Check the consistency of the regular Raid

Similar Questions

• How to check the RegEx validation

  Hello

  My application needs to users to enter the regex. My question is how I can check the validation of the regular expression that users enter. The RegExp class does not provide any methods to check the regular expression validation.

  Kind regards

  Haibin

  You need to hand roll your own validator, unless someone knows of who is there. Flex does not validate the RegEx.

  If this post answers your question or assistance, please mark it as such.

• Satellite L550-1CC starts by checking the records of consistency

  Hi all

  I have a Satellite L550-1CC, running Windows 7.
  Recently, the departure until I received the message "one of your disks needs to be checked for consistency", and then it runs a scan, and after 2 0r 3 minutes boots up to windows as usual.
  This happens not all the time, but recently, more often.

  I have a problem with my hard drive?
  Any suggestions?

  Hi shaun1d,

  Have you noticed some unusual noise from the HARD drive?

  I've never had such a problem on Windows 7, but it would be interesting to know if you can find some information about it in the same Windows Viewer.
  Have you looked there already?

• "Error - disk should be checked for consistency", computer does not complete check of the disk system.

  Original title: computer refuses to perform disk full system check.

  After that I turned on computer always run a check disk systems saying 'need to drive to check for consistency', it stops at 82%, the disc makes noise.  It is said that he replaced bad clusters in file and after checking the window/options/install/win_18.CAB, it stops there.  She always checks the drive C. Checked for viruses, no.  Any ideas?

  Hi DanaCox,

  You did it of any material changes or software on the computer before this problem?

  I suggest you chkdsk from the Recovery Console and check if the problem persists.

  At the Recovery Console prompt, type which Suits, and then press ENTER:

  CHKDSK [/ p]: [/ r]

  Note: At first, try to run chkdsk/p & check if it helps. Later, you can run chkdsk/r.

  
  Reference: How to install and use the Windows XP Recovery Console

  To start the computer and use the Recovery Console

  Hope the helps of information.
  Please post back and we do know.

• Error: "one of the drives should be checked for consistency" to start the computer

  The original title: disk space

  My laptop is an Acer Aspire 5000 running with XP Home Edition. At a hard 100G drive with 2 partitions fat. Recursively shows problem at startup. The message displayed is "one of the drives should be checked for consistency. So when he was checked always check disk space and get stored at 41%. I tried to restore several times, but it is once again no place for a long time.

  Could you help me with this?

  Hi RodrigoGodinez,
   
  Sometimes the disk check always starts check the file system on one or more drives for consistency. If no button is pressed, the disk check is aborted. In fact, it is because a data structure of the disc or file is corrupted which can not be recovered and check disk always runs at Windows startup.
   
  Restart the computer and run the command chkdsk from the recovery console.
   
  To boot into the recovery console, see the following article:
  Description of the Windows XP Recovery Console for advanced users
   
  Additional reference on:
  Recovery Console overview
   
  For more information about the disk check, see:
  How to perform disk error checking in Windows XP
   
  Note: While running chkdsk on the drive if bad sectors are found on the hard drive when chkdsk attempts to repair this area so all available data on this risk to be lost.
   
  If the disk check done in start the computer every time, here is an article that could be useful for:
  Chkdsk.exe or Autochk.exe starts when you try to shut down or restart your computer

• Check the disk for consistency

  I read messages will this question hide two to five years. I guess my problem is the same: black screen on startup with white 'BACK', writes, "one of your disks needs to be checked for consistency. You can cancel the disk check, but it is strongly recommended that you continue. Windows will now check the disk. "What has happened three times in the last two months, and nothing was found in the mess at the end of the audit.

  Responses to previous posts are frankly discouraging - at least for me. I want to know is if this disk check is a signal that all is not well with the computer, or if it's just a gene that will probably calm down. Would it not be in my interest to call a repairman? I'm not interested in venturing into the only registry.

  Thank you.

  There is nothing remarkable or unusual in the chkdsk report, no bad sectors or the reported bad clusters.  Run the utility of diagnosis of the constructor on the drive and see if it reports disk problems, go to the web site of the manufacturer of the drive for the utility.

  John

• OBIEE 10 G remove unwanted objects causing error in declaration of the Manager to check the repository consistency

  Hello

  I installed 10 G OBIEE and open the Administration tool to open the repository online default 'AnalyticsWeb '. I'm new to OBI so I know that maybe this isn't the right way to create a new repository. But anyway, I opened the online repository, created my own business (physical, MDB, presentation layers) and tested without problem. So I decided to remove unnecessary items (dirty Sample) in AnalyticsWeb. I chose 'File' - 'copy' to generate a copy of the current repository. Then, I opened this replica in offline and deleted all not created by me in three layers. But when I save it, the reporting error of Manager to check the consistency regarding something in deleted things.

