Check-in format JPG - CS5 default, PSD, unfolded even when

Similar Questions

• How to convert .mix files usable format (.jpg)

  How to convert files *.mix usable format (*.jpg) My *.mix files that were created by MS Picture it! and MS Digital Image Pro. Help, please!

  How to convert files *.mix usable format (*.jpg)  Went to Windows 7 & XP new computerfrom due to a failure of the computer.  Fotrunately my pictures have been saved, but the window in course (or other) photo products can not access my files *.mix created by MS Picture! and MS Digital Image Pro.  Help, please!

  Hi Genecec,

  There is no converter of Microsoft or the viewer that will help you to see old photos of your. Although you can use some third party software to convert the .mix .jpg files.

  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  You can follow the link given below and check if the given suggestion is useful.

  http://social.answers.Microsoft.com/forums/en-us/wlmedia/thread/12e62153-35b2-40F0-8da4-ae6450e085b0

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I'm trying to burn images in format .jpg on a cd or a dvd in my dvd player. burn files on the disk, but will not work in drive

  I'm trying to burn images in format .jpg on a cd or a dvd in my dvd player.  The files to burn to the disc but won't play in dvd player

  It is possible that your DVD Player cannot read the format. Have you tried Windows DVD Maker? The application must be able to encode the DVD properly in order to perform almost any DVD player worldwide. Thanks, Callum Kerr.

  My software site
  Xbox Live Gamertag: callum151000

• just bought a new EOS 7 d mk2 camera but can't open the CR2 raw files in Photoshop CS5. I downloaded the new raw converter for the camera which is the DNG 8.7 format for my windows computer operated. When I click on a CR2 file I get a subventio

  I just bought a new EOS 7 d mk2 camera but can't open the CR2 raw files in Photoshop CS5. I downloaded the new raw converter for the camera which is the DNG 8.7 format for my windows computer operated. When I click on a CR2 file I get a notification to come as States "could not complete your request because the file appears to be a model of camera that is not supported by the installed version of camera raw.

  I'm entered in Photoshop and loaded the dates above, but have met 3 mistakes when you do this (1) Adobe Bridge CS5 4.0.5 (2) Adobe extension Manager SC5 5.0 update (3) 12.0.4 for Photoshop CS5 Photoshop

  I tried for 2 days now to try to get the operating system for your support/help will be most appreciated.

  My old camar is an EOS20 D and I have no problem with CR2 files it produce

  Hi rodaks, george

  Images II 7 d would be directly supported in Photoshop CS5 as requiring a new camera raw.

  So, you must download the free DNG Converter to convert these images to DNG and then open the DNG converted in Photoshop.

  See this link for download DNG Converter 9.0:

  For Mac: Adobe - Adobe Camera Raw and DNG Converter: for Macintosh: Adobe DNG Converter 9.0: thanks

  For Windows: Adobe - Adobe Camera Raw and DNG Converter: for Windows: Adobe DNG Converter 9.0: thanks

• AUTOBACKUP don't format not in default

  Version of the database is 11.2.0.2.0
  Looking at the path of my automatic backup control files, they are not in the documented format:
  c DBID-YYYYMMDD-QQ
  Here's my RMAN display all orders:
  RMAN > show all.
  
  using the control file of the target instead of recovery catalog database
  RMAN settings for database with db_unique_name DEVDB are:
  CONFIGURE REDUNDANCY 1 RETENTION STRATEGY; # by default
  CONFIGURE BACKUP OPTIMIZATION # by default
  SET UP DEFAULT DISK DEVICE TYPE; # by default
  CONFIGURE CONTROLFILE AUTOBACKUP ON;
  CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO "%F" # by default
  SET UP THE DEVICE TYPE DISK PARALLELISM 1 BACKUP BACKUPSET TYPE; # by default
  CONFIGURE BACKUP OF DATA TO DISK FILE TYPE DEVICE TO 1; # by default
  CONFIGURE BACKUP ARCHIVELOG FOR DEVICE TYPE DISK TO 1; # by default
  CONFIGURE MAXSETSIZE TO UNLIMITED; # by default
  CONFIGURE ENCRYPTION OF DATABASE # by default
  CONFIGURE THE ENCRYPTION ALGORITHM "AES128"; # by default
  CONFIGURE COMPRESSION ALGORITHM 'BASIC' AND 'DEFAULT' LIBERATION OPTIMIZE FOR TRUE LOAD; # by default
  CONFIGURE THE NONE ARCHIVELOG DELETION POLICY; # by default
  CONFIGURE SNAPSHOT CONTROLFILE NAME TO ' / app/oracle/product/11.2.0/dbhome_1/dbs/snapcf_devdb.f'; # by default

  What is your question? Here's the oracle documentation that explains how to set the format.
  [url http://docs.oracle.com/cd/E11882_01/backup.112/e10642/rcmconfb.htm#BRADV8101] Configure the automatic backup of control file Format

  By default, the format of the file auto save for all configured devices is %F variable substitution in the FORMAT clause. This format of variable translates c-IIIIIIIIII-YYYYMMDD-QQ, with placeholders defined as follows

  IIIIIIIIII means the DBID.
  YYYYMMDD represents a date and time of the day that the backup is generated.
  QQ is the hexadecimal sequence that starts with 00, and has a maximum of FF.

