Check the Source of upgrade installs

Similar Questions

• WMM edition error message - ' cannot publish to the specified location. Check the source files and the location is still available and that there is enough disk space. »

  I made a movie of 30 minutes or more in WMM, some of the videos that I imported I had to convert to wmv, to import into WMM. Once I went to publish the movie, after the publication of about 1%, an error message pops up saying something like "cannot publish to the specified location. Check the source files and the location is still available and that there is enough disk space. "I have 8 GB of free space on my hard drive and I tried to burn a cd on a dvd, and save to memory stick, none of them have worked, the same message is displayed even if they have sufficient space available. There is no red x in the videos or photos that I imported, so no files are missing. Some files have been moved when they were converted, but the movie plays well in WMM.  I want to export to is in my documents is therefore always available. I spent hours trying to figure this out and I I still don't know what the problem with it! Help! I've also spent a lot of time to their conversion to avi to see if this helped and the same message appeared again.

  What is the format of your source of debtor files and how did you convert
  TO WMV?

  I can only imagine that you are using Vista Movie Maker 6?

  It's not really about the location... error messages can be very cryptic...
  The error that you mentioned usually appears when the source files in the project
  are damaged or are not fully compatible with Movie Maker and made
  in a movie file cannot continue. In addition, large complex projects can cause
  in this issue.

  In some cases, it may be possible to record in DV - AVI, during registration as
  . WMV fails: the following article explains how to save... Publish it in film...
  6 machine and the graphic link shows where the option:

  Windows Vista - publish a movie in Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker

  The following chart shows where the DV - AVI option.
  http://www.Papajohn.org/IMGs/Vista-PublishToComputerChoices.jpg

  If the recording as long as DV - AVI fails... see the following articles:

  Movie Maker - problem resolution - "cannot record a movie.
  http://www.Papajohn.org/MovieMaker-issues-CantSaveMovie.html

  Windows Movie Maker error
  Cannot complete the Save Movie Wizard
  http://moviemakererror.blogspot.com/

  Several formats are apparently compatible with
  Movie Maker, but the most reliable choices are:

  Photos - bmp
  Video - wmv
  Audio - wav, wma, wmv

  Sometimes, it can help if you are going to... Tools / Options / Compatibility tab...
  and uncheck all filters.

• The Vista Capable upgrade is free?

  Hello, guys. happy new year :)

  I was given an old laptop Sony Vaio with the logo "designed for Windows XP/Windows Vista Capable." The vehicle currently has 2 GB of RAM and the OEM XP Home is authentic.

  The former owner stayed with XP, but I need to upgrade to Vista because my applications do not support XP. I can't currently afford paid upgrades to 7/8.

  When I inserted DVD a friend Windows Vista Home Premium to XP, he refused the product key, written in the COA on the PC sticker. The COA is genuine with XP.

  So, am I eligible for Vista Home Premium or Basic?
  And how can I get a valid PK for the upgrade?

  P.S. I read a lot of contradictory statements on this subject, on Microsoft / OEM/Blogs/Forums various websites.
  Some say I must ask a PK on the MS site, which is impossible. Others say that I need a DVD of the OEM upgrade. Yet others that I need to buy a boxed version of Vista, which is stupid, because many said getting the free upgrade.

  I hope that someone knowledgeable enough Microsoft can erase this.

  Happy new year 2013!

  Hello

  Welcome to the community forums of Microsoft and thanks for posting the question. According to the description, you need to know if you can upgrade to Windows vista Windows XP for free. Please answer a few questions to refine the question.

  1. which product key you use to upgrade to Windows vista? You use the current Windows Vista product key?

  2. have you received a product key upgrade to Windows vista when the purchasal?

  The product key you enter can be used only for Windows XP. You must have a valid key for update for Windows Vista. If you do not have an upgrade license key provided by the manufacturer, you might not have to upgrade the operating system.

  You can contact Sony Vaio to check if you are available for the upgrade offer.

  Reference:
  http://eSupport.Sony.com/us/p/select-System.pl?model_type_group_id=10

  Alternatively, you can contact Microsoft to check the license and upgrade installation:

  How to contact a Microsoft Product Activation Center by phone

  http://support.Microsoft.com/kb/950929

  See also:

  Installation and reinstallation of Windows Vista

  http://Windows.Microsoft.com/en-us/Windows-Vista/installing-and-reinstalling-Windows-Vista#section_1

  Hope this information helps. Answer please if you have more information about our Windows operating system.

• Check the spelling of DW CS3 source code?

  I need to spell check text that is in the source code, in particular, in some tags "title". I use a very cool JQuery plugin that shows these great lives of the ToolTips when you hover over an item, BUT that means that the text of ToolTips in the 'title' of an image element.

  So, is there a way to spell check the source code? I have 27 of these tooltips and each is a paragraph on the length and a spelling correction source code would be this speed all this.

  Hello

  Sorry, but according to the DW help docs.

  The command check spelling ignores the attribute values and HTML tags.

  You can apply for a feature of adobe to the - https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform.

  PZ

• Query metadata ODI to find the source and the target table for Interface

  Hi Experts,
  
  Customer heading there source of EBS 11.5.10 in R12. They are BIApps ODI. 7952 version. Since then, all mappings there are customized they may not disturb on support of Oracle BIApps is concerned.
  Now, we need to know how many ODI mappings there source EBS is the 11.5.10 in R12 migration and we can only target mappings accordingly.
  
  So, please give me with entries below:
  
  (1) any request for metadata that will give me the information of the source tables table and target them in against an if-same interface that the source of the main interface is another interface.
  (2) what are the other stuffs that I need to look at from the point of view of the mapping changes when the source is upgrading.e.g. only change the source table is enough or I need to focus on other animals. I feel she's boiling down to create a separate source for R12 adapter.
  
