Check the subscription of the user
Utel Hello,
I understand better now. Unfortunately, the payment services SDK is designed for SmartPhone/Tablet platforms specifically; a similar API for office questioning (i.e. from a web server) does not exist.
If you put the payment services for this SDK, then renewal/auto-sync with your own waiters will be impossible with a non-connected app (i.e. If the user does not run your application.)
A review may be, when the application starts, ask your own server for their status. If the status is invalid, prompt the user to make the purchase with the API. At the end of the purchase, send another update on your server, which indicates that this account is good for the other (i.e. 30) X days.
The above has solved most of the problems, except for the automatic renewal. This approach also adds the manual steps to buy back all X days. However, it would address the issue to have the updated subscription updated from multiple sources, because your server is the first source checking.
Another approach would be to set up a good for X days subscription that renews automatically. The application starts, you can query the status of the goods and to upgrade your server to match. The problem here is that if the user does not run at their request, you cannot make this request and your database may not be up-to-date.
Given these two options, the first seems to be ideal because the downsides are re-purchase every X days, as opposed to potentially out-of-sync data with the second approach.
If one combines the two, we can obtain a subscription that renews automatically, and launch, the application queries the status/updates your server. The only thing missing, is that if the application is not running, so this update for your server will occur not on the side of the unit. A workaround may be that any account which has not verified (by device or another route) for the period of time (30 days) is considered as is no longer valid. Then, the next time that the user starts the application, the automatic control will be held, update your server and the client is good to go again.
Erik Oros
BlackBerry Development Advisor
Tags: BlackBerry Developers
Similar Questions
-
When I started and connect to the windows 2008 Server and when trying to open any folder I get the below error message:
The server process could not be started because the configured identity is incorrect. Check the user name and password.
Please give me your entries for this problem.
Kind regards
Shankar Kale
Hi Shankar,The question you posted would be better suited in the TechNet Forums. See the link.Hope this information helps. -
Original title: "Windows Security".
I have Vista Home Premium with SP 2. In Windows Mail, logon security keeps popping up asking me to check the user name and password. This happens from time to time for many months and I've always got to work but happened several times today. I can sign in the server through my ISP and get email. In Windows mail, I confirmed that the name of username-password is the same that I connect through the ISP. I can't front/send by email but receive in Windows mail.
Server response: '-ERR [IN USE] account is locked by another session or for maintenance, try again.',
So wait a while and try again later. You can also go to their website and log on there to see if it works.
Also try to compact and repair the database (see www.oehelp.com/WMUtil/)
Steve
-
How to use JavaScript to limit the number of boxes to check the user can select a PDF form?
How to use JavaScript to limit the number of boxes to check the user can select a PDF form?
Here's the working solution
Please rename all the boxes like chkBox0, chkBox1... .chkBox30 (must start with 0)
Value of exports of each checkbox must be "Yes" (default value is Yes)
Place this Code at the level of the Javascript Document
-Code JavaScript document-
var counter = 0; Checked the meter
-Count boxes checked again when the document is closed and reopened.
for (var i = 0; i)<= 30;="">=>
If (getField("chkBox"_+_i).value == 'Yes') {}
Counter += 1;
}
}
-The function of validation-
function validateCheckBox(name,value) {}
If (value == 'Yes' & meter)<>
Counter += 1;
} else if (value == 'Off') {}
counter = 1;
} else {}
getField ("name") .value = "Off";
App.Alert ("you can select only four checkboxes");
}
}
-End of Document Javascript-
Now put this line in the MouseUp event all checkboxes
Box - Code MouseUp event.
validateCheckBox (event.target.name, event.target.value);
//----------------------------------------------------------------------------------
Hope this will help
Kind regards
Post edited by: Mohammad Irfan
-
How to check the user POV period and year in the mapping script?
Hello
I want to use information from period and the year in the script map.
for example: if I load the March data, I use Custom 3 Q1 dimension. So I want to check my active period of user POV in my C3 automatically mapping as in the Import Script, something like this:
Select the option get Month (dblPerKey)
Cases 1 to 3
Result = Q1
Box of 4 to 6
Result = Q2
......
The test results with dblPerKey:
It seems that if I use the Script to Import, then dblPerKey contains the value, but when you use the script to map, then dblPerKey is empty. At least when I tested this script returns 1899 script 'result = Year (dblPerKey).
Summary:
In the import script: (dblPerKey) Year returns as a result of user POV selection year
In the mapping script: Year (dblPerKey) always returns 1899
Question: Is there a way to check user POV when mapping scripts?
Thanks a lot for your answers
BR
Karnie
Replying to myself: I need to use varValues (3) in map scripts. Not a dblPerKey.
