Check the disc 'coherence' at startup about 3 times now (no more)

Similar Questions

• How can I check the disc for physical integrity on Satellite P305?

  I have P305-S8838.

  I had some freezing problems earlier this month, and on the notice here, I nu start-up and reduced services a little at a time.
  Now, I have a few more crash but don't know if it's a physical disk problem.

  For example... I have run CHKDSK and does many things and happens at the exact same spot and hangs at step 4 file 5 3498 or 421168 processed.

  I tried to run CHKDSK in SafeMode but tells me drive is locked and it will run when I restart. But the restart put back me in normal mode and get the same hang.

  Now, for more suspicion of a physical problem. I tried to make a disk image with ACronis and same problem occurs because he says impossible to reading data 226 964, 072 sector and ask if I want to ignore and continue. I say yes to everything. Log shows he made about three of these attempts and crashes.

  I ran sfc/scannow and it says found problems that he was unable to fix. The newspaper isn't so long and complex course that all means. I could send these log files if someone can help me understand.

  I ran the test of memory OK.

  I if I could put in DVD Toshiba and certain diagnoses, but when I put in the disk I get this big warning I'll crush, etc and I have chicken.

  This didn't stop me to use the computer, but its all irritating.

  How can I check the disc for physical integrity?

  Bob

  Hello

  He idea goo to check the HARD disk and run some diagnostic procedures.
  For this, I recommend the freeware tool called Drive Fitness Test.
  It allows you to check the HARD disk for certain physical defects.

  Google for this tool. You can get it from multiple pages download

• HP Recovery Manager doesn't have to check the disc 1 what to do? Help, please

  Hello I have computer laptop hp pavilion notebook pc... g6 but it contains no disk recovery and whenever I have create recoverry Recovery Disk Manager, he did not check the disc 1 and show the message "insert another disc" it happen again and again... Please tell me what to do... i seriouslly want recovery disk

  Hello

  I would contact HP (the telephone number can be found on the corresponding link below) and explain that the Recovery Media Creator is unable to create a viable set of recovery disks and ask that they send you a free replacement of disks together.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  Kind regards

  DP - K

• I am trying to reinstall vista on another laptop and when I get to the last step (end Installation...) it stops, about 70% of the way through. Now what? I tried to repeat the process about 6 times now!

  I am trying to reinstall vista on another laptop and when I get to the last step (end Installation...) it stops, about 70% of the way through.  Now what? I tried to repeat the process about 6 times now!

  Sorry for the confusion.  I must be useless to English.

  Forget the two laptops.
  I have a problem with a laptop that I tell you all (the Inspiron 1720).
  The disc that I use is labeled as a Windows Vista reinstall disk and provided with the computer when I bought it.  I'm not trying to use it on another computer.

  Reference Dell it is a problem with a process of recovery of Windows and, therefore, a problem of Microsoft.

  See you soon

  Problems with the Dell restore process, contact Dell.
  Dell wrote their recovery process and provided you with this DVD, NOT Microsoft...

  It is their software.

  Ask them for a different recovery DVDs.

  You say that the hard drive has failed.

  He could have more than just tough that failed.
  You can have other hardware issues.

  Hardware issues are beyond the scope of these Forums.

  Good luck with Dell.

  See you soon. Mick Murphy - Microsoft partner

• How to check the total memory used by Oracle and user who use more memo

  Hello
  
  I use oracle 10.2.0.4 on Windows 2003 server SP2 version.
  
  1. How can I check the "total memory" used by Oracle
  
  2. which users use more CPU resources.
  
  Thanks and greetings
  Amit

  Hello

  Oracle EM is the best to identify the use of the processor and memory used by each session.

  In addition, use after query to calculate the memory used by each session of the.