  Kind regards
  Snehotosh

  First open the designer-> models and check which model has got the mapping of the eBS. Get this code with this TERRIBLE application

  SELECT count (distinct i_pop) of SNP_POP_COL
  where I_POP_COL in
  (
  Select i_pop_col in the SNP_POP_MAPPING where i_source_tab
  in
  (
  Select i_source_tab in the SNP_SOURCE_TAB where i_table in)
  Select i_table in the SNP_TABLE where I_MOD in
  (select i_mod in the SNP_MODEL where mod_name = "PUT_HERE_YOUR_NAME")
  )
  )
  );

  Will not consider some other influence (i.e. the procedure), it will be an indicator of average first level.

• Some keys on my MacPro keyboard have suddenly changed character. More precisely: move 2 product "instead of @;" Shift 3 product £ instead of a hashtag. and two RBI Maj @. I rebooted and checked the settings keyboard without result.

  Some keys on my MacPro keyboard have suddenly changed character. More precisely: move 2 product "instead of @;" Shift 3 product £ instead of a hashtag. and two RBI Maj @. I rebooted and checked the settings keyboard without result. It worked fine yesterday and has not been moved since then. What should do?

  Check the sources of the system/preferences/keyboard again.  You have active the British PC keyboard.  Remove it and make sure that you have only on the list.

• Is it possible to look at the source code of the waterfall?

  I m currently developing on BB10, and I wanted to see how some controller works to create my custom controller.

  Is it possible to check the source code?

  # Cascades is closed source, at least for now. Also some stay that way at least until the launch of BB10 (and, as far as I know, a decade after that).

• Session at which was the bulk operations (DML) during the period determined in the Source database?

  Hi all

  
  

  How to find which session was in bulk (DML) operations on a particular period in the Source database?

  
  

  The source database: SRCDB - version: 11.2.0.3 (2 node RAC on RHEL OS)

  Target database: TGTDB - version: 11.2.0.3 (Non-RAC)

  Source-> target (United directional Replicat use of Goldengate)

  
  

  In our (source) database, I have observed that some inserts in bulk / updates which happened and because of this corresponding Replicat, database was a delay to apply updates/insert and there was a lag (treatment gap) happened in the target database.

  When I checked the source database, I was unable to find that the session/SQL caused the bulk INSERT/UPDATE/DELETE (batch), since the transaction has already finished.

  1. is as possible to get the story SQL_ID or generated Session operations more Redo/DML

  for example: the current time is 11:00 and I need to get the session/caused sql operations dml in bulk between 09:00 and 11:00?

  2. when I checked the history of SQL (dba_hist_sqlstat) time-based CPU, I found some instructions update. But I was unable to find the update caused SQL more updates to a table.

  For example: -.

  Update t1 set attribut1 = 'XX' where SHIPMENT_GID =': p1' / * it has updated 100 rows * /.

  Update t1 set attribut1 = 'XX' attribut1 = "YY" where SHIPMENT_GID =': p2' / * it has updated 5000 lines * /.

  Please provide relevant SQL to identify in above cases...

  Kind regards

  Veera

  column MODULE format a15

  column BEGIN_INTERVAL_TIME format a25

  column END_INTERVAL_TIME format a25

  Select distinct from a.*

  (

  Select sql.snap_id, sql.module, sql.sql_id, decode(t.command_type,2,'INSERT',6,'UPDATE',7,'DELETE') cmd_type,

  s. BEGIN_INTERVAL_TIME, s. END_INTERVAL_TIME, sql. EXECUTIONS_TOTAL, sql. ROWS_PROCESSED_TOTAL,

  SQL. ELAPSED_TIME_TOTAL/1000000 "elapsed time (in seconds).

  of dba_hist_sqlstat sql, dba_hist_snapshot s, dba_hist_sqltext t where s.snap_id = sql.snap_id and sql.sql_id = t.sql_id

  and s.begin_interval_time BETWEEN to_date ('03 - Apr - 2013 16:00 "," dd-mon-yyyy hh24:mi:ss')

  AND to_date ('03 - Apr - 2013 17:00 "," dd-mon-yyyy hh24:mi:ss')

  and sql.sql_id

  IN

  (

  SELECT distinct stat.sql_id

  Of dba_hist_sqlstat stat

  JOIN dba_hist_sqltext txt ON (stat.sql_id = txt.sql_id)

  JOIN dba_hist_snapshot snap ON (stat.snap_id = snap.snap_id)

  WHERE the snap.begin_interval_time between to_date ('03 - Apr - 2013 16:00 "," dd-mon-yyyy hh24:mi:ss')

  AND to_date ('03 - Apr - 2013 17:00 "," dd-mon-yyyy hh24:mi:ss')

  AND txt.command_type in (2,6,7)

  )

  ) a.snap_id asc order

  ;

  I hope that this sql help.

  Kind regards

  Harman

• Is the price of upgrade available after the expiration of the 30 day trial?

  Hello

  I wanted to check the price of upgrade of the elements is available after the 30 day trial period, or must it be purchased before 30 days?

  See you soon

  You can buy at any time.

  30 days without fair trial limits your use of the software for 30 days.

  Most people decide yes or no within 30 days.

  When you purchase you can start the trial and click on serial number (sometimes called License this software) entry and enter your serial number.

  If you are in the United States, the price for the full version is currently the offer for US$ 55 cheaper than upgrading.

  Buying guide | Adobe Photoshop elements 14 vs. 13: 12

• Validation of the source of planning

  Gurus,
  I have a question about the validation of source EPM (Essbase/Planning).
  We have two different environment - DEV and PROD.
  Purpose of test, we made a change to the alias. Thus, the alias pointing to PROD will now point to DEV.
  So the question is "what are the different ways to validate and ensure that the alias is pointing now to DEV?
  
  There are several things we could check I think, for example, check the source in the workspace or planning. We could also check the DATA SOURCE for the reports. Is there another way to check what server applications are pointing to?
  
  We can also check the logs on the right? For example, in the essbase - hyperion/apps/appname/logs server.
  