  This is the error message, but Customers and Orders should have been deleted already.

  ERRORS:

  GLOBAL:

  Target [38058] "Customers" is not a catalog of primary segmentation.

  Target [38058] level "Orders" is not a catalog of primary segmentation.

  Laughing out loud

  Do not use the Remove option.

• Whenever I wrote something on Firefox, it is used to check the spelling. But now Firefox doesn't check spelling. How can I turn it back on?

  Firefox used to check the spelling on everything I wrote. But since the upgrade to version 10.0.2, I don't see no Redline under the wrong words and no suggestion of spelling when I right click on the words.

  When you type something like these messages, right click, then select check spelling. You can also enable the option in the Advanced menu panel - accessibility, navigation, network, updates and other settings in advanced Firefox

  You probably already have the required dictionary (if you do a regular upgrade, Firefox should not change language version) otherwise, see https://addons.mozilla.org/en-US/firefox/language-tools/

• My Apple Macbook late 2009 has been upgraded to 4 GB and Mountain Lion but runs very slowly. When I check the memory system activity monitor, I see that there are 1.6 GB inactive. Is this the cause of the slowness and what I can do?

  My Apple Macbook late 2009 has been upgraded to 4 GB and Mountain Lion but runs very slowly. When I check the memory system activity monitor, I see that there are 1.6 GB inactive. Is this the cause of the slowness and what I can do?

  Reinstall OS X from scratch and add more RAM.

  Ways to help make a slow Mac faster

  17 reasons why your Mac runs slower than expected

  Slow performance of Mac? This Article addresses!

  Difficulty of slow start in OS X | MacFixIt - CNET Reviews

  6 easy tips to speed up OS X Yosemite on your Mac.

  Avoid using third-party software that claims to clean your computer. This software does more harm than good. In addition, you don't need it. Note that all computers become slower over time even in the normal conditions of use. Generally, the experienced users erasing the hard drive and do a clean install from scratch at least once a year or every time that the installation of a major upgrade of the OS. Well sure doing so also means that you need to maintain regular and several backups.

  Add more RAM or reduce the number of simultaneously executed from applications and utilities. Remove unnecessary software such as anti-malware and that promises to clean your Mac. Look for the runaway process: Runaway applications can shorten the battery life, affect performance and increase the heat and fan acti... See also:

  Before Mavericks

  Open the activity monitor in the Utilities folder.  Select all processes in the drop process .  Click the % CPU column heading twice to display in descending order.  If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  Mavericks and later versions

  Open the activity monitor in the Utilities folder.  Select all processes in the menu display .  Click the CPU tab in the toolbar. Click the % CPU column heading twice to display in descending order.  If you find a process that uses a large amount of CPU %, then select the process, then click on the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  Things you can do to solve the slow Downs

  If your computer seems to run slower, here are some things you can do:

  Start with tours: OS X maintenance - MacAttorney;

  The X Lab: the X-frequently asked questions.

  " Safe mac" Mac Performance Guide;

  " Safe mac" the myth of the dirty Mac;

  Maintenance fast Mac Help.

  Start in Safe Mode , and then repair your hard disk and permissions:

  Fix the hard disk and permissions before Lion

  Boot from your OS X install disk. After the installer loads, choose your language and click on the button continue. When the menu bar appears select utility drive in the Utilities menu. After that the charges of THE select your entry from hard drive (mfgr. ID and car size) in the list on the left.  In the status area, you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is faulty or has failed. (State SMART is not reported on external drives Firewire or USB). If the drive is "verified", then select your OS X volume in the list on the left (subentries under the entry for the road), click the first aid tab, then click the repair disk button. If THE reports any errors that have been corrected, and then run repair disk again until no errors are reported. If no errors are reported, click repair permissions. Wait until the operation is complete, then exit FROM and return to the installer.

  Repair the hard drive - Lion-Lion/mountain/Mavericks

  HD recovery start:

  Restart the computer and after the buzzer, press on and hold down the COMMAND and R until it appears the screen of Menu utilities. Otherwise, restart the computer and after the buzzer, press on and hold down the OPTION key until the Boot Manager screen. Select recovery HD disk icon and click on the button below.

