16-FEB-12         24       1105
  
     ID DT               SEQ    STATION
  ----- --------- ---------- ----------
      4 16-FEB-12         26       1105
  
  12 rows selected.
  
  SQL> with t as (
    2             select  tbl.*,
    3                     count(distinct(station)) over(partition by id) cnt
    4               from  tbl
    5            )
    6  select  id,
    7          max(dt)
    8    from  t
    9    where cnt = 1
   10    group by id
   11    order by id
   12  /
  
     ID MAX(DT)
  ----- ---------
      2 20-MAR-12
      4 21-APR-12
  
  SQL> 
  

  SY.

  Published by: Solomon Yakobson on 29 January 2013 13:56

• In Windows 7 we select several lines of data that are in a different location on the page (no continuous lines) through the mouse or keyboard and also can we copy all lines of these different at the same time to paste somewhere else in one fell swoop.

  > Now I'm unlable to select more number of lines that are not a sequence in a single page to copy the data rows and paste somewhere in one fell swoop.
  > Is this concept implemented in Windows 7. ?
  > Is there a provision (method) to select several lines that are not continuous across the keyboard or the mouse in windows 7?

  Byagaris,
  It depends on what program you are trying to copy and paste into.  You are able to select continuous, multiple lines, by using the Ctrl Key and clicking, or by highlighting the desired line.  For example, I held the Ctrl key and then, using the mouse, has highlighted several different phrases in the various paragraphs, and could then copy them.  This feature is available for several versions of windows.
  If you are not able to perform this action then post what happens when you try and what program you try it.
  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Lines that do not migrated because of filters are saved somewhere?

  Hi all
  
  According to my understanding, if I put a constraint on the target table in the models and use the control flow through a seam in the interface, the lines that do not meet the constraint get connected to the table of errors E$.
  
  I want to know that if I put some filters or join conditions on the source, the lines that are not migrated because of these filters, do they get connected anywhere. Until now, I used to check tables $ ca and my source and see that all lines have not migrate but is there any other table where the journal is maintained?
  
  Thank you and best regards,
  Prerna

  Hey Loren,
  You cannt see these documents. You must look in the backend... Let's say you have a filter SAL > 100 then you will get all information abot SAL<100. if="" you="" need,="" then="" you="" create="" one="" refresh="" variable="" based="" on=""><100 and="" get="" the="" count(*)="" or="" other="" possible="" information="" as="" per="">

  Bottom line: ODI will occupy on those records satisfying the condition not others.

  Thank you.
  http://bhabaniranjan.com/

• How to hide lines if all values are zero (0) horizontally?

  Hello
  
  
  
  I have a requirement to hide lines according to the results if all values are zero horizontally.
  
  
  

  Example:
  
  
  Region   M1    M2   M3
  
  East     0      0    3
  
  West    10     20    0
  
  South   -5      0    5
  
  North    0      0    0

  In the example above only North line must be hidden from results because all measure values are zero.
  
  Can you get it someone please let me know the logic to do this?
  
  
  
  
  
  I thank in advance.

  Hello

  Why do not you try a simple as filter condition:

  M1! = 0 or m2! = 0 or m3! = 0

  Thank you
  Karthik M

• Hi, my camera is a nikon d 5300. Lighrtoom is 5.7.1. Lightroom can't read and develop the pictures that are taken in raw. If I sort to import raw photos - there is the error report that lightroom does not have this kind of raw format.

  Hi, my camera is a nikon d 5300. Lightroom is 5.7.1. Lightroom cann not read or develop the photographs that are taken in raw. If I try to import raw photos - there is the error report that lightroom does not know this kind of raw format. My computer is 1 year (Win 7 HP). Who could help me?

  Eugen

  DJ, the version number is in the subject line: 5.7.1. It's weird because this version should support the D5300 very well. My main guess would be a bad player or a bad USB cable.

  Eugen, you can try plug the camera directly and download the images like this?

• Adobe story does not lines of dialogue that are amrked with (CONT'd) in a CSV export.

  For some reason any Adobe story does not export the lines of dialogue that are marked with (CONT'd) in a csv file. The rest of the dialogue exports very well, little bits that are marked with (CONT'd) are not displayed in the dialog column!. It can be changed with some settings or is this a bug? The script was imported from a file FDX. If anyone has a solution for this, please let me know.

  Thenk you.

  Thank you for reporting this issue.

  It is indeed a bug.

  Just to get the correct data in csv, a workaround for this problem would be to replace the word "suite" with a door-place Word, perform an export to csv and then change it back.

  1. press Ctrl + F in the script to open find/replace

  2. replace the word "Suite" with a placeholder Word, say "TEMPCONTD".

  3. the export to csv format script

  4. now replace the word placeholder with 'Suite '.

• I need a copy of Visual Studio 2008 while I have the same version of Crystal Reports that are used by one of my clients.

  Buy Visual Studio 2008

  I need a copy of Visual Studio 2008 while I have the same version of Crystal Reports that are used by one of my clients.

  Can I buy Visual Studio 2010 with MSDN Essentials and then download and use Visual Studio 2008

  Hello

  Welcome to Microsoft Windows 7 answers Forum!

  Thank you for visiting the Microsoft answers Forum.

  The question you posted would be better suited in the MSDN Forums. I would recommend posting your query in the MSDN Forums

  MSDN forums
  http://social.msdn.Microsoft.com/forums/en-us/VSX/threads

  I hope this helps.