Error checking running on the device physics widget

Similar Questions

• Netflix on media center crashes with the message 'checking activation of the device.

  Netflix on media center

  Netflix on media center crashes with the message 'checking activation of the device?

  Hello

  Try to disable the security software temporarily to see if that makes a difference.

  Note: Make sure to enable the antivirus on IT to make sure that your computer is protected

  For more information, you can also publish your quries Netflix community forums: http://community.netflix.com/forum or the Greenbutton

  Diana
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Attempt to sync music error - could not get the device certificate - C00D11E3

  Original title: C00D11E3

  I tried to sync music from my laptop to my brand new Sony Walkman NWZ - B153 MP3 player, but I got was a full load of a red cross on the left side of the lines of track information.

  "When I left clicked on one of the crosses, he said," cannot get the certificate of the device "whatever that means, more the C00D11E3 error code.

  I got a Sony's MP3 player before and I could download music o problem. So, why the problem with this brand new?

  Garry

  Hi Garry,

  (1) how you try to synchronize?

  (2) using any software provided by the manufacturer of the device to synchronize?

  Since you were able to synchronize your old MP3 player (from the same manufacturer) on the same computer, there will be some settings in the new MP3 player.

  Cannot get the device certificate, can indicate that the device is locked by the manufacturer.

  You can check with Sony to known problems

  http://eSupport.Sony.com/

  You can download Windows Mobile Device Center and check, for more information please visit the links below

  Synchronize music, photos, contacts, and calendars with a mobile device

  http://Windows.Microsoft.com/en-us/Windows7/sync-music-pictures-contacts-and-calendars-with-a-mobile-device

  Download Windows Mobile Device Center 6.1

  http://www.Microsoft.com/windowsmobile/en-us/downloads/Microsoft/Device-Center-download.mspx

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Impossible to determine the returned PID of launch when running on the device IDE 10.2 2.0

  It started just happening whenever I have try and run / debug for my device running 10.2. Tried the obvious restart / reboot... updated to 10.2... Update IDE to 2.0... Still nothing... No logs, error codes, nothing, just that the error!

  Lost a day to him already!

  Someone at - it had a similar problem and resolved it?

  But it looks like I found the solution!
  Just go to "Run" > "Run Configurations...". " on the tab 'Upload' in the 'Deployment' section select 'Install the app bar file' , then 'Apply' and 'Run'
  Do the same for the Configurations Debug...
  After that, I can running or debugging my application!

• Error on blackBerry Smartphones: the device cannot be read.

  When I navigate to ' settings-> Options-> memory-> the memory of the device I find the following message: "memory can not be read." Make sure the device memory is formatted. »

  

  1. How can I solve this message or the underlying problem?

  2. I suppose that he would not be a good idea to format the device memory - right?

  I did a "battery pull" without any difference.

  Any help would be appreciated.

  Info on the device

  Your carrier: AT & T

  Bold 9000 v 4.6.0.304

  Apps and free space

  Application memory space: 14.9 MB

  A battery pull fix your problem? NO.

  Installed applications: Standard more: Documents to go, Enterprise Messenger, Foursquare, Google Maps, Google Mobile App, Google Sync, Pandora, The Weather Channel, Twitter

  SR, when I upgraded my OS from 4.6 to 5.0, the device has detected the error memory and asked me if I wanted to correct. I accepted the proposal, a utility is run and the error has been resolved. Thank you, Henry

• Node connectivity error check beforehand in the installation of the grid

  Hello

  I am doing 2 node rac on oracle grid installation VMware(version-4.2) installation - 11.2

  My runcluvfy has been a success, here are the details. But when I started my installation of grid, that she didn't diligence node connectivity failure. It's because of VIP of the two nodes? Can I ignore this error and go further? Please guide me on this

  =======================================================================================================================================================

  [oracle@rac3 grid] $ clusterverify_new4.log more

  Conducting due diligence to install cluster services

  Audit accessibility of node...

  Check: Accessibility of node of the node "rac3.
  Accessible destination node?
  ------------------------------------  ------------------------
  rac3                                  yes
  rac4                                  yes
  Result: Check accessibility node from node 'rac3.

  
  Verify the equivalence of the user...