-
Check the user name before submitting the form using liquid
I saw a post form on that front, however, I can't find it now.
I think using liquid, it is possible to check a username of people before sending the form.
Is this possible with the liquid? If so, can someone please point me in the right direction.
Thank you
Lynda
Lynda,
You must do the following:
{% assign userName = globals.get.userName -%} {module_data resource="customers" version="v3" collection="customerInfo" where="\{'username': '{{userName}}'\}"} {{ customerInfo.totalItemsCount }}{{ customerInfo.totalItemsCount }}
And in your script code, just to get the value of the username input field. -
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Ideas message: error
- You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
Hi Maria,
I suggest you to visit these below provided article.
What to do if you forget your Windows password
http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-you-forget-your-Windows-password
In addition, technical support engineers Microsoft cannot help you recover passwords files and Microsoft who are lost or forgotten product features.
Microsoft's strategy concerning lost or forgotten passwords
http://support.Microsoft.com/kb/189126/en-usThank you, and in what concerns:
I. Suuresh Kumar - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
-
Check the number of users and security
Gurus,
In our EPM (System 11.1.2) environment, we have four applications/databases (planning and essbase included) and I need to list the total number of users in all applications and see what he put in service and security are. How I might be able to do?
Do I need security on each of them for export and filter or is it possible to check the users in all applications at the same time?
Thank youdeparture from Hyperion wrote:
Thanks for your reply Celvin
Is there a way I can view a list of users by Department?
Y at - it something like that to sort by Department/Group.
Thank youList of users by Department - there are groups of Shared Services, are your groups classified by Department? If the answer to this is 'Yes', then Yes, the export of all shared Services groups will track children (members) in each group.
I don't think that there is some kind of Shared Services, but once the csv file is exported, you can sort it out.
-
The User Interface browser missing
Hello
I'm sorry, but the coffee crisis seems to persist...
While working on the interface graphical user Interface browser, located to the right of the user interface, disappeared. Because the GUI is larger than the window and I need to scroll horizontally to evaluate the right-hand side of it, I didn't know this fact immediately. Therefore, I don't know what it was, I did it to make the browser UI disappear. Navigation assistance, I found no hint of how to show/hide the browser, so I guess it should always be there...
I checked: the user interface editor is limited. I also tried to release and re - lock all windows, without effect.
Thank you
Wolfgang
good news: the browser of the user interface is still there, but almost as shy than me: he was pressed to the right border, see the illustration below. So with one hand, I could see he...
Excuse me for interrupting.
-
How to retrieve the id and the password of the user for a Windows service credentials?
Hello
Is it possible to recover a user credential and password in which runs a one-stop service
When I created a one-stop service and set to networkservice / Local user of the Service, later for another service to stop, I want to use this information to identify the user (stop service). How can I retrieve these credentials of the user?
Give more details... My question, if you go to control Panel\All Control Panel Items\Administrative Tools\Service \Properties, you get a tab for login
You can check the user credentials here.
How can be recover through c# code? (.net)
Hi Nandakumarpb,
Thanks for posting the request in the Microsoft Community.
I understand from the description of the issue, you want to know about the recovery of the username and passowrd through c# .net Windows service.
It is better suited for the IT audience Pro on MSDN. Please ask your question in the MSDN Support Forum. You can follow the link to your question:
I hope it helps. If you have problems in the future, please let us know. We will be happy to help you. -
Hello
I have a huge problem. The laptop has an account of user Karina, who was also the Manager. But I opened another account, WAZ. Has decided to make the administrator Flippie and Karina just a standard user.
Now my problem is that Flippie has disappeared from my laptop. Cannot find and I'm in trouble because I don't have administrator access. You will appreciate all help.Hello
1. are you able to connect account Karina?
2 have you made any changes to the computer before the show?
3. you are in a domain network?
If you are able to log onto the account of Karina follow this:
Method 1:
How to check the user account is disabled:
1. open the start menu, type lusrmgr.msc in the search line and press enter.
2. click on the users in the left to open pane folder the users and groups.
3. in the middle pane of the users, double-click the name of the user account (ex: example-account)
4. on the general tab, clear the account is disabled , and click OK.
5. Once completed, close the window to local users and groups.
6 restart the computer audit are you able to see another user account.
Method 2:
Activate the built in the administrator user account and check:
1 restart the computer and keep tapping F8 until you reach the start menu.
- Click repair your computer.
- Click the operating system you want to repair, and then click Next.
- In the System Recovery Options dialog box, click command prompt.
5. at the command prompt, type net user administrator / Active: Yesand then press ENTER.
