Printer saying cluttered but I checked the entire machine and there seems to be no jam anywhere

Similar Questions

• HP Color Laserjet 3600n: printer says ready, but none of the printing jobs

  So my printer worked very well; I need to fill my Cyan toner but has found a way to move that and print in black only. That worked for a while until this week. My printer cannot print; all jobs are located and there is an error message. Is it possible that my lack of Cyan takes a 'fee' If you want? I honestly don't know what else to do and it is imperative that this printer it works not just makes things easier for my situation of work in my office.

  Help! I rebooted I know how to stop the calibration, but the latter let him calibrate to see if that helps. Nothing.

  Hello, to test the connection type printing and make sure it is not the print job to disconnect from the network, restart the machine and try to print a circulation of internal test. If it works, then reconnect the network cable on back in and see if the work in Quebec will be printed. If it does not and shows the error, delete the task, restart the machine and try to print the same job or another job and see if it works. Basically, sounds like a 49 error situation.

  I hope this helps...

• How to reset the settings for spell check in word - it will not check the entire document and ignores the parts of it

  When press comes out to check for a new document, it is not highlight any misspellings or grammar and reading - 'Spelling and grammar verification.»  Has been ignored, text marked with "do not check spelling or grammar"".»  Actually, it checks the document and I don't know how to cancel it?

  Please repost on MS Office Word forum:
  http://answers.Microsoft.com/en-us/Office/Forum/word?page=1&tab=no

• I can not print from Firefox, but can all the other browsers and applications (such as MS Word, notepad, etc.). I get a misprint on the print monitor as if it was a problem of queue.

  This is a recent development, but I can not print anything in Firefox. Printing open normally, it's going to the right printer that works... I can print other browsers and applications. It acts like it is in queue and then a printing error occurs and it will not be printed. I closed and reopened Firefox, open in safe mode, cleaned cache/history/cookies and restarted twice. Nothing makes no difference. Also tried printing from the preview before print that had the same result. I can print all other browsers and applications without problem, so it must be within Firefox.

  See this:
  
  http://KB.mozillazine.org/Problems_printing_web_pages

• Internet Explorer starts and displays a web page saying the PC is locked and requires £100 to unlock, this page covers the entire screen and if there is no way to get away from this

  our laptop has two users. A user can log in and use internet via internet explorer or firefox. the other uses when connecting.  Internet Explore starts and displays a page web teling them in locked PC requires £100 to unlock, this page covers the entire screen and there is no way to get away from her. You must change user to operate using laptop computer

  * Original title - performance and security in Internet Explorer *.

  Hi Anthony,.
  Your computer is probably infected by a virus. Try following the steps in this virus/malware removal guide: http://www.selectrealsecurity.com/malware-removal-guide
  It contains instructions which will remove most malware infections. If you have any questions, just ask me. I hope this helps you.
  Brian

• A SCN for the entire database and the different SNA for the data files?

  DB Version: 11 g
  
  I always thought that there is a unique SCN for the database as a whole.
  A quote from the link below as
  When a control point is completed, Oracle stores the RCS individually in the control for each data file file
  http://www.dbapool.com/articles/1029200701.html
  
  
  What does that mean? There is a SNA for the entire database, and there are individual SCN for each data files?

  Well, unfortunately, the article says more bad than good things. Or if I can't call them wrong, they are rather confusing and rather than clear things for the reader, its making them appear to look more confused.

  First things, YVERT is used for read consistency (CR) mechanism and the backbone of the notion of Multiversioning. The control point is the mechanism to help that recovery is decided. Contrary to what said article, not any kind of checkpoints update both the data file and the control file, and also, there is not a type of them as well. In addition, the article says that the LAST_CHECKPOOINT is set to NULL, while its actually set to the infinity since it is not possible to detect the moment when the database is opened, that the last issue of control over the file would be. In the case of complete control point, this number is saved and is also associated with the toa Controlfile own database leader at the next startup. If this is not the case, there is an inconsistency in the stop_checkpoint of the data file and the stop_checkpoint reocrded in the control file, leading to a recovery of the instance.

  There are several types of control points. Similarly, there are several types of SNA as well. Without going into the details of these, IMO, the article simply means that when the control point write over a file passes, oracle updates the file checkpoint on it and this is recorded in the Controlifle. as well.

  HTH
  Aman...

• How to lift a picture in a document to print it without printing the entire document, and when I ask to print at 400%, how to tell me how many pages there are, and what's on them

  I have a pix of a quilt in a document. I would like to print the page of the document to 400% to allow me to see the quilt better. When I put in my percent effects, it prints the entire document and will not allow me to move to other pages. He says his p1 1. I take a class to make this quilt. I need this pix for the class.

  Have you tried to open the image in a new tab via the context menu and a middle - click on the Image of the view and the zoom of the image (Ctrl +)?

• My computer is slow and I checked the event viewer, and it says I have reached my limits of interruption of security.

  My computer is slow and I checked the event viewer, and it says I have reached my limits of interruption of security. I ran Netstat-no, but data flashed on the screen, but I can't freeze it at the screen to display the data. What keys down to hold the data on the screen to display it.
  Thank you, OTTO

  original title: interruption tcp/ip connect limits

  Hello

  Try the steps below and check if the problem persists.

  Step 1:

  Run the fix provided in the link below to reset TCP/IP and check if that helps.

  How to reset the Protocol Internet (TCP/IP)

  http://support.Microsoft.com/kb/299357

  Note:

  Step above contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

  Step 2:

  You can check the link provided below for more information on the use of Net command in Windows XP stat.

  Netstat

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/netstat.mspx?mfr=true

• Displaying electronic Windows Live Hotmail, how do you print only e-mail message & not the entire screen?

