GPIB device found, but not reognized

Similar Questions

• new hard drive recognized in the device mgr but not my computer how to format?

  bought a new hard drive for additional storage running on xp home SP3.  It is recognized in the bios and in Device Manager but not on 'my computer '.  How can I access it to get in shape or to install the NTFS file system on it (if the formatting is incorrect terminology) then it will become usable as a storage device.

  You use the disk for this purpose.

  Start > run > diskmgmt.msc > OK

  Right-click on the unallocated space, choose New Partition and use the wizard to (a) define a drive letter, (b) the size of the partition and (c) format the newly created partition.

  For step by step directions: http://support.microsoft.com/kb/309000

  To keep things simple, to stick to "basic disks and volumes" and "primary partitions" (you can have up to 4 per physical disk).

• Hard drive of device cleaning but not in Solution Explorer.

  My second hard drive appears in Device Manager but not in Explorer Windows.

  Are you sure that your second hard drive is already partitioned & not empty?

  If you are sure then:

  Open the command prompt > type "diskpart" & press enter > type "rescan" & press enter

  You need administrator account to perform this task.

  To affect readers:

  Right-click on the computer icon on desktop > Manage > double-click Disk Management > see if there any unassigned disk exist or not

  If exists then manually 'change the letter from reader & Path '.

  If not exist to them discuss the second drive hard condition seen here as a schema Partition table. If possible, take a screenshot and upload it & share it with us.

  For more information download a screen shot here:

  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/thread/dfd9a97c-E6A1-4226-8c9d-59101a62bf7c

  Let us know if you need additional assistance.

  If you get the answer to your question, please go back and mark the reply as an answer while others may find it.

  If you get helped by a response to someone else's question, please indicate the useful post.

  S.Chatterjee

• Gamepad Xbox 360 as seen in "Device Manager", but not recognized as "Game controller" and will not be installed all the drivers

  My problem is very similar to the one raised here:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-gaming/Xbox-360-controller-seen-in-Device-Manager-but-not/fcf52151-604e-4BF3-BF55-2fa4930bc415
  However, the OP in this question unfortunately never had answer to his question.
  When I plug my Xbox 360 controller on my laptop, my computer recognizes it as a device, but does not recognize it as a game controller. Instead, my device is listed under a category called "Other devices", and the drivers are not installed (he gets the little warning sign yellow after the icon).
  I tried to install the correct 'Microsoft Xbox 360 accessories' (http://www.microsoft.com/hardware/en-us/d/xbox-360-controller-for-windows (Windows 7 64-bit)) and direct the machine to install its drivers from there, but nothing helps.
  I've tried right-clicking on the device, by clicking 'Uninstall', out in him plugging, uninstalling and reinstalling Microsoft Xbox 360 accessories, restarted my computer and each unique combination of these things.
  I tried to talk to an Ambassador of Microsoft, who told me to update the driver and manually make a 'human interaction device', but unfortunately it did not work.
  I called Support of Windows games, who gave me information from these links:
  support.Microsoft.com/kb/908888
  support.Microsoft.com/kb/906347
  Outside of download the drivers manually in the form of 'Microsoft Xbox 360 accessories' (which I already have), I wasn't able to try all of the hotfixes listed in the guides, because my camera is not listed as a joypad or human interface device. It is simply listed as "Xbox 360 Joypad" and it is listed under the heading "other devices."
  It seems that there is just something wrong with my USB and it's just is not installing drivers properly, but this isn't the case. I plugged many other devices, including an iPod, a mouse and an external HARD drive, which all had their drivers properly installed and works great.
  I also know that it is not a problem with the xbox controller, that I plugged into another laptop (also Windows 7 64-bit), as well as pilots very well on the other laptop.
  I'm really puzzled by this situation. Any help would be greatly appreciated, but please do not repeat the information or links I listed here, or who was in the last question which I quoted above. Thank you for your help.

  UPDATE: I finally got to work. Everything is beautifully detailed in this video from Youtube:

  http://www.YouTube.com/watch?v=kxa5CJsDzwQ
  Here's what you do:
  1. plug your device and go to Device Manager
  2 right click on everything that your computer recognizes your device as (for me, it was listed under 'Other devices' and had a yellow warning sign on this subject) and click on "Uninstall".
  3. disconnect your device
  4. If you have not already done so, download and install the appropriate for your device 'Microsoft Xbox 360 accessories' program
  5. plug your device back on and go back to Device Manager
  6 right-click on everything that your computer recognizes your device as (for me, it was listed under 'Other devices' and had a yellow warning sign on this subject), but this time click on "update driver software".
  7. click on "browse computer driver software.
  8. click on "Let Me pick from a list of drivers for devices on my computer.
  9. Select "Microsoft Common Controller" and then select your device. Have it install this driver. From there on, it should work on.
  If you have any questions, my email is * address email is removed from the privacy *.