6. type net user administrator
, , and then press ENTER.Note: Please replace the tag
with passwords which you want to set for the administrator account. Type exitand press ENTER. Restart the computer and check.
I hope that the above information is useful!
-
Verification of the users belonging to the Group spasfic weblogic server
I built a simple service application web with jdeveloper 11.1.1.7 strategy (Wssp1.2 - 2007-Https-UsernameToken - Plain.xml) and deploy the weblogic 10.3. Everything works very well in both the client side and server.
The client side is unable to call any method without specifying the username and password properties. The server automatically checks the user in users values define in weblogic server in the following path (summary of the areas of security > myrealm > users and groups). Hereby, the customer can access the system if he takes one of the users in this group even with the default user weblogic/weblogic.
Question: How to limit the name to username/password check with specific usergroup?. That is, if the client mentions the name of user and password outside of the Group (even if the values are correct) the server rejects the request
Problem, solved by (user name: Roque)
in this link: java - verification of users within the spasfic group of weblogic server for the web service application - Stack Overflow
Here is his answer for your reference:
If you use the 'default' weblogic for users authentication method, you can follow these steps to set up an access group policy:
- Connect to the weblogic administration console
- Click on the links of deployments
- Select your webservice
- Click the Security tab
- Click the sub-tab political
- Choose your authorization provider in the menu drop-down (looks like by default)
- Choose Add Conditions-> Group-> Type in the name of the Group
- Finishing
Now that the group you added should be able to invoke the web service. All other users should see something like:
javax.xml.ws.soap.SOAPFaultException: Access denied to operation myWebService
-
JDeveloper 12 c how to block created the user.
Hello, this is my first post. I have a question regarding my request - I use JDeveloper 12 c. In my application, I have implemented the user file, which has all the users who can connect to my request. For each user, I have an option called 'user locked '. I want to do that if the user is locked, it cannot log in to my application. Someone has an idea how I can do?
It is a code for my .java login:
public class LoginBean {}
private String _username;
private String _password;
public LoginBean() {}
LogEvents.addSyslog ("OPEN", "Connection...", null, null, null);
}
{} public void setUsername (String _username)
This ._username = _username;
}
public String getUsername() {}
return _username;
}
{} public void setPassword (String _password)
This ._password = _password;
}
public String getPassword() {}
return _password;
}
public String doLogin() {}
String _username =;
Byte [] pw = _password.getBytes ();
FacesContext ctx = FacesContext.getCurrentInstance ();
HttpServletRequest request = ctx.getExternalContext () .getRequest () (HttpServletRequest);
try {}
CallbackHandler Manager = new URLCallbackHandler (UN, pw);
MySubj subject = weblogic.security.services.Authentication.login (handler);
weblogic.servlet.security.ServletAuthentication.runAs (mySubj, request);
ServletAuthentication.generateNewSessionID (request);
String loginUrl = ' faces/welcome. '
LogEvents.addSyslog ("LOGIN. TRUE', 'Connected' - + this ._username, null, null, this ._username);
sendForward (loginUrl);
} catch (FailedLoginException fle) {}
ResourceBundle resourceBundle = BundleFactory.getBundle ("abc.view.ViewControllerBundle");
String msgTxt = null;
If (resourceBundle! = null) msgTxt = ("LOGIN resourceBundle.getString. NOT VALID");
If (msgTxt == null) msgTxt = "a bad user name or password was specified";
LogEvents.addSyslog ("LOGIN. (FALSE', 'Error while recording -' + this ._username, null, msgTxt, this ._username);
FacesMessage msg is new FacesMessage (FacesMessage.SEVERITY_ERROR, "Incorrect Username or Password", msgTxt);.
ctx.addMessage (null, msg);
setPassword (null);
} catch {} (the LoginException)
reportUnexpectedLoginError ("LoginException", the);
}
Returns a null value.
}
{} private void sendForward (String forwardUrl)
FacesContext ctx = FacesContext.getCurrentInstance ();
try {}
ctx.getExternalContext (.redirect (forwardUrl));
} catch (IOException ie) {}
reportUnexpectedLoginError ("IOException", IE);
}
ctx.responseComplete ();
}
' e private void reportUnexpectedLoginError (String errType, Exception) {}
ResourceBundle resourceBundle = BundleFactory.getBundle ("abc.view.ViewControllerBundle");
String msgTxt = null;
If (resourceBundle! = null) msgTxt = ("LOGIN resourceBundle.getString. OTHER') .concat ("(") .concat (errType) .concat ("") ");
If (msgTxt == null) msgTxt = "an unexpected error during the connection (".concat (errType).concat("), see the logs for details");
FacesMessage msg = new FacesMessage (FacesMessage.SEVERITY_ERROR, "Unexpected error during connection", msgTxt);
FacesContext.getCurrentInstance () .addMessage (null, msg);
FacesContext.getCurrentInstance () .renderResponse ();
}
}
Kind regards
WK
Hello
for that, you or the other
1 - write your own authentication provider in WLS that authenticates users, but also looks at the flag of "lock".