  Check: Equivalence of the user for the user 'oracle '.
  Comment by node name
  ------------------------------------  ------------------------
  RAC4 spent
  RAC3 spent
  Result: Use equivalence CONTROL passed to user 'oracle '.

  Verify node connectivity...

  Checking the configuration of the hosts file...
  Name of State comment node
  ------------  ------------------------  ------------------------
  RAC4 spent
  RAC3 spent

  The hosts config file verification successful

  
  Interface of the node information "rac4.
  Name address IP subnet gateway Gateway bat HW address MTU
  ------ --------------- --------------- --------------- --------------- ----------------- ------
  192.168.1.111 eth0 192.168.1.0 0.0.0.0 192.168.1.1 08:00:27:D7:DD:28 1500

  
  Interface of the node information "rac3.
  Name address IP subnet gateway Gateway bat HW address MTU
  ------ --------------- --------------- --------------- --------------- ----------------- ------
  192.168.1.101 eth0 192.168.1.0 0.0.0.0 192.168.1.1 08:00:27:12:7 C: 93 1500
  eth1 192.168.2.101 192.168.2.0 0.0.0.0 192.168.1.1 08:00:27:98:E0:86 1500

  
  Check: Subnet node connectivity "192.168.1.0.
  Source Destination connected?
  ------------------------------  ------------------------------  ----------------
  RAC4:eth0 rac3:eth0 Yes
  Result: Connectivity node passed to subnet "192.168.1.0" with one or more nodes rac4, rac3

  
  Check: The subnet "192.168.1.0" TCP connectivity
  Source Destination connected?
  ------------------------------  ------------------------------  ----------------
  RAC3:192.168.1.101 rac4:192.168.1.111 spent
  Result: Check of TCP connectivity spent for subnet "192.168.1.0.

  
  Check: Subnet node connectivity "192.168.2.0.
  Result: Connectivity node passed to subnet "192.168.2.0' with one or more nodes rac3

  
  Check: The subnet "192.168.2.0 TCP connectivity.
  Result: Check of TCP connectivity spent for subnet "192.168.2.0.

  
  The interfaces on the subnet "192.168.1.0" who are likely candidates for VIP are:
  eth0:192.168.1.111 RAC4
  RAC3 eth0:192.168.1.101

  CAUTION:
  Could not find an appropriate interface for the private interconnection range

  Result: Check connectivity node passed

  
  Check: Total memory
  Name of node available comment required
  ------------  ------------------------  ------------------------  ----------
  RAC4 1.98 GB (2075468,0 KB) increased from 1.5 GB (1572864,0 KB)
  RAC3 1.98 GB (2075468,0 KB) increased from 1.5 GB (1572864,0 KB)
  Result: The total past memory check

  Check: Available memory
  Name of node available comment required
  ------------  ------------------------  ------------------------  ----------
  RAC4 transmitted 1.87 GB (KB 1959736,0) 50 MB (51200,0 KB)
  RAC3 1.84 GB (1931904,0 KB) sent 50 MB (51200,0 KB)
  Result: Available past memory check

  Check: Swap space
  Name of node available comment required
  ------------  ------------------------  ------------------------  ----------
  RAC4 3.94 GB (4128760,0 KB) from 2.97 GB (3113202,0 KB)
  RAC3 3.94 GB (4128760,0 KB) from 2.97 GB (3113202,0 KB)
  Result: Check the Swap space past

  Check: Disk space for "rac4: / tmp '.
  Path of comment required node name Mount point available
  ----------------  ------------  ------------  ------------  ------------  ------------
  rac4/tmp / spent 11,49 GB 1 GB
  Result: Free past to check the disk space ' rac4: / tmp '.

  Check: Disk space for "rac3: / tmp '.
  Path of comment required node name Mount point available
  ----------------  ------------  ------------  ------------  ------------  ------------
  rac3/tmp / spent 16,66 GB 1 GB
  Result: Free past to check the disk space ' rac3: / tmp '.

  Check: Existence of user for 'oracle '.
  Name of State comment node
  ------------  ------------------------  ------------------------
  RAC4 are past
  RAC3 is past
  Result: Use CONTROL existence increased for 'oracle '.

  Check: Existence of group 'oinstall '.
  Name of State comment node
  ------------  ------------------------  ------------------------
  RAC4 are past
  RAC3 is past
  Result: Existence of group check passed for "oinstall".