• When I plug in an external hard drive usb, it is recognized in Device Manager, but not in Solution Explorer.

  When I plug in an external hard drive usb, it is recognized in Device Manager, but not in Solution Explorer. I use windows 7 on a laptop Pavilion dv7-6b77dx.

  Thank you.  I followed your instructions and it worked.  I am amazed by these forums.  No matter what a person has problems, there is someone out there who has the knowledge and the willingness to share with the less informed.  Thanks again for you information.

  lacroos

• External hard drive in the Device Manager but not in disk management

  So I have this external hard drive Western Digital 1 TB. I've had for over a year now and it was working fine. I would like to trade my XBox 360 and the computerregularly. Then one day I brought home, plugged into the computer and nothing. My friend and I couldn't understand anything. We have gone as far as removing the hard drive and put it directly into the computer. I have reviewed, that he has lost.

  Then yesterday, on a whim, I tried to connect it again to the USB port. It is presented in the Device Manager but says that its drivers have not been installed. Then, I changed the USB ports on the back of the computer and as if by magic, that this is once again. I had full access. Stupid (and you can see where this is going) did not immediately transfer anything off the hard drive. I'm looking for an image and listen to a song off of said hard drive when the drive went suddenly not recognized.

  I can see now the reader in the Manager of devices under disk drives, and USB devices. However it does not appear in the disk management window. And Yes, I checked as well the Productdocumentation upper and lower, that it is not listed. Go to the area where you assign drive letters not shown not be. Normally this is E:.

  I also tried to remove the UpperFilters registry in regedit. It was not to remove LowerFilters. Obviously, that didn't work or the other.

  I tried several cords and all my USB ports with no luck either.

  I went on the WD Web site, but they do not offer anything other than a partitioner that I would save rather than as a last resort as there are a number of things on the hard drive I want to save.

  So it's not like it's a new HD to be partitioned or an old man who comes out crapped. I know there's the data I just need to get home long enough to get what I need. Maybe I missed my window, but maybe I did not. Maybe someone can help. I'm at the end of my mind on this thing.

  Sounds like a problem of partition (maybe corrupted partition tables) if the device is recognized, but not the 'disk '.

  There are recovery/repair partition about tools.  Western Digital actually have some but I think that they are made for internal drives.

  If I were you, I start with WD and start looking for partition recovery/repair tools.  If this is the problem then it is the right kind of problem and you using the right type of solution can fix it easily.

  If this is not the case, some data recovery tools can help you recover some files even if you have to recreate a new partition, although I wish you much luck with this approach!

  Good luck whatever you try and make sure that you do not overwrite the what partition information, you have without making backups (many partition edititing software will offer backups)

• Hard drive shows in the Bios and Device Manager but not in disk management.

  I recently had a hard drive fail because of the excessive heat in the computer case (he also took a memory too). When I plug the drive as a secondary drive in any computer it will appear in the Bios and the Manager of devices, but not in disk management, nor can it be considered be as ZAR and Spinrite disk utility.

  The disc spins up and down when turned on and seems to work. Just trying to recover data from the disk, so I can put it on a new drive.

  Any ideas?

  If its not shown in disk management I would use this bootable HD to the utility check disk (probably all riders is set correctly?)

• gamepad Xbox 360 as seen in "Device Manager", but not recognized as "game controller": does not work in the game

  I connected my xbox 360 controller to my pc with the usb cable and downloaded the driver (I run XP Pro 32).  His does not work in-game.  I can see the controller in Device Manager (under the new group called xbox 360 devices) but it does not appear under "game controllers" in the control panel.  Im trying to use it with the Flight Simulator x.

  Hi Absolutemar,

  Welcome to the Microsoft Answers Community Forum site!

