Check out pivotTableView! 1 is either missing or does not support this format

Similar Questions

• Windows Photo Viewer cannot open this photo because either way, Photo Viewer does not support this file format, either you do not have the latest updates to Photo Viewer

  New PC with Windows 7.  Photos taken before the new PC either cannot be a spectator, or can be displayed but are in the right folder with the incorrect file names (e.g. cat photo is labeled as DOG)

  In my case, when I plugged in my phone on my desk, it prompted me to update the software to communicate better with my phone. Immediately after completing the update was when I lost the ability to open images in Photo Viewer.

  To solve the problem, I went to control panel, and then uninstall a program and then uninstalled the newest program associated with my phone. It was easy since I knew exactly when he started to act up. Some of you may need some trial and error to find the problem.

• I often get in a loop when creating a projector.  Something causes error dialog boxes saying that a supplement is either missing or was not initialized successfully. What causes this?

  Director 11.59 and 12 I get error dialog boxes when I run a movie who say, ' additional text is either missing or does not initialize properly.  No matter what I do with the text Xtra, it does not affect the problem one way or another. Is this a known issue?  How can I fix it?

  Thanks to anyone who can help me.

  Dewey

  Hello Dewey,

  You see this error message when...

  1 # when you try to run a Director published the projection file (either a windows. EXE, or a mac file. File APP)?

  OR

  2 # when you load a .dir file into Director for programming?

  If it's the number 1 #-then you will need to link your xtras in your projection file.

  See the tabs along the top of the screen of the Director (less change & file)

  Modify > movie > xtras > TextXtra PPC (included in the projector - is checked)

  file > publishing settings > files (make sure exclude all xtras is NOT checked)

  If it's number # 2 - so you can have two copies of the xtra text inside your configuration/xtras folder (but it's not likely)

  (* if you try to make an iOS app - then text xtra doesn't either)

  concerning

  Milky

• HP Officejet Pro 8600 more indicates 'missing or does not print head ". I followed HP 4 instruct. Help

  HP Officejet Pro 8600 more indicates 'missing or does not print head ". I did 4 HP instructions and now I'm #4: contact HP. I cleaned the heads, replaced the 4 cartridges, removed and replaced the unit restarted, everything. Now what?

  There is a document with measures to help address the missing or condition is not the print head.  This document can be found here.

  From your post, I understand that you did some the most of these steps, but run Solution 4: replace the print head.

  If you are still in warranty, HP can replace the printer/printhead without cost to you. I'll link the information to get in touch with them below. The link takes you to a form to fill out. Once you fill it and she is treated, it will give you the printers warranty information, a file number and the phone number to call.

  HP Technical Support call case form:

  https://h10025.www1.HP.com/ewfrf/wc/phoneInput?cc=us&DLC=en&LC=en&product=5061082

• I'm trying to get my spell checker in Windows Vista to work, but it does not check my work. I put several spelled words and it always gives me a "Spell Check Complete" message

  I'm trying to get my spell checker in Windows Vista to work, but it does not check my work. I put several spelled words and it always gives me a "Spell Check Complete" message

  It can cause that. Their our dew case, where you can smell bad words and spell check don't pick them up. It wood help if their was also a check for two grammar...

  Just an example... :-) Mike Hall MVP - Windows Desktop Experience http://msmvps.com/blogs/mikehall/

• If the box in advanced running opencl is grayed out, it means my system does not support it and how can I solve this problem?

  If the opencl box is grayed out in advanced running in the preferences settings, does this mean that my system does not support?  If so, how should I do?

  Nice day!

  Here is a list of test GPU (series):

  https://helpx.Adobe.com/Photoshop/KB/Photoshop-graphics-processor-Troubleshooting-FAQ.html

  With regard to the minimum requirements of extraction:

  System requirements | Photoshop

  Kind regards

  Pfaffenbichler

• "Check if plug-ins are up-to-date" does not "

  The ' check if your plug-ins are updated "link on the page of the Add-ons Manager does not work properly. The link opens the page of Mozilla student Reps. I use Firefox 12.0

  This problem has been fixed on the side of Mozilla in Bug # 752232

  He tries to use https://www.mozilla.com/plugincheck/ and then gave an error when redirecting to https://www.mozilla.org/plugincheck/

  Many pages of Mozilla that is found on mozilla.com have since changed, either by or is redirected to mozilla.org and sometimes problems arose.