  Check: Existence of group for "dba".
  Name of State comment node
  ------------  ------------------------  ------------------------
  RAC4 are past
  RAC3 is past
  Result: Existence of group check passed for "dba".

  Check: Members of the user 'oracle' in group 'oinstall' [primary]
  Name of node user is group is user in the main group comment
  ----------------  ------------  ------------  ------------  ------------  ------------
  Yes Yes Yes Yes past RAC4
  Yes Yes Yes Yes past RAC3
  Result: Membership check for user 'oracle' in group 'oinstall' [as Primary] past

  Check: Membership of the 'oracle' user group 'dba '.
  Name of node user is group is user in the comments group
  ----------------  ------------  ------------  ------------  ----------------
  Yes Yes Yes past RAC4
  RAC3 Yes Yes Yes past
  Result: Membership check for user 'oracle' in group 'dba' spent

  Tick: Run level
  Name of the node run level comment required
  ------------  ------------------------  ------------------------  ----------
  rac4          5                         3,5                       passed
  rac3          5                         3,5                       passed
  Result: Run control the level of the past

  Check: Hard limits for "file descriptors open maximum".
  Name of node Type available comment required
  ----------------  ------------  ------------  ------------  ----------------
  65536 65536 hard RAC4 spent
  65536 65536 hard RAC3 spent
  Result: Verification of limits hard to last for "maximum open file descriptors.

  Check: Limits Soft for "file descriptors open maximum".
  Name of node Type available comment required
  ----------------  ------------  ------------  ------------  ----------------
  1024 1024 soft RAC4 spent
  1024 1024 soft RAC3 spent
  Result: Soft limits check passed for "file descriptors open maximum".

  Check: Hard limits for "maximum user processes.
  Name of node Type available comment required
  ----------------  ------------  ------------  ------------  ----------------
  16384 16384 hard RAC4 spent
  16384 16384 hard RAC3 spent
  Result: Verification of limits hard to last for "maximum user process.

  Check: Limits Soft for "maximum user process.
  Name of node Type available comment required
  ----------------  ------------  ------------  ------------  ----------------
  2047 2047 soft RAC4 spent
  2047 2047 soft RAC3 spent
  Result: Soft limits check passed for "maximum user process.

  Control: System Architecture
  Name of node available comment required
  ------------  ------------------------  ------------------------  ----------
  I686, x 86 RAC4 spent
  RAC3 i686 x 86 spent
  Result: Verification of the system architecture past

  Control: Kernel Version
  Name of node available comment required
  ------------  ------------------------  ------------------------  ----------
  RAC4 2.6.18 - 2.6.18 194.el5 spent
  RAC3 2.6.18 - 2.6.18 194.el5 spent
  Result: Last kernel version control

  Check: Parameter of kernel for 'semmsl.
  Name of the configured node comment required
  ------------  ------------------------  ------------------------  ----------
  RAC4 250 250 spent
  RAC3 250 250 spent
  Result: Check of kernel parameter passed to "semmsl.

  Check: Parameter of kernel for 'semmns.
  Name of the configured node comment required
  ------------  ------------------------  ------------------------  ----------
  RAC4 32000 32000 spent
  RAC3 32000 32000 spent
  Result: Check kernel parameter passed to "semmns.

  Check: Parameter of kernel for 'semopm.
  Name of the configured node comment required
  ------------  ------------------------  ------------------------  ----------
  RAC4 100 100 spent
  RAC3 100 100 spent
  Result: Check kernel parameter passed to "semopm.

  Check: Parameter of kernel for 'semmni.
  Name of the configured node comment required
  ------------  ------------------------  ------------------------  ----------
  RAC4 128 128 spent
  RAC3 128 128 spent
  Result: Check of kernel parameter passed to "semmni.

  Check: "Package" kernel parameter
  Name of the configured node comment required
  ------------  ------------------------  ------------------------  ----------
  RAC4 536870912 1054504960 spent
  RAC3 536870912 1054504960 spent
  Result: Check of kernel parameter passed to 'package '.

  Check: Parameter of kernel for "shmmni(5)."
  Name of the configured node comment required
  ------------  ------------------------  ------------------------  ----------
  RAC4 4096 4096 spent
  RAC3 4096 4096 spent
  Result: Check of kernel parameter passed to 'shmmni(5) '.