  In order to resolve your problem, please visit the below mentioned link.

  http://www.xbox360forum.com/Forum/

  Please perform the following steps also suggests:

  First we suggest you to download the Xbox 360 controller from the below mentioned link:

  http://www.Microsoft.com/hardware/gaming/ProductDetails.aspx

  Then install the Xbox 360 on your computer:

  Note You must install the software on your computer before you connect the gamepad Xbox 360 for Windows on your computer.

  To install the software, follow these steps:

  1. open the software that you downloaded from the Microsoft Windows gaming website or insert the Xbox 360 Controller for Windows installation disc in your computer's DVD or CD drive.

  If the screen does not appear automatically, click Start, click run, type the following command in the Open box and then click OK:

  DriveLetter : Setup

  For example, if the CD-ROM or DVD drive is drive E, type type, and then click OK.

  2. on the configuration screen, click install.

  3. follow the instructions in the Installation Wizard to complete the installation.

  Note You may be prompted to restart the computer.

  For more information about the Xbox 360 installation on your computer, visit the below mentioned link:

  http://support.Microsoft.com/kb/906347

  In this case, you need more information, you can visit the link below.

  http://www.Microsoft.com/games/en-us/community/pages/forums.aspx

  I hope this helps!

  Thank you best regards &,.

  Calogero - Microsoft technical support.
  Visit our Microsoft answers feedback Forum
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think

• USB-6008 appears in Device Manager but not in MAX or Labview

  I use Windows 7 Ultimate 32-bit and you want to use a USB-6008 in LabVIEW 8.5.1. The device appears under data acquisition devices in the Windows Device Manager. The flashing on the device, but the device does not appear in the Explorer of Measurement & Automation 8.7.1. am I missing something?

  He doubts.

  First, check the easy things... to refresh the list of devices to MAX and see if it comes to that.  I'm guessing you've already tried this, but it never hurts to check.

  My bet is that it's a database corrupted Max.  This happens from time to time.  Usually when I see it, the 'Dev1' always appears in LabVIEW if you plop down constant DAQ hardware or control.

  There are tools and processes to erase and start over with a new database, but in my experience, the best way to resolve it is simply update or reinstall MAX.

• Visible HDMI in "Device Manager" but not in "playback devices"... help please?

  HP Pavilion DV6-1245dx update to Windows 7 (from Vista).

  I had the problem of no sound on my TV with the HDMI connection. I had the brilliant idea to remove the driver and reinstall. The problem is that after I deleted the driver (do not know exactly what other that it was connected to the HDMI audio), the HDMI option as a playback device has disappeared. I clicked on "update driver software" (Intel High Definition Audio HDMI) in Device Manager (he said I had the current driver) and restarted. Yet, no HDMI option on the 'reading devices' screen. Any thoughts would be much appreciated!

  Thanks DP - K. I've updated the OP with model and noted the upgrade.

  In other news, I plugged a cable HDMI to the TV and then the HDMI in the "playback devices" window option became available. I removed the cable HDMI and sound still there. Again, I don't have audio, but will follow the fixes posted in other threads for that one. So I guess I'm fixed - I call this 'resolved' - thank you!

• External hardrive found but not found?

  I just bought a 500 GB external hard drive that connects via usb. I can find it in the Device Manager > dic readers the wdc wd50-00uuu3a0 USB key but if I go to storage > disk management it does not, from my understanding, it should be here and im supposed to initializze it, but I'm not. Help, please.

  See you soon

  It is always possible.  As I said, USB drives are usually easy to install.  Simply plug connect them to the USB port and they are automatically installed and ready to use.  I'll try to return it for a replacement see if this solves the problem (it can't hurt).  First of all, I would like to try to plug this device on another computer and see if it is recognized without any problems - then we know there is something on your PC and this disc which do not work correctly together for some reason any.  Perhaps the reader is not compatible with Vista or Windows7 - confirmed that it is www.microsoft.com/windows//windows - of thecompatibility withvista.

  Good luck and let me know.

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Hard drive shows up in Device Manager, but not in 'my computer '.

  I have a Samsung HD103UI SATA hard drive in a dual docking station Thermaltake Black Widow hard drive. I connected it to my laptop via a USB port. It appears in Device Manager and says it's working properly. It however does not appear in my computer. I go to disk management and presents itself, he says "Dynamic Disk 1, invalid. If I right click on the drive, it asks if I want to convert it to base, but if I do that I will lose my data. I hooked this same configuration of my XP machine and it worked fine, no problem. How can I fix without basic conversion and how do I get it to appear in my computer?