• Find missing files does not work - what don't get me?

  I have had my photos stored on an external hard drive and upgraded to a bigger external drive. My husband has copied the files to the new drive. Now I can't access photos on the drive. I followed the steps to update the location of the pictures, but it does not work. I tried "find lack of pictures" and that does not work either. I follow the steps, but nothing happens.

  What I am doing wrong? I suspect, I'm missing a simple step, but I tried several times with both drives. I restarted LR. I restarted the computer. Nothing makes no difference.

  Thanks for any help or someone can give advice.

  Hi nannetter,

  Please connect the new external drive that contains all of the images, now open Lightroom and on the Library tab, update the location of the folder.

  See the link below.

  How to find missing photos in Photoshop Lightroom

  Note: Please make sure that copy you all images in the structure of the last hard drive to the new.

  Kind regards

  Mohit

• Either the file does not exist, you are not allowed, or is the file may be in use.

  I'll do that as a separate issue because I think that, ultimately, it is this error that is causing me so many problems in InDesign.

  Scenario...

  New Document > drag a CC library item into the document > save the document and close InDesign > open the document, the error message...

  "This document contains < number > links to sources that are missing.  You can find or reedit the missing links using the links Panel. »

  When you attempt to link the missing links again...

  "The file does not exist, you are not allowed, or is the file may be in use."

  When you remove the link to the document and try to reinsert it draws CC...

  "The file does not exist, you are not allowed, or is the file may be in use."

  All this becomes a major problem when trying to output the document in PDF format, which is asking our printer.  The binding elements are given white background and they are of poor quality, too.

  Is this a known bug?  I see a lot of messages about it, which goes back to 2012!, but no solutions to this day.

  I hope someone can help.  Thank you.

  NJ

  > I'll try things that you suggest, but what is most concerning is that this library works with new documents - library items don't report any error.  So why he pointed out problems in a single document display paths and which are all correct?

  The problem could be in the InDesign document, in that you move the data from the library?

  Try saving this file as a file IDML (to clean possible corruption), and then reopen it in a new document and try again.

• Can I TEMPORARILY disable or Turn off match without opt-out, so the matching and download process does not occur until I want to him and re-enable/turn back on?

  Can I TEMPORARILY disable or Turn - off Match without opt-out, so that the matching process and upload does not occur until I want what he and re-enable/turn it on again?

  Hello

  Yes, but why do you want to disable iTunes game? When you subscribe to Match iTunes, your library is analyzed to determine what can be matched or must be downloaded. When the scan is complete, your library will be updated automatically when you add new tracks or edit metadata.

  Jim

• Bootcamp Partition missing and does not appear in the terminal

  I have a MacBook Pro (retina, 13 inches, end of 2013)

  10.10.5 running

  I started the process of installing windows yesterday but ran into a few issues (type of drivers file missing DVD caveat which was in reality a use a Flash drive that is too big/fake) in any case, my various attempts resulted in the 50 GB of space, I partitioned using BCA to disappear. I've backed up with time machine and am ready to do a total restore at this point, but I am worried because the 50 GB is even not appearing in Terminal when I search for it. All other methods I've read on here in these last hours were the people whose music appears but just need to be repaired using fdisk or whatever.