  Check: "Shmall" kernel parameter
  Name of the configured node comment required
  ------------  ------------------------  ------------------------  ----------
  RAC4 2097152 2097152 spent
  RAC3 2097152 2097152 spent
  Result: Check kernel parameter passed to "shmall.

  Check: Parameter of kernel "file-max.
  Name of the configured node comment required
  ------------  ------------------------  ------------------------  ----------
  RAC4 6815744 6815744 spent
  RAC3 6815744 6815744 spent
  Result: Check of kernel parameter passed to 'file-max.

  Check: "Ip_local_port_range" kernel parameter
  Name of the configured node comment required
  ------------  ------------------------  ------------------------  ----------
  Between 9000 & 65500 RAC4 between 9000 & 65500 past
  Between 9000 & 65500 RAC3 between 9000 & 65500 past
  Result: Check of kernel parameter passed to «ip_local_port_range»

  Check: Parameter of kernel for "rmem_default."
  Name of the configured node comment required
  ------------  ------------------------  ------------------------  ----------
  RAC4 262144 262144 spent
  RAC3 262144 262144 spent
  Result: Check of kernel parameter passed to 'rmem_default '.

  Check: "Rmem_max" kernel parameter
  Name of the configured node comment required
  ------------  ------------------------  ------------------------  ----------
  RAC4 4194304 4194304 spent
  RAC3 4194304 4194304 spent
  Result: Check of kernel parameter passed to «rmem_max»

  Check: Parameter of kernel for "wmem_default."
  Name of the configured node comment required
  ------------  ------------------------  ------------------------  ----------
  RAC4 262144 262144 spent
  RAC3 262144 262144 spent
  Result: Check of kernel parameter passed to 'wmem_default '.

  Check: "Wmem_max" kernel parameter
  Name of the configured node comment required
  ------------  ------------------------  ------------------------  ----------
  RAC4 1048576 1048586 spent
  RAC3 1048576 1048586 spent
  Result: Check kernel parameter passed to "wmem_max.

  Check: Parameter of kernel for "aio-max-nr.
  Name of the configured node comment required
  ------------  ------------------------  ------------------------  ----------
  RAC4 1048576 1048576 spent
  RAC3 1048576 1048576 spent
  Result: Check of kernel parameter passed to "aio-max-nr.

  Check: Existence of package for "make - 3.81.
  Name of node available comment required
  ------------  ------------------------  ------------------------  ----------
  Make RAC4 make - 3.81 - 3.el5 - 3.81 spent
  RAC3 make - 3.81 - 3.el5 make - 3.81 spent
  Result: Package of verification of the past existence to 'make - 3.81.

  Check: Existence of package for ' binutils - 2.17.50.0.6.
  Name of node available comment required
  ------------  ------------------------  ------------------------  ----------
  binutils - 2.17.50.0.6 - 14.el5 binutils - 2.17.50.0.6 spent RAC4
  binutils - 2.17.50.0.6 - 14.el5 binutils - 2.17.50.0.6 spent RAC3
  Result: Package of verification of the past for existence ' binutils - 2.17.50.0.6.

  Check: Existence of package for "gcc - 4.1.2.
  Name of node available comment required
  ------------  ------------------------  ------------------------  ----------
  4.1.2 - gcc - 48.el5 gcc - 4.1.2 spent RAC4
  4.1.2 - gcc - 48.el5 gcc - 4.1.2 spent RAC3
  Result: Package of verification of the past for existence ' gcc - 4.1.2.

  Check: Package of existence ' gcc - c++ - 4.1.2.
  Name of node available comment required
  ------------  ------------------------  ------------------------  ----------
  RAC4 CCG - c++ - 4.1.2 - 48.el5 gcc - c++ - 4.1.2 spent
  RAC3 CCG - c++ - 4.1.2 - 48.el5 gcc - c++ - 4.1.2 spent
  Result: Package of verification of the past for existence ' gcc - c++ - 4.1.2.

  Check: Existence of package for "libgomp - 4.1.2.
  Name of node available comment required
  ------------  ------------------------  ------------------------  ----------
  RAC4 4.4.0 - libgomp - libgomp - 4.1.2 spent 6.el5
  RAC3 4.4.0 - libgomp - libgomp - 4.1.2 spent 6.el5
  Result: Package of verification of the past for existence "libgomp - 4.1.2.