  SELECT to_char (ssn.sid, '9999') | ' - ' || NVL (ssn.username, nvl (bgp.name, 'background')) |
  NVL (Lower (SSN.machine), ins.host_name) "SESSION."
  TO_CHAR (prc.spid, '999999999') ' PID/THREAD. "
  TO_CHAR ((se1.value/1024) / 1024, '999G999G990D00'). "MO" "SIZE."
  TO_CHAR ((se2.value/1024) / 1024, '999G999G990D00'). "MO" 'MAXIMUM SIZE '.
  V $ sesstat se1, v$ sesstat se2, v$ session ssn, v$ bgprocess bgp, v$ process RPC.
  v$ ins instance, v$ statname stat1, v$ statname stat2
  WHERE se1.statistic # = stat1.statistic # and stat1.name = 'pga session in memory.
  AND se2.statistic # = stat2.statistic # and stat2.name = 'pga memory max session'
  AND se1.sid = ssn.sid
  AND se2.sid = ssn.sid
  AND ssn.paddr = bgp.paddr (+)
  AND ssn.paddr = prc.addr (+);

  Kind regards
  Charrier

• App Store says my ID Apple is locked, but I registered in and changed the password about 5 times now.

  I get the message, "your ID Apple is locked," when I try to update an application or download an application from the App store.  I went to 'iforgo' t and connected and changed my password several times now because it says that my account is unlocked, but it's not. I can enter and edit information, etc.  It is locked only when it has to do with a "provider" type of action. I tried to buy a song on itunes and who also says that my account is locked.  It seems to do with purchases.  I've been using Paypal and I recently had an unauthorized purchase, so I unplugged my PayPal account. My money was refunded by apple for this unauthorized purchase. I think that this is where my troubles all started.  I re-checked PayPal and set up to be reused, but it says that my Apple ID has been locked.  So I changed my payment method for a credit card and checked that.  My Apple ID is always locked when I try to do an itunes buy or update an app on the app store.  I re-entered my password on my ipad via the settings area, but nothing seems to work.  He'll take my password and everything seems fine until I try to make a purchase or update applications.

  Since the change of your password you have connected off and on the account in the world you use: what to do when you have changed your Apple ID email address or password - Apple support ?

  If that is not set then contact iTunes Support and see if they can / will reactivate: http://www.apple.com/support/itunes/contact/

• My homepage will not remain as I want even if only I changed it the way it is said about 20 times. It will continue to go back to a search page.

  My homepage will not stay as my home page. As soon as I close and Open firefox again it goes back to a search like google page, but it's not google. Summer goes for about 5 days now and its really frustrating.

  See also:

  • http://KB.mozillazine.org/Preferences_not_saved
  • https://support.Mozilla.com/kb/preferences+are+not+saved

• Check the disc starts at Windows startup

  Original title: Check Disk

  Check disc runs automatically at startup upward and can run up to 20 minutes.  How and where I can turn so wide?

  Hello

  Perform the steps in the article and see if the problem persists.

  http://support.Microsoft.com/kb/831426

  Hope that helps.

• Check the disc automatically cancels

  I need to do a system restore but it says I have errors on C:. When I try to fix them it says that I can't fix a disk that rotates and I need to schedule a check disk for the next startup and make. When it starts the disk check semes start but immediately said that it has been revoked. Then, the computer will continue to boot normally. I tried to do this in safe mode and the same thing happens.

  I need to do a system restore but it says I have errors on C:. When I try to fix them it says that I can't fix a disk that rotates and I need to schedule a check disk for the next startup and make. When it starts the disk check semes start but immediately said that it has been revoked. Then, the computer will continue to boot normally. I tried to do this in safe mode and the same thing happens.

  Hey Hazufrazen

  There are a few tips on this in the tutorial below

  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  Walter, the time zone traveller

• code 643 I uninstalled net framework 1.1 because it is impossible to install the service pack to update about 50 times, I installed framework 3.5 and the update service pack 3.5 but when I check for the update the continuous 1.1 showing _

  I uninstalled 1.1, I used the widows clean program I played with this days and everything I have tried and nothing don't market my dad has same problem on his computer

  jeffkoch1,
  Take a look at this thread.  She treats the error that you are experiencing and there are several steps to take to resolve it.
  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Solutions error checking the disk and Restore Point, pointing to the other.

  Yesterday, my wife picked up the package of virus Security Suite from somewhere and remove, I picked up an error when the disk check runs at startup. Check disk claims it is an error, check the drive and suggests restore since my last restore point. But when I do this, restore the system claims I have a disk error and I need to run the disk check. Which brings me right to the beginning of this problem.