  Any other suggestions?
  
  Thank you

  A simple test would be to stop the http server for example SST or workspace, and then use the URL of the workspace, if it does not work and worked before you stopped the service, then you know it routes properly.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Write data to the Source folder

  I'm trying to change part of a script that I use for work he entered into the source of a file folder, run on rather than to a specific folder (in this case, the office).  Can someone help me understand how to change and/or by adding the code below?

  create the reference to the csv file

  var file = new file (Folder.desktop + "/ Data.csv");

  Open the csv file in Add mode

  leader. Open ("e", "TEXT", "?");

  jump to the operating system in use on the line set

  ($.os.search(/windows/i)! = -1 ? file.lineFeed = 'windows': file.lineFeed = "macintosh";

  at the end of the file

  leader. Seek (0.2)

  write all the information required for the csv file

  Name of the document, Date1, database2, donnees3, etc.

  file.writeln (decodeURI (activeDocument.Name) + ","Data1","Data2","data3"," + data4. ") ToString()', '+ Data5.toString ());

  Close the csv file

  leader. Close();

  Now, I'm assuming that the part to change here is Folder.Desktop.  And I think I will need to change this option to be Folder.getFolderName.  getFolderName is a variable used in other code that checks the source directory of the current file.  This code of source directory, it's what I do not know how.  The script itself would have to do the check whenever it is running as I want him to be able to work with included subfolder of batch runs, make a new file in the subfolder when working with these files.  Anyone has any ideas, how to proceed?  Any help is very appreciated!

  dgolberg

  Edit: I forgot to mention; It would be nice if it can also store the name of the folder in which the source file is in a variable, so it can be written to the file as .csv.  This is not as important as the code mentioned above, but it would be helpful none-the-less, if possible.

  No problem, I was able to solve it on my own all the time.  I thought it would be much harder than it actually was. but has been able to do by simply changing

  var foldLoc = new File ("C:\\Temp\\");

  var file = new file (foldLoc + "/ Data.csv");

  TO

  var foldLoc = app.activeDocument.path;

  var file = new file (foldLoc + "/ Data.csv");

  and now, it records the data and the .csv file in the same folder as the currently open project.  Thanks for trying to help; It is much appreciated.

  dgolberg

• Can not upgrade Lightroom - ERROR: DS015: cannot read the target of the symbolic link to the source file

  Hello

  I'm trying to upgrade from Lightroom to the latest version on my last OS X 10.11 with all updates. The update fails with the error in the log:

  ERROR: DS015: cannot read the target of the symbolic link to the source file "/ Applications/Adobe Lightroom/Adobe Lightroom.app/Contents/Helpers/DynamicLinkMediaServer/application/dynamiclinkmediaserver.» app/Contents/amecommand.app/Contents/Dictionaries "Seq (30)"

  Please find attached the log.

  Thank you

  Dmitry

  26/07/16 15:26:48:532 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*

  26/07/16 15:26:48:532 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | START - Installer Session

  26/07/16 15:26:48:532 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*

  26/07/16 15:26:48:532 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Version of RIBS: 9.0.0.65

  26/07/16 15:26:48:533 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | The OSX version: 10.11.6

  26/07/16 15:26:48:533 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | : TIMER: [Total timer]

  26/07/16 15:26:48:533 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | CHECK: Single Instance

  26/07/16 15:26:48:533 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | CHECK: credentials

  26/07/16 15:26:48:533 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Load deployment file

  26/07/16 15:26:48:533 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | DeploymentFiles option not given

  26/07/16 15:26:48:533 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | CHECK: Another installer native OS already running

  26/07/16 15:26:48:533 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Create required folders

  26/07/16 15:26:48:533 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Assuming the installation mode

  26/07/16 15:26:48:533 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Search for path source install

  26/07/16 15:26:48:533 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Media Sync DB...

  26/07/16 15:26:48:533 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | : TIMER: [synchronize media DB]

  26/07/16 15:26:48:533 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Pre check media db sync

  26/07/16 15:26:48:533 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | End of pre check media db sync. Exit code: 0

  26/07/16 15:26:48:533 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | : TIMER END: [media DB Sync] had 32 milliseconds (0.032 seconds) DTR = 15625 Kbps (15,2588 Mbps)

  26/07/16 15:26:48:533 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Ready to initialize the session started by...

  26/07/16 15:26:48:533 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | : TIMER: [CreatePayloadSession]

  26/07/16 15:26:48:533 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | -START - updated media Sources - BEGIN-

  26/07/16 15:26:48:533 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Update source path: /Users/username/Library/Caches/Adobe/AAMUpdater/AdobeLightroom-6.0/6.6.1

  26/07/16 15:26:48:533 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Update media info for: {2C8CD39F-7A83-5516-B0CA-71BA5E60E7EF}

  26/07/16 15:26:48:534 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Ignoring the original being local installation source data

  26/07/16 15:26:48:534 | [INFO] |  | OOBE. OF |  |  |  | 2179470 |   Type: order 0, volume: 1, name of media: Lightroom 6

  26/07/16 15:26:48:534 | [INFO] |  | OOBE. OF |  |  |  | 2179470 |   Path: /Users/username/Library/Caches/Adobe/AAMUpdater/AdobeLightroom-6.0/6.6.1/payloads/AdobeLi ghtroom6-mul-210716042246/AdobeLightroom6-mul - 210716042246.zip

  26/07/16 15:26:48:534 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | -Updated media Sources - the END-

  26/07/16 15:26:48:539 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Support for the version of COAST range: [0.0.0.0,9.0.0.65]

  26/07/16 15:26:48:539 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | -CreatePayloadSession: the machine is x 86-

  26/07/16 15:26:48:540 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | _ Check _ subscribers dependence

  26/07/16 15:26:48:541 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Order of operation BEGIN all the payloads of session: library (requires, satisfied)

