Check the connection status of mobility Extension

Similar Questions

• PC to tv connection error "no signal - check the connections and the external device is turned."

  Original title: pc to tv connection

  I have an Acer Espire Vista 32bits. Connect to a Panasonic TC L32x30 HD TV. The TV has a 'PC' marked port that matches one VGA cable. I have the VGA end of the cable is connected to the TV. The other end is connected to the PC Tower via a DVI adapter to the port where was my monitor.
  TV output is set to "PC". I turned on my PC, the Acer (Bios) screen came. He then shows the block scroll bar. Just as Windows is about to light up, cutting signal. I never get to see my office. A message appears on the screen saying "no signal - check the connections and the external device is turned on."
  I had posted before saying that I had problems ranging from VGA to VGA. That's why I bought the DVI adapter to try another solution.
  I hope I made things clear enough for someone to help him.

  Hello Winston M,.
  I actually solved it. Went to the screen and chose. Connection just how I mentioned. second monitor, default Says. I then checked"Extend Desktop to this monitor.
  As I type this, I can see it on my TV screen.
  Thank you for taking the time to answer my question.
  Problem solved
  Ray

• Optical drive not found. Check the connection of the disk.

  CD/DVD drive has suddenly stopped working.  I noticed when I tried to eject a CD of music. Convenience store initiated and clicked on CD/DVD playback. Read the message of the convenience store: "Windows did not detect an optical disc drive. It can be disconnected or disconnected. Check the connection of the drive, or connect the player. "All connections seem to be good. I tried to restart. Troubleshooting repeated with the same result. Device Manager displays a missing optical drive. Please notify.
  eMachines
  Model: EL1352G
  Processor: AMD Athlon II X 2 220 processor 2.80 GHz

  This looks like a probable hardware failure.  See if the drive is seen in the BIOS.  If this is not the case, replace.

• DirectX on Windows 8 (64-bit) "your DirectX Runtime is up-to-date. Download and install this file from Microsoft. ""Setup could not download the file. Please try again later or check the connection to the network. »

  So I tried to get this to work at least for a day now, but whenever I try to launch my new game I'm away I kept getting this error: "your DirectX Runtime is up-to-date. Download and install this file from Microsoft. ' When I was re-directed I downloaded, it opens and clicks on agreed and all this things, but after 10 seconds initialization, it gave me this error: "Setup could not download the file. Please try again later or check the connection to the network. " I checked all that nothing seemed to be wrong, I did it again and again and again. So I just went to a solution or any news for DirectX. So far, no luck.

  I am running on DirectX 11 right now, is if there is a new DirectX or am I a jerk, and that is a different problem? I can't understand it.

  Thank you

  Hello

  Try this link... it's a complete Installer for DirectX Runtime June 2010... This is an optional package that use a lot of games...

  http://www.Microsoft.com/en-us/download/confirmation.aspx?ID=8109

  The file is self-extracting, so take note where extract you it to.

  Open the folder, and then double-click DXSETUP...

• How to check the connection information?

  Hello
  
  I want to check the connection information to an application. Can anyone suggest how to on this subject?
  
  
  Thanks in advance,
  Annie

  Hello Annie,.

  Have you ever looked at the sight APEX_WORKSPACE_ACCESS_LOG? Is it what you need?

  Greetings,
  Roel
  http://roelhartman.blogspot.com/
  You can reward this response in marking it as useful or Correct ;-)

• How to check the order status online.

  I ordered an all-in-one VAIO by chat and phone.  I knew that Sony was temporarily out of stock.  Then, I received an email that I thought would allow me to track the order.  All I have is the number of order at the moment.  When I try to follow the command, it says use order number and postal code.  When I do that, it takes me to a page that says to use my temporary password and replace it with a perm.  I was never given a temporary password.  How to make a so that I can track my order.

  Hi Judith,

  Thanks for the post.

  Have you checked the status of the order here?

  http://store.Sony.com/webapp/WCS/stores/servlet/SYOrderStatusLandingView?StoreID=10151&langid=-1&cat...

  Contact Sony store:

  http://eSupport.Sony.com/us/Perl/support-info.pl?info_id=927

  Support order:

  1-877-865-SONY (7669)

  Mon - Fri 08:00-12:00 AM (midnight) AND

  Sat - Sun 10:00-9: 00 am EST

  Technical support:

  1-239-768-7547

  Mon - Fri 08:00-12:00 AM (midnight) AND

  Sat - Sun 10:00-9: 00 am EST

  Please indicate the solution as accepted, if you find this information useful.