  End to this problem, that I had the hard drive on the xp machine unload everything out of it and reformat the hard drive on my Vista laptop. I did once it worked fine and I can move it back from my xp and vista machine. It's the only way I could get this drive to work.

• Windows 7 does not recognize my external hard drive and it does not appear in Device Manager but not in disk management

  I'm trying to connect to my external hard drive, but the auto test failed
  and I know that the problem is not the cable or anything like this cause it works on other 2 computers
  It won't work on my laptop
  I tried many solutions but most of them that the hard disk appears in disk management

  and they change its trajectory

  but in my case that's not she appears only in management device that I tried to uninstall it but also did not work
  After that I did any suggestions? !

  Go to your computer manufacturer's support web site and search for the latest Windows 7 drivers for your specific model number.

  Download the drivers to a folder on your hard drive and install all of them, from the card mother/chipset drivers, LAN, Audio, USB, Graphics, SATA, Webcam, Etc., and so on.

  List of computer manufacturer support sites:
  http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturers

  If you have an Intel motherboard, you can try the Intel driver update utility: http://www.intel.com/support/detect.htm?iid=dc_iduu

  Tips for solving common driver problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems
  Vista: http://windows.microsoft.com/en-US/windows-vista/Tips-for-fixing-common-driver-problems

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  J W Stuart: http://www.pagestart.com

• CD-ROM drive detected in BIOS and Device Manager but not Explorer or lag when you click

  The last time I tried to use my CD player, it worked very well. I recently got a game perfect state (checked on other computers, so it's good), and I can't install it because of the CD player.

  Already, it is detected by the BIOS and in Device Manager it's all updated with all its drivers and no yellow triangles.

  The rare opportunity that explore (thus, libraries in my case but nevertheless explorer.exe) fact feel the drive, I click on it and explore lagging until I opened the player and then I get the message "no disc in the drive (bah, I just opened the thing after you moved for hours)" I went to explore running for some time and eventually he listed things that were ready to write on a disk, not to read.

  Most of the time traveller feeling even the reader, even though Device Manager and BIOS a. Mr. Fix - It does not work either. They just keep running with nothing doesn't.

  On a side note, autorun does not start or when I put in the drive, so windows does not read the disc. The drive works perfectly as I see the LED flashes very quickly and spins the disc.

  Hello Izy - H,

  The CD/DVD drive may disappear if it has installed third-party filters. I suggest that you try the methods below to resolve this issue.

  Method 1:

  You can follow the link below and run the Fix - it who will automatically diagnose and repair problems with your CD or DVD drive when trying to read or burn media:

  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  Method 2:

  You can also try to remove the filters manually:

  a. Click Start and then click all programs.

  b. click Accessories and then click Run.

  c. type regedit, and then click OK, if you are prompted for an administrator password or a confirmation, type the password or click on allow.

  d. in the navigation pane, search for, and then click the following registry subkey:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  e. in the right pane, click UpperFilters.

  Note: You may also see an UpperFilters.bak registry entry. You don't have to delete this entry. Click UpperFilters. If you do not see the UpperFilters registry entry, you may still have to delete the LowerFilters registry entry. To do this, go to step h.

  f. in the Edit menu, click on delete.

  g. When prompted to confirm the deletion, click Yes.

  h. in the right pane, click LowerFilters.

  Note: If you do not see the LowerFilters registry entry, unfortunately this content cannot help you further. Go to the section "Next steps" to learn how you can find more solutions or more help on the Microsoft Web site.

  i. in the Edit menu, and click on delete.

  j. When you are prompted to confirm the deletion, click Yes.

  k. exit from the registry editor.

  a. restart the computer.

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756 ) how to back up and restore the registry in Windows

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• COM3 showing in Device Manager but not in the list of printer port

  I have a Datamax Allegoro printer that uses a USB series converter. The poster converter as installed correctly (in devices and Device Manager) and received COM3.

  When I go to change the player of the printer to use the COM3 port, it is not in the list. How can I get the COM port appears in the list of printer ports?

  Note: this port was already there, but anyway when I was working on some of the settings (I changed the adapter to use COM1 temporarily as a test, then when I went to change it back, it was gone). I tried to uninstall the driver for the adapter and then re-install again, it did not work.

  Thank you.

  Use system restore to go back to an earlier date at the beginning of the problem. To run system restore, click Start-> programs-> Accessories-> System Tools-> system restore. Click on the box that says show more restore points.

  Good luck.