  26/07/16 15:26:48:541 | [INFO] |  | OOBE. OF |  |  |  | 2179470 |   Adobe Lightroom_6.6.1_AdobeLightroom6 - mul 6.6.1.0 {2C8CD39F-7A83-5516-B0CA-71BA5E60E7EF}: 0 (0.0)

  26/07/16 15:26:48:541 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | COMPLETE the operation order for all the payloads of session: library (requires, satisfied)

  26/07/16 15:26:48:541 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Patch Adobe Lightroom_6.6.1_AdobeLightroom6 - mul 6.6.1.0 {2C8CD39F-7A83-5516-B0CA-71BA5E60E7EF} can be applied to the product Adobe Lightroom 6.0.0.0 {8048A5DF-8A70-5BE1-954B-E0FDE1BD0D0D}

  26/07/16 15:26:48:636 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Setting the property "conflictingProcessInfo": /tmp/6800FD8F-2255-41DB-BDAC-3E2051C4867E/95C9D108-2A4B-4DD6-A99C-4AB76BBC4C6D

  26/07/16 15:26:48:636 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Setting the property "installSourcePath": /Users/username/Library/Caches/Adobe/AAMUpdater/AdobeLightroom-6.0/6.6.1

  26/07/16 15:26:48:636 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Definition of property 'mode': silencer

  26/07/16 15:26:48:636 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Setting the property "updateManifestPath": Users/username/Library/Application Support/Adobe/AAMUpdater/1.0/Data/AdobeLightroom-6.0/6.6.1/6.6.1.xml

  26/07/16 15:26:48:636 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Setting the property "workflow": update

  26/07/16 15:26:48:636 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Replace the "conflictingProcessInfo" property to: /tmp/6800FD8F-2255-41DB-BDAC-3E2051C4867E/95C9D108-2A4B-4DD6-A99C-4AB76BBC4C6D

  26/07/16 15:26:48:636 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Replace the "extensionsOnly" property to: 1

  26/07/16 15:26:48:636 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Replace the 'mode' property to: silent

  26/07/16 15:26:48:636 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Replace the "patchesOnly" property to: 1

  26/07/16 15:26:48:636 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Replace the "updateManifestPath" property to: Users/username/Library/Application Support/Adobe/AAMUpdater/1.0/Data/AdobeLightroom-6.0/6.6.1/6.6.1.xml

  26/07/16 15:26:48:636 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Replace the "workflow" property to: update

  26/07/16 15:26:48:637 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Find actions of payload:

  26/07/16 15:26:48:637 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Decide which mode of installation to use...

  26/07/16 15:26:48:638 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Setting START asked actions of payload

  26/07/16 15:26:48:638 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Value returned by searches for payload: Adobe Lightroom_6.6.1_AdobeLightroom6 - mul 6.6.1.0 {2C8CD39F-7A83-5516-B0CA-71BA5E60E7EF} is: false

  26/07/16 15:26:48:638 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | String action for Adobe Lightroom_6.6.1_AdobeLightroom6 - mul 6.6.1.0 {2C8CD39F-7A83-5516-B0CA-71BA5E60E7EF} is installed

  26/07/16 15:26:48:638 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Setting END asked actions of payload

  26/07/16 15:26:48:639 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Were collected advanced path check to INSTALLDIR

  26/07/16 15:26:48:639 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | INSTALLDIR is a correct path

  26/07/16 15:26:48:639 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | INSTALLDIR is not the root path

  26/07/16 15:26:48:639 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | INSTALLDIR is on a local volume

  26/07/16 15:26:48:639 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | INSTALLDIR is on a volume that is accessible in writing

  26/07/16 15:26:48:639 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | INSTALLDIR is not on a case-sensitive volume

  26/07/16 15:26:48:639 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | INSTALLDIR successful path validation database path: / applications

  26/07/16 15:26:48:731 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Operations START InstallOperationsQueue unordered

  26/07/16 15:26:48:731 | [INFO] |  | OOBE. OF |  |  |  | 2179470 |   Adobe Lightroom_6.6.1_AdobeLightroom6 - mul 6.6.1.0 {2C8CD39F-7A83-5516-B0CA-71BA5E60E7EF}: operation to install

  26/07/16 15:26:48:731 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Unordered InstallOperationsQueue to END operations

  26/07/16 15:26:48:731 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | START InstallOperationsQueue ordered operations

  26/07/16 15:26:48:731 | [INFO] |  | OOBE. OF |  |  |  | 2179470 |   Adobe Lightroom_6.6.1_AdobeLightroom6 - mul 6.6.1.0 {2C8CD39F-7A83-5516-B0CA-71BA5E60E7EF}: operation to install

  26/07/16 15:26:48:731 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | END InstallOperationsQueue ordered operations

  26/07/16 15:26:48:737 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Payloads were committed before the flight.

  26/07/16 15:26:48:737 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Call pre-sessional custom Hook

  26/07/16 15:26:48:737 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Operations START InstallOperationsQueue unordered

  26/07/16 15:26:48:737 | [INFO] |  | OOBE. OF |  |  |  | 2179470 |   Adobe Lightroom_6.6.1_AdobeLightroom6 - mul 6.6.1.0 {2C8CD39F-7A83-5516-B0CA-71BA5E60E7EF}: operation to install

  26/07/16 15:26:48:737 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Unordered InstallOperationsQueue to END operations

  26/07/16 15:26:48:737 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | START InstallOperationsQueue ordered operations

  26/07/16 15:26:48:737 | [INFO] |  | OOBE. OF |  |  |  | 2179470 |   Adobe Lightroom_6.6.1_AdobeLightroom6 - mul 6.6.1.0 {2C8CD39F-7A83-5516-B0CA-71BA5E60E7EF}: operation to install

  26/07/16 15:26:48:737 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | END InstallOperationsQueue ordered operations