  When the recovery menu appears, select disk utility. After that the charges of THE select your entry from hard drive (mfgr. ID and car size) in the list on the left.  In the status area, you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is faulty or has failed. (State SMART is not reported on external drives Firewire or USB). If the drive is "verified", then select your OS X volume in the list on the left (subentries under the entry for the road), click the first aid tab, then click the repair disk button. If THE reports any errors that have been corrected, and then run repair disk again until no errors are reported. If no error is not reported, then click repair permissions. Wait until the operation is complete, then exit FROM and return to the main menu. Select restart from the Apple menu.

  Restart your computer normally and see if it helped at all. Then do little maintenance:

  For disk utility can't handle situations, the best third party is Disk Warriorutility;  Fixed DW only for problems with the disk directory, but most disk problems are caused by the corruption of directory; Warrior drive 4.x is now compatible with Intel Mac.

  Note: Alsoft ships DW on a bootable DVD that will boot Mac running Snow Leopard or earlier. He cannot start Mac that came with Lion or later preinstalled, however, DW will work on these models.

  Suggestions for OS X maintenance

  OS X performs certain maintenance functions that are supposed to take place on a daily, weekly, or monthly period. Maintenance scripts that are run at the beginning AM only if the computer is turned on 24/7 (no sleep). If this isn't the case, then a great solution is to download and install a shareware like Macaroni, JAW PseudoAnacronor Anacron utility that will automate the maintenance regardless of whether activity if the computer is off or asleep.  Dependence on third-party utilities to run periodic maintenance scripts has been significantly reduced since Tiger.  These utilities have little or no functionality with Snow Leopard or later version, and must not be installed.

  OS X automatically defrags files smaller than 20 MB in size, so unless you have a disk full of very large files it little need to defragment the hard drive.

  Under no circumstances should you install operating MacPaw or ZeoBit software (CleanMyMac/CleanMyDrive or Mac Keeper, respectively.) You don't need special software to keep your computer.

  Useful links about malware Protection

  "If you have an immediate problem with ads popping up see the Mac without danger" Adware removal Guide and AdwareMedic.

  Open Safari, select Preferences from the Safari menu. Click the Extensions icon in the toolbar. Disable all Extensions. If it stops your problem, then re-enable one by one until the problem returns. Now remove this extension as it is the origin of the problem.

  The following comes from user stevejobsfan0123. I made minor changes to adapt to this presentation.

  Difficulty a few pop ups browser that supported Safari

  Common pop - ups include a message saying that the Government has taken over your computer and you pay release (often called "Moneypak"), or a false message saying that your computer has been infected and you need to call a number of tech support (sometimes claiming to be Apple) to get it to be resolved. First of all, understand that these pop-ups are not caused by a virus and that your computer has not been assigned. This "hack" is limited to your web browser. Also understand that these messages are scams, so don't pay not money, call number, or provide personal information. This article will give an overview of the solution to remove the pop-up window.

  Quit Safari

  Usually, these pop-ups will not go by clicking 'OK' or 'Cancel '. In addition, several menus in the menu bar may become disabled and show in grey, including the option to leave Safari. You'll probably force quit Safari. To do this, press command + option + ESC, select Safari, press on force quit.

  Relaunch Safari

  If you restart Safari, the page will reopen. To avoid this, hold the "Shift" key when opening Safari. This will prevent windows since the last time that Safari was running since the reopening.

  It will not work in all cases. The SHIFT key must be maintained at the right time, and in some cases, even if done correctly, the window is displayed again. In these circumstances, after force quit Safari, turn off Wi - Fi or disconnect Ethernet, depending on how you connect to the Internet. Then restart Safari normally. He'll try to reload the malicious Web page, but without a connection, it will not be able to. Leave this page by entering a different URL, i.e. www.apple.com and try to load it. Now you can reconnect to the Internet and the page that you entered is displayed rather than the malicious.

  An excellent link to read is Tom Reed Mac Guide of malicious programs.

  Also, visit the FAQ XLab and read of detection and avoid malicious software and spyware.

  Check out these articles from Apple:

  Mac OS X Snow Leopard and malware detection

  OS X Lion-Protect your Mac against malicious software

  OS X Lion mountain - protect your Mac against malicious software

  OS X Mavericks-Protect your Mac against malicious software

  On the quarantine of file under OS X

  If you need antivirus protection Thomas Reed recommends to use ClamXAV. (Thanks to Thomas Reed to this recommendation.)

