Check if a GPIB device is turned on

Similar Questions

• PC to tv connection error "no signal - check the connections and the external device is turned."

  Original title: pc to tv connection

  I have an Acer Espire Vista 32bits. Connect to a Panasonic TC L32x30 HD TV. The TV has a 'PC' marked port that matches one VGA cable. I have the VGA end of the cable is connected to the TV. The other end is connected to the PC Tower via a DVI adapter to the port where was my monitor.
  TV output is set to "PC". I turned on my PC, the Acer (Bios) screen came. He then shows the block scroll bar. Just as Windows is about to light up, cutting signal. I never get to see my office. A message appears on the screen saying "no signal - check the connections and the external device is turned on."
  I had posted before saying that I had problems ranging from VGA to VGA. That's why I bought the DVI adapter to try another solution.
  I hope I made things clear enough for someone to help him.

  Hello Winston M,.
  I actually solved it. Went to the screen and chose. Connection just how I mentioned. second monitor, default Says. I then checked"Extend Desktop to this monitor.
  As I type this, I can see it on my TV screen.
  Thank you for taking the time to answer my question.
  Problem solved
  Ray

• Verification of GPIB devices

  Hello

  I have a code that sends a "* IDN? GPIB addresses 1 to 31, if I get a response to the motion, I guess there is a GPIB device address. This approach gets watered until when I have a GPIB instrument does does support/recognize the * IDN? query.   However, MAX is able to recognize that there is a GPIB device to the address of the instrument I have. Ideas of how recognize/detect if a GPIB device exist if it does not meet a * IDN?

  Concerning

  Kaspar

  Use the function of the same name on the Instrument i/o > GPIB > palette 488.2.

• Can't control RS232 and GPIB devices simultaneously with labview.

  Hi all

  I have a thermostat that has a RS232 to my computer connection and a counter from the source which has a GPIB to my computer USB connection.

  I have screws that allow me to control each device separately. But when I did a VI to fight them together that I can communicate with the GPIB device, but not with the RS232 device. I think that the VISA GPIB and RS232 VISA having a problem to determine this.

  Do you know what I could try to fix this?

  Thanks for your help.

  
  

• Netflix on media center crashes with the message 'checking activation of the device.

  Netflix on media center

  Netflix on media center crashes with the message 'checking activation of the device?

  Hello

  Try to disable the security software temporarily to see if that makes a difference.

  Note: Make sure to enable the antivirus on IT to make sure that your computer is protected

  For more information, you can also publish your quries Netflix community forums: http://community.netflix.com/forum or the Greenbutton

  Diana
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I decided to change to a fixed IP address, but I was told to check first our intruder devices

  original title * search for the intruder

  Hello, in the last month, we have every time new problems of sending e-mails with attachments, particularly to the Hotmail and G-mail accounts. The emails simply cannot, without any error message. Reason is that I think that we are on the blacklist every time again. I decided to change to a fixed IP address, but I was told to check first our intruder devices that can use our computers. My question is: How can I do this?

  Hi HelenPeterse,

  Thanks for posting your query on the Microsoft Community.

  Are you still facing the question to send Emails?

  1) go to your user accounts and see if there is all unknown accounts that are administrator. If so, delete the accounts. Make sure that you have an administrator account that you created and change the password if you are the only person who knows the password.
  Then, remove all the accounts that you are not familiar with or don't want on your computer. Do not remove a network Service or Local Service account.
  Do not delete the account administrator, or system or comments. However, you can disable the guest account.

  (2) change your passwords every day until you know you're is more compromised.

  (3) right click on the taskbar and open the tasks to the top manager. Go to the users tab. There you can see if there are other users logged on to your computer. If you are not familiar with users, select the account and disconnect the user.

  (4) get your computer course before you go out on the internet. Only to connect to the internet when necessary. You can disable your router if you are not on your computer.
  If you use wireless, make sure that you use the most secure authentication type.
  Change the passwords on routers as most ships with a password. Change the router password so that no one else has the password. Check with the documentation for the router on how to change your password.

  Hope this information helps and if you have interviewed more associated with Windows do not hesitate to post on Microsoft Community we will be happy to help you.

• GPIB device found, but not reognized

  Hello

  On a remote system, I have HP 3458 A and temperature control of Lake Shore 331 connected on GPIB. I installed a PCI-6259 OR on the remote system, as well as the NI VISA 4.2 and 11 in real-time. Also, I installed two devices instrument drivers on my local computer.

  With the help of VISAIC, I am able to see the two devices however, I am only able to use the HP 3458. The LS 331 GPIB address is incomplete; It's visa: / / [IP] / GPIB0::INTFC while the HP 3458 has is visa: / / [IP] / GPIB0:22: INSTR

  Any ideas?

  Thanks in advance

  I tried running the * idn to the device and I do not know what is the game of 331. However, it turned out that the GPIB cable going to the unit I tried to communicate with was a shame (not exactly how) and he began to communicate when I tried to use another GPIB cable.

  Everything is good. Thank you for your time.