  Kind regards

  Tony.

• Error: "connection attempt timed out, please check the connectivity of the internet" when trying to connect to Cisco AnyConnect 2.5 on Windows 7 x 64 computer with modem usb wireless HSIA.

  Original title: issue with Cisco AnyConnect 2.5 on win 7 x 64 when connecting to the internet using wireless HSIA usb modem.

  I have win 7 x 64 enterprize edition on my laptop.

  I have problems with Cisco anyconnect VPN client. When I'm on my corporate network it works fine.

  But when I connect to internet using HSIA modem usb wireless home form, client AnyConnect VPN will not connect. The error I get is "connection attempt has expired, please check internet connectivity.

  Please help me to solve this problem as soon as possible.

  Hi Manish,

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet forums for assistance.

  I also recommend that you contact the VPN support to help:

  https://supportforums.Cisco.com/community/NetPro/security/VPN

• Check the connection to a remote Oracle database

  
  Hello

  I have an application that runs on a server that connects to an Oracle database on another server.  The application uses Java and JNDI to connect, there is no Oracle client installed on the server hosting the application.  The application seems to have been to connect to the database on the other server.  How can I check that the connection to the database still work from the server hosting the application?  Is there a software tool that I use does not require Oracle client must be installed.

  Thanks in advance

  Alanjo

  the connection request is saved in the file listener.log on the DB server

• problems opening program. said the service is currently unavailable. Try later or check the connections networki. I have windows 7. I am connected with everything else. I have phontshop elements 10. bought new.

  I spoke with a number of people. (cats). Why when I try to open 10 items that I installed, it says "service is currently unavailable.  Try more later or check the network connections.

  I have connections on all the rest. It is new, has never been used. bought at Office Depot.  I can't save my numbers if I can't connect.

  Thank you

  Nancy

  See if the suggestions in this link to help you:

  Log, activation, or connection errors. CS5.5 and later, CC, DC Acrobat

  Kind regards

  Guinot

• Policies for approval 11g IOM - approval rule to check the Connection Manager

  Hello
  
  I have a requirement in which if the applicant of a resource is a Manager, while demand should automatically be approved. However if the applicant is one person other than the owner, then it should be assigned to the Manager for approval. Is it possible to do this verification in the approval rule?
  
  My idea was to create two trust policies for the same resource with a single policy with auto approve activated if the connection applicant is same as connection of eating of the beneficiary and other policies with the default approval process BeneficiaryManager if the connection of the applicant is different from the connection of the beneficiary. I don't know if the approval rule can be configured to check these values during execution.
  
  Any kind of help/suggestion is greatly appreciated.
  
  Concerning
  Deepa

  To do this, you change the task of bpel and specify the condition to jump for the task. In the rule to jump, you must specify if the applicant is responsible for the user (the two values that you get in the payload). Set it up this way auto approve request to the Manager.
  Also be sure to affect the outcome of the BPEL task of condition of approval so that IOM does not wait for the State.

  HTH,
  BB

  Published by: bbagaria on Sep 9, 2011 05:36

• Check the connections TCP & UDP host through ACL

  Hello!

  I use ACL to control TCP UDP & connections pass through my router (C805 & C2500). I plan to control of the host, but after I have created a new ACL that and add it on IP Access-Group of my Serial interface, the acl that I add before who is used to control the connections TCP & UDP is removed because of an ACL. How can I handle this?

  What you have is a standard access list, which would block anything with the source 127.0.0.1 address and an access list more extended negates several types of traffic.

  To combine I would rewrite the access list standard as a broader access list:

  access-list 100 deny ip 127.0.0.1 host everything

  who deny packets whose source 127.0.0.1 address.

  I would put rewriting stated as first statement in the new list access followed by others which would give you this:

  Note 100 access list refuse the specific host

  access-list 100 deny ip 127.0.0.1 host everything

  Access-list 100 remark block number TCP and UDP ports

  access list 100 permit tcp any any eq www

  access-list 100 permit tcp a whole Workbench

  access-list 100 tcp refuse any any eq 135

  access-list 100 tcp refuse any any eq 445

  access-list 100 tcp refuse any any eq 593

  access-list 100 deny udp any any eq 135

  access-list 100 deny udp any any eq tftp

  access-list 100 deny udp any any eq netbios-ns

  access ip-list 100 permit a whole

  That should do it.