  26/07/16 15:26:48:821 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Call the code to the custom action for the pre-installation for payload Adobe Lightroom_6.6.1_AdobeLightroom6 - mul 6.6.1.0 {2C8CD39F-7A83-5516-B0CA-71BA5E60E7EF}

  26/07/16 15:26:48:821 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | : TIMER: [operation payload: {2C8CD39F-7A83-5516-B0CA-71BA5E60E7EF}]

  26/07/16 15:26:48:822 | [INFO] |  | OOBE. OF |  |  |  | 2179572 | *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*

  26/07/16 15:26:48:822 | [INFO] |  | OOBE. OF |  |  |  | 2179572 | Operation of the installer: PayloadInstaller

  26/07/16 15:26:48:822 | [INFO] |  | OOBE. OF |  |  |  | 2179572 | *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*

  26/07/16 15:26:48:822 | [INFO] |  | OOBE. OF |  |  |  | 2179572 | Request to install the payload

  26/07/16 15:26:48:823 | [INFO] |  | OOBE. OF |  |  |  | 2179572 | Adobe Lightroom_6.6.1_AdobeLightroom6 - mul 6.6.1.0 payload {2C8CD39F-7A83-5516-B0CA-71BA5E60E7EF}: ARKEngine component of path Applications/Utilities/Adobe Application Manager/DECore/6/resources

  26/07/16 15:26:48:841 | [INFO] |  | OOBE. OF |  |  |  | 2179572 | Extraction of asset:/Users/username/Library/Caches/Adobe/AAMUpdater/AdobeLightroom-6.0/6.6.1/payloads/A dobeLightroom6-mul-210716042246/AdobeLightroom6-mul - 210716042246.zip

  26/07/16 15:26:48:841 | [INFO] |  | OOBE. OF |  |  |  | 2179572 | Affecting false in the unzipper file open option

  26/07/16 15:27:36:874 | [INFO] |  | OOBE. OF |  |  |  | 2179572 | All self-extracting assets. Number of assets: 1

  26/07/16 15:27:36:874 | [INFO] |  | OOBE. OF |  |  |  | 2179572 | CustomizedPatch property not found in the database

  26/07/16 15:27:36:875 | [INFO] |  | OOBE. OF |  |  |  | 2179572 | Begin the installation of payload to /Users/username/Library/Caches/Adobe/AAMUpdater/AdobeLightroom-6.0/6.6.1/payloads/AdobeLi ghtroom6-mul-210716042246/Install.db

  26/07/16 15:27:36:947 | [ERROR] |  | OOBE. OF |  |  |  | 2179572 | DS015: Cannot read the target of the symbolic link to the source file "/ Applications/Adobe Lightroom/Adobe Lightroom.app/Contents/Helpers/DynamicLinkMediaServer/application/dynamiclinkmediaserver.» app/Contents/amecommand.app/Contents/Dictionaries "Seq (30)"

  26/07/16 15:27:36:947 | [WARNING] |  | OOBE. OF |  |  |  | 2179572 | DW063: The ARKCopySymlinkCommand command failed. (30 Seq)

  26/07/16 15:27:36:947 | [INFO] |  | OOBE. OF |  |  |  | 2179572 | End of the installation of payload to /Users/username/Library/Caches/Adobe/AAMUpdater/AdobeLightroom-6.0/6.6.1/payloads/AdobeLi ghtroom6-mul-210716042246/Install.db

  26/07/16 15:27:38:161 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | * = * = * = * = * = * = * = * = * = * = * = * = * = * = * = * Operation completes. Statut : 2 = * = * = * = * = * = * = * = * = * = * = * = * = *

  26/07/16 15:27:38:161 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | : TIMER END: [operation payload: {2C8CD39F-7A83-5516-B0CA-71BA5E60E7EF}] took 49342 milliseconds (49,342 seconds) DTR = 14796 Kbps (14,4492 Mbps)

  26/07/16 15:27:38:163 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | OverrideFile specified user:

  26/07/16 15:27:38:164 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | The inventory of the csu was not updated for Adobe Lightroom_6.6.1_AdobeLightroom6 - mul 6.6.1.0 payload is {2C8CD39F-7A83-5516-B0CA-71BA5E60E7EF}, the value of the local var - 1

  26/07/16 15:27:38:165 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Asking the pre-installation for payload Adobe Lightroom_6.6.1_AdobeLightroom6 - mul 6.6.1.0 RESTORE custom action code {2C8CD39F-7A83-5516-B0CA-71BA5E60E7EF}

  26/07/16 15:27:38:292 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | No operation.  We finished:

  26/07/16 15:27:40:302 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Total number of installed components: 0

  26/07/16 15:27:40:302 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Total components repaired: 0

  26/07/16 15:27:40:302 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Total number of removed components: 0

  26/07/16 15:27:40:302 | [WARNING] |  | OOBE. OF |  |  |  | 2179470 | DW050: The following payload errors were found during the installation:

  26/07/16 15:27:40:302 | [WARNING] |  | OOBE. OF |  |  |  | 2179470 | DW050: - Adobe Lightroom_6.6.1_AdobeLightroom6 - mul: installation failed

  26/07/16 15:27:40:302 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Call post-Forum custom Hook

  26/07/16 15:27:40:302 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | : TIMER END: [Total Timer] took 51895 milliseconds (51,895 seconds) DTR = 15131,4 Kbps (14,7768 Mbps)

  26/07/16 15:27:41:307 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | -------------------------------------- Summary --------------------------------------

  26/07/16 15:27:41:307 | [INFO] |  | OOBE. OF |  |  |  | 2179470 |  -0 fatal Error (s), 1 Error (s)

  26/07/16 15:27:41:307 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | The OSX version: 10.11.6

  26/07/16 15:27:41:307 | [INFO] |  | OOBE. OF |  |  |  | 2179470 |

  26/07/16 15:27:41:307 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | -Payload: Adobe Lightroom_6.6.1_AdobeLightroom6 - mul 6.6.1.0 {2C8CD39F-7A83-5516-B0CA-71BA5E60E7EF}.