  The user Joe Bailey comes this equally useful advice:

  The facts are:

  1. There is no anti-malware software can detect 100% of malware out there.

  2. There is no anti-malware that can detect all targeting the Mac.

  3. the best way to prevent breaches the most is for you as the user is aware that

  the most successful malware attacks rely on sophisticated social engineering

  techniques preying on human greed, * and fear.

  4 Internet pop-up windows telling the FBI, NSA, Microsoft, your ISP has detected malware on

  your computer is designed to trick you into installing their malware thinking it's a

  protection against malware.

  5. some of the anti-malware market products are worse than malware

  go where they are supposed to protect you.

  6. be careful where you go on the internet.

  7. don't download anything from sites, you know are safe.

  8 avoid links that you receive in email, always be wary, even if you get something

  you think a friend is, but that you did not expect.

  9. If there is any question in your mind, then assume that it is malware.

  Troubleshooting Applications

  I recommend that you download a utility such as TinkerTool System, OnyX, Mavericks Cache Cleaneror hiding a Cocktail that you can use to delete the former newspapers and archives, cleaning, etc. Corrupted cache, logs or temporary files can slow down the application or OS X crashes and panics of the kernel.

  If you have leopard snow or leopard, then for similar repairs install Applejackfreeware utility.  If you do not start in OS X, you can boot into single-user mode , where you can run Applejack to make a set of routines for repair and maintenance of the command line.  Note that it takes 1.5 AppleJack for Leopard. AppleJack 1.6 is compatible with Snow Leopard. Applejack does not work with Lion and later versions.

  Basic backup

  For some people, Time Machine will be more than enough. Time Machine is part of Mac OS X. There are two components:

  1. a panel of Time Machine preferences as part of the system of preferences;

  2. a request for Time Machine, located in the Applications folder. It's

  used to manage backups and restore backups. Time Machine

  requires a backup drive that is at least twice the capacity of the

  drive being backed up.

  You can also get an external drive at least equal to the size hard disk internal and make (and maintain) a bootable clone/backup. You can make a bootable clone using the disk utility's restore option. You can also create and maintain clones with good backup software. My personal recommendations are (the order is not significant):

  1 Carbon Copy clone

  2. get backup

  3 already seen

  4 superDuper!

  5. Synk Pro

  6. Tri-Backup

  Visit The FAQ XLab and read the FAQ on the backup and restore.  Also read How to back up and restore your files. For using Time Machine, visit FAQ Time Machine of Pondini for help with all this time Machine.

  Referenced software can be found at MacUpdate .

  Additional tips

  Make sure you have a sufficient amount of RAM installed for the number of applications you run simultaneously. Make sure to leave a minimum of 10% of the capacity of the hard disk as free space.

  Add more RAM. If your computer less than 2 GB of RAM and you use OS X Leopard or later, then you can do it with more RAM. Snow Leopard and Lion works much better with 4 GB of RAM that is their system. Most concurrent applications, that you tend to use the more RAM you should have.

  Always have at least 15 GB, or 10% of the capacity of your hard disk as free space, the largest. OS X frequently accesses your hard disk, so offering enough free space will keep things slow down.

  Check for applications that may be hogging the CPU:

  Before Mavericks

  Open the activity monitor in the Utilities folder.  Select all processes in the drop process .  Click the % CPU column heading twice to display in descending order.  If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  Mavericks and later versions

  Open the activity monitor in the Utilities folder.  Select all processes in the menu display .  Click the CPU tab in the toolbar. Click the % CPU column heading twice to display in descending order.  If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  This problem occurs often because of a corrupted cache or the preferences file or an attempt to write in a corrupted log file.

• Check the motor rotation speed

  Dear all

  I am currently working on an engine test bench; the charge of the engine rotation speed of equipment no longer works and I need to check the engine with Labview

  My problem is that the software I did may not make the engine works regularly

  I made a loop with a detection of error between the actual rotation and orderly and add it to the rotation of entry and continue the loop

  The problem is that when the engine tries to reach the value of voltage controlled for pedal, it will happen very quickly and exceed the desired rotation, then he must come down and fall below the necessary rotation and it will continue...

  Please let me know your opinion

  The best

  I made a loop with a detection of error between the actual rotation and orderly and add it to the rotation of entry

  Without going into too much detail...

  Rather than add the complete of the error for the control signal, try adding a fraction of the error (for example, start par.5.  Lowering of the fraction should translate into less discount gas, but will take more time to achieve the desired set temperature.  If you don't know any with the PID that is comparable to tuning the term "proportional".