2 use the SQL authentication provider and modify the SQL query to include indicator
3 - in your code, check the user file before performing the authentication. At this point, you already have the user name. Just make sure that you don't tell people that their account is locked before you checked the authentication can be processed successfully. Otherwise - if you let them know right after comparing the lock check - your app can be used to exploit your underlying identity management system.
Frank
-
created a new workspace, the user created OTN account but cannot access to workspace
Hello
I created recently GFW_SYSTEMS_TEAM beehiveonline workspace.
I added 4 external users, including myself as an external user using my gmail account: [email protected] so I could check the process from the point of view of external users
I created my account OTN and checked it but can't access the workspace by using this connection.
When I check the users in beehiveonline-apex, I see that all users are verified.
When I check the users in the workspace, 2 x external users are absent, but my gmail user is here
When I check the ~ tool BOLADMIN I see that my gmail user is missing - just my oracle account is visible; the other 2 x external users are also missing.
my oracle and gmail email addresses are similar: neil.pritchard@~ oracle.com, gmail.com
I reached from my portable secondary oracle (OBI). not on the vpn
can you tell me if there are known conflicts with the above configuration?
more information:
OPERATING SYSTEM: XP SP2; IE8 browser
When you access the teamcollab or work spaces, I get "Internet Explorer cannot display the webpage" during the connection authentication
Best regards
Neil
Published by: 972236 on November 20, 2012 05:49Neil,
We spotted some configuration scripts that had failed and rerun them now - hoefully additional users will be soon in the group/workspace. The 2 emails to you will not be a shock, because they are valid and unique.
Phil
-
Model test using the interface user does not appear in the user interface
I created a user interface for a model and trying to test it (using the model to test > start a new configuration > model UI (select user interface) > finish), it does not have the user interface, instead, it shows the summary of Configuration page. I checked the user interface, and there the correctly defined page flow. What is the reason for this and what is the solution. Thanks in advance.Check if you have associated page flow to the UI or not. Can be done in the edit page of the user interface.
Check if you have added a page active in pageflow or not.
Also make sure that you have visible page - page display of page condition is true. -
ORA-13754: 'SQL Tuning Set' 'string' does not exist for the user "sysman."
ORA-13754: 'SQL Tuning Set' 'string' does not exist for the user "sysman."
Hello
in 10g R2 when I run the following in isqlplus I error of the United Nations:
No problem if I run it as sys to sqlplus.SELECT * FROM TABLE(DBMS_SQLTUNE.SELECT_SQLSET( 'my_sql_tuning_set', '(disk_reads/buffer_gets) >= 0.05')); ORA-13754: "SQL Tuning Set"'my_sql_tuning_set" does not exist for user "sysman".
Thanks for the help.
How to activate for sys isqlplus?You are logged in as sysman,
Check the user from the sql prompt.
show user
Maybe you are looking for
-
Satellite Pro M30 - error message: the user is not authorized to update BIOS
Hello I bought a Satellite Pro M30 of second hand. This one has the Bios 1.30... I would like to install the bios v1.70. I am running Windows XP Pro SP3 and tried first update in Windows.I however got the message "the user is not allowed to update BI
-
Re: Satellite Pro A100 - cannot download the Flash player to view the flash animations
Hello I have problems trying to download flash player for my laptop.It simply doesn't get it. So I can't watch the videos. It drives me crazy.I don't ' know much about laptops.I tried to recover and still no flash player.
-
Write in a txt file to variable rate
Hello I asked who need slower (100 Hz) datalogging initially and then to increase the rate of datalogging high (10 KHz) after some time. I've tried integrating variable data acquisition rates but not success. I also tried to maintain the rate of acqu
-
Is it possible to disable the side buttons on the Laser 7000 Microsoft?
I keep hitting when I leave the mouse and by disabling everything that I just entered. And I never use them. A supersizes also the screen when I can't.Thank you.
-
6520 photosmart missing PC files paper sizes printing
Help, please. Photosmart new 6520. Put everything in place and connected. Large prints of the Ipad or Iphone. I'm trying to print a photo of those held in pictures on the PC on the windows photo gallery. When select 'Print' can see the printer, paper