  Check: Existence of package for "libaio - 0.3.106.
  Name of node available comment required
  ------------  ------------------------  ------------------------  ----------
  from RAC4 libaio - 0.3.106 - 5 libaio - 0.3.106
  from RAC3 libaio - 0.3.106 - 5 libaio - 0.3.106
  Result: Package of verification of the past for existence "libaio - 0.3.106.

  Check: Existence of package "24 / 2.5 / glibc.
  Name of node available comment required
  ------------  ------------------------  ------------------------  ----------
  past RAC4 glibc - 2.5 - 49 glibc-2, 5-24
  past of RAC3 glibc - 2.5 - 49 glibc-2, 5-24
  Result: Package check existence for "glibc-2, 5-24.

  Check: Package of existence "compat-libstdc ++ - 33 - 3.2.3.
  Name of node available comment required
  ------------  ------------------------  ------------------------  ----------
  RAC4 compat-libstdc ++-33 - 3.2.3 - 61 compat-libstdc ++-33 - 3.2.3 spent
  RAC3 compat-libstdc ++-33 - 3.2.3 - 61 compat-libstdc ++-33 - 3.2.3 spent
  Result: Package of checking for "compat-libstdc ++ - 33 - 3.2.3.

  Check: Existence of package for "elfutils-libelf-0, 125.
  Name of node available comment required
  ------------  ------------------------  ------------------------  ----------
  RAC4 elfutils-libelf-0, 137 - 3.el5 elfutils-libelf-0, 125 past
  RAC3 elfutils-libelf-0, 137 - 3.el5 elfutils-libelf-0, 125 past
  Result: Package of verification of the past for existence "elfutils-libelf-0, 125.

  Check: Existence of package for "elfutils-libelf-devel-0, 125.
  Name of node available comment required
  ------------  ------------------------  ------------------------  ----------
  RAC4 elfutils-libelf-devel-0, 137 - 3.el5 elfutils-libelf-devel-0, 125 past
  RAC3 elfutils-libelf-devel-0, 137 - 3.el5 elfutils-libelf-devel-0, 125 past
  Result: Package of verification of the past for existence "elfutils-libelf-devel-0, 125.

  Check: Existence of package for ' glibc-common - 2.5.
  Name of node available comment required
  ------------  ------------------------  ------------------------  ----------
  from RAC4 glibc-common - 2.5 - 49 glibc-common - 2.5
  from RAC3 glibc-common - 2.5 - 49 glibc-common - 2.5
  Result: Package of verification of the past for existence ' glibc-common - 2.5.

  Check: Existence of package for ' glibc-devel - 2.5.
  Name of node available comment required
  ------------  ------------------------  ------------------------  ----------
  from RAC4 glibc-devel - 2.5 - 49 glibc-devel - 2.5
  from RAC3 glibc-devel - 2.5 - 49 glibc-devel - 2.5
  Result: Package of verification of the past for existence ' glibc-devel - 2.5.

  Check: Existence of package for ' glibc-headers - 2.5.
  Name of node available comment required
  ------------  ------------------------  ------------------------  ----------
  from RAC4 headers glibc - 2.5 - 49 glibc-headers - 2.5
  from RAC3 headers glibc - 2.5 - 49 glibc-headers - 2.5
  Result: Package of verification of the past for existence ' glibc-headers - 2.5.

  Check: Existence of package for "libaio-devel - 0.3.106.
  Name of node available comment required
  ------------  ------------------------  ------------------------  ----------
  from RAC4 libaio-devel - 0.3.106 - 5 libaio-devel - 0.3.106
  from RAC3 libaio-devel - 0.3.106 - 5 libaio-devel - 0.3.106
  Result: Package of verification of the past for existence "libaio-devel - 0.3.106.

  Check: Existence of package for "4.1.2 - libgcc '.
  Name of node available comment required
  ------------  ------------------------  ------------------------  ----------
  4.1.2 - libgcc - 48.el5 libgcc - 4.1.2 spent RAC4
  4.1.2 - libgcc - 48.el5 libgcc - 4.1.2 spent RAC3
  Result: Package of verification of the past for existence ' libgcc - 4.1.2.