  26/07/16 15:27:41:307 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | ERROR: DS015: cannot read the target of the symbolic link to the source file "/ Applications/Adobe Lightroom/Adobe Lightroom.app/Contents/Helpers/DynamicLinkMediaServer/application/dynamiclinkmediaserver.» app/Contents/amecommand.app/Contents/Dictionaries "Seq (30)"

  26/07/16 15:27:41:307 | [INFO] |  | OOBE. OF |  |  |  | 2179470 |

  26/07/16 15:27:41:307 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Please find the error string above to find when the error occurred.

  26/07/16 15:27:41:307 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | These errors resulted in installer exit code mentioned below.

  26/07/16 15:27:41:307 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | -------------------------------------------------------------------------------------

  26/07/16 15:27:41:307 | [INFO] |  | OOBE. OF |  |  |  | 2179470 |

  26/07/16 15:27:41:307 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Exit code: 7 - could not complete the silent workflow.

  26/07/16 15:27:41:307 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | Please see specific errors for troubleshooting. For example, ERROR: DS015...

  26/07/16 15:27:41:307 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*

  26/07/16 15:27:41:307 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | END - Installer Session

  26/07/16 15:27:41:307 | [INFO] |  | OOBE. OF |  |  |  | 2179470 | *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*

  Hi PDS,

  Thanks for sharing of the log file, it helps us to understand the root cause of the problem and help your best and fast, according to the newspaper shared the main error is 'Code output 7', I recommend you to try the solutions in the following link and share the results:

  Errors 'Exit Code 6' and 'exit 7 "Code install Adobe CS6, CS5.5, CS5, Premiere Elements and Photoshop Elements.

  Waiting for your response.

• My Apple Macbook late 2009 has been upgraded to 4 GB and Mountain Lion but runs very slowly. When I check the memory system activity monitor, I see that there are 1.6 GB inactive. Is this the cause of the slowness and what I can do?

  My Apple Macbook late 2009 has been upgraded to 4 GB and Mountain Lion but runs very slowly. When I check the memory system activity monitor, I see that there are 1.6 GB inactive. Is this the cause of the slowness and what I can do?

  Reinstall OS X from scratch and add more RAM.

  Ways to help make a slow Mac faster

  17 reasons why your Mac runs slower than expected

  Slow performance of Mac? This Article addresses!

  Difficulty of slow start in OS X | MacFixIt - CNET Reviews

  6 easy tips to speed up OS X Yosemite on your Mac.

  Avoid using third-party software that claims to clean your computer. This software does more harm than good. In addition, you don't need it. Note that all computers become slower over time even in the normal conditions of use. Generally, the experienced users erasing the hard drive and do a clean install from scratch at least once a year or every time that the installation of a major upgrade of the OS. Well sure doing so also means that you need to maintain regular and several backups.

  Add more RAM or reduce the number of simultaneously executed from applications and utilities. Remove unnecessary software such as anti-malware and that promises to clean your Mac. Look for the runaway process: Runaway applications can shorten the battery life, affect performance and increase the heat and fan acti... See also:

  Before Mavericks

  Open the activity monitor in the Utilities folder.  Select all processes in the drop process .  Click the % CPU column heading twice to display in descending order.  If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  Mavericks and later versions

  Open the activity monitor in the Utilities folder.  Select all processes in the menu display .  Click the CPU tab in the toolbar. Click the % CPU column heading twice to display in descending order.  If you find a process that uses a large amount of CPU %, then select the process, then click on the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  Things you can do to solve the slow Downs

  If your computer seems to run slower, here are some things you can do:

  Start with tours: OS X maintenance - MacAttorney;

  The X Lab: the X-frequently asked questions.

  " Safe mac" Mac Performance Guide;

  " Safe mac" the myth of the dirty Mac;

  Maintenance fast Mac Help.

  Start in Safe Mode , and then repair your hard disk and permissions:

  Fix the hard disk and permissions before Lion

  Boot from your OS X install disk. After the installer loads, choose your language and click on the button continue. When the menu bar appears select utility drive in the Utilities menu. After that the charges of THE select your entry from hard drive (mfgr. ID and car size) in the list on the left.  In the status area, you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is faulty or has failed. (State SMART is not reported on external drives Firewire or USB). If the drive is "verified", then select your OS X volume in the list on the left (subentries under the entry for the road), click the first aid tab, then click the repair disk button. If THE reports any errors that have been corrected, and then run repair disk again until no errors are reported. If no errors are reported, click repair permissions. Wait until the operation is complete, then exit FROM and return to the installer.

  Repair the hard drive - Lion-Lion/mountain/Mavericks

  HD recovery start:

  Restart the computer and after the buzzer, press on and hold down the COMMAND and R until it appears the screen of Menu utilities. Otherwise, restart the computer and after the buzzer, press on and hold down the OPTION key until the Boot Manager screen. Select recovery HD disk icon and click on the button below.

  When the recovery menu appears, select disk utility. After that the charges of THE select your entry from hard drive (mfgr. ID and car size) in the list on the left.  In the status area, you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is faulty or has failed. (State SMART is not reported on external drives Firewire or USB). If the drive is "verified", then select your OS X volume in the list on the left (subentries under the entry for the road), click the first aid tab, then click the repair disk button. If THE reports any errors that have been corrected, and then run repair disk again until no errors are reported. If no error is not reported, then click repair permissions. Wait until the operation is complete, then exit FROM and return to the main menu. Select restart from the Apple menu.

  Restart your computer normally and see if it helped at all. Then do little maintenance:

  For disk utility can't handle situations, the best third party is Disk Warriorutility;  Fixed DW only for problems with the disk directory, but most disk problems are caused by the corruption of directory; Warrior drive 4.x is now compatible with Intel Mac.