  I'm running 32-bit Windows 7 Home Premium, and have enabled the Windows updates. I use AVG and Malware Bytes to protect my system.

  Thank you!

  Bill Haworth

  You can run check disk from safe mode? This is a level of command prompt:
   
  CHKDSK x: /F /R
   
  Where x: is the drive that you control.
   
  "bill_haworth" wrote in message news: 9c836e2b-b164-44a7-b516-5d5302cca9bf...
  > Yesterday, my wife picked up the package of Security Suite virus from
  > somewhere and back, I picked up an error when running the disk check to
  > start. Check the disk says there is an error, check the drive and
  > suggests restore since my last restore point. But when I do
  >, System Restore claims I have a disk error and I need to run
  > Check the disc. Which brings me right to the beginning of this problem.
  >
  > I am running 32-bit Windows 7 Home Premium, and made Windows updates
  > on. I use AVG and Malware Bytes to protect my system.
  >
  >
  >
  > Thank you!
  >
  > Bill Haworth
  >
   
   

• How OSX decides where on the disc to begin to write

  Location:

  NTFS formatted disk is connected to the Max OSX - "erased" HFS format.

  This stage just implements the structures on the disk.

  1 TB of data NTFS - disc is 4 TB.

  Question:

  How to decide where on the disc to start writing about OSX?

  is the HFS "erase" (formatting) declare where beginning of file system is? ".

  how he decides where this start must be?

  is it important that he sees data NTFS (although the orphans) and there are a LOT of free space - he would use free space?

  Thank you

  You cannot format a partition with two file systems - one per partition, use the data NTFS and Mac as well on the same disk, you need to create two partitions on the disk. One will be formatted to NTFS and the other will be formatted HFS + Journaled. You live when a file is saved. OS X does not have to decide whether a file is NTFS or Mac.

  In regards to the Mac OS X can only read NTFS. He cannot write it without the help of a third-party software.

• Check the disk continues to run when I turn on my computer

  Whenever I turn on my computer. Check the disc is still running. I have let it run before and I restart my computer and it works again. When I let the program run, he never finds anything and it's getting boring. Can anyone?

  Whenever I turn on my computer. Check the disc is still running. I have let it run before and I restart my computer and it works again. When I let the program run, he never finds anything and it's getting boring. Can anyone?

  1. click on the start menu and open the Run dialog box.

  2. Type "cmd" and back (Note: don't enter quotation marks)

  3. then type "fsutil dirty query c:."

  4. If the returned message indicates that the volume is dirty, proceed to step 5

  5. then type "chkdsk c:/f/x.

  6. after that finshes repeat step 3.

  7. If it is no longer dirty then reboot and the problem should be solved.

  If you continue to receive the drive guest check after completing the above steps follow the instructions HERE

• Error occurred in making the disc of recovery with Dell backup and recovery

  Mr President.

  When I was doing a System recovery DVD with Dell backup and recovery when all steps were completed and finally when he was checking the disc a dialog box appears showing "AN ERROR has OCCURRED". How to get rid of this error?

  Please answer fast. Any suggestions will be appreciated

  Thank you

  Hey Himanshu Teli,

  Please provide the model of your operating system and Dell. I would also recommend that you try a flash instead of a DVD disc.

• Check the disk for consistency

  I read messages will this question hide two to five years. I guess my problem is the same: black screen on startup with white 'BACK', writes, "one of your disks needs to be checked for consistency. You can cancel the disk check, but it is strongly recommended that you continue. Windows will now check the disk. "What has happened three times in the last two months, and nothing was found in the mess at the end of the audit.

  Responses to previous posts are frankly discouraging - at least for me. I want to know is if this disk check is a signal that all is not well with the computer, or if it's just a gene that will probably calm down. Would it not be in my interest to call a repairman? I'm not interested in venturing into the only registry.

  Thank you.

  There is nothing remarkable or unusual in the chkdsk report, no bad sectors or the reported bad clusters.  Run the utility of diagnosis of the constructor on the drive and see if it reports disk problems, go to the web site of the manufacturer of the drive for the utility.

  John