  Check: Package of existence ' libstdc ++-4.1.2.
  Name of node available comment required
  ------------  ------------------------  ------------------------  ----------
  RAC4 libstdc ++ - 4.1.2 - 48.el5 libstdc ++-4.1.2 spent
  RAC3 libstdc ++ - 4.1.2 - 48.el5 libstdc ++-4.1.2 spent
  Result: Package of verification of the past for existence ' libstdc ++-4.1.2.

  Check: Package of existence ' libstdc ++ - devel - 4.1.2.
  Name of node available comment required
  ------------  ------------------------  ------------------------  ----------
  RAC4 libstdc ++ - devel - 4.1.2 - 48.el5 libstdc ++ - devel - 4.1.2 spent
  RAC3 libstdc ++ - devel - 4.1.2 - 48.el5 libstdc ++ - devel - 4.1.2 spent
  Result: Package of verification of the past for existence ' libstdc ++ - devel - 4.1.2.

  Check: Existence of package for "sysstat - 7.0.2.
  Name of node available comment required
  ------------  ------------------------  ------------------------  ----------
  from RAC4 sysstat - 7.0.2 - 3.el5 sysstat - 7.0.2
  from RAC3 sysstat - 7.0.2 - 3.el5 sysstat - 7.0.2
  Result: Package of checking for "sysstat - 7.0.2.

  Check: Existence of package for "unixODBC - 2.2.11.
  Name of node available comment required
  ------------  ------------------------  ------------------------  ----------
  RAC4 unixODBC - 2.2.11 - unixODBC - 2.2.11 spent 7.1
  RAC3 unixODBC - 2.2.11 - unixODBC - 2.2.11 spent 7.1
  Result: Package of verification of the past for existence "unixODBC - 2.2.11.

  Check: Existence of package for "unixODBC-devel - 2.2.11.
  Name of node available comment required
  ------------  ------------------------  ------------------------  ----------
  RAC4, unixODBC unixODBC-devel-2.2.11-7.1-devel-2.2.11 spent
  RAC3, unixODBC unixODBC-devel-2.2.11-7.1-devel-2.2.11 spent
  Result: Package of verification of the past for existence "unixODBC-devel - 2.2.11.

  Check: Existence of package for 'ksh-20060214.
  Name of node available comment required
  ------------  ------------------------  ------------------------  ----------
  from RAC4, ksh ksh-20100202 - 1.el5 - 20060214
  from RAC3, ksh ksh-20100202 - 1.el5 - 20060214
  Result: Package of checking for "ksh-20060214"

  Check for multiple users with the value of the UID 0
  Result: Check for multiple users with the value of the UID 0 past

  Check: The current group ID
  Result: Control of current past group ID
  Base file name consistency check model...
  Check the consistency of spent Core file name pattern.

  Check to make sure that the 'oracle' user is not in group "root".
  Name of State comment node
  ------------  ------------------------  ------------------------
  RAC4 are not past
  RAC3 is not past
  Result: The user 'oracle' is no not part of the group 'root '. Check the past

  Audit default user file creation mask
  Name of node available comment required
  ------------  ------------------------  ------------------------  ----------
  RAC4 0022 0022 spent
  RAC3 0022 0022 spent
  Result: Mask by default user file creation passed Verification

  Starting synchronization check by using the Network Time Protocol (NTP)...

  Of NTP Configuration file check has started...
  File configuration network time Protocol (NTP) could not be found on one of the nodes. Oracle Cluster time
  Synchronization service (CTSS) may be used instead of NTP to synchronize the time on the cluster
  nodes

  Result: Control of synchronization using Network Time Protocol (NTP) spent

  
  Check beforehand for cluster services Setup was successful.

  ===============================================================================================================================================================

  Kind regards

  user10341747 wrote:

  Hello pradeep,.

  [oracle@rac3 grid] $ cat/etc/hosts
  # Do not remove the next line, or various programs
  # requiring a network functionality will fail.
  127.0.0.1 localhost.localdomain localhost

  # Public

  192.168.1.101 rac3 rac3.localdomain

  192.168.1.111 rac4 rac4.localdomain

  # Private

  192.168.2.101 priv.localdomain - rac3 rac3-priv

  192.168.2.111 priv.localdomain - rac4 rac4-priv

  # Virtual

  192.168.2.113 vip.localdomain - rac3 rac3-vip

  192.168.2.114 vip.localdomain - rac4 rac4-vip

  # SCAN

  192.168.2.201 rac - scan.localdomain rac-scan
  [oracle@rac3 grid] $

  You have a problem with IP addresses:

  Use * 192.168.2 for private, virtual, and scan?