  Displaying electronic Windows Live Hotmail, how do you print only e-mail message & not the entire screen?

  Hello

  I suggest you to follow these steps and check if it works:

  a. Select the text you want to print.

  b. hold the Ctrl (control) key, and then press P.

  c. under the general tab, select expanded selection of pages.

  d. click apply and print.

  This example displays the text you have highlighted and also works for specific images.

  Let us know if it helps.

• My printer worked last time I needed. I lost my job in network with my computer. printer says wireless is on. where the buttons to turn on my wirelss on my computer which is asus

  my printer is not talk to my computer. hp300 is the printer and says it's on. where should I look on asus for the switch network

  Hi Kenny,

  I understand that your wireless printer has stopped working.

  The following links and see if it helps.

  Wireless printing Center

  http://www.HP.com/global/in/en/wireless/troubleshooting.html

  Why can I not print? :

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  I hope this helps!

• I want to print my Bill, but I get the message that I'm not allowed? I just paid my creditcard dads

  I want to print my Bill, but I get the message that I'm not allowed? I just paid my creditcard dads

  Hello

  Did you follow: print a receipt of payment or invoice for your subscription to creative cloud ?

  If problem persists, please contact customer service

  Kind regards

  Sheena

• I have a new hp running windows 8.1 in turn and have tried to install the adobe reader software.  The installer downloads (1) and I choose to run it, but it is just a blank screen appears.  I checked the Task Manager and it takes memory, but does nothing.

  I have a new hp running windows 8.1 in turn and have tried to install the adobe reader software.  The installer downloads (1) and I choose to run it, but it is just a blank screen appears.  I checked the Task Manager and it takes memory, but does nothing.  After you let it run for 3-4 minutes, I kill the task.  What can I do to get the player installed on this machine?  I tried using chrome, firefox, and explore and get the same results with everyone.

  Try the Installer http://get.adobe.com/reader/enterprise/ offline

• WMM edition error message - ' cannot publish to the specified location. Check the source files and the location is still available and that there is enough disk space. »

  I made a movie of 30 minutes or more in WMM, some of the videos that I imported I had to convert to wmv, to import into WMM. Once I went to publish the movie, after the publication of about 1%, an error message pops up saying something like "cannot publish to the specified location. Check the source files and the location is still available and that there is enough disk space. "I have 8 GB of free space on my hard drive and I tried to burn a cd on a dvd, and save to memory stick, none of them have worked, the same message is displayed even if they have sufficient space available. There is no red x in the videos or photos that I imported, so no files are missing. Some files have been moved when they were converted, but the movie plays well in WMM.  I want to export to is in my documents is therefore always available. I spent hours trying to figure this out and I I still don't know what the problem with it! Help! I've also spent a lot of time to their conversion to avi to see if this helped and the same message appeared again.

  What is the format of your source of debtor files and how did you convert
  TO WMV?

  I can only imagine that you are using Vista Movie Maker 6?

  It's not really about the location... error messages can be very cryptic...
  The error that you mentioned usually appears when the source files in the project
  are damaged or are not fully compatible with Movie Maker and made
  in a movie file cannot continue. In addition, large complex projects can cause
  in this issue.

  In some cases, it may be possible to record in DV - AVI, during registration as
  . WMV fails: the following article explains how to save... Publish it in film...
  6 machine and the graphic link shows where the option:

  Windows Vista - publish a movie in Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker

  The following chart shows where the DV - AVI option.
  http://www.Papajohn.org/IMGs/Vista-PublishToComputerChoices.jpg

  If the recording as long as DV - AVI fails... see the following articles:

  Movie Maker - problem resolution - "cannot record a movie.
  http://www.Papajohn.org/MovieMaker-issues-CantSaveMovie.html

  Windows Movie Maker error
  Cannot complete the Save Movie Wizard
  http://moviemakererror.blogspot.com/

  Several formats are apparently compatible with
  Movie Maker, but the most reliable choices are:

  Photos - bmp
  Video - wmv
  Audio - wav, wma, wmv

  Sometimes, it can help if you are going to... Tools / Options / Compatibility tab...
  and uncheck all filters.

• "Windows cannot connect to the printer. Make sure you typed the name correctly and that you are connected to the network. »

  I have a Windows Vista laptop. I usually have no problem printing over the network to my University Library. Then I bought a new Kodak printer to my apartment which I also configured to print wireless. For about a day, I could print from these two networks, depends on the location. Now, I can't print at the library. I am able to see all printers but when I try to 'Connect', it says "Windows cannot connect to the printer. Make sure you typed the name correctly and that you are connected to the network. "Word, printers of the University Library no longer appear in the list you choose to print. What should I do?

  Hello Lauren,

  Please take a look at this Microsoft article on "networked printer troubleshooting:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems
  I suggest to disable all security software, including firewalls, you have probably enabled or installed and then try to print again to see if that makes a difference:
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

• In Windows Mail, journal on security keeps popping up asking me to check the user name and password.

  Original title: "Windows Security".

  I have Vista Home Premium with SP 2. In Windows Mail, logon security keeps popping up asking me to check the user name and password. This happens from time to time for many months and I've always got to work but happened several times today.  I can sign in the server through my ISP and get email. In Windows mail, I confirmed that the name of username-password is the same that I connect through the ISP.  I can't front/send by email but receive in Windows mail.

  Server response: '-ERR [IN USE] account is locked by another session or for maintenance, try again.',

  So wait a while and try again later.  You can also go to their website and log on there to see if it works.

  Also try to compact and repair the database (see www.oehelp.com/WMUtil/)

  Steve