  Note: Alsoft ships DW on a bootable DVD that will boot Mac running Snow Leopard or earlier. He cannot start Mac that came with Lion or later preinstalled, however, DW will work on these models.

  Suggestions for OS X maintenance

  OS X performs certain maintenance functions that are supposed to take place on a daily, weekly, or monthly period. Maintenance scripts that are run at the beginning AM only if the computer is turned on 24/7 (no sleep). If this isn't the case, then a great solution is to download and install a shareware like Macaroni, JAW PseudoAnacronor Anacron utility that will automate the maintenance regardless of whether activity if the computer is off or asleep.  Dependence on third-party utilities to run periodic maintenance scripts has been significantly reduced since Tiger.  These utilities have little or no functionality with Snow Leopard or later version, and must not be installed.

  OS X automatically defrags files smaller than 20 MB in size, so unless you have a disk full of very large files it little need to defragment the hard drive.

  Under no circumstances should you install operating MacPaw or ZeoBit software (CleanMyMac/CleanMyDrive or Mac Keeper, respectively.) You don't need special software to keep your computer.

  Useful links about malware Protection

  "If you have an immediate problem with ads popping up see the Mac without danger" Adware removal Guide and AdwareMedic.

  Open Safari, select Preferences from the Safari menu. Click the Extensions icon in the toolbar. Disable all Extensions. If it stops your problem, then re-enable one by one until the problem returns. Now remove this extension as it is the origin of the problem.

  The following comes from user stevejobsfan0123. I made minor changes to adapt to this presentation.

  Difficulty a few pop ups browser that supported Safari

  Common pop - ups include a message saying that the Government has taken over your computer and you pay release (often called "Moneypak"), or a false message saying that your computer has been infected and you need to call a number of tech support (sometimes claiming to be Apple) to get it to be resolved. First of all, understand that these pop-ups are not caused by a virus and that your computer has not been assigned. This "hack" is limited to your web browser. Also understand that these messages are scams, so don't pay not money, call number, or provide personal information. This article will give an overview of the solution to remove the pop-up window.

  Quit Safari

  Usually, these pop-ups will not go by clicking 'OK' or 'Cancel '. In addition, several menus in the menu bar may become disabled and show in grey, including the option to leave Safari. You'll probably force quit Safari. To do this, press command + option + ESC, select Safari, press on force quit.

  Relaunch Safari

  If you restart Safari, the page will reopen. To avoid this, hold the "Shift" key when opening Safari. This will prevent windows since the last time that Safari was running since the reopening.

  It will not work in all cases. The SHIFT key must be maintained at the right time, and in some cases, even if done correctly, the window is displayed again. In these circumstances, after force quit Safari, turn off Wi - Fi or disconnect Ethernet, depending on how you connect to the Internet. Then restart Safari normally. He'll try to reload the malicious Web page, but without a connection, it will not be able to. Leave this page by entering a different URL, i.e. www.apple.com and try to load it. Now you can reconnect to the Internet and the page that you entered is displayed rather than the malicious.

  An excellent link to read is Tom Reed Mac Guide of malicious programs.

  Also, visit the FAQ XLab and read of detection and avoid malicious software and spyware.

  Check out these articles from Apple:

  Mac OS X Snow Leopard and malware detection

  OS X Lion-Protect your Mac against malicious software

  OS X Lion mountain - protect your Mac against malicious software

  OS X Mavericks-Protect your Mac against malicious software

  On the quarantine of file under OS X

  If you need antivirus protection Thomas Reed recommends to use ClamXAV. (Thanks to Thomas Reed to this recommendation.)

  The user Joe Bailey comes this equally useful advice:

  The facts are:

  1. There is no anti-malware software can detect 100% of malware out there.

  2. There is no anti-malware that can detect all targeting the Mac.

  3. the best way to prevent breaches the most is for you as the user is aware that

  the most successful malware attacks rely on sophisticated social engineering

  techniques preying on human greed, * and fear.

  4 Internet pop-up windows telling the FBI, NSA, Microsoft, your ISP has detected malware on

  your computer is designed to trick you into installing their malware thinking it's a

  protection against malware.

  5. some of the anti-malware market products are worse than malware

  go where they are supposed to protect you.

  6. be careful where you go on the internet.

  7. don't download anything from sites, you know are safe.

  8 avoid links that you receive in email, always be wary, even if you get something

  you think a friend is, but that you did not expect.

  9. If there is any question in your mind, then assume that it is malware.

  Troubleshooting Applications

  I recommend that you download a utility such as TinkerTool System, OnyX, Mavericks Cache Cleaneror hiding a Cocktail that you can use to delete the former newspapers and archives, cleaning, etc. Corrupted cache, logs or temporary files can slow down the application or OS X crashes and panics of the kernel.

  If you have leopard snow or leopard, then for similar repairs install Applejackfreeware utility.  If you do not start in OS X, you can boot into single-user mode , where you can run Applejack to make a set of routines for repair and maintenance of the command line.  Note that it takes 1.5 AppleJack for Leopard. AppleJack 1.6 is compatible with Snow Leopard. Applejack does not work with Lion and later versions.

  Basic backup

  For some people, Time Machine will be more than enough. Time Machine is part of Mac OS X. There are two components:

  1. a panel of Time Machine preferences as part of the system of preferences;

  2. a request for Time Machine, located in the Applications folder. It's

  used to manage backups and restore backups. Time Machine

  requires a backup drive that is at least twice the capacity of the

  drive being backed up.

  You can also get an external drive at least equal to the size hard disk internal and make (and maintain) a bootable clone/backup. You can make a bootable clone using the disk utility's restore option. You can also create and maintain clones with good backup software. My personal recommendations are (the order is not significant):

  1 Carbon Copy clone

  2. get backup

  3 already seen

  4 superDuper!

  5. Synk Pro

  6. Tri-Backup

  Visit The FAQ XLab and read the FAQ on the backup and restore.  Also read How to back up and restore your files. For using Time Machine, visit FAQ Time Machine of Pondini for help with all this time Machine.