  Kind regards
  NORTH CAROLINA

  Published by: NC on October 15, 2012 16:26

• INDD CS6 error: "InDesign can't open files in format 'InDesign CS5.5 Document'.

  Working in CS6 on Mac OS X 10.7.5: when I double click on an INDD file in the Finder, I get the following error in InDesign:

  "The 'name of the doc' document could not be opened. InDesign can't open files in format 'InDesign CS5.5 Document '. »

  It started recently and I was not able to understand why. I've not updated INDD or OS X. I can't think of anything that has changed, except perhaps an update to Java. Have not updated the latest OS yet.

  The I'm opening the files are files that I created with CS6 - only a few minutes ago.  I can open fine using the file > open command in InDesign, so I can open them, but I can't open them by double clicking it in the Finder or by dragging the INDD icon in the dock.

  The info in the said Finder's "Get Info" window is configurΘ for dΘmarrer in CS6 CS6 files and I have permissions to read and write. They are not locked.

  It is not disabling, but rather annoying and slows me down since it is one of the most common ways I open files.

  Any suggestsion would be appreciated.

  Probably will not work because this looks like a problem of operating system of some sort, but you can try trashing the prefs see replace your preferences

• Oh, joy, joy, joy... CS5 and psd

  Oh, joy, joy, joy... CS5 and psd.

  No rendering necessary.

  I use a lot of psd (logos, graphics, watermarks etc) in my workflow - usually positioned, scale, opacity, blends, shadows applied..., so I thought I would test.

  No rendering necessary.  Brilliant

  This is good news and another reason for me to jump on the upgrade.

  Please report to us,

  Hunt

• Photoshop CS5 (under Windows 7) crashes when I try to print

  Hello

  I am running 64-bit Photoshop CS5 Extended upgraded to the version current (12.0.4).

  When I try to print, every time, I get the following error immediately:

  > Adobe Photoshop CS5 has stopped working

  Windows is checking for a solution to the problem

  and then, shortly after

  > Adobe Photoshop CS5 has stopped working

  A problem caused the blocking of the program works correctly.

  Windows will close the program and notify you if a solution is available.

  Quite exasperating. My printer works fine. I can print pictures itself since Lightroom without problem (which, on this occasion, I had to - saved PS, imported into LR, then print... very effective!).

  I see there are other posts on this but they seem to be mainly Mac and also, many seem to heal by opting for 12.0.4.

  I am a user relatively light (non-professional amateur enthusiast), so I do not regularly use of PS. However, this also means that it is almost an installation of out-of-the-box, because I do not tinker with it either. There are if long I used it last I don't remember if I had this problem last time - I remember vaguely having sometimes but not others. Seems not important to know if I opened the file is a JPG or a PSD (the only two I've tried).

  Any help out there?

  Thank you

  Alastair

  Network printers can be a problem.  Should not be set as the default printer.

• My reading shows the HDMI as a default device, but the sound is yet to come of the computer laptop, even when the volume is turned off on it

  Original title: HDMI sound

  I know that many have had problems, but I did not mine specifically. My HDMI connection was working fine with my laptop HP and m HD tv. I didn't use it for a while, now it is just the video, no audio on the TV. My reading shows the HDMI as a default device, but the sound is yet to come of the computer laptop, even when the volume is turned off on it. Ive read all the reviews and updates of pilot who was old. I don't know what else to do!

  Hello

  System Restore does not have this long period of time.

  You may want to refer to the suggestions in the thread below link and check.

  No sound via HDMI output portable computer connecting to TV

  I hope this helps.

• My CS5 Illustrator (just updated) guard smoking when I either try to re - create a link, scroll through fonts, use the pipette for the selection of the color of police/or save to a new folder outside of the previously used. Even when I choose to close, he

  My CS5 Illustrator (just updated) guard smoking when I either try to re - create a link, scroll through fonts, use the pipette for the selection of the color of police/or save to a new folder outside of the previously used. Even when I choose to close, he said that it "unexpected." Really irritating - ideas?

  Your options are:

  -try to make it work (could take a few hours and may does not always work)

  -get the CS6 (has problems as well, but works a little better)

  -get CC

  -install a virtual machine with an older system (10.6 or 10.8)

  -Check if your Mac is not as new as you think and you can still run Yosemite (also has problems, but perhaps not as much)

• When I add text to an image that starts as a RAW file, I have no problem. When I try to add text to an image that is only a jpg file, the size of the text is extremely low. Even when I change the the font size to 72 pt, it is always small. How can I fix i

  When I add text to an image that starts as a RAW file, I have no problem. When I try to add text to an image that is only a jpg file, the size of the text is extremely low. Even when I change the the font size to 72 pt, it is always small. How can I fix it?

