Check if all pixels are black

Similar Questions

• NSS4100 RAID DOES NOT START, please check that all components are present

  Hi, NSS4100 storage system could start the raid10.

  The message is:

  --

  The RAID boot failure
  Please check that all components are present

  --

  All disks are present, as you can see in the picture as an attachment. The system has been restarted twice. Is there a possibility to start the raid without losing data?

  Thank you, Dan

  There number so that you can configure for RAID Array (JBOD, RAID0, RAID1, RAID5, RAID5 + Spare and RAID10). I read your posted, the system configured for RAID10. RAID10 is operated like a pair of mirror of data.

  Here are a few RAID array information:

  (1) JBOD (no data protection, when your drive is bad.) You have lost all the data). The notion of read/write date is the same for PC. Fast at the beginning, but the data you have on the disk, it will eventually slow down.)

  (2) RAID0 (no data protection, however, to write the disk data is better in performance. A drive is dead, then the data is lost)

  (3) RAID1 (data protection. A drive is dead. Others always in activity and degrades performance.)

  (4) RAID1 + Spare (Similarly for RAID1, just an automatic rebuild RAID1 for when a drive broke down)

  (5) RAID5: (Protection of data. Minimum of 3 disks. Authorized a disc goes down)

  (6) RAID5 + Spare: (data protection. Need 4 drives. Auto regeneration when a faulty drive)

  (7) RAID10: (Protection of data. Working together with the disc into the slot 1/2 is first pair and disks in the 3/4 Groove is the second pair). This is important because the disks in the Groove 1/2 cannot be placed on the slot 3/4 if she already had the information RAID10. Error I've seen since the GUI is like to drive may have been moved or exchanged around unintended.

• Check if all tasks are running against a virtual machine in vCenter?

  I need to write some powercli to see if a virtual machine is being switched, vmotioned or possibly another operation.  How can I check if a task is running on the VM specified in vCenter?

  I know how to get the tasks running in vCenter:

  $task = get-task-status Running

  But how to determine what the target is tasks?

  Try something like this

  Get-job | where {$_.} {ObjectId-match ' ^ VirtualMachine'} |

  Select StartTime,State,@{N='VM'; E = {Get-View-Id $_.} ObjectId-the property name. {{Select - ExpandProperty name}}, Description

• Check if all the instances of a field in a table are empty?

  I'm having a problem with the control if all instances of a field in a table are empty. If one is empty I need a message box appears. There is a header line and a line of body with several text fields. The line of the body is set to repeat itself and there are buttons to add and remove lines of the body.

  I had success by checking if all fields are blank in the original line by using the following code:

  if ((this.resolveNode("Page1.Table1.Row3.TextField1").rawValue == null | )) this.resolveNode("Page1.Table1.Row3.TextField1").rawValue == "") || (this.resolveNode("Page1.Table1.Row3.TextField2").rawValue == null | ) this.resolveNode("Page1.Table1.Row3.TextField2").rawValue == "") || (this.resolveNode("Page1.Table1.Row3.TextField3").rawValue == null | ) this.resolveNode("Page1.Table1.Row3.TextField3").rawValue == "") || (this.resolveNode("Page1.Table1.Row3.TextField4").rawValue == null | ) this.resolveNode("Page1.Table1.Row3.TextField4").rawValue == ""))

  {xfa.host.messageBox ("Please complete the table of assessment/implementation." )} , 'Incomplete form' , 1);}

  I guess that in all cases be verified that I have to use the 'resolveNodes' function but I could not make it work. That's what I tried:

  if (( == this.resolveNodes("Page1.Table1.Row3.TextField1").rawValue null | )) this.resolveNodes("Page1.Table1.Row3.TextField1").rawValue == "") || .........)

  Although it works not since .rawValue isn't a function that work with resolveNodes (only resolveNode).

  Should what code I use for this?

  Thanks in advance for any advice.

  Hello

  To be able to check each field in a multiple instances of a table line, you must specify which line you are trying to access to...

  To do this, you must specify the index of the row, this way you can treat each rows in a loop and access each field within this line

  Instead of using resolveNodes, I suggest you use resolveNode... and it should look like this:

  for (var i = 0; i)< page1.table1._row3.count;="">

  If (this.resolveNode ("Page1.Table1.Row3 [" + I.ToString + "]").) TextField1.rawValue == null | this.resolveNode ("Page1.Table1.Row3 [" + I.ToString + "]"). TextField2.rawValue | .......) {

  xfa.host.messageBox ("Please complete the table of assessment/implementation.", "incomplete form", 1);

  break;

  }

  }

  I hope this helps!

• all options are at maximum volume, but I can barely hear computer speakers, the modules are very well.

  Used for acceptable sound from computer speakers, now I can barely tell if someone speaks. Plug-ins and headphones work fine. I checked that all orders are at maximum volume, no help. Any suggestions?

  Hello

  1. were all changes to the system before the show?

  2. deal with the issue with applications or specific?

  3. the speaker works fine on other computers?

  Try the next step and check if that helps.

  Click on the below link to get the procedure run the audio troubleshooter for fox common audio problems.

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

  Hope the helps of information.

• I installed the trial version of LR6. In developer mode, all the pictures are black with some coloured points/line, as a kind of negative

  I installed the trial version of LR6. In developer mode, all the pictures are black with coloured points/line, as a kind of negative. I deleted lR6 and installed again but no change. Who has an advisor?

  Try to disable the GPU under Edit > Preferences > performance. (Lightroom > Preferences on Mac)

  Uncheck the box use Graphics Processor.