  Referenced software can be found at MacUpdate .

  Additional tips

  Make sure you have a sufficient amount of RAM installed for the number of applications you run simultaneously. Make sure to leave a minimum of 10% of the capacity of the hard disk as free space.

  Add more RAM. If your computer less than 2 GB of RAM and you use OS X Leopard or later, then you can do it with more RAM. Snow Leopard and Lion works much better with 4 GB of RAM that is their system. Most concurrent applications, that you tend to use the more RAM you should have.

  Always have at least 15 GB, or 10% of the capacity of your hard disk as free space, the largest. OS X frequently accesses your hard disk, so offering enough free space will keep things slow down.

  Check for applications that may be hogging the CPU:

  Before Mavericks

  Open the activity monitor in the Utilities folder.  Select all processes in the drop process .  Click the % CPU column heading twice to display in descending order.  If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  Mavericks and later versions

  Open the activity monitor in the Utilities folder.  Select all processes in the menu display .  Click the CPU tab in the toolbar. Click the % CPU column heading twice to display in descending order.  If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  This problem occurs often because of a corrupted cache or the preferences file or an attempt to write in a corrupted log file.

• Query cannot be parsed in the generator. If you believe that your query is syntactically correct, check the generic "columns" box below the source of the region without analysis. ORA-00905: lack of keyword

  Hi all

  I have create report sql in version 4.2, and now we have apex version 5.0 upgrade.

  I encountered error when I change the State of sql

  The error massage:

  Query cannot be parsed in the generator. If you believe that your query is syntactically correct, check the generic "columns" box below the source of the region without analysis. ORA-00905: lack of keyword

  My SQL

  SELECT VW.*

  , CASE WHEN (VW.file_code is null

  OR VW.cancel_flg = 'Y'

  OR (TOUR_DEP_DATE + GET_FILE_LOCKING_DAYS (VW. (SBU_CODE) < = trunc (sysdate))

  ) THEN

  ' < font color = "Red" > < b > other < /b > < / police > '

  ON THE OTHER

  "< a href =" f? p = & APP_ID.:51: & SESSION. : O PR: & DEBUG. : 51:P51_FILE_CODE, P51_COSTING_CODE, P51_TOUR_REG_NO, P51_VERSION_NO, P51_REQUEST, P51_AGENT_NAME, P51_ADULTS, P51_CHILDS, P51_MKT_CODE, P51_QUOT_CURR:'

  || FILE_CODE | «, » || COSTING_CODE | «, » || TOUR_REG_NO | «, » || VERSION_NO | «, » ||' OPR' | «, » || AGENT_CODE | «, » || VW. FROM_PAX | «, » || 0||','|| VW.mkt_code | ',' | VW. QUOT_CURR |': ' > < font color = blue > < b > other < /b > < / police > '. "

  END as "other Actions".

  , CASE WHEN ((VW.file_code is not null AND TOUR_DEP_DATE + GET_FILE_LOCKING_DAYS (VW. (SBU_CODE) < = TRUNC (SYSDATE))

  OR cancel_flg = 'Y '.

  OR (VW. REF_COSTING_CODE = VW. ADDL_FIELD2 AND VW. ADDL_FIELD1 LIKE '% COPIED FROM % OF APPROVAL'

  AND BOOKING_NAME LIKE "%-Backup")

  ) THEN

  ' < font color = "Red" > < b > edit < /b > < / police > '

  ON THE OTHER

  "< a href =" f? p = & APP_ID.:149: & SESSION. : & DEBUG. : 149:P149_COSTING_CODE:'

  || COSTING_CODE |': ' > < font color = blue > < b > edit < /b > < / police > '. "

  END AS 'Edit '.

  , CASE WHEN (Nvl (cancel_flg, 'n') = 'Y')

  )

  THEN

  ' < font color = "Red" > < b > add < /b > < / police > '

  ON THE OTHER

  "< a href =" f? p = & APP_ID.:33: & SESSION. : & DEBUG. : 33:P33_COSTING_CODE, P33_FILE_CODE, P33_MKT_CODE, P33_QUOT_CURR, P33_NO_OF_ADULT, P33_NO_OF_CHILD:'

  || COSTING_CODE | «, » || file_code | «, » || VW.mkt_code | ',' | VW. QUOT_CURR | «, » || VW. FROM_PAX | «, » || 0 | ': "> < font color = blue > < b > add < /b > < / police > '

  END as 'Services '.

  OF TOUR_MAS_VW VW

  How to solve it.

  Thank you

  Dear friends

  Thanks for your helping hands.

  I found the solution for this. We can solve this problem by using these solutions

  • A region of HTML:

    click me
    

  • Using PL/SQL:

    htf.anchor('f?p=100:5:'||V('APP_SESSION'),'click me');
    

  • Using a SQL query: SELECT htf.anchor('f?p=100:5:'||:APP_SESSION,'clickme') FROM DUAL;

  We can write the query in the form

  SELECT ' f? p = 100: 1 :'|| : APP_SESSION |': ' | : APP_UNIQUE_PAGE_ID |

  ': P1_EMPNO :'|| employe_id,

  first name,

  job_id

  Employees

  Thank you & best regards

  CORINE

• I got the U44M1P2003 error message, while Adobe has tried to upgrade my PSE12. Then I checked the registry for the location of the correct software and off my anti-virus program. I tried the upgrade again, but received the same error message. What to do n

  I got the U44M1P2003 error message, while Adobe has tried to upgrade my PSE12. Then I checked the registry for the location of the correct software and off my anti-virus program. I tried the upgrade again, but received the same error message. What to do next?

  Please see:

  12.1 error installation update | Photoshop Elements, first Elements

  Update the items 12.1 fault (U44M1P2003)

  I hope this helps.

  Concerning

  Megha Rawat