  You set the font size to a size that is suitable for the size of the document.   Size of the document may vary everywhere.   To resolve this problem in action, I solved in scaling the document to a known size then use a font suitable for a document of this size.  When you resize an image using size with resample Images not only checked a single pixel is change everything that is changed is the DPI image resolution setting.  So if you size a picture 8 "wide you choose a font size is good for wide image 8" the Save action.  To work around the problem of changing the size of the printing I wrote a Script to use in such an action.  The script is used twice, there is a backup and restore script.   The first time that the script is used the script records the resolution DPI images in the metadata documents.  The second time that the script is executed, it retrieves the registered PID parameter deletes the record of metadata from images and set the DPI images that had been saved.    If the use of fonts for the document 8 "will be resized to fit the print original size.

  In a script, you can calculate a correct font size to use.  Actions cannot retrieve information or use logic. They need to use the Plug-ing and Script where logic is needed.  When you make using Photoshop UI you use your eyes and brain.

  Package of shares of crafts UPDATE August 10, 2014 added conditional measures Action Palette tips.
  Contains

  • Action Actions Palette Tips.txt
  • Action creating Guidelines.txt
  • Action dealing with Image Size.txt
  • Strengthened through scripts functions.txt Photoshop action
  • CraftedActions.atn sample Action set includes an example of Watermarking action
  • Sample Photoshop Actions.txt CraftedActions the value stored in a text file.
  • More then a dozen Scripts for actions

  Example of
  Download

• Add default column have Boolean when creating table

  Hello
  
  I am trying to create a table with the default value for boolean data, as shown below:
  
  
  CREATE TABLE test_users)
  user_id number (11) NOT NULL PRIMARY KEY,
  first name varchar2 (50).
  VARCHAR2 (50) last_name,.
  e-mail varchar2 (100),
  user_password varchar2 (100),
  Zip_code varchar2 (50).
  title varchar2 (100),
  Description varchar2 (2000).
  PICTURE_PATH varchar2 (2000).
  one_time_activation number (1) value default null check (one_time_activation in (0,1)).
  one_time_activation_code varchar2 (100),
  is_active number (1) value default null check (is_active in (0,1)).
  security_question_id number (11),
  security_answer varchar2 (100),
  inserted_date DateTime,
  DateTime MODIFIED_DATE,
  check the number IS_DELETED (1) default 0 (is_deleted in (0,1)).
  last_login_date DateTime,
  no_of_views number (20) default 0,.
  is_redirect_to_edit_profile number (1) 1 check default (is_redirect_to_edit_profile in (0,1)).
  present_login_date DateTime,
  check the is_interested_ab_membership number (1) default 0 (is_interested_ab_membership in (0,1)).
  joined_date DateTime,
  removed_date DateTime,
  is_admin_deleted number (1) default check 0 (is_admin_deleted in (0,1)).
  moderated_by number (11),
  is_subscribe_newsletter number (1) default check 0 (is_subscribe_newsletter in (0,1)).
  user_pagination number (3) 15 by DEFAULT
  );
  
  but I'm getting
  Error on line 1
  ORA-00902: invalid data type
  
  Thank you

  Whatever your question has to do with sql developer?

  You don't even tell what database you want to use.

  Oracle does not support a data type 'datetime' so your create table statement will not work in Oracle.

  If you replace "datetime" 'date' the table creates very well.

• How to set a default application Photoshop version, when the two versions are installed?

  I have two versions of photoshop installed on my Mac. Double click on the Photo in Bridge CS6, the photo opens in Photoshop CS5 (Photoshop CS5 (default). Can Haw I set Photoshop CS6 as the default application?

  Thank you for your prompt replay, I already did what you suggested, but it does not work. When you open in Bridge file > open with still see you Photoshop CS5 (default) and the file opens automatically with Photoshop CS5 and CS6 not unless you specifically choose open with Photoshop CS6. I vaguely remember that I found once somewhere "would you like Photoshop xxx be your default option? but I can't remember where, and I can't find

• When I share a note with a checklist, I can see when the other person check of an item. I do not see when registering an item (it is disabled). Why?

  When I share a note with a checklist, I can see when the other person check of an item. I do not see when registering an item (it is disabled). Why?

  Try switching your Notes on / off under settings > iCloud or maybe restart the device-restart your iPhone, iPad or iPod touch - Apple Support to see if this could solve the problem.

• Cannot check iOS 9.3 during the upgrade process. When there is a good connection internet, says no internet. Tried more than 30 times, even after reboot. Any suggestions?

  Cannot check iOS 9.3 during the upgrade process. When there is a good connection internet, says no internet. Tried more than 30 times, even after reboot. Any suggestions?

  You chose the option in iTunes to download the firmware first and install it in a second time after that?