  Public, virtual and SCAN IPs must be the same private network is must be different.

  He warns here, out of cluvfy:

  The interfaces on the subnet "192.168.1.0" who are likely candidates for VIP are:
  eth0:192.168.1.111 RAC4
  RAC3 eth0:192.168.1.101

  CAUTION:
  Could not find an appropriate interface for the private interconnection range

  Result: Check connectivity node passed

  You can change as below

  # Public

  192.168.1.101 rac3 rac3.localdomain

  192.168.1.111 rac4 rac4.localdomain

  # Private

  192.168.2.101 priv.localdomain - rac3 rac3-priv

  192.168.2.111 priv.localdomain - rac4 rac4-priv

  # Virtual

  192.168.1.113 vip.localdomain - rac3 rac3-vip

  192.168.1.114 vip.localdomain - rac4 rac4-vip

  # SCAN

  192.168.1.201 rac - rac-scan scan.localdomain

  Concerning

  Mr. Mahir Quluzade

  http://www.Mahir-quluzade.com

• Drive DVD-ROM 37 error message Code in the Device Manager on Satellite M30

  Hello

  I'm new to this forum and I wonder if anyone can help? I have a Satellite installed 30-106 M which has the above CD. At present, it does not work when I go to Device Manager, the error massage that I have is that follow 'Windows cannot initialize the device of this hardware driver. (Code 37) ».

  Can someone offer me some advice please.
  Thank you
  Trevor

  Hello

  I studied in the Microsoft Knowledge base, and it seems that this error is displayed because the driver returned error in her routine to the driver entry.
  I think that you need to uninstall the driver, and then click find the hardware changes to reinstall or upgrade the driver.

  You can do it in Device Manager. Otherwise, you can remove the drive in the Device Manager list and after restart of the new mobile operating system should recognize the drive again.
  After this procedure, you should test the device if it will work.

• error-89129 ' Terminal for the device is the invalid Destination device: Dev4 Ctr6Out Terminal.

  Hello!

  The problem apears when I try to generate a signal of 200 samples to 2MH on a single digital line with a PCI-6534

  When I try to create the channel nStatus = DAQmxCreateDOChan (m_taskHandle, "/ Dev5/port0 / line0:7", "", DAQmx_Val_ChanPerLine);

  I have the 89129 error with the following message:

  "Terminal of this deviece is not valid.

  Target unit: Dev4

  "Terminal: Ctr6Out.

  I also installed in the system the other 2 boards OR: 6602-PCI and PCI-6035

  Before to get this error, I do also some BESTUFS with 6534, but with a channel of 16 lines, configured like this nStatus = DAQmxCreateDOChan (m_taskHandle, "/ Dev5/port0_16", "", DAQmx_Val_ChanForAllLines); and I don't get any errors.

  Hello

  Please post on the Forums OR! Have you tried to use a panel of test able and Automation Explorer? You will see the listed 6534 peripheral slot and Interfaces. By right-clicking on the device, you can access the test panels. This allows to test the functionality of the code. In addition, if you have LabVIEW available, try to create the channel in LabVIEW and see if you get the same results. Please post back the result of these suggestions. I hope this helps!

• How to create the generation that run on the device.

  I created a simple application. Now, I want to test this feature and I want to just put the build in Sd Card. So how can I make the executable file for the device. that run in the BlackBerry device.

  Thanks in advance.

  Yes

• Unable to connect to the wireless network, Windows error cannot communicate with the device or the reaource (primary DNS server)

  Original title: internet connection problem

  Hey,.

  I use a wireless connection at home, it works very well in my android and apple gadget, but it does not work for my laptop. It is said:

  1. Windows cannot communicate with the device or the reaource (primary DNS server)

  2. the connection between the Internet and your access point, router or cable modem is broken

  3 problem with access point or wireless adapter

  I think it's an effects of virus or something?  Because yesterday it works really well. How can I fix? Thank you very much

  Hello Hildegard Lydia,

  You may experience this problem for a number of reasons. Some common problems that can cause these problems are: drivers damaged or incompatible, updates missing, network connection settings, hardware problems or software or TCP/IP can sometimes be damaged or corrupted.