  HTH

  Rick

• I get no sound at all. run tests, checked the connections, etc. His record game

  One day, no sound from any type of place, radio, ecards, Facebook, etc.  Everything about sca and troubleshooting ok.  ??????

  Hello

  Try these steps, let me know exactly what happens after each.

  No sound

  If Windows Media Player seems to work fine, but you cannot hear the audio, you will have a problem with your speakers or sound card. Check all audio connections if you are using external speakers and to ensure that sound levels are defined correctly and not cut. Use Device Manager to make sure that your sound card works correctly and is selected as the audio device by default.

  Verification of the sound settings

  Click on Start , then Control Panel
  Select the material and audio and noise
  Under playback.. What icons you see?
  Click Properties and then click headset/speakers
  According to the levels... is at 100% and not CUT?
  Under Advanced... What is the default format?
  Click test... do you get a sound?

  Look for the old drivers Device Manager and update

  Drivers can become outdated and could be damaged to the point where they slow the system performance. Looking for the old drivers Device Manager, follow these steps:

  Click Start, click Run, type the sysdm.cpl in the Open box, and then click OK.

  Click the Hardware tab, and then click Device Manager.

  Right click on the device, and then click Properties.

  Click the driver tab.

  Compare the version of the driver on the tab, with driver version information on the latest version of the driver that is published on the website of the manufacturer.

  To resolve problems that are caused by corrupted or outdated drivers, install the latest drivers:

  Click Start, click Run, type the sysdm.cpl in the Open box, and then click OK.

  Click the Hardware tab, and then click Device Manager.

  Right click on the device, and then click Properties.

  Click on the driver tab, then click on set to update driver.

  Follow the instructions on the screen to complete the update of the driver.
  b Eddie

• Checking the connection failed for the source of data on port 1433

  Try to set up a DSN for a database of SQL Server on a new computer and it fails every time.

  Connection verification failed for data source: csf

  java.sql.SQLNonTransientConnectionException: error [Macromedia] [SQLServer JDBC Driver] establishing socket to host and port: SANDYPC:1433. Reason: Connection refused: connect

  The root cause was that: java.sql.SQLNonTransientConnectionException: error [Macromedia] [SQLServer JDBC Driver] establishing socket to host and port: SANDYPC:1433. Reason: Connection refused: connect

  Now, when I installed the CF 11, it is installed on port 8500.  However, when I try to change the port in the configuration to 8500, I get this error:

  • Connection verification failed for data source: csf
    java.sql.SQLException: timed out trying to establish connection
    The root cause was that: java.sql.SQLException: timed out trying to establish connection

  I can't find anything online about how to solve this problem!  Help!

  Hello

  Is that SQL Express edition? If so maybe TCP protocol is not enabled. Windows Firewall is enabled? Check port 1433 is open.

  Normally you would not create a data source to the apache 8500 port, which is a web server not Database not the port of the server.

  HTH, Carl.

• Portege R500 - how to check the warranty status?

  Hello.

  You just bought the Portege R500, used a!
  But THERE AR ANY WARRANTY mark on the back. The user has deleted everything back!
  Is it possible, how do I know about the warranty in this case. ?

  PC suite XP OS seems with assistance from Toshiba!

  Hello

  Normally be guaranteed can be checked with the serial number you've already written. I m using Windows XP too and if you start the tool of diagnosis PC from TOSHIBA, it shows all the information about your computer and hardware. There you can also see the serial number.

  Check this box!

• connection to the Internet. data recovery problem. check the connection. using netflix app... in windows media center

  last week, something changes in the netflix app and can no longer see the movie through the app.  We broadcast online via netflix with no problems.  We have even reinstalled silverlight in the hope of fixing the problem, but in fact no difference. We continue to receive the above error msg.

  Please help, we would really use the App again.

  Hello

  You can try the suggestion in the given below link and check if this is useful.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_programs/Netflix-in-Media-Center-returns-a-there-was-a/729583bd-aa22-4A06-BAD8-3be73bb0f624

  See also:

  http://thegreenbutton.com/forums/p/99379/526039.aspx

  Hope that information was useful

  Amrita M

  Microsoft Answers Support Engineer