• One of the pages of my site moves to the right when using anchors to scroll. I checked for Ghost off the page boxes and checked that all my 100% width images are actually 100%. I discovered that this problem is in Chrome and do not hap

  One of the pages of my site moves to the right when using anchors to scroll. I checked for Ghost off the page boxes and checked that all my 100% width images are actually 100%. I discovered that this problem is chrome and does not happen in Firefox. Any suggestions?

  Thank you Brad, my ankles were lined up however they were in the Center. I am proposing to-100 and it solved the problem. Thanks for your help.

• How do you dynamically check if all child members are missing?

  Hi all

  How do you dynamically check if all child members are missing?

  for example the threshold does not work because you cannot directly use member sets in an IF statement.

  IF ((@CHILDREN ("Profit") == #MISSING))

  If I list explicitly all the children in the IF statement, it will work, but there is a lot of hard code.

  Thanks in advance.

  Darren

  I'm sure that (I have not tested) who...

  @SUM (@CHILDREN ('profit'))

  .. work - @SUM will commandeer a member set.  And as the sum of a set will be #Missing if all the members of the set are also #Missing that is the desired result.

  Quite frequently, the size of accounts will be dynamic at all higher levels, which means that you could just test 'Profit', but I guess that is not the case here.

• How to check the table have are all views in oracle

  Hello
  How to check the table have are all views in oracle

  SELECT * FROM user_dependencies
  WHERE type='VIEW'
  AND referenced_type='TABLE'
  AND referenced_name ='Your_Table_Name' 
  

  You can use dba_dependencies to find views in the different schema.

• My toolbar disappeared completely. I still have the back arrows on the far left, but everything else is just... gone. I tried Firefox to stop and restart several times, but nothing does not change. All toolbars are checked in the view menu.

  July 13, 2010: My Firefox toolbar has suddenly disappeared, except for the back arrows on the left side. I tried Firefox stop and start several times, but nothing has changed. All toolbars are selected in the view menu... but nothing is visible!

  See the Navigation buttons such as back, home, bookmarks and recharge are missing

• All my plugins keep crashing after I tried to use them. The two most important, I really want to work are silverlight and adobe flash player, but for some reason, Firefox 9.0.1 crash them. All plugins are updated

  All plugins are updated. This has only started happening recently. Plugins seems to start for a few seconds (not more than 5) and then crash. Chances are that there is more than a problem with Silverlight and Flash, but they are the only two I use really.

  Follow the suggestions mentioned in the following articles:

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox
  • Solve problems with plugins like Flash or Java to solve the common problems of Firefox
  • Clear the Cache and Cookies

  Check and tell if its working.

• Re: I have to restart the U400 Satellite to make sure that all parameters are correctly

  First of all, I started my new U400.
  However, after recording of Windows and Toshiba Quarantee, (toshiba message) system keeps showing a warning/info after every time that I reboot I should reboot again to check if all the settings are installed corectly.

  Help, please!

  Hmm it s a little strange for me.
  But I guess there is a starting tool always when the computer starts.

  Go to RUN and access the command msconfig.
  There, you can check what applications start at the beginning.

  Then deselect (deactivate) the process that could cause this message and reboot the laptop.

• Groups of contacts: not all recipients are in the mail

  Until recently, I've only used my laptop for music and photos, and I'm a new user for mail and contacts.

  I created a group with several contacts. When I want to use it to send an email, however, is only a fraction of the list (the one with a 6 and another with 18) as recipients of mail. I made sure all the contacts have a valid mail.

  All solutions?

  Thank you

  P

  Hello Freesias,

  Thank you for using communities Support from Apple!

  If I understand your question only when addressing a group email, only some of the contact group is filling by e-mail while others do not.

  Also, you did a good job by checking that all the contacts have a valid email address. In this situation, I would recommend controls the placement of the e-mail address in Contacts. It may be possible that the e-mail address is not entered in a field of e-mail, but rather a field phone for example.

  The following link includes an image that shows three different phone numbers to contact Jeanne Fox with a fourth field below that has the word 'phone' is gray letters. This indicates that this field is used for a telephone number.

  Under this field phone, you see a gray solid line. This line separates the space to add phone numbers and email addresses. As you can see from the picture, the first field is followed [email protected] of another empty field that has the gray word "Email".

  

  Change contact information - Contacts help

  To resolve your situation, I suggest after the steps in the following article to see if my theory may be correct.

  1. Select a contact, then click on change

  2. Add a field: click on the Add button, then choose send

  3. a new e-mail field must open in the domain of the Email I mentioned earlier

  If the new Email field opens to another area that is the current e-mail address, type the e-mail address of the contact in this new field, and then delete if on the ground, he was already in.

  If the new Email field opens in the same area, between the two solid gray lines, please let us know.

  See you soon!

• Canon MG5200 printer prints all colors except black in pink. So I can get black and pink print

  My printer is all colors except black in pink.  So I can get black and pink print

  Hello

  As Canon OEM is responsible for the good operation of the printer and their
  drivers provided. Check with Canon support, their books online and
  drivers and ask in their forums (if any).

  Canon - Support and drivers
  http://www.USA.Canon.com/Cusa/support/consumer

  Canon - Support - contact us
  http://www.USA.Canon.com/Cusa/consumer/standard_display/contact_us_consumer

  Canon - Windows - Vista and Windows 7 support
  http://www.USA.Canon.com/Cusa/consumer/products?pageKeyCode=windowsSupport

  Canon printer - page local confirmation - could be from another region.
  http://pdisp01.c-WSS.com/OS/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Some of the files in my files are blue and others are black. What does that mean?

  original title: list of folders

  When I view any folder, some elements are in BLUE , and some are Black. All of a sudden, it started a few days ago. Whats up with that?

  Refer to this article on the files, and compressed files:

  "How to use file Compression in Windows XP"
    <>http://support.Microsoft.com/kb/307987 >

  HTH,
  JW