  Best regards

• Is the function of the regular Expression

  Hi guys, using this model, I got this error:

  -4600 error has occurred during the regular expression match.

  I have attached the VI.

  can you help me? Thank you

  inuyasha84 wrote:

  Hi well I want to save (create) a file and do a check to see if the new file that I want to create already exists or not. If the idea was to see if the path of the new file is equal to the old path

  Why not just use 'check if the file or folder exists? (E/s files-> Adv file functions)

  Cameron

• Check the disc 'coherence' at startup about 3 times now (no more)

  Hello, I had a strange thing that I don't understand occur several times (3) start-up called "checking disk consistency." I am a moderately (or less) located user. I have windows XP: (, IE8, 32 - bit, SP3, hmm, that's all I think.) I would just know what that means and if there is anything I can do to fix (prefferably for free). Thank you very much!

  If you want to see if your volume/drive is 'dirty', why not just do this:

  Click Start, run and enter in the box:

  cmd

  Click OK to open the command prompt window.

  For example, to query the bit of impurity on drive C, type:

  fsutil dirty query C:

  The sample output:
  Volume c is dirty
  Volume C: is dirty

  Is your disc dirty or it is not dirty?

  Type "exit" to close the command prompt window.

  The reason is to try to understand why it comes randomly as chkdsk runs only if the disc dirty but the oringal title is: check the disc 'coherence' at startup about 3 times now (no more)

  I want to know why it happens sometimes and not

• the windows XP from my laptop IBM + enter in standby mode without anything in the regular workplace? any idea what can cause this problem? virus? installation program?

  the windows XP from my laptop IBM + enter in standby mode without anything in the regular workplace? any idea what can cause this problem? virus? installation program?

  Hello

  · Were there any changes made on the computer before the show?

  You can check the link: how to solve the problems of hibernation and standby in Windows XP: http://support.microsoft.com/kb/907477

• my printer prints in a weird format from the internet. Looks like lines of script rather than the regular format. any suggestions?

  Every time I have print an article from Internet Explorer, it prints like this...

  I don't know much about computers, but for me, it looks like lines of script.  Why it is not printing in regular format?  What can I do to fix this?

  Thank you!

  From my research, the problem may occur if IE7 isn't the web browser by default. I understand that you have tried to define default IE7. At this point, please follow the steps below to check if it:

  Step 1: Set default IE7 in IE options
  ========
  1. open Internet Explorer Page

  2. click on tools (usually in the upper right corner) and go down to Internet Options

  3 switch to the tab programs, click "Make default" under "Web browser by default" if IE is currently not the default browser.
  4. click on OK.

  Step 2: Set IE as default in Set Program Access and computer defaults
  ========
  1. click on start, and then click default programs (you can find it in the control panel if you do not have a shortcut on the start menu)
  2. click on "set program access and computer by default.
  3. Select custom, and then click to expand the options.
  4. Select "Internet Explorer" as default web browser, and then click OK.

  Step 3: Check the associated registry key
  ========
  1. Click Start, type regedit in the search box and press ENTER.
  2. navigate to the following key:

  Mand HKEY_CLASSES_ROOT\InternetShortcut\Shell\print\com

  3. in the right pane, check that the (default) value data are defined as follows:

  "C:\Windows\System32\rundll32.exe" "C:\Windows\System32\mshtml.dll",PrintHTML "%1"

  4. exit the registry editor.

  Then, restart the computer in order to check the result.

  Source: http://www.technibble.com/forums/archive/index.php/t-6882.html

• CD-ROM/DVD-ROM is missing after disabling the Jmicron RAID

  My computer ran with raid jmicron and which does not allow playback of DVDs or write, so after that I upgraded from my hard drive to 500 GB for a 1 TB HARD drive I changed from IDE to AHCI and disabled the jmicron raid so I had to install a new copy of windows from usb.

  Without the jmicron raid, windows does not detect my CD-ROM/DVD-Rom device.

  The DVD/CD drive does not appear in the Bios or Device Manager.

  64-bit Windows 7 Home Premium

  Hello

  Thank you for the update.

  I'm sorry for the late reply.

  I suggest you try using the steps described in this article and check the issue.
  Reference:
  Error: A required CD/DVD device driver is missing - when you boot Windows 7 or Windows Vista installation disc
  http://Support2.Microsoft.com/kb/952951

  Note: Changing the BIOS / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Please keep us informed of the status of the issue.

  Thank you