• Try to update iPad OS10 and froze on "check update" and now unable to turn off the iPad.

  Tried to update iPad OS10 and "check update" has been spinning for over an hour 1/2 and impossible to each slide to open or to turn off the iPad.

  Hello

  If you are sure its impasse press and hold the power button / stop and menu button

  Hold both down until you see the apple logo

  It may take 30 seconds.

  You have enough space on ipad for download, you need about 4 g?

  See you soon

  Brian

• Cannot use my GPIB device with labview

  Hi all

  I installed my GPIB card, but now I am facing another issue. When I try to import device recognized by Visia (photo 1) it does not appear.

  My device is a function tektroniks generator. I just need 2 functions: change of frequency, type of wave and amplitude. Any help will be appreciated.

  Concerning

  Tektronix adapter?  I think you should go to your NI-VISA software section MAX.  Then under Options of VISA, there is a section for passports.  I'm fairly certain you need to activate the Tulip passport.

• Find resources VISA does not display my USB/GPIB device

  Hello

  I'm using LabView 8.0 with MAX 4.2.1.3001. I try to communicate with a former HP8563E Spectrum Analyzer with a GPIB to USB with VISA vi device nothing helps. When you try to find any valid VISA device with the vi 'VISA find resource' no device is returned. Can anyone offer any suggestions?

  -Chris

  Finally, I'll be back around him and the VISA drivers were not installed. This me baffled because in the latest versions of LabView, as 6.0, screws requiring some drivers (like writing serial port) were not available unless the associated drivers have been installed. Perhaps this philosophy has changed in more recent versions. In any case, thanks for your help

  -Chris

• Application of CLDC cause the power of the device is turned off.

  Hello

  One met this problem, when the execution of my application and for a while, the device has been turned off automatically. I tested several times, always happens, happens on dperipherique (not on the Simulator), the so I can't debug.

  My application is a SNS client it's network connection (http) and persist the data on the device, of course, the user interface to display the data.

  I think there is a mistake in my application caused the device to be off power (only slide off the battery voltage may start the device again). Anyone have any idea what could cause this?

  Thanks in advance.

  MoWriter

  OK, it seems apparent to the bad battery. Even thoug, it showed there is 1/3 battery, when some app run (not my own application), it would be off.

  If I plug the charger while test, then no power offshore.

• Whenever I wrote something on Firefox, it is used to check the spelling. But now Firefox doesn't check spelling. How can I turn it back on?

  Firefox used to check the spelling on everything I wrote. But since the upgrade to version 10.0.2, I don't see no Redline under the wrong words and no suggestion of spelling when I right click on the words.

  When you type something like these messages, right click, then select check spelling. You can also enable the option in the Advanced menu panel - accessibility, navigation, network, updates and other settings in advanced Firefox

  You probably already have the required dictionary (if you do a regular upgrade, Firefox should not change language version) otherwise, see https://addons.mozilla.org/en-US/firefox/language-tools/

• A GPIB device playback

  I tried to make a driver for the 181 keithley but got frustrated way, then I'm gone with the method of MacGyver thinking this would be much simpler, but I still have problems.

  My 'GPIB write' function works like a charm, the GPIB address is 5, and to interpret the great big chain (in case you are interested) here's what mean all the letters/numbers.

  X initializes communication

  T0 - affects continues in talk mode

  M0 - defines SRQ OFF

  R2 - affects my range to 20mV

  B1-tours on the Hi Res mode

  P1 - sets the filter off

  D0 - disables the depreciation

  The problem is that something goes wrong with reading GPIB or Fract/Exp chain to the number, and I can't get out the measure.

  5 is the GPIB address again (and is correct, because the upper part works very well)

  The value 0 is the mode which is the default

  and 14 is the number of bytes to read.

  My guess is either "14" needs to be a different number (did this question?  If I said to read more bytes, then the resulting string is in fact, not only will extra zeros?)

  I use a function badly, either read GPIB or Fract/exp chain number necessarily be replaced by another function GPIB.

  
  

• a device is turned off, avoiding as well as it fromworking correctly.

  the device, microsoft Teredo tunneling adapter, can not start correctly

  Hello kaungmyathein,

  At what point do we see this error and what it exactly is the syntax?

  Often we see odd behavior as the result of a program from loading at startup.

  To solve these, we use the clean boot troubleshooting.

  The following article describes this process:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Let us know.

  Best regards

  Matthew_Ha

• Error checking running on the device physics widget

  My widget is running in the Simulator, but when I sign and deploy on a physical device I get:

  Error at startup Bonneau: Module 'Blabla' has verification error at offset 0316 190 (codfile version 78)

  The physical device is a Storm 9500 running 5.0.0.216 on Vodafone Ireland. The first time around I had just used bbwp.exe to do everything. When I got the above error I then used the /s option that bbwp.exe would leave the source generated in place and then used JDE 5.0 beta 2 to generate the .cod file. Same result however.

  Tim Neil said in another thread that this error occurs with the first versions of the 5.0 OS. However, my Storm running an official version.

  Anyone?

  I just sent you a private message with some details.  Let me know the results