  Im not to concerned messing too much I want to just get the thing started to restore so I can start over with the windows install. I need to know if, after doing a thorough cleaning of my reader im going to miss yet only 50 GB

  Here is a list of my Terminal:

  MY-MacBook-Pro: ~ MyName$ sudo TPG - r - vv show disk0

  Password:

  See the TPG: disk0: mediasize = 251000193024; SectorSize = 512; blocks = 490234752

  See the TPG: disk0: PMBR to sector 0

  See the TPG: disk0: Pri GPT to sector 1

  See the TPG: disk0: GPT Sec at sector 490234751

  start index size summary

  0 1 PMBR

  1 1 Pri GPT header

  2 32 table GPT Pri

  34 6

  40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B

  409640 390899288 2 part TPG - 53746F72-6167-11AA-AA11-00306543ECAC

  391308928 1269536 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC

  392578464 97656255

  490234719 32 table dry GPT

  490234751 1 dry GPT header

  MY-MacBook-Pro: ~ MyName$ sudo fdisk/dev/disk0

  Disk: geometry / dev/disk0: 30515/255/63 [490234752 sectors]

  Signature: 0xAA55

  From end

  #: cyl hd s - cyl hd s id [Start - size]

  ------------------------------------------------------------------------

  1: EA 1023 254 63 - 1023 254 63 [1-490234751]

  02:00 0 0 0-0 0 0 [0-0] unused

  03:00 0 0 0-0 0 0 [0-0] unused

  04:00 0 0 0-0 0 0 [0-0] unused

  MY - Pro: ~ list of the MyName$ diskutil

  / dev/disk0

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 251,0 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_CoreStorage GB 200.1 disk0s2

  3: disk0s3 Apple_Boot Recovery 650.0 MB HD

  / dev/disk1

  #: NAME SIZE TYPE IDENTIFIER

  0: Apple_HFS Macintosh HD * GB 199,8 disk1

  Logical volume on disk0s2

  31C1D849-83DD-46DD-A44A-BD811B7FD3BF

  Unencrypted

  This line represents the free space.

  392578464 97656255

  97656255 * 512 / (1000 * 1000 * 1000) = 50GB or

  97656255 * 512 / (1024 * 1024 * 1024) = 46.5 giB

  My recommendation is

  1. back up OSX by using Time Machine - use Time Machine to back up or restore your Mac - Apple Support . The disks that you can use with TM are Backup that you can use with Time Machine - Apple Support .

  2. boot into Internet recovery - OS X: on OS X Recovery - Support Apple (CMD + Opt + R).

  3. clear your internal drives. Use the utilities-> disk utility to erase your internal drives. If this does not work, we can manually rebuild the disks.

  4 restore OSX using the links in step 1.

  5. run SMC/NVRAM reset without any connected external storage.

  6. run the wizard of BC and install Windows.

• Pavilion dv6-6c53cl: dvd player not working not not after restoring - all missing drivers, does not appear in Device Manager

  Recently, I have restored my computer dvd6-6c63cl of flag State 'out of the box.  The dvd drive no longer works.  When you put a CD, you can hear him swirling but the screen does not open.  In addition, in the Device Manager section, dvd is not listed.  I think that I need the drivers, but I did have luck to find them on hp.com (just a recovery disc, you can order).

  I tried some of the solutions on this forum for other computers, but is it didn't work (FixIt) or things in the registry (filters) were not there and one was something that was 32-bit and since it's 64-bit, I was afraid to try it.  Clearly, I don't know enough about computers.

  In which case it is important, I recently had my fan replaced and do not know if the dvd player worked after that.  Obviously not used often.

  You can provide any help would be greatly appreciated.  The computer is 3 years old so I don't want to add 'guaranteed' type plans, but at the same time, I don't want to replace the computer for something so little.  The restoration of fixed the problems I had (internets public wouldn't connect and updates did not exist).  Thank you!

  You may consider replacing the internal DVD player or using an external DVD burner.

• Shorter Oxford English Dictionary does not settle "this program cannot start because neko.dll is missing.

  OT: neko.dll dissappeared.

  Hi guys,.

  Windoze 7, I had the SOED (Shorter Oxford English Dictionary) working, then all of a suddy, it does not open. When I try to reinstall from the disc, I get: "this program cannot start because neko.dll is missing from your computer, try reinstalling the program to fix this problem." Easy to say, of course, but where can I find a safe download? Go to Micromush site - search returns no results.