  What is the brand and model of your computer?

  Please follow the steps mentioned below:

  Method 1: a component of the Internet connection on your computer is a package of instructions called TCP/IP. TCP/IP can sometimes become damaged or altered. If you can't connect to the Internet and you have tried all other methods to solve the problem, TCP/IP can be causing it.
  I suggest you try to reset the TCP/IP stack.
  http://support.Microsoft.com/kb/299357

  Method 2:

  I suggest that you refer to the following link:

  Why can't I find a wireless network?

  http://Windows.Microsoft.com/en-CA/Windows/cant-find-wireless-network#1TC=Windows-7

  Method 3:

  See the steps in the following link and check:

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-CA/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Please an update on the status of the issue to help you further.

• Getting error: cannot run on the development web server configured

  I installed Visual studio 2012 and IIS 7 on Windows 7 Ultimate version. I get the error message 'Cannot run on the development Web server configured' and 'Impossible to run IIS Express' when I tried to run a web application from VS2012. If anyone knows how to fix it please tell me.

  Hello

  It is not a community forum for VS.

  Try the Visual Studio Forums

  Visual Studio development category:
  http://social.msdn.Microsoft.com/forums/en-us/category/VisualStudio

  Don

• Error "0 x 80070141 the device is unreachable" as it tried to download phone photos.

  I am trying to download pictures from phone. I keep getting error code 0 x 80070141 the device is inaccessible. Please help me solve this problem! Thank you!

  I'm having the same error to connect to a Samsung Note 8.0 using Windows 8.1 via a USB cable. It works for a few minutes, but stops and Windows displays the error message "inaccessible device."

  While accessing metadata using Calibre, I noticed that the device has become inaccessible, when a very long path/file name was encountered.

  I've shortened the name of the directory and the name of the file which seems to be the cause of the problem and this has solved the problem.

• CreateChild simple script returns an undefined error but runs in the console?

  Hello

  Well, I'm really a newbie... I have read many threads made a lot of research and no matter what I cannot do the following to run correctly in the js file. Even if the code is running in the console...

  / * Bookmark * /.

  var myRoot = this.bookmarkRoot;

  function createBookMark()

  {

  myRoot.createChild ("test", 0);

  }

  app.addToolButton({)

  cName: 'Add bookmark Test', the name of //Button

  cExec: "createBookMark()", call //Function

  cLabel: "Bookmark test", //The text on the button

  cTooltext: "Create bookmark test" //Help text

  });

  Error:

  myRoot is undefined

  25:app:exec

  TypeError: myRoot is not defined

  25:app:exec

  In the console:

  var myRoot = this.bookmarkRoot;

  myRoot.createChild ("test", 0);

  code runs without error.

  What I am doing wrong?

  You must pass myRoot as a parameter to the function. If the function

  header must be:

  function createBookMark (myRoot) {}

  And the call to the function should pass this variable, as follows:

  cExec: "createBookMark (this.bookmarkRoot).

  You need to remove the first line of code (the myRoot statement

  outside of the function). There is no point in the code.

• Is there any tool to see consumption of memory for a project running on the device

  Hi is there any tool I can install or use with SDK native to see the memory consumption during execution on the device of my project? Thank you.

  Sure. You need to open the System QNX perspective information (window > Open Perspective > QNX system Perspective). From there, you should be able to view the memory usage of your application via the tabs System summary, the memory information and the Information of Malloc .

• Error ""cannot connect to the device", Viewer images/key chain brookstone.

  * - Original title - brookstone Keychain photo viewer

  I am using windows 7 I have the installation disc for my photo viewer when I open the program I get a box that says "unable to connect to the device?  Help!

  Hello

  How do you connect the Keyring image viewer?

  A)-tips to troubleshoot USB devices: http://windows.microsoft.com/en-us/windows-vista/Tips-for-solving-problems-with-USB-devices

  (This applies also to Win 7).

  B)-install a USB device: http://windows.microsoft.com/en-us/windows7/Install-a-USB-device

  I hope this helps.