  Tried the following without result:

  "When you install software that uses the dependence of neko.dll, the software should automatically save the file for you. In some cases, your DLL file can not save correctly and accordingly, will provide an error "neko.dll unregistered. Fortunately, you can use a built-in utility called "Microsoft Register Server (regsvr32.exe) to register your neko.dll file again.

  How to record again neko.dll from an elevated command prompt (Windows XP, Vista, 7 and 8):

  1. Click the Start button.
  2. Type "command" in the search box on ... Are NOT hit ENTER yet!
  3. While now CTRL-SHIFT on your keyboard, press ENTER.
  4. You will be prompted with a dialog permission.
  5. Click Yes.
  6. Type the following command: regsvr32 /u neko.dll.
  7. Press ENTER. This will Cancelled the REGISTRATION of your file.
  8. Type the following command: regsvr32 /i neko.dll.
  9. Press ENTER. This desire to RE-SAVE your file.
  10. Close the command prompt window.
  11. Restart the associated program neko.dll error. »

  Any suggestions?

  see you soon,

  Paul

  Hi Paul,.

  Thank you for your reply,

  As you have tried all the steps in the post above and none of them worked. I suggest that the manufacturer of the Application for additional support.

  See the following link for law enforcement support.

  http://www.MobiSystems.com/support/

  Hope this helps, please get back to us for additional help on Windows. We will be more than happy to help you.

  Thank you.

• BOOTMGR is missing. keyboard does not

  First of all, my boot sequence is starting from the first DVD alreaey value.

  When I start my computer, I get the message that my lack press Ctrl Alt Del to restart Boot. So, I put the my Win 8 DVD in for repair, but the computer does not recognize my usb keyboard and I can't press any key to boot from the DVD. I can't even in BIOS. I have motherboard Biostar G31 - M97 TE houzet. When I press a key, there is this ticking sound from the speaker to the motherboard!

  What can I do? There is no OS on my computer because it's a new HARD drive. Even Ubuntu boot DVD does not work (even though I probably shouldn't say this here).

  I do not underetand why is not the DVD starts automatically when the first on BIOS boot device is the DVD. I even tried with Win 7 DVD.

  Thanks in advance

  Hello Al,.

  Thanks for posting your query in Microsoft Community.

   

  You did changes to the computer before this problem?

  The problem can be caused by several factors, such as incorrect entries in BCD and hardware incompatible or software.

   
  Based on the current situation, I suggest to try the following methods to resolve the problem.
   
  Method 1: Repair to start the Windows recovery environment (WinRE).
   
  Your system without not a CD/DVD drive, you can view the steps in method 4 in the following article:
  Windows error message «Bootmgr is missing Press Ctrl + Alt + Delete to restart»
   
  Method 2: Use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows.
   
  Try to go in the system recovery options similarly as you did in method 1 and click command prompt.
  Then, type the following commands and press ENTER after each command:
   
  bcdedit/export C:\BCD_Backup
  c:
  Boot CD
  BCD attrib s h - r
  Ren c:\boot\bcd BCD.old
  Bootrec /RebuildBcd
   
  See the following link for more information:
  http://support.Microsoft.com/kb/927392
   
  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• I want to turn the spelling checker in Waterfox, but the method for Firefox does not work?

  I added my language in the options and set it as your preference and ticked "check my spelling as I type", but I KEEP getting the spelling English-Checker when typing on a certain forum. And I type in Dutch, so it is very difficult to read with almost all the underlined words...

  So, I can't put it in my mother tongue, and I can't turn him completely. Either one would be great...

  I've been loolking for a way to show that this issue concerns WATERfox, not FIREfox, but somehow there is no separate place to do...

  The global setting to turn off all THE spell checking in Firefox is here:

  "3-bar" menu button (or tools) > Options > advanced > general mini-onglet > "Check my spelling as I type".

  You say it doesn't work?

  Note that the already loaded pages are not affected by the change, only the pages that load after that you activate the setting. So if you want to stop the spell check on the current page, you need to recharge after changing the setting.